Check List For Packet Abis.docx

CHECKLIST FOR PABIS Circle name: BSC Name: SHIFT: A

BCF no: B

Engineer:

Date:

C

PRECHECK  

Take ZERO ,ZDSB,ZESI ,ZEQO:BTS=BTSID:MIS logs Check whether OSC is enabled for the sites

POSTCHECK  Check the site configuration  Check for the site alarms

1. Traffic shaping Misconfiguration 2. D channel failure 3. Traffic channel activation failure  

Check GTRX whether created as per CR. Delete unused LAPD’S and DAP Time slot



Check the BVCI Status WO

      

No

Yes Yes Yes

No No No

Yes Yes

No No

Unblock

Check whether GENA is enabled as per given PSEI. If OSC enabled sites , change the DHRLIM value  

Yes

Yes Yes

No No

Check the BCF Parameters.

Packet Abis Congestion Control (PACC) BU1 Abis Throughput Threshold(BU1) BU2 Abis Throughput Threshold(BU2) Packet Loss on DL Abis PL1 Threshold(PL1) Packet Loss on DL Abis PL2 Threshold(PL2) DL Committed Information Rate(DLCIR) Uplink Traffic Shaping(ULTS) UL Committed Information Rate(ULCIR)  UL Committed Burst Size(ULCBS)  Maximum BTS Multiplexing Wait Time(MBMWT)

Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes

No No No No No No No No No No

 Maximum ETP Multiplexing Wait Time(MEMWT)  Maximum Multiplexing Packet Size(MMPS) Enable GCTF, CDED, and CDEF value whether enabled as per CR.  Reply in PT4

Yes Yes Yes

Share the logs in the following path S:\SHARED_FOLDER_HUTCH_CM\CM_BSS\QA_NI TEAM\QUALITY TEAM\QA\packet abis\PACKET ABIS ACTIVITY LOG Send the status mail after completing activity

Remarks:

No No No