CIDCO MATERIAL TESTING LABORATORY SHOP NO.D-001,002,003,CLINIC, GROUND FLOOR, HIGHWAY SIDE, SANPADA RAILWAY STATION COMPLEX
SANPADA, NAVI MUMBAI
WE MAKE CITIES
SCHEDULE OF TESTING CHARGES PER SAMPLE W. E. F. 01.05.06
Sr. No. 1
2
3
4
5
6 7
8 9
10 11
Particulars of test Soil / Murum Testing: a) Set of tests viz. M.D.D. and O.M.C. b) Liquid limit, plasticity index, etc. c) Field density test( Sand Replacemt.method) Cement testing: Fineness, consistancy, initial & final setting time & compressive strength etc. Coarse Aggregate Testing: a)Flakiness index, Elongation index, Combined index. b)Gradation, Abrasion value, Impact value, Water absorption etc Fine Aggr. Testing: (SAND) a) Fineness Modulus/Sieve Analysis. b) Silt Content Test. Concrete Testing: a) Compressive Strength Test(CUBE) b) Mix design including ingradient test c) N.D.T. - U.S.P.V. Test. e) Permeability Test. Steel Testing : (Wt. variation, Ultimate Tensile Strength , % Elongation, Bend-Rebend test) Brick/Concrete Block Testing: a) Brick-Water Abn. & Comp. Strength b)Con.Block-Water Ab.& Comp.Stren. G.I. Pipe Testing : Wt./Rmt,Thickness, Internal Diameter of G.I. Pipe . Tile Testing: a) Flexural Strength b) Water Absorption c) Resistance to wear Water Testing (PH Value/Cholride/Sulphite) Metal Testing: a) Gradation, Abrasion Value, Impact Value & Water Absorption, b)Flakiness index, Elongation index & Combined index etc.for all samples c) Gradation for W.M.M. d) Gradation for G.S.B.
12
Test for Bitumen/Asphalt: a) Bitumen Extraction b) Sieve Analysis/Gradation c) Penetration / Grade of Bitumen d) Stripping value of Road Aggregates
Rate for CIDCO Departmental Samples
Rate for outside Samples
200.00 500.00 100.00
300.00 750.00 150.00
One bag One bag FIELD TEST
660.00
990.00
10 Kg.
450.00
675.00
200 Pieces of each fraction OR Five bags
500.00
750.00
One bag
50.00 50.00
75.00 75.00
60.00 2000.00 2000.00 562.00
90.00 3000.00 3000.00 844.00
435.00
653.00
320.00 380.00
480.00 570.00
100.00
150.00
One m pipe per sample
185.00 295.00 625.00
278.00 442.00 938.00
One sample = 6 Tiles One sample = 6 Tiles
300.00
450.00
500.00
750.00
One bag per sample
450.00
675.00
200 Pieces of each fraction OR Five bags
50.00 50.00
75.00 75.00
One bag per sample One bag per sample
240.00 50.00 135.00 240.00
360.00 75.00 203.00 360.00
5 5 1 5
Min. size of Sample required
10 Kg 5 Kg One sample = 3 Cubes Two bags of each ingradient per MIX One Cylindrical Cube per sample One sample = 3 Nos of each diameter of one m length 10 Bricks 8 Blocks
One sample = 6 Pieces of size 7cm x 7cm
One lit. sealed bottle per sample
Kg Kg Kg. Kg
* In addition to above Rates, Service Tax will be applicable as per the Government Rule.
LABORATORY-IN-CHARGE