Hands-On Microsoft Windows Server 2003
Chapter 3 Solutions Review Questions 1.
Your Windows Server 2003 needs to communicate with a NetWare server that uses IPX routing and applications that use SAP services. What protocol should you configure and how should you configure it? Answer: c. NWLink configured with an internal network number
2.
For which protocol might you have to configure a frame type? Answer: b. NWLink
3.
One of your critical system files has been overwritten. What utility can you use to have Windows scan and replace protected system files? Answer: a. System File Checker
4.
What capability enables automatic detection of new computer hardware when it is attached to a computer/ Answer: b. Plug and Play
5.
What is the difference between the hibernate and standby modes? Answer: d. The memory contents are not written to disk in standby mode, but they are in hibernate mode.
6.
Once you have created a hardware profile, what tool should you use to disable specific devices? Answer: d. Device Manager
7.
The Sigverif tool is used to verify system and critical files to determine if they have a ________________________. Answer: c. signature
8.
Your server system has 512 MB of RAM. What should the initial amount of virtual memory be set to? Answer: b. 768 MB
9.
You are concerned about employees installing drivers that are not compatible with Windows Server 2003. Which of the following is the best way to prevent them from installing driver software that may cause damage to the operating system? Answer: c. Configure driver signing to block the installation of unsigned driver software.
10. Which of the following are root keys in the Windows Server 2003 registry? Choose all that apply? Answer: a., b., c., and d. 11. You have set up NWLink so that your Windows 2003 server can communicate with several older NetWare 3.x and 4.x servers in your enterprise. In the process of configuring NWLink, you let it automatically determine the frame type; however, now that it is set up you have problems communicating with some of the NetWare servers. What might you try? Answer: c. Find out if the NetWare servers and server applications communicate using more than one frame type. 12. Your organization’s Windows 2003 server provides file and print services for users on the network, such as access to folders containing archived and active Word documents and other folders containing spreadsheets. When configuring the properties for File and Printer Sharing for Microsoft Networks which option should you select? Answer: b. Maximize data throughput for file sharing
1
Hands-On Microsoft Windows Server 2003 13. Your server is about two weeks old and has Windows Server 2003 installed. You are now experiencing problems with the floppy disk drive; there are times when it does not seem to communicate with the server. Which tool can help you test the floppy drive? Answer: c. Control Panel Add Hardware tool 14. You have noticed lately that your server is running very slowly, especially when switching between programs. You see that the C: partition is running low on space, limiting the size of your page file. You have a second partition that has 20 GB of free space. How can you move the page file from partition C: onto partition D:? Answer: d. Use the Advanced tab of the System option in Control Panel 15. From where can you set up different hardware profiles? Answer: d. Control Panel System option 16. You plan to install Internet Information Services (IIS) as a Web Application Server component. Which tool do you use? Answer: a. Add/Remove Windows Components option in the Add or Remove Programs tool 17. Your college campus has just decided to enable Macintosh computers to access your Windows Server 2003, Standard Edition. How can this be accomplished? Answer: b. Use the Network Connections tool to install AppleTalk 18. Your server did not originally come with a modem, but after you install Windows Server 2003, Standard Edition you decide to purchase and install a modem. Which of the following tools enable you to install the modem? Answer: a. Add Hardware Wizard 19. What tool enables you to determine the properties settings and driver associated with a device? Answer: a. Device Manager 20. Which of the following are elements of the Windows Server 2003 registry? Choose all that apply. Answer: a. keys, c. subkeys, d. entries, and e. subtree 21. From where can you start Device Manager? Answer: b. My Computer and c. Computer Management tool as part of the Administrative tools 22. Which of the following is not a Windows Server 2003 component that you can install? Answer: c. IBM MVS File Service 23. ErrorControl:REG_DWORD:0 is an example of: Answer: c. a registry entry 24. What is the name of the program used to start the Registry Editor? Answer: d. Regedt32 25. Which of the following are types of environment variables? Answer: e. only b. and c.
2