Certificate Of Calibration Traceable To Nist

C53_pg_398-399

8/14/08

12:54 PM

Page 399

Certificate of Calibration Traceable to NIST

Test Equipment

TENMA offers a certificate of calibration traceable to NIST (National Institute of Standards and Technology) for most of the Tenma line of test and measurement instruments. Each certificate indicates the standards used in certification, the date of certification and the recommended recertification date. If you are ISO-9000 or QS-9000 certified, certification can help you maintain proper compliance documentation of your in-house instrumentation. NIST Certificate of Calibration is available by adding “C” after the model number when ordering. Please call your MCM account representative for pricing and availability.

LIMITED 2 YEAR WARRANTY

®

150MHz Digital Storage Oscilloscope

This color display DSO has been designed for a wide multitude of applications in industrial, education and service applications. For ease of operation the “Autoset” function allows for signal related automatic set-up of measuring parameters. On screen readout and cursor functions for voltage, frequency and frequency measurement provide extraordinary operational convenience. Fifteen different user defined instrument settings can be saved and recalled without restriction. The valuable “Program” mode is able to help users to record all the necessary measuring steps and replay all steps again. The special “Go-No Go” function is useful for distinguishing pass or failure conditions. This scope offers the right combination of triggering control, frequency response, and time base versatility to facilitate measurements in a wide range of applications in laboratory as well as in field service use. Other features: •Two channel 150MHz bandwidth •Sample rate up to 25GS/s ET •125K record length per channel •Large LCD 5.7" color display •Built in learn mode for tracking and training •Built in FFT function •Built in help menu •Six digit frequency counter •Built in GO/NO–GO function for manufacturing •RS-232, USB and printer port interfaces included

✔Digital storage oscilloscope ✔5.7" color LCD display ✔Six digit frequency counter ✔RS-2323 and USB interfaces

Specifications Vertical system

Bandwidth Channels Vertical sensitivity Rise time Input coupling Max. voltage between signals Real time sample rate Equivalent sample rate Record length Time base range Time base accuracy Trigger source Mode

Signal acquisition Horizontal system Trigger

Coupling X- Axis input/Y Axis input Readout

X-Y-Mode Frequency counter Control panel Dimensions/weight

150MHz 2 2mV/div - 5V/div <2.3ns 1Mohm 300V (DC+AC peak) CATII 100MS/s max. on each channel 25GS/s max. on each channel 125K CH 1ns/div to 10s/div + or - 0.01% CH-1, CH-2, LINE, EXT Auto level, auto, normal, single, TV, time delay, event delay, edge, pulse width AC, DC, HF, LF, Noise reject CH-1/CH-2 6 digit Autoset, save/recall, waveform trace save/recall

Order # 72-7235 72-7235C

section

21

Test Equipment Amprobe . . . . . . . . . .431 B+K Precision . . .421~423 Byte Brothers . . . . . . .440 EE Tools . . . . . . . . . .441 Electronic Design Specialists . . . . . . . .429 Fluke . . . . . . . . .424~428 Fluke Networks . . . . .428 Gale . . . . . . . . . . . . .436 Gold Line . . . . . . . . .429 Holaday . . . . . . . . . .441 Holland . . . . . . . . . . .434 Hoyt . . . . . . . . . . . . .434 Huntron . . . . . . . . . . .436 JDSU/Test-Um . . .432~434 J.S. Popper . . . . . . . .440

Bandwidth 150MHz Digital Storage Oscilloscope With Calibration Certificate

Mueller . . . . . . . . . . .439 NTE . . . . . . . . . . . . .440 NTI . . . . . . . . . . . . . .429 Peak . . . . . . . . . . . . .440 Pomona . . . . . . .438, 439 Progressive Electronics . . . . . . . .430 Psiber Data . . . . . . . .423 Simpson . . . . . . . . . .441 Tenma . . . . . . . .399~420 TPI . . . . . . . . . . . . . .440 Triplett . . . . . . . .435, 436 Uni-T . . . . . . . . . . . .420 Velleman . . . . . . . . . .437 Wi-Spy . . . . . . . . . . .441

MSRP $1500.00

(ea.) $1338.00 Call For Pricing

5.6" (H) x 12.2" (W) x 10" (D)/9 lbs.

®

100MHz Oscilloscope with Cursor Readout

LIMITED 2 YEAR WARRANTY

Specifications Vertical bandwidth Sensitivity Rise time Input impedance Maximum input voltage Horizontal sweep Delay time Dimensions/weight Order # 72-6820 72-6820C

21

✔Cursor readout with seven measurement functions ✔6" monochrome CRT display Features: •Dual channel •Dual trace •Dual time base •Delayed sweep •Cursor readout with seven measurement functions (ΔV, ΔV%, ΔdB, ΔT, 1/ΔT, ΔT%, Δθ) •Ten memory front panel settings save and recall •Front panel set-up lock •End of range audiable alarm •Autorange time base function •6" rectangular CRT with internal graticule •Scale illumination with intensity control •Trace and readout intensity •16KV acceleration voltage •Display modes: CH-1, CH-2, DUAL, ALT, CHOP, ADD, CH-2 INV •Input coupling: AC/GND/DC •Sweep modes: A, B (delay), ALT, X–Y, X10 magnification •Trigger modes: AUTO, NORM, TV •Trigger sources: CH-1, CH-2, LINE, EXT •Trigger hold off •Trigger level lock •TV synchronization •Trigger slope: + or – •Trigger signal output •Z axis input for intensity modulation •Power requirements: 100V, 120V, 230VAC, 50/60Hz •Includes two 10:1 probes and owners manual DC coupled: DC~100MHz(-3dB) AC coupled: 10Hz~100MHz(-3dB) 2mV/div~5V/div (11 steps 1-2-5 sequence) 3.5ns 1MΩ shunted by 25pF 400V (DC + AC peak) Time base A: 50ns/div~0.5s/div (22 steps 1-2-5 sequence) Time base B(delay): 50ns/div~50ms/div (19 steps 1-2-5 sequence) 1µs~5s 121⁄4" (W) x 53⁄4" (H) x 18" (D)/19 lbs.

Description 100MHz Oscilloscope with Cursor Readout With Calibration Certificate

MSRP $1200.00

(ea.) $1025.00 Call For Pricing

www.mcmelectronics.com

NET 30 Terms

399

C53_pg_400-401

section

21

8/14/08

12:55 PM

Page 400

Test Equipment ®

LIMITED 2 YEAR WARRANTY

35MHz Oscilloscope

Features: •Dual channel •Dual trace •6" rectangular CRT with internal graticule •2KV acceleration voltage •High sensitivity 1mV/div •Display modes: CH-1, CH-2, DUAL, ALT, CHOP, ADD, CH-2 INV •Input coupling: AC/GND/DC •CH-1 output signal •Sweep modes: A, X–Y, X10 magnification •Trigger modes: AUTO, NORM •Trigger sources: CH-1, CH-2, ALT, LINE, EXT •Trigger hold off •Trigger level lock •TV synchronization •Trigger slope: + or – •Z axis input for intensity modulation •Power requirements: 100V, 120V, 220V, 230VAC, 50/60Hz •Includes two 10:1 probes and owners manual Specifications Vertical bandwidth Sensitivity Rise time Input impedance Maximum input voltage Horizontal sweep Dimensions/weight Order # 72-6810 72-6810C

®

DC coupled: DC~35MHz(-3dB) AC coupled: 10Hz~35MHz(-3dB) 5mV/div~5V/div (10 steps 1-2-5 sequence) 10ns 1MΩ shunted by 25pF 300V (DC + AC peak) Time base: 0.1µs/div~0.5s/div (21 steps 1-2-5 sequence) 121⁄4" (W) x 53⁄4" (H) x 18" (D)/19 lbs.

Description 35MHz Oscilloscope With Calibration Certificate

MSRP $495.00 -

(ea.) $473.00 Call For Pricing

30MHz Oscilloscope with Frequency Counter

In addition to conventional scope functions, this model includes a five digit LCD digital display, showing frequency, voltage and time base of the inputted signal. Additionally, the Auto Time Base function automatically selects the appropriate horizontal time base for waveform display. An internal alarm advises the user when vertical/horizontal setting reaches the min or max boundary. Other features: •Dual channel •Dual trace •6" high brightness CRT with internal graticule •2KV acceleration voltage •1mV/div vertical sensitivity for small signal measurement •Display modes: CH-1, CH-2, Dual, Add, X-Y •Trigger modes: Auto, norm, TV-V, TV-H •Input coupling: AC, DC, GND •Trigger sources: CH-1, CH-2, Alt, line, external •Trigger slope + or - •Z axis input for intensity modulation •Power requirements: 115/230VAC, 60jz/50Hz ±15% •Includes two 10:1 probes and instruction manual ✔Internal five digit frequency counter ✔6" monochrome CRT display

Specifications Vertical bandwidth Sensitivity Rise time Input impedance Maximum input voltage Horizontal sweep

0~20MHz, 1mV/div ≤ 3% 0~7MHz, 2mV/div ≤ 5% 1mV~1V/division selectable in 12 steps 11.7ns (1mV/div) 1MΩ 300V (DC + AC peak) 0.2µSec~0.5Sec/div in 20 steps

Frequency Counter Display digits Frequency range Accuracy Measuring Sensitivity Dimensions/weight:

Five 50Hz~30MHz ±0.05% >2div 12 1⁄4" (W) x 53⁄4" (H) x 18" (D), 19 lbs.

Order # 72-6802 72-6802C

Description 30MHz Oscilloscope with Frequency Counter With Calibration Certificate

MSRP $520.00 -

(ea.) $411.00 Call For Pricing

®

20MHz Oscilloscope with Function Generator

2 YEAR LIMITED

✔Internal 1MHz function generator WARRANTY ✔6" monochrome CRT display Features: •Dual channel •Dual trace •Built–in 1MHz function generator with sine, square and triangle wave output •6" rectangular CRT with internal graticule •2KV acceleration voltage •High sensitivity 1mV/div •Display modes: CH-1, CH-2, DUAL, ALT, CHOP, ADD, CH-2 INV •Input coupling: AC/GND/DC •CH-1 output signal •Sweep modes: A, X–Y, X10 magnification •Trigger modes: AUTO, NORM, TV–V, TV–H •Trigger sources: CH-1, CH-2, ALT, LINE, EXT •Trigger slope: + or – •Z axis input for intensity modulation •Power requirements: 115/230VAC, 50/60Hz •Includes two 10:1 probes and owners manual

21

Specifications Vertical bandwidth Sensitivity Rise time Input impedance Maximum input voltage Horizontal sweep Function generator range Variable range Output impedance Output voltage Dimensions/weight Order # 72-6805 72-6805C

400

1-800-543-4330 Fax 1-800-765-6960

DC coupled: DC~20MHz (-3dB) AC coupled: 10Hz~20MHz (-3dB) 5mV/div~5V/div (10 steps 1-2-5 sequence) 17.5ns 1MΩ shunted by 25pF 300V (DC + AC peak) Time base: 0.2µs/div~0.5s/div (20 steps 1-2-5 sequence) 0.1Hz~1MHz (7 steps) >10:1 50Ω 14V p-p max. (open circuit), ±6VDC offset 121⁄4" (W) x 53⁄4" (H) x 18" (D)/19 lbs.

Description 20MHz Oscilloscope with Function Generator With Calibration Certificate

MSRP $520.00 -

(ea.) $473.00 Call For Pricing

C53_pg_400-401

8/14/08

12:55 PM

Page 401

Test Equipment ®

LIMITED 2 YEAR WARRANTY

20MHz Oscilloscope

✔6" monochrome CRT display Features: •Dual channel •Dual trace •6" rectangular CRT with internal graticule •2KV acceleration voltage •High sensitivity 1mV/div •Display modes: CH-1, CH-2, DUAL, ALT, CHOP, ADD, CH-2 INV •Input coupling: AC/GND/DC •CH-1 output signal •Sweep modes: A, X–Y, X10 magnification •Trigger modes: AUTO, NORM, TV–V, TV–H •Trigger sources: CH-1, CH-2, ALT, LINE, EXT •Trigger slope: + or – •Z axis input for intensity modulation •Power requirements: 115/230VAC, 50/60Hz •Includes two 10:1 probes and owners manual Specifications Vertical bandwidth Sensitivity Rise time Input impedance Maximum input voltage Horizontal sweep Dimensions/weight Order # 72-6800 72-6800C

section

21

DC coupled: DC~20MHz (-3dB) AC coupled: 10Hz~20MHz (-3dB) 5mV/div~5V/div (10 steps 1-2-5 sequence) 17.5ns 1MΩ shunted by 25pF 300V (DC + AC peak) Time base: 0.2µs/div~0.5s/div (20 steps 1-2-5 sequence) 121⁄4" (W) x 53⁄4" (H) x 18" (D)/19 lbs.

Description 20MHz Oscilloscope With Calibration Certificate

MSRP $450.00

(ea.) $407.00 Call For Pricing

®

60, 100, 200 and 250MHz Oscilloscope Probe Kits

100MHz Oscilloscope Probe Kit Features: •Insulated BNC •Ideal for portable oscilloscope and other portable instruments •x1/x10 attenuation •1.2m cable length •10~35pF compensation adjustment •600V maximum input (DC+AC peak) •Meets IEC61010–2–031 CAT I 600V requirements •90 day warranty •Includes accessory kit and storage pouch

Features: •X1/X10 attenuation (#76-107 is X10 only) •1Mohm (X1) and 10Mohm (X10) input impedance •1.2m cable length •10-35pF compensation adjustment •Low noise, improved compensation •#76-107 includes a readout actuator pin on the BNC connector •Meets EN61010-2-031 CAT I (IEC1010) requirements •600V maximum (DC+AC peak) •Includes accessory kit and storage pouch. Specifications 76-109 76-102 76-105 76-106, 76-107 Order # 76-109 76-102 76-105 76-106 76-107 76-110

Bandwidth (X10 position) 60MHz (-3dB) into 18pF 100MHz (-3dB) into 16pF 200MHz (-3dB) into 14pF 250MHz (-3dB) into 14pF

Specifications Bandwidth (x10) Risetime (x10) Input impedance (x1/x10)

Risetime (X10 position) <5.8nsec <3.5nsec <1.8nsec <1.4nsec

Description 60MHz Oscilloscope Probe Kit 100MHz Oscilloscope Probe Kit 200MHz Oscilloscope Probe Kit 250MHz Oscilloscope Probe Kit 250MHz Oscilloscope Probe Kit w/RO Replacement Sprung Hook

Order # 76-123

100MHz (-3dB) into 16pF <3.5nsec 1MΩ/10MΩ

I.R. Remote Control Test Plug Compact plug simply fits onto the BNC socket of an oscilloscope. When an infrared source, e.g. remote control, is pointed at the unit, the signal waveform can be seen on the oscilloscope screen. It is ideal for identifying problems with remote controls and assisting in complex home automation remote programming. •Dimensions: 0.55" (dia) x 1.57" (L) Order # 72-7507

MSRP $29.95

(ea.) $21.95

(ea.) $42.95

Swivel Base BNC Antenna Great for non-contact test of RF transmitting products. Connects to frequency counter, spectrum analyzer and other RF test equipment with BNC input. Features: •Swivel base telescopic antenna with BNC connector •24" extended length •1.8MHz~1800MHz frequency range

(ea.) $26.95 37.95 47.95 73.95 63.95 5.59

Order 72-6601

(ea.) $12.49

®

LIMITED 2 YEAR WARRANTY

1GHz Spectrum Analyzer

Specifications Frequency range Stability Frequency spans Reference level range/accuracy Noise floor Amplitude accuracy Input overload protection Input impedance Dimensions/weight Order # 72-6696 72-6696C

21

Features: •Frequency range of 150KHz~1GHz (useable to 1.15GHz) •Internal audio demodulator with headphone output •Digital phase lock loop design •Multifunction 61⁄2 digit LCD display •Two markers for absolute and relative measurement •Functions: Max hold, average (2~32 traces), freeze, peak search, center markers •9 memory save/recall locations •Power requirements: 100V, 120V, 220V, 230VAC, 50/60Hz •Includes owners manual 150KHz~1GHz (useable to 1.15GHz) ±2 ppm/year aging, ±10 ppm 0~50°C 0, 2KHz~100MHz/div (1-2-5 sequence) -30dBm~+20dBm/±1dBm at 50MHz -95dBm at 30KHz RBW ±1.5 dB typical at 0 dBm +30dBm continuous, ±25VDC 50Ω 121⁄4" (W) x 6" (H) x 18" (D)/19 lbs.

Description 1GHz Spectrum Analyzer With Calibration Certificate

MSRP $2400.00 -

(ea.) $2163.00 Call For Pricing

www.mcmelectronics.com

NET 30 Terms

401

C53_pg_402-403

section

21

8/14/08

12:56 PM

Page 402

Test Equipment

®

True RMS Benchtop Digital Multimeter

®

✔40,000 count LCD display ✔True RMS measurement ✔USB interface and data logging software ✔AC and battery operation Ideal for the service bench or lab where high accuracy is important. This unit measures AC/DC voltage and current, resistance, capacitance, frequency, and temperature. It also provides diode and audible continuity test, as well as 4~20mA loop testing. Features: •AC or battery operation •40,000 count, 41/2 digit primary display •Dual 4,000 count, 31/2 digit sub displays •40 segment analog bargraph •Data logging of 9,999 readings •USB and RS-232 serial interfaces •Fused current measurement to 10A •AC or AC+DC TRMS measurement •Backlit display •10Mohm input impedance •Ultra sensitive 4,000Mohm input impedance on 400mV range •Switchable auto/manual range •Detailed 70 page instruction manual •Includes test leads, alligator clip adaptors, temperature probe, RS-232 and USB interface cables and software Specifications DC voltage AC voltage AC bandwidth DC current AC current Resistance Capacitance Temperature

Range 400mV, 4V, 40V,400V, 1000V 4V, 40V, 400V,1000V 100KHz 40µA, 4000µA,40mA, 400mA, 10A 40µA, 4000µA,40mA, 400mA, 10A 400Ω, 4KΩ, 40KΩ,400KΩ, 4MΩ, 40MΩ 40nF, 400nF, 4µF, 40µF,400µF, 4mF, 40mF -40°C~1000°C -40°F~1832°F 40Hz, 400Hz, 4KHz, 40KHz,400KHz, 4MHz, 40MHz, 400MHz 10MΩ (4GΩ on 400mV range) 4" (H) x 9 5/8" (W) x 11 3/4" (D)

Frequency Input impedance Dimensions Order# 72-1020 72-1020C

Description True RMS Benchtop Digital Multimeter With Calibration Certificate

Accuracy ±(0.025%+5) ±(0.4% +30) – ±(0.1%+15) ±(0.7%+15) ±(0.3%+40) ±(1%+20) ±(1%+30) ±(1.5%+50) ±(0.01%+8) – –

MSRP $399.00

Benchtop True RMS Multimeter with USB

✔6,000 count LCD display ✔True RMS measurement ✔USB interface and data logging software ✔AC and battery operation Ideal for the service bench or in the classroom, this unit measures AC/DC voltage and current, resistance, capacitance, frequency, transistor hFE and temperature. It also provides diode and audible continuity test. Features: •AC or battery operation •6000 count, 33⁄4 digit display •USB and RS-232 serial interfaces •Fused current measurement to 10A •AC or AC+DC TRMS measurement •Backlit display •10Mohm input impedance •Ultra sensitive 3,000Mohm input impedance on 600mV range •Switchable auto/manual range •Detailed 50 page instruction manual •Includes test leads, alligator clip adaptors, temperature probe, RS-232 interface cables and software Specifications DC voltage AC voltage DC current AC current Resistance Capacitance Temperature

Range Accuracy 600mV, 6V, 60V, 600V, 1000V ±(0.3%+1) 600mV, 6V, 60V, 600V, 1000V ±(0.5% +2) 60µA, 6mA, 60mA, 600mA, 10A ±(0.5%+1) 60µA, 6mA, 60mA, 600mA, 10A ±(0.8%+2) 600Ω, 6KΩ, 60KΩ, 600KΩ, 6MΩ, 60MΩ ±(0.5%+1) 6nF, 60nF, 600nF, 6µF, 60µF, 600µF, 6mF ±(2%+5) -40°C~1000°C ±(1%+3) -40°F~1832°F ±(1%+3) Frequency 10Hz~50MHz ±(0.05%+3) Input impedance 10MΩ (3GΩ on 600mV range) Dimensions 41⁄4" (H) x 81⁄2" (W) x 11" (D) Order# Description MSRP (ea.) 72-1015 Benchtop True RMS Multimeter with USB $249.00 $188.00 72-1015C With Calibration Certificate - Call For Pricing

(ea.) $261.00 Call For Pricing

®

True RMS Multimeter with USB Interface

21

✔39,999 count display with bargraph ✔Dual secondary displays ✔True-RMS measurement ✔USB interface with data logging software Compact hand held instrument boasts 40,000 count display and optically isolated USB interface, rivaling features and accuracy of many benchtop units. It measures AC/DC voltage, AC/DC current, resistance, capacitance, temperature, frequency and duty cycle. Triple display features 1⁄2" primary digits and dual 1⁄4" secondary displays, plus an analog bargraph and numerous on-screen icons. Features: •True RMS measurement •AC+DC measurement •Selectable auto/manual range •Data logging and recall of up to 10,000 internally stored records •Peak hold •Max/min mode •Relative mode •Data hold •4~20mA current loop measurement •Dual level backlit display •Sleep mode Kit includes: •4' USB cable and software •Standard test leads •Short clip leads for accurate capacitance measurement •Alligator clip adaptors •Standard 9V battery •Soft case •Detailed instruction manual Specifications DC voltage AC voltage AC bandwidth DC current AC current Resistance Capacitance Temperature Frequency Duty cycle Current loop Input impedance Dimensions Order# 72-7732 72-7732C

402

Range 400mV, 4V, 40V, 400V, 1000V 4V, 40V, 400V, 1000V 100KHz 400µA, 4000µA, 40mA, 400mA, 10A 400µA, 4000µA, 40mA, 400mA, 10A 400Ω, 4KΩ, 40KΩ, 400KΩ, 4MΩ, 40MΩ 40nF, 400nF, 4µF, 40µF, 400µF, 4mF, 40mF -40° C~1000° C -40° F~1832° F 40Hz, 400Hz, 4KHz, 40KHz, 400KHz, 4MHz, 40MHz, 400MHz 10%~90% 4~20mA displays 0~100% 10MΩ (2.5GΩ on 200mV range) 8" (H) x 35⁄8" (W) x 11⁄2" (D)

Description True RMS Multimeter with USB Interface With Calibration Certificate

MSRP $239.95

Accuracy ±(0.025%+5) ±(0.4% +30) ±(0.1%+15) ±(0.7%+15) ±(0.3%+8) ±(1%+20) ±(1%+30) ±(1.5%+50) ±(0.01%+8) ±(1%+30) ±(1%+50)

(ea.) $189.00 Call For Pricing

®

True RMS Multimeter with USB Interface ✔19,999 count display with bargraph ✔Dual secondary displays ✔True-RMS measurement ✔USB interface with data logging software Full function multimeter offers a variety of ranges for every service application, the accuracy of a 19,999 count display, and an optically isolated USB interface. It measures AC/DC voltage, AC/DC current, resistance, capacitance, temperature, frequency and duty cycle. Triple display features 1⁄2" primary digits and dual 1⁄4" secondary displays, plus an analog bargraph and numerous on-screen icons. Features: •True RMS measurement •AC+DC measurement •Selectable auto/manual range •Data logging and data recall •Peak hold •Max/min mode •Relative mode •Data hold •4~20mA current loop measurement •Dual level backlit display •Sleep mode Kit includes: •4' opto-coupled USB cable •Data logging software •Standard test leads •Short clip leads for accurate capacitance measurement •Alligator clip adaptors •Standard 9V battery •Soft case •Detailed instruction manual Specifications DC voltage AC voltage DC current AC current Resistance Capacitance Temperature Frequency Duty cycle Current loop Input impedance Dimensions Order# 72-7730 72-7730C

1-800-543-4330 Fax 1-800-765-6960

Range 200mV, 2V, 20V, 200V, 1000V 2V, 20V, 200V, 1000V 200µA, 2000µA, 20mA, 200mA, 10A 200µA, 2000µA, 20mA, 200mA, 10A 200Ω, 2KΩ, 20KΩ, 200KΩ, 2MΩ, 20MΩ 20nF, 200nF, 2µF, 20µF, 200µF, 2mF, 20mF -40°C~1000°C -40°F~1832°F 20Hz, 200Hz, 2KHz, 20KHz, 200KHz, 2MHz, 20MHz, 200MHz 10%~90% 4~20mA displays 0~100% 10MΩ (2.5GΩ on 200mV range) 8" (H) x 35⁄8" (W) x 11⁄2" (D)

Description Handheld True RMS Multimeter with USB With Calibration Certificate

MSRP $199.95

Accuracy ±(0.05%+5) ±(0.6% +40) ±(0.1%+15) ±(1.8%+15) ±(0.4%+20) ±(1.2%+20) ±(1%+30) ±(1.5%+50) ±(0.1%+15) ±(1%+30) ±(1%+50)

(ea.) $159.00 Call For Pricing

C53_pg_402-403

8/14/08

12:56 PM

Page 403

Test Equipment ®

section

21

Autoranging Multimeter with RS-232 ✔5,999 count display ✔Measures °C temperature ✔Measures capacitance ✔RS-232 interface with data logging software High accuracy, 5999 count multimeter offers a variety of ranges for every service application, plus an optically isolated RS-232 interface. Rugged overmolded housing stands up to the daily rigors of field service use, and large LCD display is easily read from several feet away. Measures AC/DC voltage, AC/DC current, resistance, capacitance, temperature and frequency. 33⁄4 digit, 5999 count backlit display features 3⁄4" digits and numerous on-screen icons, for easy at-a-glance reading. Features: •Switchable auto/manual range •Diode check •Continuity buzzer •Data hold •Low battery display •Sleep mode •Included standard test leads, plus separate short leads for accurate capacitance checking •Includes 4' opto-coupled RS-232 cable with female DB9 connector and datalogging software •Comes complete with standard 9V battery and owners manual •Meets 600V CATIII, and 1000V CATII standards Specifications DC voltage AC voltage DC current AC current Resistance Capacitance Temperature Frequency Input impedance Dimensions Order# 72-7750 72-7750C

Range 600mV, 6V, 60V, 600V, 1000V 600mV, 6V, 60V, 600V, 1000V 60mA, 600mA, 10A 60mA, 600mA, 10A 600Ω, 6KΩ, 60KΩ, 600KΩ, 6MΩ, 60MΩ 6nF, 60nF, 600nF, 6µF, 60µF, 600µF, 6mF -40°C~1000°C 6KHz, 60KHz, 600KHz, 6MHz, 60MHz 10MΩ 63⁄4" (H) x 33⁄8" (W) x 11⁄2" (D)

Description Autoranging Multimeter with RS-232 With Calibration Certificate

MSRP $94.95 -

Accuracy ±(0.5%+3) ±(1% +2) ±(1.2%+3) ±(2%+5) ±(1%+2) ±(3%+5) ±(1%+3) ±(0.05%+3)

(ea.) $72.95 Call For Pricing

®

Autoranging Multimeter with Temperature ✔3,999 count display ✔Measures °C temperature ✔Measures capacitance Full function multimeter offers a variety of ranges for every service application, plus Celsius temperature measurement. Rugged overmolded housing stands up to the daily rigors of field service use, and large LCD display is easily read from several feet away. Measures AC/DC voltage, AC/DC current, resistance, capacitance, temperature, frequency and duty cycle. 33⁄4 digit, 3999 count display features 3⁄4" digits and numerous on-screen icons, for easy at-a-glance reading. Features: •Switchable auto/manual range •Diode check •Continuity buzzer •Data hold •Relative hold •Low battery display •Included standard test leads, plus separate short leads for accurate capacitance checking •Thermocouple temperature probe •Comes complete with standard 9V battery and owners manual •Meets 600V CATIII, and 1000V CATII standards Specifications DC voltage AC voltage DC current AC current Resistance Capacitance Temperature Frequency Duty cycle Input impedance Dimensions Order# 72-7740 72-7740C

Range 400mV, 4V, 40V, 400V, 1000V 4V, 40V, 400V, 750V 400µA, 4000µA, 40mA, 400mA, 4A, 10A 400µA, 4000µA, 40mA, 400mA, 4A, 10A 400Ω, 4KΩ, 40KΩ, 400KΩ, 4MΩ, 40MΩ 40nF, 400nF, 4µF, 40µF, 100µF -40°C~1000°C 10Hz~10MHz 0.1%~99.9% 10MΩ 63⁄4" (H) x 33⁄8" (W) x 11⁄2" (D) Description Autoranging Multimeter with Temperature With Calibration Certificate

Accuracy ±(0.8%+1) ±(1% +5) ±(1%+2) ±(1.5%+5) ±(1%+2) ±(3%+5) ±(1%+3) ±(0.1%+3)

MSRP $79.95

(ea.) $62.95 Call For Pricing

®

Autoranging Multimeter with RS-232 ®

Large Display Multimeter with Temperature Full function multimeter offers the unique feature of on-screen display of correct lead connection. As various measurement modes are selected, the display changes to clearly identify which test probe inputs are to be used. This unit is perfect for the classroom or occasional user. The rugged molded housing uses a specially designed holder to stand up to the daily rigors of field service use, and the large LCD display is easily read from several feet away. Measures AC/DC voltage, AC/DC current, resistance, capacitance, temperature and frequency. 31⁄2 digit, 1999 count display features 1" digits for easy at-a-glance reading. Features: •Diode check •Continuity buzzer •Data hold •Low battery display •Included standard test leads •Comes complete with standard 9V battery and owners manual •Meets 600V CATIII, and 1000V CATII standards Specifications DC voltage AC voltage DC current AC current Resistance Capacitance Temperature Frequency Input impedance Dimensions Order# 72-7930 72-7930C

Range 200mV, 2V, 20V, 200V, 1000V 2V, 20V, 200V, 1000V 2mA, 200mA, 20A 2mA, 200mA, 20A 200Ω, 2KΩ, 20KΩ, 2MΩ, 20MΩ 2nF, 200nF, 100µF -40°F~1800°F 2KHz, 20KHz 10MΩ 63⁄4" (H) x 33⁄8" (W) x 11⁄2" (D)

Description Large Display Multimeter with Temperature With Calibration Certificate

Accuracy ±(0.5%+1) ±(0.8% +3) ±(0.8%+1) ±(1%+3) ±(0.8%+1) ±(4%+3) ±(2%+3) ±(1.5%+5)

MSRP $59.95 -

(ea.) $47.95 Call For Pricing

Specifications DC voltage AC voltage DC current AC current Resistance Capacitance Frequency Duty cycle Input impedance Dimensions Order# 72-7735 72-7735C

21

✔3,999 count display ✔RS-232 interface with data logging software Full function multimeter offers a variety of ranges for every service application, plus provides an optically isolated RS-232 interface. Rugged overmolded housing stands up to the daily rigors of field service use, and large LCD display is easily read from several feet away. Measures AC/DC voltage, AC/DC current, resistance, capacitance, frequency and duty cycle. 33⁄4 digit, 3999 count display features 3⁄4" digits and numerous on-screen icons, for easy at-a-glance reading. Features: •Switchable auto/manual range •Diode check •Continuity buzzer •Data hold •Relative hold •Low battery display •Included standard test leads, plus separate short leads for accurate capacitance checking •Includes 4' opto-coupled RS-232 cable with female DB9 connector and datalogging software •Comes complete with standard 9V battery and owners manual •Meets 600V CATIII, and 1000V CATII standards Range 400mV, 4V, 40V, 400V, 1000V 4V, 40V, 400V, 750V 400µA, 4000µA, 40mA, 400mA, 4A, 10A 400µA, 4000µA, 40mA, 400mA, 4A, 10A 400Ω, 4KΩ, 40KΩ, 400KΩ, 4MΩ, 40MΩ 40nF, 400nF, 4µF, 40µF, 100µF 10Hz~10MHz 0.1%~99.9% 10MΩ 63⁄4" (H) x 33⁄8" (W) x 11⁄2" (D) Description Handheld Multimeter with RS-232 With Calibration Certificate

www.mcmelectronics.com

NET 30 Terms

MSRP $59.95

Accuracy ±(0.8%+1) ±(1% +5) ±(1%+2) ±(1.5%+5) ±(1%+2) ±(3%+5) ±(0.1%+3)

(ea.) $47.95 Call For Pricing

403

C53_pg_404-405

section

21

8/14/08

12:57 PM

Page 404

Test Equipment ®

Large Display Digital Multimeter ✔1,999 count display ✔Measures capacitance Full function multimeter offers a variety of ranges for every service application. Rugged overmolded housing stands up to the daily rigors of field service use, and large backlit LCD display is easily read from several feet away. Measures AC/DC voltage, AC/DC current, resistance and capacitance. 31⁄2 digit, 1999 count display features 7⁄8" digits for easy at–a–glance reading. Features: •Continuity buzzer •Data hold •Full icon display •Sleep mode •Low battery display •Included standard test leads, plus separate short leads for accurate capacitance checking •Includes standard 9V battery and owners manual •Meets 1000V CATII standards

®

Digital Multimeter with Temperature ✔1,999 count display ✔Measures capacitance ✔Measures °F and °C temperature Full function multimeter offers a variety of ranges for every service application, including Fahrenheit and Celsius temperature measurement. Rugged overmolded housing stands up to the daily rigors of field service use, and large backlit LCD display is easily read from several feet away. Measures AC/DC voltage, AC/DC current, resistance, capacitance frequency and temperature. 31⁄2 digit, 1999 count display features 7⁄8" digits for easy at-a-glance reading. Features: •Continuity buzzer •Data hold •Full icon display •Sleep mode •Low battery display •Included standard test leads, plus separate short leads for accurate capacitance checking •Includes standard 9V battery and owners manual •Meets 1000V CATII standards Specifications DC voltage AC voltage DC current AC current Resistance Capacitance Temperature (°C) Temperature (°F) Frequency Input impedance Dimensions

Range 200mV, 2V, 20V, 200V, 1000V 2V, 20V, 200V, 750V 20mA, 200mA, 20A 20mA, 200mA, 20A 200Ω, 2KΩ, 20KΩ, 200KΩ, 2MΩ, 20MΩ, 200MΩ 20nF, 200nF, 2µF, 100µF -40°C~1000°C -40°~1832° 2KHz~20KHz 10MΩ 61⁄2" (H) x 31⁄4" (W) x 11⁄4" (D)

Order# 72-7725 72-7725C

Description Digital Multimeter with Temperature With Calibration Certificate

MSRP $49.95

21

✔1,999 count display ✔Measures °F temperature ✔Measures transistor hFE and capacitance Full function multimeter offers a variety of ranges for every service application, including Fahrenheit temperature measurement, capacitance and transistor hFE. Rugged molded housing uses a specially designed holder to stand up to the daily rigors of field service use. The large LCD display is easily read from several feet away. Measures AC/DC voltage, AC/DC current, resistance, capacitance, temperature, frequency and duty cycle. 31⁄2" digit, 1999 count display features 3⁄4" digits for easy at-a-glance reading. Features: •Diode check •Continuity buzzer •Data hold •Low battery display •Included standard test leads •Comes complete with standard 9V battery and owners manual •Meets 600V CATII, and 1000V CATI standards

Order# 72-7925 72-7925C

404

Description Large Display Multimeter with Transistor hFE With Calibration Certificate

Accuracy ±(0.5%+1) ±(0.8% +3) ±(0.8%+1) ±(1%+3) ±(0.8%+10) ±(4%+3) ±(2%+8) ±(1.5%+5)

MSRP $54.95

(ea.) $41.95 Call For Pricing

Description Large Display Digital Multimeter With Calibration Certificate

MSRP $39.95

Accuracy ±(0.5%+1) ±(0.8% +3) ±(0.8%+1) ±(1%+3) ±(0.8%+1) ±(4%+3)

(ea.) $29.95 Call For Pricing

✔1,999 count display ✔Compact palm size ✔Provides square wave output Compact meter features a wide range of measurement capabilities, and is ergonomically designed to easily fit in the palm of your hand. 31⁄2 digit, 1999 count display measures AC/DC voltage, DC current, ohms and diode check. Features: •Backlit LCD display with 1⁄2" high digits •Square wave output •Continuity buzzer •Protective holster •Includes test leads, standard 9V battery and owners manual •Meets 600V CATI standards Specifications DC voltage AC voltage DC current Resistance Input impedance Dimensions Order# 72-7770 72-7770C

Range 200mV, 2000mV, 20V, 200V, 500V 200V, 500V 2000µA, 20mA, 200mA, 10A 200Ω, 2000Ω, 20KΩ, 200KΩ, 20MΩ, 200MΩ 10MΩ 53⁄8" (H) x 3" (W) x 13⁄8" (D) Description Compact Digital Multimeter With Calibration Certificate

MSRP $15.95

Accuracy ±(0.5%+2) ±(1.2% +10) ±(0.8%+2) ±(.08%+2)

(ea.) $12.69 Call For Pricing

Compact Digital Multimeter ✔3,999 count display ✔Compact palm size ✔Measures transistor hFE Autoranging meter features a wide range of measurement capabilities, and is ergonomically designed to easily fit in the palm of your hand. 33⁄4 digit, 3999 count display measures AC/DC voltage and current, ohms, diode check and transistor hFE. Features: •1⁄2" high LCD digits •Continuity buzzer •Protective holster •Includes test leads, standard 9V battery and owners manual •Meets 600V CATI standards Specifications DC voltage AC voltage DC current AC current Resistance Input impedance Dimensions Order# 72-7765 72-7765C

1-800-543-4330 Fax 1-800-765-6960

Range 200mV, 2V, 20V, 200V, 1000V 200mV, 2V, 20V, 200V, 750V 20µA, 2mA, 200mA, 20A 200µA, 2mA, 20mA, 200mA, 20A 200Ω, 2KΩ, 20KΩ, 200KΩ, 2MΩ, 20MΩ, 20MΩ, 200MΩ 2nF, 20nF, 2µF, 100µF 10MΩ 61⁄2" (H) x 31⁄4" (W) x 11⁄4" (D)

Compact Digital Multimeter

(ea.) $37.95 Call For Pricing

Large Display Multimeter with Transistor hFE

Range 200mV, 2V, 20V, 200V, 1000V 2V, 20V, 200V, 750V 2mA, 200mA, 20A 2mA, 200mA, 20A 200Ω, 2KΩ, 20KΩ, 2MΩ, 20MΩ 2nF, 200nF, 20µF -40°F~1800°F 2KHz, 20KHz 10MΩ 63⁄4" (H) x 33⁄8" (W) x 11⁄2" (D)

Order# 72-7720 72-7720C

Accuracy ±(0.5%+1) ±(0.8% +3) ±(0.8%+1) ±(1%+3) ±(0.8%+1) ±(4%+3) ±(1%+3) ±(1%+4) ±(1.5%+5)

®

Specifications DC voltage AC voltage DC current AC current Resistance Capacitance Temperature Frequency Input impedance Dimensions

Specifications DC voltage AC voltage DC current AC current Resistance Capacitance Input impedance Dimensions

Range 400mV, 4V, 40V, 400V, 500V 4V, 40V, 400V, 500V 400µA, 4000µA, 40mA, 400mA, 4A, 10A 400µA, 4000µA, 40mA, 400mA, 4A, 10A 400Ω, 4KΩ, 40KΩ, 400KΩ, 4MΩ, 40MΩ 10MΩ 53⁄8" (H) x 3" (W) x 13⁄8" (D) Description Compact Digital Multimeter With Calibration Certificate

MSRP $24.95 -

Accuracy ±(0.8%+1) ±(1.2% +3) ±(1%+2) ±(1.5%+5) ±(1%+2)

(ea.) $19.95 Call For Pricing

C53_pg_404-405

8/14/08

12:58 PM

Page 405

Test Equipment

section

21

®

1

Feature Packed Pocket Multimeter

YEAR LIMITED WARRANTY

®

Pen DMM with Logic Function Features: •Large 33⁄4 digit, 3999 count LCD display •Autoranging with auto polarity •Data hold •Auto power off •TTL logic test •AC and DC voltage and current measurement •Resistance with continuity beeper •Fuse protected current •Meets IEC-1010 safety standards 600V CAT II applications •Includes 9V battery, ground lead, alligator clip, probe tip covers and owners manual Specifications DC voltage AC voltage DC current AC current Resistance

Range 4V, 40V, 600V 4V, 40V, 600V 40mA~400mA 40mA~400mA 400Ω, 4KΩ, 40KΩ, 400KΩ, 4MΩ, 40MΩ HI/LO indicator Buzzer below 100Ω 11⁄8" (W) x 9" (L) x 11⁄2" (H)

Logic test Continuity test Dimensions Order # 72-6620 72-6620C

Max Resolution 1mV 1mV 100µA 100µA 0.1Ω

Description Pen DMM with Logic With Calibration Certificate

MSRP $39.95

Basic Accuracy ±(0.8% + 1 digit) ±(1.2% + 3 digits) ±(1.2% + 3 digits) ±(1.2% + 5 digits) ±(1.0% + 2 digits)

(ea.) $34.95 Call For Pricing

✔3,999 count display ✔Ultra compact pocket size ✔Measures capacitance ✔Includes folding pocket case Folding calculator style meter includes functions thought impossible of a unit this size. 33⁄4 digit, 3999 count display features 5⁄8" high digits, for easy viewing. Measure AC/DC voltage, resistance, frequency duty cycle and even capacitance. The meter measures only 3⁄8" thick (excluding folding case) allowing storage virtually anywhere. With permanently attached test leads, this unit is CATII rated to 300V. Requires one type CR2032 3V lithium battery (#291-510), which is included. Comes complete with folding carry case and owners manual. Specifications DC voltage AC voltage Resistance

Range 400mV, 4V, 40V, 400V, 500V 4V, 40V, 400V, 500V 400Ω, 4KΩ, 40KΩ, 400KΩ, 4MΩ, 20MΩ 4nF, 40nF, 400nF, 4µF, 40µF, 200µF 10Hz~100KHz 10MΩ 43⁄4" (H) x 31⁄4" (W) x 5⁄8" (D), including case

Capacitance Frequency Input impedance Dimensions Order# 72-7935 72-7935C

®

Logic Probe with Memory This compact and lightweight probe recognizes high, intermediate, and low level pulses in DTL, TTL, HTL, and CMOS logic circuits. Specifications: •Pulse detector (pulse-LED): High speed pulse train or single events (+ or - transitions) activate 1⁄3 second pulse stretcher •In memory position of pulse/memory switch, first transition lights and latches LED •Detectable pulse width: 50nsec minimum •Input impedance: 100Kohm •Input signal frequency: 10MHz •Input overload protection: 100V continuous, 117VAC for less than 30 seconds •Probe power: DC 5~15V/25mA~40mA •Probe power protection: 36V maximum with power lead reversal protection •Dimensions: 77⁄8" (L) x 55⁄8" (dia) •90 day warranty Order # 72-190

MSRP $29.95

(ea.) $23.95

LIMITED 1 YEAR WARRANTY ®

Order # 72-7275 72-7275C

Resolution 0.1mV 0.001V 0.01V 0.1V 20MΩ

Description Bench Top DC Volt Meter With Calibration Certificate

Accuracy ± 0.5% +1 digit ± 0.8% +1 digit ± 0.8% +1 digit ± 0.8% +1 digit

MSRP $49.95

(ea.) $37.95

-

Call For Pricing

MSRP $24.95

(ea.) $19.95 Call For Pricing

50MHz Logic Probe and Pulser Simplifies troubleshooting digital circuits by combining a logic probe and pulser in one probe. Specifications: •Operating voltage: 4VDC~18VDC •Maximum input signal frequency 50MHz •Input impedance: 120Kohm •TTL: Logic “1” 3.0V .25V, Logic “0” .75V 25V •CMOS: Logic “1” 60% VCC 5%, Logic “0” 15% VCC 5% •Minimum detectable pulse width 10nsec •Pulser: Sync input impedance 1Mohm •Pulse rate: Switchable .5pps or 400pps •Pulse width: 10sec •Dimensions: 83⁄16" (L) x 11 ⁄16" (dia) •90 day warranty MSRP $39.95

(1-9) $31.95

LIMITED 1 YEAR WARRANTY

LIMITED 1 YEAR WARRANTY

®

®

Capacitance Decade Box

Resistance Decade Box

Ideal for service, prototype and experimental use, this useful tool may be set at any non-polarized capacitor value from 100pF~11,111µF, in 100pF increments. 20 individual slide switches allow the user to quickly and easily select capacitance values. Wave soldered, two layer PC board utilizes high quality 5% tolerance mylar capacitors. Maximum internal residual capacitance is 50pF. Color coded binding posts provide capacitor and ground connections. Passive device requires no power source. Dimensions: 53⁄4" (H) x 41⁄2" (W) x 11⁄4" (D).

Ideal for service, prototype and experimental use, this useful tool may be set at any resistance value from 1~11,111,110ohm, in one ohm increments. 28 individual slide switches allow the user to quickly and easily select resistor values. Wave soldered, two layer PC board utilizes high quality 1% tolerance 1 ⁄3W resistors. Maximum stray internal resistance is 1⁄3ohm. Color coded binding posts provide resistor and ground connections. Passive device requires no power source. Dimensions: 53⁄4" (H) x 41⁄2" (W) x 11⁄4" (D).

Order # 72-7265

MSRP $99.95

(ea.) $73.95

www.mcmelectronics.com

Order # 72-7270 NET 30 Terms

MSRP $89.95

(ea.) $63.95

405

21

Single function meter is perfect for a wide variety of applications including supply voltage monitoring, educational and experimental purposes. Features: •Measures from 0.1mV~200.0VDC in four ranges •Large 18mm (0.7") four-digit LCD display •Color coded binding post inputs •Auto polarity •Meets CE and IEC 1010 CAT II, 600V standards •Dimensions: 53⁄4" (H) x 41⁄2" (W) x 11⁄4" (D) •Requires standard 9V battery (#292-035), not included.

±(4%+3) ±(0.5%+3)

®

Order # 72-500

Bench Top DC Volt Meter

Specifications Range 200mV 2V 20V 200V Input impedance

Description Feature Packed Pocket Multimeter With Calibration Certificate

Accuracy ±(0.8%+1) ±(1.2% +3) ±(1%+2)

C53_pg_406-407

section

21

8/14/08

12:58 PM

Page 406

Test Equipment

®

LCR Meter

Compact full featured meter provides inductance, capacitance and resistance (LCR) measurements. Quickly and accurately measure capacitance values up to 600µF in seven ranges, resistance to 20MΩ in six ranges and inductance to 20H in five ranges. Features: •31⁄2 digit 1999 count display •Transistor hFE measurement •Diode test •Audible continuity test •Low battery display •Comes complete with standard 9V battery, test clips and owners manual •See owners manual at www.mcmelectonics.com for detailed accuracy, resolution and test frequency specifications

✔1,999 count display ✔Seven capacitance ranges to 600µF ✔Six resistance ranges to 20MΩ ✔Five inductance ranges to 20H

Specifications Resistance Capacitance Inductance Dimensions

®

Benchtop LCR Meter

Order# 72-8155 72-8155C

This highly precise LCR meter provides 20,000 count accuracy, dual display and discrete force and sense BNC probe inputs, for accurate measurement and sorting of components. Features: •Dual display 20,000 and 1,000 count •Multiple test frequencies •Selectable tolerance modes for sorting •Measurement parameters: L, C, R, D, θ and Q •Auto/manual ranging •0.3% basic accuracy •Parallel/series test modes •Data logging capability •Optically isolated RS-232 interface •Short/open calibration •Complete 48 page theory and instruction manual supplied on disk, or available as free download from the MCM website

Range 200Ω, 2KΩ, 20KΩ, 200KΩ, 2MΩ, 20MΩ 2nF, 20nF, 200nF, 2µF, 20µF, 200µF, 600µF 2mH, 20mH, 200mH, 2H, 20H 6.77" (H) x 3.27" (W) x 1.50" (D) Description LCR Meter With Calibration Certificate

MSRP $69.95

Accuracy (0.8%+1) (1%+5)

(ea.) $52.95 Call For Pricing

®

Capacitance Meter ✔1,999 count display ✔Nine capacitance ranges to 20,000µF ✔Nine resistance ranges to 2,000MΩ ✔Transistor hFE measurement

Compact meter is ideal for capacitor measurement in service and assembly applications. Quickly and accurately measure capacitance values up to 20mF (20,000µF), in nine ranges, and resistance to 2,000MΩ in nine ranges. Features: •31⁄2 digit 1999 count display •Transistor hFE measurement •Diode test •Audible continuity test •Low battery display •Comes complete with standard 9V battery, test clips and owners manual •See owners manual at www.mcmelectronics.com for detailed accuracy, resolution and test frequency specifications

Specifications Range Resistance 20Ω~10MΩ

Resolution Accuracy 0.001Ω~0.001MΩ 100Hz/120Hz/1KHz: ±0.3% + 2 digits 10KHz: ±0.6% + 5 digits Capacitance 200pF~10mF 0.01pF~0.01mF 100Hz/120Hz/1KHz: ±0.4% + 3 digits 10KHz: ±1% + 5 digits Inductance 2000µH~1000H 0.1µH~0.1H 100Hz/120Hz/1KHz: ±0.3% + 5 digits 10KHz: ±0.6% + 8 digits Dissipation factor .000~999 auto Quality factor .000~999 auto ±90° θ Measurement Test frequencies 100Hz, 120Hz, 1KHz and 10KHz Tolerance mode 1%, 5%, 10% and 20% Dimensions 2.80" (H) x 10.25" (W) x 8.31" (D) Order # Description MSRP (ea.) 72-1025 Benchtop LCR Meter $399.00 $349.00 72-1025C With Calibration Certificate Call For Pricing 72-1026 RS-232 package 52.95 72-1027 SMD Tweezers 42.95

Specifications Resistance Capacitance Dimensions Order# 72-8150 72-8150C

Range 20Ω, 200Ω, 2KΩ, 20KΩ, 200KΩ, 2MΩ, 20MΩ, 200MΩ, 2,000MΩ 200pF, 2nF, 20nF, 200nF, 2µF, 20µF, 200µF, 2mF, 20mF 6.77" (H) x 3.27" (W) x 1.50" (D) Description Capacitance Meter With Calibration Certificate

MSRP $42.95

Accuracy (0.8%+1) (1%+2)

(ea.) $31.95 Call For Pricing

® ®

Analog Display VOM

21

Deluxe Analog Display VOM Perfect for educational purposes or in applications where unstable readings make digital displays inconvenient. Measures AC/DC voltage, DC current, resistance, temperature, decibels, continuity, identifies PNP and NPN transistors and tests batteries under a load. Features: •Large three-color mirrored scale •Carry handle that doubles as a stand •Continuity buzzer •Includes test leads and instruction manual •Requires one 9V and two “AA” batteries (included) Specifications DC voltage

Range 600mV, 3V, 12V, 60V, 300V 1000V AC voltage 12V, 30V, 120V, 600V, 1000V DC current 120µA, 3mA, 30mA, 300mA 10A Resistance X1Ω, x100Ω, x1KΩ, x10KΩ Battery test 1.5V @ 300mA, 9V @ 30mA Continuity Audible indication <100Ω Input impedance 20KΩ/V (DC), 9KΩ/V (AC) Dimensions 6.7" (H) x 4.9" (W) x 1.9" (D) Order# 72-8170

406

MSRP $39.95

Accuracy ±3% of full scale ±5% of full scale ±4% of full scale ±5% of full scale ±3% of full scale ±5% of full scale ±3% of arc

(ea.) $94.95

®

Analog Display VOM Perfect for educational purposes or in applications where unstable readings make digital displays inconvenient. This unit measures AC/DC voltage, DC current, resistance, decibels, and tests batteries under a load. Features: •Large threecolor mirrored scale •Included protective rubber holster •Attached test leads and instruction manual •Requires one “AA” battery (included) Specifications DC voltage AC voltage DC current Resistance Battery test Input impedance Dimensions Order# 72-8175

Range Accuracy 2.5V, 10V, 50V, 250V, 500V ±5% of full scale 10V, 50V, 500V ±5% of full scale 500µA, 10mA, 250mA ±5% of full scale x10Ω, x1KΩ ±5% of arc 1.5V @ 125mA, 9V @ 10mA 2KΩ/V 6.1" (H) x 3.5" (W) x 1.9" (D) MSRP $17.95

1-800-543-4330 Fax 1-800-765-6960

(ea.) $11.59

Perfect for educational purposes or in applications where unstable readings make digital displays inconvenient. This unit measures AC/DC voltage, DC current, resistance and decibels. Features: •Large three-color mirrored scale •Resistance measurement in five ranges for increased accuracy •Included protective rubber holster •Attached test leads and instruction manual •Requires one “AA” and one 9V battery (included) Specifications DC voltage AC voltage DC current Resistance

Range Accuracy 2.5V, 10V, 50V, 250V, 500V ±3% of full scale 50V, 250V, 500V ±4% of full scale 50µA, 5mA, 500mA ±3% of full scale x1Ω, x10Ω, x100Ω, ±3% of arc x1KΩ, x10KΩ Input impedance 2KΩ/V (DC) Input impedance 4KΩ/V (AC) Dimensions 6.1” (H) x 3.5” (W) x 1.9” (D) Order# 72-8180

MSRP $22.95

(ea.) $16.95

C53_pg_406-407

8/14/08

12:59 PM

Page 407

Test Equipment ®

Compact True RMS Clamp Meter ✔3,999 count display ✔True RMS measurement ✔AC/DC current measurement Perfect for general purpose applications. Features: •10MΩ input impedance •1" clamp diameter •Relative mode •Diode test •Continuity buzzer •Max hold •Data hold •Full icon display •Sleep mode •Low battery indicator •Includes zipper case, test leads, owners manual •Requires one 9V battery (#292-035), included Specifications DC voltage AC voltage DC current AC current Resistance Frequency Duty cycle TRMS AC voltage frequency TRMS AC current frequency Order # 72-7226 72-7226C

Range 400mV, 4V, 40V, 400V, 600V 4V, 40V, 400V, 600V 40A, 400A 40A, 400A 400Ω, 4KΩ, 40KΩ, 400KΩ, 4MΩ, 40MΩ 10Hz ~ 100MHz 0.1 ~ 99.9% 40Hz ~ 400Hz 50Hz ~ 60Hz

Description Compact True RMS Clamp Meter With Calibration Certificate

MSRP $119.00 -

Compact True RMS Clamp Meter ✔5,999 count display ✔True RMS measurement ✔AC/DC current measurement Perfect for applications where higher accuracy is critical. Features: •Backlit display •AC surge current measurement •10MΩ input impedance •Diode test •Continuity buzzer •Max hold •Data hold •Full icon display •Sleep mode •Low battery indicator •Includes zipper case, test leads, owners manual •Requires one 9V battery (#292-035), included

Accuracy ±(0.8% +1) ±(1% +5) ±(2% +3) ±(2.5% +5) ±(1% +2) ±(0.1% +3)

Specifications DC voltage AC voltage DC current AC current Resistance

(ea.) $84.95 Call For Pricing

Frequency Duty cycle Order # 72-7228 72-7228C

Compact Clamp Meter with Frequency ✔3,999 count display ✔AC/DC current measurement Perfect for general purpose applications. Features: •10MΩ input impedance •1" clamp diameter •Relative mode •Diode test •Continuity buzzer •Max hold •Data hold •Full icon display •Sleep mode •Low battery indicator •Includes zipper case, test leads, owners manual •Requires one 9V battery (#292-035), included

Frequency Duty cycle

Range 400mV, 4V, 40V, 400V, 600V 4V, 40V, 400V, 600V 40A, 400A 40A, 400A 400Ω, 4KΩ, 40KΩ, 400KΩ, 4MΩ, 40MΩ 10Hz ~ 100MHz 0.1 ~ 99.9%

21

®

®

Specifications DC voltage AC voltage DC current AC current Resistance

section

Range 6.6V, 66V, 600V 6.6V, 66V, 600V 66A, 1000A 66A, 1000A 660Ω, 6.6KΩ, 66KΩ, 660KΩ, 6.6MΩ, 66MΩ 660Hz~66MHz 0.1~99.9% Description MSRP Compact True RMS $149.00 Clamp Meter With Calibration Certificate

Accuracy ±(0.8% +1) ±(1.2% +5) ±(1.5% +8) ±(2% +8) ±(1% +2) ±(0.1% +3) (ea.) $105.00 Call For Pricing

®

Compact Clamp Meter with Temperature ✔1,999 count display ✔AC current measurement Perfect for general purpose applications including HVAC and appliance repair, this compact clamp meter measures AC/DC voltage, AC current, resistance and temperature. Features: •1999 count autoranging display •10MΩ input impedance •Diode test •Continuity buzzer •Max hold •Data hold •Full icon display •Sleep mode •Low battery indicator •Includes zipper case, test leads, owners manual •Requires two “AAA” batteries (#292-025), included Specifications Range Accuracy DC voltage 200mV, 2V, 20V, 200V, 600V ±(0.8% +1) AC voltage 2V, 20V, 200V, 600V ±(1.2% +5) AC current 2A, 20A, 200A, 400A ±(1.5% +5) Resistance 200Ω, 2KΩ, 20KΩ, 200KΩ, 2MΩ, 20MΩ ±(1% +2) Temperature (°C) -40° ~ +1000°C ±(1% +3) Temperature (°F) -40° ~ +1832°F ±(1% +6)

Accuracy ±(0.8% +1) ±(1% +5) ±(2% +3) ±(2.5% +5) ±(1% +2) ±(0.1% +3)

Order # 72-7224

Description MSRP (ea.) Compact Clamp $89.00 $63.95 Meter with Frequency 72-7224C With Calibration Certificate Call For Pricing

Order # Description MSRP (ea.) 72-7222 Compact Clamp Meter w/Temperature $59.00 $37.95 72-7222C With Calibration Certificate - Call For Pricing ®

Computer ATX Power Supply Tester

®

Lighted Test Lead

Order # 72-7775

(1–3) $7.95

(4–up) $6.95

Obtain quick verification of proper operation of ATX style computer power supplies. Simply connect the Tenma computer power supply tester to the ATX supply’s 20 pin connector, and slide the testers rocker switch to the ON position. The tester applies the proper current load and simulates the ON command from the motherboard, and provides LED verification of proper operation. Further verification can be obtained by measuring the pin voltage using a standard DMM (not included). Features: •Compact size, only 3⁄4" (H) x 13⁄8" (W) x 33⁄4" (L) •Rugged metal housing •6" lead between connector and tester housing •Convenient test points for +3.3V, +12.0V, – 5.0V and + 5.0V measurement •On/off rocker switch with LED •Complete instructions included Order # 72-1082

MSRP $19.95

(1–3) $13.69

(4–up) $12.39

Deluxe Computer Power Supply Tester The Tenma ATX Power Supply Tester is designed to provide fast convenient verification of proper operation of both 20 pin and 24 pin ATX style computer power supplies. Features: •Provides simulated motherboard “ON” condition, with load •LED indication of power supply operation •Voltage measurement of all 14 pins on the main motherboard connector •Measurement of all applicable pins on the peripheral, floppy, Serial ATA and P4 processor connectors •Bi-directional analog meter shows negative and positive measurement •Rugged steel housing with non-skid rubber feet •Compact size, only 11⁄2" (H) x 9" (W) x 4" (D) •Calibrated -15~0~15VDC analog meter •On/off rocker switch with LED indicator •Detailed instructions included Order # 72-1086

www.mcmelectronics.com

MSRP $49.95 NET 30 Terms

(ea.) $41.50

407

21

Ideal when inadequate lighting creates a difficult or unsafe service environment. High brightness red LED lights the immediate test probe area, and is controlled by a momentary pushbutton switch. Red test lead is sold individually, and is intended for use with devices existing black (–) lead. Features: •36" PVC jacketed lead •Fully insulated IEC1010 4mm banana plug •Compatible with all Tenma DMM models #72-7720~72-7770, and most others •Meets 1000V Cat II requirements •10A rating •Includes two LR41 type batteries

®

C53_pg_408-409

section

21

8/14/08

1:00 PM

Page 408

Test Equipment ®

LIMITED 1 YEAR WARRANTY

Digital Speaker Impedance Meter

®

Active device is essential for reliable installation of background music and paging systems in residences, offices buildings and public areas. Avoid costly service calls and amplifier damage by verifying actual speaker system impedance prior to operation. Unlike conventional volt/ohm meters, which measure DC resistance, this unit utilizes an internal 1KHz oscillator to measure true impedance. Accurately measure speaker lines that utilize impedance matching volume controls, switchers, transformers and passive crossovers. Because this unit accurately measures up to 2Kohm, it may also be utilized with 25V, 50V, 70V, and 100V speaker line transformers in commercial installations (information included in the manual). Large digital display features 1" characters for easy viewing. Rotary selector provides x1 (0~20Ω), x10 (0~200Ω) and x100 (0~2KΩ) scales. Rugged, double insulated case is CATIII rated for use up to 100V. Dimensions: 8" (H) x 31⁄2" (W) x 21⁄4" (D). Includes test leads, carry case and owners manual. Requires six “AA” batteries (#292-015), not included.

LIMITED 1 YEAR WARRANTY

Digital Sound Level Meter Features: •A and C weighting •35~130dB measurement •2 ranges •Meets IEC 651 type 2 standards •RS-232 data interface •31⁄2 digit LCD display •1⁄2" condenser microphone •Fast and slow dynamic response •Over and under range indicator •Maximum level hold •Internal oscillator for calibration •AC and DC signal output •Includes owners manual, 9V battery, carrying case, wind screen and adjustment screwdriver Specifications Range Resolution Frequency range Accuracy AC output DC output Dimensions/weight Order # 72-860A 72-860AC

35~90dB (low), 75~130dB (high) 0.1dB 30Hz~8KHz ±2.0dB at 1KHz (94dB level) 0.65V RMS corresponding to each range step 10mV/dB nominal 25⁄8" (W) x 91⁄2" (L) x 1" (H)/8 oz.

Description MSRP (ea.) Digital Sound Level Meter $159.00 $121.00 With Calibration Certificate Call For Pricing

®

Digital Sound Level Meter Features: •A weighting •35~130dB measurement •3 ranges •Meets IEC 651 type 2 standards •31⁄2 digit LCD display •Fast (200msec.) response •Over and under range indicator •Data hold •Includes owners manual •Requires 9V battery not included (#292-035) Specifications: Range Resolution Accuracy (at 23° ±5°C) Dimensions/weight Order # 72-6635 72-6635C

35~80dB/50~100dB/80~130dB 0.1dB ±1.5dB at 1KHz (94dB level) 27⁄8" (W) x 9" (L) x 11⁄8" (H)/8.8 oz.

Description Digital Sound Level Meter With Calibration Certificate

MSRP $179.00

(ea.) $131.00

-

Call For Pricing

®

Sound Level Meter Calibrator

Order # 72-6947

Description MSRP (ea.) Digital Speaker $299.00 $209.00 Impedance Meter 72-6947C With Calibration - Call For Pricing Certificate Specifications Frequency SPL THD Dimensions

1000Hz ±5% 94dB ±0.8dB <2.0% 2" (dia.) x 3.2" (L)

Specifically intended for Tenma #72-6635 and #72-860 Sound Level Meters, this precision calibrator is compatible with any instrument with a 1⁄2" diameter mic element housing. Essential for maintaining the accuracy of any portable sound level meter, this unit generates a precise 1KHz tone, at exactly 94dB. Single slide switch provides on/off/battery test functions. Housed in a rugged, die–cast aluminum alloy housing. Requires two 9V alkaline batteries (#292-015), not included. Includes carry case and owners manual. Order # 72-7260

MSRP $329.00

(ea.) $249.00

®

21

®

Speaker Measurement Interface

Semiconductor Tester

The Tenma SMI is essential for design, refurbishing or DIY speaker building. This compact interface is powered directly from the USB port of most PCs, including laptops, and provide full T/S parameters of the connected speaker. Simply connect to an unmounted driver, and in a few minutes, this device will provide Fs, Cms, Qts, Vas, BL, Re, Le, Mms and CMS measurements, as well as an impedance curve and more. Measurements can be performed in most any shop or home, no special microphones or testing area is required. Features: •Real time continuous phase and impedance meter •True current source drive (not an approximation) •Continuously adjustable 1Hz~20KHz line output •Measure resistors, inductors, capacitors, test leads, cables and more •Interface dimensions: 21⁄2" (H) x 21⁄2" (W) x 1" (D) Order # 72-850

408

MSRP $189.00

(ea.) $159.00

This low cost portable semiconductor tester provides in or out of circuit testing on transistors, FETs, SCRs and diodes. Features: •Auto base or gate identifier •Tests: Transistors, FETs, SCRs and diodes •Identifies: NPN/PNP transistor, N-channel/P-channel FETs, silicon/germanium diodes •Continuity test: Audio tone General: •Power requirements: AC adaptor supplied; 9V battery not included (#292-035) •Dimensions: 33⁄4" (W) x 13⁄8" (H) x 63⁄4" (D) •Weight: 1 lb. •Replacement AC adaptor available (#28-2790) Specifications Test cycle Maximum load Audio tone Dimensions Weight

Four quadrants 15Ω Indicates less than 20Ω 33⁄4" (W) x 13⁄8" (H) x 63⁄4" (D) 1 lb.

1-800-543-4330 Fax 1-800-765-6960

Order # 72-965 28-2790

Description Semiconductor Tester Replacement AC adaptor

MSRP $149.00 -

(ea.) $101.00 4.99

C53_pg_408-409

8/14/08

1:00 PM

Page 409

Test Equipment

®

Dual Input Digital Thermometer with USB Interface ✔Accepts type K, J, T, and E thermocouples ✔Data logging up to 100 records Compact hand held thermometer is ideal for a variety of industrial, residential, HVAC and equipment testing applications. It accepts industry standard Type K, J, T and E thermocouple probes and features internal data logging of up to 100 records. Dual inputs allow simultaneous measurement of two separate zones with independent readout of differential (T1-T2) display Features: •°C/°F/K measurement •Backlit four digit display •Data hold •MAX/MIN/DIF/AVG display •Sleep mode •Includes one K type bead probe, USB cable software •Requires one 9V battery (#292-035), included ®

Dual Input Digital Thermometer with USB Interface ✔Accepts type K, J, T, E, R, S and N thermocouples ✔User definable high/low alarms ✔User self calibration ✔Data logging up to 100 records Compact hand held thermometer is ideal for a variety of industrial, residential, HVAC and equipment testing applications. It accepts industry standard thermocouple probes and features internal data logging of up to 100 records. Dual inputs allow simultaneous measurement of two separate zones with independent readout of differential (T1-T2) display Features: •User definable HI/LO alarms •User self calibration •°C/°F/K measurement •Backlit four digit display •Data hold •MAX/MIN/DIF/AVG display •Sleep mode •Includes one K type bead probe, USB cable software •Requires one 9V battery (#292-035), included

Specifications Thermocouple Input Range K Type -200°C ~ 1372°C -200°F ~ 1372°F J Type -210°C ~ 1200°C -346°F ~ 2192°F T Type -210°C ~ 1200°C -346°F ~ 2192°F E Type -150°C ~ 1000°C -238°F ~ 1832°F Resolution ≤999.9° 0.1° ≥1000° 1° Accuracy 0.5% ±0.8°C Dimensions 6.9" (H) x 3.3" (W) x 1.2" (D) Order # Description MSRP (ea.) 72-7712 Dual Input Digital $139.00 $85.00 Thermometer with USB Interface 72-7712C With Calibration Call For Certificate Pricing

section

21

®

Non-Contact Infrared Thermometers #72-820 ✔12:1 distance to spot ratio ✔Measures 0°F~1000°F / -18°C~550°C ✔Adjustable emissivity #72-823 ✔20:1 distance to spot ratio ✔Measures -25°F~1200°F /-32°C~650°C ✔Adjustable emissivity Simply point the unit and squeeze the trigger to provide fast, accurate surface temperature measurement. Attached laser pointer provides immediate verification of aim Features: •°C/°F measurement •Backlit four digit display •Temperature data hold •MAX/MIN/DIF/AVG temperature display •Tripod mount •Sleep mode Specifications: •Display resolution: 0.1 •Display accuracy: ±1.8° or ±2% •Repeatability: ±0.5° or ±0.5% •Response time: 250mS •Spectral response: 8µm~14µm •Display hold: 8 seconds •Emissivity: Digitally adjustable from 0.10~1.0 by 0.01 •Requires one 9V battery (#292-035), included

Specifications Thermocouple Input Temperature Range Accuracy K Type -200°C ~ 1372°C 0.2% ±0.6°C -200°F ~ 1372°F J Type -210°C ~ 1200°C 0.2% ±0.6°C -346°F ~ 2192°F T Type -210°C ~ 1200°C 0.2% ±0.6°C -346°F ~ 2192°F E Type -150°C ~ 1000°C 0.2% ±0.6°C -238°F ~ 1832°F R Type 0.0°C ~ 1767°C 0.2% ±2°C 32°F ~ 3212°F S Type 0.0°C ~ 1767°C 0.2% ±2°C 32°F ~ 3212°F N Type -200°C ~ 1300°C 0.2% ±1.5°C -328°F ~ 2372°F Resolution ≤999.9° 0.1° ≥1000° 1° Dimensions 6.9" (H) x 3.3" (W) x 1.2" (D) Order # Description MSRP (ea.) 72-7715 Dual Input Digital $149.00 $99.95 Thermometer with USB Interface 72-7715C With Calibration Call For Certificate Pricing

Model 72-820 72-823 Range (°F) 0°~1000° -25°~1200° Range (°C) -18°~550° -32°~650° Distance/spot ratio 12:1 20:1 Order # Description MSRP (ea.) 72-820 Non-Contact $149.00 $73.95 Infrared Thermometer 72-820C With Calibration Certificate Call For Pricing 72-823 Non-Contact 99.95 Infrared Thermometer 72-823C With Calibration Certificate Call For Pricing

®

Temperature Probes and Accessories Type K thermocouple temperature probes are commonly used with all types of industrial temperature controls and measurement equipment, and are compatible with Tenma hand held thermometers and digital multimeters that include temperature function. All are terminated with standard type K plugs. #72-8368 transition adaptor converts any type K thermocouple to multimeters banana inputs. #72-8370 type K extension cable provides 3m additional length, multiple extensions may be added together. See chart below for temperature range, complete details on the MCM website. Fig. A B C D E F

Order # 72-8360 72-8362 72-8364 72-8366 72-8368 72-8370

Type Overall Dimensions Air/gas 12.5" (L) x 3⁄8" (dia) Immersion 8.5" (L) x 1⁄8" (dia) Surface 5.75" (L) x 1⁄2" (dia) Bead type 1m lead wire Transition plug 3m extension

Max Temperature MSRP (1-3) (4-up) 1112°F / 600°C $99.95 $49.95 $47.95 1112°F / 600°C 49.95 24.95 23.95 752°F / 400°C 79.95 34.95 33.49 392°F / 200°C 12.95 6.99 6.69 10.95 5.99 5.75 39.95 18.95 18.19

B

A

D

®

Insulation Tester

Accuracy ±(3% + 1 digit) ±(3% + 1 digit) ±(1% + 1 digit) (ea.) $149.00

21

Features: •Easy to read 1999 count digital display •Wide measuring range •Built-in over range and low battery indication •Overload protection on all ranges •Sensitive 0~200ohm range for measuring low resistance circuits •Automatic zero adjust and circuit discharge •Includes owners manual and alligator clips •Requires eight 1.5V “AA” batteries (#292-015) not included Resolution 0.1MΩ 1MΩ 0.1Ω MSRP $199.00

F

E

®

Specifications Range 200MΩ (500V) 1000MΩ (1000V) 200Ω Order # 72-6782

C

GFCI/Polarity AC Socket Tester Simple, easy-to-use tester provides instant verification of correct wiring and provides GFCI trip rating test of standard 110VAC outlets. Three LEDs instantly illustrate the following: •Correct wiring •Hot/neutral reverse •Hot/ground reverse •Missing neutral •Missing ground •Missing hot. Rotary selector switch tests GFCI trip current of 10, 15, 20, 25, 30 and 35mA. Attached 12" cord is terminated with a 15A molded plug. Housing dimensions: 31⁄4" (H) x 21⁄4" (W) x 13⁄8" (D). Order # 72-6791

www.mcmelectronics.com

MSRP $19.95 NET 30 Terms

(ea.) $14.95

409

C53_pg_410-411

section

21

8/14/08

1:01 PM

Page 410

Test Equipment ®

Television/CATV Signal Level Meter Fully portable, compact signal level meter is essential when installing CATV or off–air antenna systems. Easily verify proper signal level of any channel, at each drop throughout a structure. FM demodulator and internal speaker provide audio output of measured channel. Compact ergonomic unit is less than 9" tall, and is easily held in one hand. Features: •Direct channel input of off–air channels 2~69 and CATV channels 2~136 •Direct frequency input from 5~870MHz •Simultaneously displays video carrier and audio carrier strength •Selectable dBmV and dBµV units •Spectrum scan and channel scan modes •Tilt measurement of seven user definable channels •Carrier/noise ratio measurement •Trunk voltage measurement •Self recalibration •Large 11⁄2" x 21⁄4" dot matrix LCD display •Data logging •RS-232C port with serial print function •Internal NiMH battery with included wall charger •Includes carry case, carry strap and manual •Battery life: 5~8 hours

®

HDTV Multi Media Pattern Generator The Tenma #72-7985A video test pattern generator is the ideal low cost solution for installation, calibration and servicing of virtually all of today’s high–resolution display devices. Compact unit provides DVI, PC (VGA through SXGA), and HDTV Component Video (Y/Pb/Pr) outputs, and with the addition of a separately available adaptor cable, it is also compatible with monitors utilizing HDMI inputs. This unit features 28 static and dynamic video test patterns specially designed for testing, calibrating, and troubleshooting high–end video gear and A/V installations. In addition standard PC resolutions and refresh rates (up to SXGA at 85Hz), it is capable of providing HDTV outputs from 480p to 1080i both in DVI digital and in Y/Pb/Pr formats. On screen display indicates output resolution and refresh rate settings. Simple three–button operation easily selects scan/refresh rate and pattern. Features: •PC output resolutions from 640 x 480 to 1280 x 1024 (VGA, SVGA, XGA, SXGA) •HDTV output resolutions from 480p to 1080p (480i, 576i, 480p, 567p, 720p, 1080p) •Simple, intuitive push–button on screen menu control •Highly portable EMI shielded enclosure •Included cables for connection to DVI, VGA, and component video monitors •Complete manual and sample test patterns are available on www.mcmelectronics.com Order # Description (ea.) 72-7985A Pattern generator $650.00 24-9645 6' DVI to HDMI cable 42.95 24-9650 10' DVI to HDMI cable 49.95

Order # Description MSRP (ea.) 72-805 Television/CATV Signal Level Meter $750.00 $613.00 72-805C With Calibrated Certificate Call For Pricing

LIMITED 1 YEAR WARRANTY ®

1.3GHz Hand Held Frequency Counter Features: •Large eight digit LCD display with annunciators •5Hz~1.3GHz frequency range •High sensitivity •Reciprocal counting technique for superior accuracy •Measures frequency and period •Selectable gate time (0.1sec, 1sec, 10sec) •Hold function •Selectable low pass filter •Push-to-measure function with auto power-down •Requires one 9V battery not included (#292-035) Specifications Channel A: Range Sensitivity Resolution Channel B: Range Sensitivity Resolution Input impedance Period frequency range Time base/max aging rate Dimensions/weight

Description 1.3GHz Frequency Counter With Calibrated Certificate

MSRP $249.00 -

(ea.) $215.00 Call For Pricing

21

Order # 72-6605 72-6605C

5Hz~25MHz 15mV RMS (10Hz~20MHz) 10-7Hz~10Hz 20MHz~1.3GHz 10mV RMS (20MHz~700MHz), 50mV RMS (700MHz~1.3GHz) 1Hz~1KHz CH-A: 1MΩ, CH-B: 50Ω 5Hz~25MHz 10MHz crystal/±5ppm/yr 3.2" (W) x 7" (L) x 1.2" (D)/7 oz.

LIMITED 1 YEAR WARRANTY ®

Test and Measurement DVD Set Feature–packed two–disk set includes everything needed for audio video set-up of standard and high definition home theater systems. Allows easy setting of audio levels, picture alignment, brightness and color levels. Features: •500 test patterns for 4:3 and 16:9 formats •700 test tones in several sound formats including 96KHz/24 bit •48KHz/24 bit •Dolby Digital •DTS •Sample sound effects in multiple audio formats •High definition video presentation loop •Film trailer in various multi channel formats •42 page instruction manual encompasses virtually every aspect of DVD technology •Custom manufactured in Germany by Burosch Audio–Video–Technik, for exclusive distribution in North America by Tenma Test Equipment. Some audio portions of this DVD are in spoken German, overdubbed in English. For NTSC format players only. Order # 72-7509

MSRP $69.95

(ea.) $47.95

®

RF Generator

Specifications Frequency range

Features: •High stability •Wide frequency range: 100KHz~450MHz •Built-in 1KHz oscillator •External crystal input •Power requirements: 110V, 220VAC, 50/60Hz Order # MSRP (1-9) (10-up) RF Generator 72-585 $279.00 $163.00 $151.00 With Calibration Certificate 72-585C Call For Pricing

Frequency accuracy RF output Modulation Dimensions/weight

410

1-800-543-4330 Fax 1-800-765-6960

(A): 100KHz~300KHz (B): 300KHz~1000KHz (C): 1MHz~3.2MHz (D): 3.0MHz~10MHz (E): 10MHz~30MHz (F): 32MHz~150MHz (up to 450MHz on third-harmonics) ±3% 100mV RMS, approximately (up to 35MHz) Internal: 1KHz External: 50Hz~20KHz, at less than 1V RMS 10" (W) x 6" (H) x 51⁄4" (D)/7 lbs.

C53_pg_410-411

8/14/08

®

1:02 PM

Page 411

LIMITED 1 YEAR WARRANTY

Tone Test Kit

Test Equipment

The Tenma tone test kit is built of high impact plastic to withstand most troubleshooting applications. It is ideal to help identify the termination point of wires or to trace their paths. The tone generator includes polarity, continuity and 1KHz warble or solid tone emission. In addition, a hanging strap has been added to avoid undue strain on leads supporting the unit. The inductive amplifier offers features such as wrist wrap, low battery light and buttset connections with weather cover. Also, it is crushproof up to 4000 lbs. “Try this with another probe.” Kit contains: •Tone generator, inductive amplifier and carrying case Order # 72-6068

MSRP $149.00

section

21

(kit) $105.07

Available separately

Order # 72-6065 72-6067

Description Tone generator Carrying case

(ea.) $29.75 15.95 LIMITED 1 YEAR WARRANTY

®

Test Telephone

®

Designed for installation professionals who require hard wired communications at remote locations or line testing. Can be used for two-way communications and provides all test functions normally required for standard lines. Meets or exceeds BS6301, BS6305, BS6317, BS2011, BS6527 for Class B radiated RF emissions, S1710 for conducted and radiated RF susceptibility and IEC801-2 for electrostatic discharge. Features: •DTMF/pulse dailing •Ten digits (6x3 format) with -, #, mem store, mem recall and mute •Polarity LED test •Talk/monitor switch •High impedance monitor mode •Ten number speed dial memory •Flash (DIS) button •Audible ring indication •Mute button •Redial button Specifications: Monitor impedance Pulse dialing DTMF dialing

HDMI Cable Tester Quickly troubleshoot and verify HDTV installations with this compact device. This tester provides DC continuity test on all active HDMI pins by sequentially testing each data path. The tester features two HDMI connections, allowing easy testing of preassembled connections, plus includes a remote module for easy testing from remote areas. LED indicators provide independent test of each of the following nine signal paths: •TDMS red •TDMS green •TDMS blue •TDMS clock •CEC •SCL clock •SDA data •+5V •Hot plug detect. Test paths are sequentially tested automatically, or may be manually selected. LED indication is provided on the main test unit, as well as the remote module. All connections are HDMI female type. Requires standard 9V battery (#292-035), not included.

>50KΩ 10pps, break/make ratio 2:1, IDP=800ms Tone on: 100ms minimum, level: (both tones) -11~9dBm, pre-emphasis on high tone: +2dBm ±1dBm 31⁄2" (W) x 31⁄4" (H) x 11" (D)/1 lb.

Dimensions/weight Order # 72-6069A

MSRP $229.00

(ea.) $179.00

Order # 72-847

MSRP $99.95

(ea.) $63.95

®

Non Contact AC Voltage Detector

®

Auto ranging pocket tester provides audio and visual verification of the presence of high voltages. Simply hold the non-conductive plastic tip near AC outlets, wiring, power cords, or circuit breakers, and the unit will provide instant verification of the presence of voltage. Features: •Beeper and flashing LED indicators •Silent mode •30 minute auto power-off Specifications: •Voltage range: 90~1000VAC •Frequency range: 50~60Hz •Power requirements: two “AAA” batteries •Overall length: 6" Order # 72-750

MSRP $19.95

(1-3) $12.95

(4-up) $10.50

Compact Continuity Tester

Useful tool helps identify wiring problems in home, automotive and other electrical wiring. Simple device incorporates a small 1.5V lamp and “AAA” battery, (#292-025, not included) test wiring, connectors, switches, relays and other contacts. 2' wire lead is terminated with a fully–insulated alligator clip, and test probe includes a sharp, insulation piercing point, for convenience. Note: Not for use on live circuits. Order # 72-7280

(1–3) $1.99

(4–9) $1.59

(10–up) $1.49

®

LIMITED 1 YEAR WARRANTY

Multi-Network and Modular Cable Tester

Metal/Power/Stud Sensor

Features: •Electronically locates hidden cable, gas, and water pipes •Traces hidden ceiling joists and wall studs •Helps to prevent accidents when drilling or sawing •Audible and visual indication of voltage Order # 72-6792

(ea.) $22.00

Universal Voltage Tester

A simple low cost voltage tester designed to detect voltages between 6~400VAC/DC. Features: •Integral finger guard for added safety •LED visual indication •Polarity display •Indicated voltages: ±6V with polarity display •GS/TUV/CE safety approved Order # 72-6793

(ea.) $15.00

www.mcmelectronics.com

Order # 72-6706

NET 30 Terms

MSRP $109.00

(ea.) $89.95

411

21

® ®

The Tenma Multi-Network and Modular Cable Tester easily reads the correct pin configuration of 10Base-T cable (Cat 5), 10Base-2 cable (coax), RJ-45/RJ-11 modular cables, 356A, TIA-568A/568B and Token Ring cable by comparing transmitting end to the corresponding receiving end. Features: •Easy verification of cable continuity, open, short and miswiring •Remote terminator tests installed cables up to 1000' away •Grounding test •Auto or manual scanning of pin-outs •Includes two BNC adaptor cables, BNC male/male adaptor, RJ-45 modular cable, carrying case and owners manual •Requires 9V battery not included (#292-035)

C53_pg_412-413

section

21

8/14/08

1:03 PM

Page 412

Test Equipment

LIMITED 1 YEAR WARRANTY

®

15MHz Sweep Function Generator with Counter Features: •Provides 0.01Hz~15KHz output in seven steps •Built-in 50MHz frequency counter with five digit display •Sine, triangle, square, DC and sync output •Frequency, symmetry, linear sweep, DC offset and amplitude function •AM, FM, and EXT. modulation •10MHz crystal time base with ±10PPM accuracy •Output attenuator: 20dB/40dB/60dB •Linear sweep mode •Power requirements: 100/120/220/240VAC, 50/60Hz •Includes owners manual and detachable IEC type power cord

®

Audio Generator Features: •Low distortion 10Hz~1MHz audio generator in five range steps •Sine and square wave output •Variable amplitude •Output attenuator (-10dB, -20dB, -30dB, -40dB, -50dB) •600ohm output impedance •External sync input •Power requirements: 100V, 120V, 220V, 240VAC, 50/60Hz •Includes owners manual, test leads and power cord Specifications Generator frequency Sine wave output Distortion

Order# 72-7650 72-7650C

10Hz~1MHz, ±0.5dB (600Ω load) 7V RMS (no load) ≤0.1% (400Hz~20KHz) x100 range ≤0.3% (100Hz~100KHz) x10 range 10V p-p (no load) ≤200nsec <2% 51⁄2" (W) x 73⁄4" (H) x 10" (D)/7.7 lbs.

Square wave output Rise/fall time Overshoot Dimensions/weight Order # 72-455A 72-455AC

Specifications Generator frequency Output amplitude Sweep rate Sweep ratio Variable DC offset Selectable attenuation Dimensions/weight

Description Audio Generator With Calibration Certificate

MSRP $299.00 -

0.01Hz~15MHz in seven range steps Adjustable, 10V p-p, @50Ω 5mS~5.0S 1:1 ~ 1:100 ±10V, open circuit 20dB/40dB/60dB 2.8" (H) x 10.3" (W) x 8.3" (D)/6.6 lbs.

Description 15MHz Sweep Function Generator with Counter With Calibration Certificate

MSRP $599.00 -

(ea.) $514.00 Call For Pricing

(ea.) $205.00 Call For Pricing ®

5MHz Sweep Function Generator with Counter Features: •Provides 0.01Hz~5MHz output in eight steps •Built-in 50MHz frequency counter with four digit display •Sine, triangle, square, DC and sync output •Frequency, symmetry, linear sweep, DC offset and amplitude function •10MHz crystal time base with ±10PPM accuracy •Output attenuator: 20dB •Linear sweep mode •Power requirements: 100/120/220/240VAC, 50/60Hz •Includes owners manual and detachable IEC type power cord Specifications Generator frequency Output amplitude Sweep rate Sweep ratio Variable DC offset Dimensions/weight Order # 72-7210 72-7210C

0.01Hz~5MHz in eight range steps Adjustable, 10V p-p, @50Ω 10mS~5.0S 1:1 ~ 1:100 ±10V, open circuit 2.8" (H) x 10.3" (W) x 8.3" (D)/3.5 lbs.

Description 5MHz Sweep Function Generator with Counter With Calibration Certificate

MSRP $349.00 -

(ea.) $305.00 Call For Pricing

®

20MHz Function Generator

®

21

Features: •20MHz dial set •0.2Hz~20MHz frequency range •Sine, square, and triangle waveforms plus DC •10mV~20V p–p from 50W •DC offset control •Variable symmetry control •External sweep input Specifications Frequency range Maximum O/C level Input impedance Output impedance Sweep range Maximum input voltage Power requirements Dimensions Weight

0.2Hz~20MHz 20V p–p 82KΩ 50Ω >20:1 ±10V 120VAC, 60Hz 3.2 x 8.6 x 9.0 3.3 lbs.

Order # Description MSRP (ea.) 72-6859 20MHz Function Generator $449.00 $371.00 72-6859C With Calibration Certificate - Call For Pricing

412

10MHz Pulse Generator

Features: •0.1Hz~10MHz frequency range •Independent control of pulse delay •50ns minimum pulse width •Square wave, double pulse, and delayed pulse •Free–run, gated, and triggered modes •TTL/CMOS and sync outputs •Two switch setting for outputs: 0.1~1.0V and 1.0~10V with a rise/fall time of 10ns into 50ohm •Load: 15ns maximum

1-800-543-4330 Fax 1-800-765-6960

Specifications Period Pulse width Delay Frequency range Signal range Minimum pulse width Input impedance Dimensions Weight

100ns~10ns (10MHz~.01Hz) 50ns~5s 50ns~5s DC to MHz TTL Threshold .30ns 10KΩ 5.5" (H) x 8.6"(W) x 9.0"(D) 3.5 lbs.

Order # Description 72-6860 10MHz Pulse Generator 72-6860C With Calibration Certificate

MSRP (ea.) $399.00 $314.00 Call For Pricing

C53_pg_412-413

8/14/08

1:03 PM

Page 413

Test Equipment LIMITED 1 YEAR WARRANTY

Compact Test/Tone Generator

Hand Held Audio Generator Features: •Wide frequency range •Sine and square wave output •Sync output •Variable amplitude •Output attenuator (-20dB) •600ohm output impedance •Low battery indicator •Includes owners manual, 9V battery and test leads

Square wave output Rise/fall time Overshoot Dimensions

21

®

®

Specifications Generator frequency Sine wave output Distortion

section

20Hz~150KHz in 46 steps, ±0.5dB 1.2V RMS (no load) ≤0.05% (200Hz~15KHz) ≤0.1% (50Hz~30KHz) ≤0.3% (20Hz~100KHz) 8V p-p max. (no load) ≤0.5µsec <2% 33⁄8" (W) x 6" (H) x 1" (D)

Order # Description MSRP (ea.) 72-505 Hand Held Audio Generator $79.95 $58.95 72-505C With Calibration Certificate - Call For Pricing

Compact tone generator is great for general test and troubleshooting of virtually any audio installation including automotive, residential and distributed commercial systems. Line level audio output is high enough to drive home theater, autosound and prosound inputs, and speaker level output delivers over 1W signal. Dual frequencies enhance use with all types of speaker systems. Features: •6" heavy-duty 18AWG speaker leads with insulated alligator clips •6" pigtail with female RCA L/R line output connections •Portable 9V battery operation •LED power indicator Specifications: •Line output: 500mV •Speaker output: 3V •Test frequencies: 200Hz/1KHz, sine wave •Power requirements: 9V battery (#292-035), not included •Dimensions: 4.13" (H) x 2.31" (W) x 1" (D) Order # 72-815

MSRP $39.95

(1-9) $31.95

®

Back

Compact Audio Generator Highly versatile audio generator is perfect for sound system and speaker component testing. Its high precision and remote VCO input make it suitable for the serious test environment, yet its compact size and low cost make it suitable for any tool box. Features: •Rotary frequency adjustment •Independent sine and square wave outputs, each with their own level control •VCO input for remote frequency setting •1⁄4" unbalanced outputs •Selectable 0dB/10dB output attenuator Specifications: •Frequency range: 20Hz~20KHz ±1dB •VCO input: 1.2~5.0VDC for full frequency output •Output level: +11dB (sine), +14dB (square) •Output impedance: 100ohm •THD (sine wave): 1% •Power requirements: 12~16VDC, 50mA, AC adaptor included •Dimensions: 1.57" (H) x 4.49" (W) x 2.87" (D) Order # 72-490

#72-6850

MSRP $79.95

(ea.) $59.95

#72-6851

®

Standard and Programmable Power Supplies Features: •CV and CI operation with automatic crossover •High resolution setting •Low noise •Excellent transient response •Remote sense terminals •Programmable models feature nonvolatile storage of 25 settings, watts display, GPIB, RS–232 port, and keypad •Standard models have rotary controls Output Output Order # Description Voltage Current MSRP (ea.) Specifications 72-6850 Standard 0~35VDC 0~10A $999.00 $761.00 Ripple and noise ≤1mV RMS 72-6850C With Calibration Certificate Call For Pricing Load regulation <0.01% for a 90% load change 72-6851 Programmable 0~35VDC 0~10A 1500.00 1360.00 Line regulation <0.01% for a 10% line voltage change 72-6851C With Calibration Certificate Call For Pricing Power requirements 120VAC, 60Hz 72-6852 Standard 0~18VDC 0~20A 1050.00 798.00 Dimensions 5.2" (H) x 8.3" (W) x 13.8" (D) 72-6852C With Calibration Certificate Call For Pricing 72-6853 Programmable 0~18VDC 0~20A 1250.00 1066.00 72-6853C With Calibration Certificate Call For Pricing ®

Specifications Ripple and noise Load regulation Line regulation Power requirements Dimensions

≤2mV RMS <0.01% for a 90% load change <0.01% for a 10% line voltage change 120VAC, 60Hz 5.2" (H) x 8.3" (W) x 13.8" (D)

Order # Description 72-6854 Dual Output Power Supply 72-6854C With Calibration Certificate

MSRP (ea.) $1100.00 $863.00 Call For Pricing

www.mcmelectronics.com

Quad Output 3 Amp Power Supply

LIMITED 1 YEAR WARRANTY

Features: •Quad independent DC output •Four LED display with 3 digits, selectable for two sets output voltage and current display simultaneously •Auto series, parallel, and tracking operation •Low ripple and noise •Overload and reverse polarity protection •Selectable for continuous/dynamic load •Output enable/disable control •Power requirements:100V, 120V, 220V, 240V, 50/60Hz •Includes test leads, power cord and owners manual Voltage Current

CH1 O~30V 0~3A

Line regulation Load regulation Ripple & noise

CH2 O~30V 0~3A CH1/CH2 ≤0.01%+3mV ≤0.01%+3mV ≤1mV RMS 5Hz~1MHz

CH3 3~6V 1A Fixed

CH4 8~15V 1A Fixed

CH3/CH4 ≤5mV ≤10mV ≤2mV RMS 5Hz~1MHz

Order # 72-6905

Description MSRP (ea.) Quad Output 3 Amp $499.00 $411.00 Power Supply 72-6905C With Calibration Certificate Call For Pricing NET 30 Terms

413

21

Dual Output Power Supply

Features: •Dual isolated outputs, 175W maximum each •High resolution setting •Compact and lightweight •Variable overload protection trip •Low noise •Excellent transient response •Power flex design gives variable voltage and current combinations ranging from 0~35VDC, 0~10A •Compact and lightweight

®

C53_pg_414-415

section

21

8/14/08

1:04 PM

Page 414

Test Equipment

®

Multi Range Switch Mode Power Supply Compact adjustable laboratory supply is ideal for test, measurement and service applications where tight voltage and current regulation are critical. Its unique feature is that it delivers up to 80W of constant output power in three selectable ranges. Output on/off control allows user to set voltage and current with the supply’s output turned off. Additionally, a front panel “review” button displays voltage and current settings, without a connected load. Multiple units may be cascaded in master/slave configuration to suit higher voltage or current requirements. Features: •Efficient switch mode design •Extremely compact footprint •Remote sensing •Four digit LED display •Simultaneous display of voltage and current •Auto selecting constant voltage (CV) and constant current (CC) modes •Ultra quiet convection cooling •Short circuit, overload, over voltage and thermal protection •75% efficiency at maximum •RoHs compliant

®

Switch Mode Laboratory DC Power Supplies Precision adjustable supplies are ideal for test, measurement and service applications where tight voltage and current regulation are critical. Highly efficient switch mode design delivers outstanding performance from an extremely compact footprint. Unique separate output ON/OFF control allows voltage and current setting, with the supply output turned off. Features: •Backlit four digit LCD display •Simultaneous display of voltage and current •Auto selecting constant voltage (CV) and constant current (CC) modes •Ultra quiet convection cooling •Short circuit, overload, over voltage and thermal protection •84% efficiency at maximum output •RoHs compliant Model Voltage range Current range Voltage regulation Load (from 10~100%) Line (from 90~132VAC) Ripple and noise (rms) Ripple and noise (p-p) Current regulation Load (from 10~100%) Line (from 90~132VAC) Ripple and noise (p-p) Dimensions/weight Order # 72-8340 72-8340C 72-8345 72-8345C 72-8350

72-8340 1.0 ~ 60.0VDC 0~1.6A

72-8345 1.0 ~ 36.0VDC 0~3A

72-8350 1.0 ~ 20.0VDC 0~5A

50mV 20mV 5mV 50mV

50mV 20mV 5mV 30mV

70mV 20mV 5mV 30mV

20mA 20mA 20mA

20mA 20mA 20mA 6" (H) x 2.8" (W) x 9.8" (D)/4.4 lbs.

20mA 20mA 20mA

Model 1~60V, 0~1.6A With Calibration Certificate 1~36V, 0~3.0A With Calibration Certificate 1~20V, 0~5.0A With Calibration Certificate

MSRP $229.00

(ea.) $179.00 Call For Pricing 179.00 Call For Pricing 179.00 Call For Pricing

229.00 229.00

Specifications Selectable ranges

0~16V, 0~5.0A 0~27V, 0~3.0A 0~36V, 0~2.2A

Voltage regulation Load (from 0~100%) Line Ripple and noise (p-p) Current regulation Load (from 0~100%) Line Power requirements Dimensions Weight Order # 72-8355 72-8355C

≤ 20mV ≤ 4mV ≤ 30mV ≤ 10mA ≤ 10mA 90~264VAC, 47~63Hz 5" (H) x 2" (W) x 13" (D) 4.2 lbs.

Description Multi Range Switch Mode Power Supply With Calibration Certificate

MSRP $299.00

(ea.) $259.00 Call For Pricing

®

Switch Mode Laboratory DC Power Supplies

21

Precision adjustable supplies are ideal for testing, calibration and service applications where tight voltage and current regulation is critical. Coarse and fine adjustments for voltage and current enable precise control. Dual digital displays simultaneously show voltage and current to 0.1V (amp). Efficient switch mode design enables very high output current in a compact lightweight package that is a fraction of the size of traditional models. Specifications Voltage line/load regulation Ripple and noise Recovery time Current line/load regulation Ripple current 72-7685 72-7690 72-7700 72-7705 Insulation Chassis and terminal Chassis and AC cord Power requirements Dimensions/weight Order # 72-7685 72-7985C 72-7690 72-7690C 72-7700 72-7700C 72-7705 72-7705C

414

<5mV <5mV RMS <5µS (50% load change, min load 500mA) 3mA

0~20A 0~15A 0~6A

MSRP $549.00 549.00 549.00 549.00 -

(ea.) $484.00 Call For Pricing 484.00 Call For Pricing 484.00 Call For Pricing 484.00 Call For Pricing

0~30VDC 0~3A 0~60V, 0~3A 0~30V, 0~6A

Ripple & noise

< 0.01% + 3mV < 0.01% + 3mV (rating current < 3A) < 0.02% + 5mV (rating current > 3A) < 1mV RMS (5Hz~1MHz)

Constant current mode (CH-1, CH-2) Line regulation Load regulation Ripple & noise Dimensions/weight

< 0.2% + 3mA < 0.2% + 3mA < 3mA RMS 53⁄4" (H) x 101⁄4" (W) x 105⁄8" (D)/15.4 lbs

Order # 72-7245 72-7245C

1-800-543-4330 Fax 1-800-765-6960

LIMITED 1 YEAR WARRANTY

Laboratory grade power supply provides adjustable 0~30VDC output, and 0~3A adjustable current limiting, on each of two isolated channels. Four independent three–digit LED displays simultaneously show output voltage and current for each channel. Features: •Auto series or parallel tracking operation •Constant voltage and constant current operation •Overload and reverse polarity protection •Temperature controlled variable speed fan •Very low ripple and noise •Power requirements: AC100V/120V/220V/240V ±10% 50/60Hz •Includes test leads and owners manual

Constant voltage mode (CH-1, CH-2) Line regulation Load regulation

>20MΩ >30MΩ 115V/230VAC ±10%, 50Hz/60Hz 5.7" (H) x 5.0" x 11.2" (D)/7.1 lbs. Output Current 0~30A

Dual Output Bench Power Supply

Specifications Output voltage (each channel) Output current (each channel) Tracking series output Tracking parallel output

<30mA RMS <10mA RMS <5mA RMS <3mA RMS

Output Voltage 0~12VDC With Calibration Certificate 0~18VDC With Calibration Certificate 0~24VDC With Calibration Certificate 0~60VDC With Calibration Certificate

®

Description Dual Output Bench Power Supply With Calibration Certificate

MSRP $359.00 -

(ea.) $329.00 Call For Pricing

C53_pg_414-415

8/14/08

1:05 PM

Page 415

Test Equipment

®

Adjustable Switch Mode Power Supply Laboratory grade switching power supply provides adjustable 0~40VDC output, and 0~5A adjustable current limiting. OVP (Output Over-Voltage Protection) protects voltage sensitive loads by shutting down the supply when output exceeds set voltage. Efficient switch mode design provides very high output capabilities, in a small, lightweight unit. Dual 31⁄2 digit LED displays simultaneously indicate output voltage and current. Features: •Excellent load and line regulation •Low ripple and noise •Coarse/fine voltage and current adjustments •Auto cross-over for CC (Constant Current) and CV (Constant Voltage) modes •Thermostat controlled fan •Overload, over temperature and short circuit protection Specifications Output voltage Output current Load regulation Line regulation Ripple and noise Power requirements Dimensions/weight Order # 72-7295 72-7295C

MSRP $249.00

(ea.) $188.00 Call For Pricing

®

High current supply is a popular choice for servicing a wide variety of electronic devices. Variable output is adjustable from 0~30VDC, with 0~10A current limiting. Dual LCD display simultaneously shows output voltage and current. Individual fixed 12VDC and 5VDC outputs are also provided for TTL and CMOS circuits. All outputs are fully isolated, allowing series connection in any combination, for greater voltage flexibility. Temperature controlled, variable speed fan cooling ensures quiet, reliable operation. 3⁄16" diameter binding posts accepts banana plugs or spade terminals, providing access to the variable output. Push terminals are provided for each fixed output. Features: •Large 5⁄8" digit LCD display •Display accuracy to 0.1V, 0.1A •Excellent load and line regulation •Low ripple and noise •Overvoltage, overload, temperature and short circuit protection •Detachable IEC power cord

Order# 72-7660 72-7660C

®

LIMITED 1 YEAR WARRANTY

Triple Output DC Power Supply

Order# 72-6628 72-6628C

Description Triple Output DC Power Supply With Calibration Certificate

MSRP $199.00 -

(ea.) $167.00 Call For Pricing

Front

®

Compact Switch Mode Power Supply

Triple Output 10 Amp Power Supply

Specifications Variable output Fixed output (#1) Fixed output (#2) Load regulation Line regulation Ripple and noise Power requirements Dimensions/weight

21

Features: •Triple output: 0~30VDC adjustable output plus 5V and 12V fixed outputs •0~3A adjustable current limiting •Constant voltage or current operation •Overload and short circuit protection •Current limiting indicator •LCD digital ammeter and voltmeter •High current binding post output for 0~30V supply and easy snap on output terminals for 5V and 12V supplies •Power requirements: 120VAC, 60Hz

0~40VDC 0~5A 0.5% + 100mV 50mV 20mV (p-p) 90~265VAC 50/60Hz 41⁄2" (H) x 8" (W) x 103⁄4" (D)/6.6 lbs.

Description Adjustable Switch Mode Power Supply With Calibration Certificate

section

0~30VDC, 0~10A 12VDC, 500mA 5VDC, 500mA 50mV 10mV 5mV (RMS) 120VAC, 60Hz 43⁄4" (H) x 8" (W) x 13" (D)/ 22 lbs.

Description Triple Output 10 Amp Power Supply With Calibration Certificate

MSRP $249.00 -

(ea.) $209.00 Call For Pricing

Efficient switch mode power supply features a very compact footprint that makes it an ideal match for portable communications equipment. Its 50% duty cycle surge rating comes in handy in demanding transmitting situations. Perfect for two–way radio (including HF) and audio equipment Back including autosound and multimedia systems. Output voltage is fixed at 13.8VDC, recessed adjustment screw is located on the underside of the unit for user fine adjustment from 13.3~14.5VDC. Features: •Ultra high RFI immunity •Very quiet thermostat controlled variable speed fan •Overvoltage and short circuit protection •Thermal cut–off protection •LED overload indicator •Convenient front panel cigarette lighter receptacle •Rear panel heavy-duty binding posts Specifications Output voltage Continuous output Duty cycle (50% on/off) Load regulation Line regulation Ripple and noise Efficiency Power requirements Dimensions (H x W x D) Weight Order# 72-8110 72-8110C

13.3~14.5VDC 15A 18A 100mV 50mV 50mV (p-p) >80% 110VAC, 60Hz 2.5" x 7.2" x 7.5" 3.91 lbs.

Description Compact Switch Mode Power Supply With Calibration Certificate

MSRP $99.95 -

(ea.) $89.95 Call For Pricing

®

High Current Switch Mode Power Supply

Specifications Output voltage Continuous output current Load regulation Line regulation Ripple and noise Efficiency Power requirements Dimensions (H x W x D) Weight Order # 72-8115 72-8115C 72-8116 72-8116C

#72-8115

21

Back Efficient switch mode power supply features a very compact footprint and lightweight design. It is perfect for telecommunications equipment, two–way radio (including HF) and audio equipment including high power autosound and multimedia systems. Features: •Ultra high RFI immunity •Very quiet thermostat controlled variable speed fan •Overvoltage and short circuit Front protection •Thermal cut–off protection •Bi–color LED power/overload indicator •Rear panel heavy-duty binding posts #72-8116 13.8VDC fixed 25A

40A 200mV 50mV 50mV (p-p) >78% 110VAC, 60Hz

4.33" x 8.67" x 8.67" 1.21 lbs. Description 25A With Calibration Certificate 40A With Calibration Certificate

4.33" x 8.67" x 11.81" 1.1.61 lbs. MSRP $139.00 189.00 -

(ea.) $109.00 Call For Pricing 167.00 Call For Pricing

www.mcmelectronics.com

NET 30 Terms

415

C53_pg_416-417

section

21

8/14/08

1:06 PM

Page 416

Test Equipment

®

Heavy Duty 40 Amp Power Supply ®

Heavy-Duty 60 Amp Power Supply High current supply is fully adjustable from 1~15VDC, making it suitable for communications racks, HAM radio stations, autosound display and servicing. Remote sensing input allows output voltage to be measured externally, ideal when the load is located some distance from the power supply. Output voltage is adjusted via front panel control, external 5Kohm potentiometer (#28-0678 not included), or external 0~5VDC control source. Efficient switch mode design provides very high output current in a compact lightweight package. Temperature controlled, variable speed fan cooling ensures quiet, reliable long-term operation. Dual LED digital display simultaneously shows output voltage and current. Front panel banana jacks provide convenient access for loads up to 5A. Heavy-duty, rear mounted 3⁄8" stud posts accept banana plugs, ring terminals or spade lugs for loads up to 60A. Features: •Remote voltage control •Remote sensing •Large 5⁄8" high LED digits •Display resolution to 0.1V, 0.1A •Excellent load and line regulation •Low ripple and noise •Overvoltage, overload, temperature and short circuit protection •Detachable IEC power cord Specifications Output voltage Output current Load regulation Line regulation Ripple and noise Efficiency Meter accuracy Power requirements Dimensions/weight Order# 72-7655 72-7655C

®

MSRP $399.00 -

(1–3) $47.95

Description Heavy Duty 40 Amp Power Supply With Calibration Certificate

MSRP $299.00 -

(ea.) $261.00 Call For Pricing

Heavy-Duty 25 Amp Power Supply (ea.) $314.00 Call For Pricing

Multiple Outlet DC Power Strip

MSRP $74.95

3~15VDC 40A 230mV 80mV ±10% 10mV (RMS) 100~240VAC, 50~60Hz 41⁄4" (H) x 83⁄4" (W) x 113⁄4" (D)/ 7.7 lbs.

®

Convenient when a number of permanent items are connected to a power supply, while others are routinely added and removed. Attached 8AWG cable is terminated with gold plated, color–coded spade lugs. Binding posts accept spade terminals, bare wire, single or paired banana plugs. This unit is divided into two independent sections, with a combined total current capacity of 35A. Section One: •Two sets of heavy-duty, individually fused binding posts, current capacity 35A each, total max combined capacity 35A •0~35A analog ammeter Section Two: •Six sets of 10A binding posts, 15A max total capacity •15A fuse •0~15A analog ammeter •Lighted rocker switch Other features: •Isolated steel case •Separate ground lug •Dimensions: 21⁄2" (H) x 31⁄2" (W) x 13" (L) Order # 72-6627

Specifications Output voltage Output current Load regulation Line regulation Ripple and noise Power requirements Dimensions/weight Order# 72-7665 72-7665C

1~15VDC 60A 0.1% +5mV 0.05% +3mV 40mV (p-p) 85% ±1% +1 count 100~240VAC, 50~60Hz 41⁄4" (H) x 83⁄4" (W) x 141⁄4" (D)/ 12.8 lbs.

Description Heavy-Duty 60 Amp Power Supply With Calibration Certificate

High current supply is a popular choice for stationary use, or servicing of all types of automotive electronic devices, communications and HAM radio equipment. Variable 3~15VDC voltage range is suitable in a wide range of troubleshooting and repair applications. Efficient switch mode design provides high output current in a compact lightweight package. Whisper quiet fan cooling ensures reliable, long-term operation. Dual digital display simultaneously shows output voltage and current. Front panel 3 ⁄16" diameter binding posts accepts banana plugs or spade terminals, providing convenient access for loads up to 40A. Features: •Bright LED display •Large 5 ⁄8" digits •Display accuracy to 0.1V, 0.1A •Excellent load and line regulation •Low ripple and noise •Overvoltage, overload, temperature and short circuit protection •Detachable IEC power cord

(4–up) $39.95

High current supply is a popular choice for servicing automotive electronic devices and communications equipment. Variable 3~15VDC voltage range is suitable in a wide range of troubleshooting and repair applications. Efficient switch mode design provides high output current in a compact lightweight package. Whisper quiet fan cooling ensures reliable, long-term operation. Dual digital display simultaneously shows output voltage and current. Front panel 3 ⁄16" diameter binding posts accepts banana plugs or spade terminals, providing convenient access for loads up to 25A. Features: •Bright LED display •Large 5⁄8" digits •Display accuracy to 0.1V, 0.1A •Excellent load and line regulation •Low ripple and noise •Overvoltage, overload, temperature and short circuit protection •Detachable IEC power cord Specifications Output voltage Output current Load regulation Line regulation Ripple and noise Power requirements Dimensions/weight Order# 72-7670 72-7670C

3~15VDC 25A 200mV 50mV ±10% 5mV (RMS) 100~240VAC, 50~60Hz 41⁄4" (H) x 83⁄4" (W) x 83⁄4" (D)/ 6.6 lbs.

Description Heavy-Duty 25 Amp Power Supply With Calibration Certificate

MSRP $199.00 -

(ea.) $167.00 Call For Pricing

®

21

True Sine Wave Power Inverter High-quality power inverter provides 300W of continuous 120VAC power from a 12VDC power source. Unlike conventional lower cost inverters, which provide a stair-step “modified” sine wave, this unit provides smooth, pure sine wave output, identical to that from the utility company. This is especially useful when powering sensitive test and measurement equipment and some computer products. Input connections are heavy-duty screw terminals, output is a standard threeprong (NEMA 5-15R) AC receptacle. Features: •Low input voltage alarm •Low battery shut-down •High input voltage shut-down •Temperature controlled cooling fan •Includes cigarette lighter plug and heavy-duty battery clips Specifications: •Output: 300W/500W continuous/surge •Efficiency: 85% •Current draw: 25.6A @ 300W output, 13.8VDC input •Dimensions: 2.6" (H) x 5.7" (W) x 8.4" (D) Order # 72-8135

416

MSRP $179.00

(ea.) $159.00

®

#72-8141

Regulated 13.8VDC Power Supplies

#72-8143 Rugged design provides up to 30 minutes of full load continuous operation. Features: •Cigarette lighter output (3A, 6A and 10A only) •Lighted rocker switch •Analog current meter •Attached 6' three prong grounded power cord Specifications: •Line/load regulation 1.5% •Input voltage: 110~127VAC, 60Hz Order # 72-8140 72-8141 72-8142 72-8143 72-8144

1-800-543-4330 Fax 1-800-765-6960

Continuous 3A 6A 10A 15A 20A

Surge 5A 8A 12A 17A 22A

Dimensions (H x W x D) 31⁄4" x 41⁄2" x 7" 43⁄8" x 51⁄2" x 91⁄4" 43⁄8" x 51⁄2" x 91⁄4" 43⁄4" x 8" x 101⁄4" 43⁄4" x 8" x 101⁄4"

MSRP $39.95 49.95 69.95 94.95 119.00

(ea.) $29.95 37.95 52.95 73.95 94.95

C53_pg_416-417

1

8/14/08

1:07 PM

Page 417

Test Equipment

YEAR LIMITED WARRANTY ®

®

section

21

450VA Isolation Transformer

Isolated Variable AC Power Supplies

Features: •High power handling •Two direct and two isolated outlets •Fused isolated outlets •Fused direct outlets •Illuminated power switch •Power requirements: 120VAC, 60Hz

Variable AC supplies combine the safety benefits of an isolation transformer with the service advantages of a variable autotransformer. •Provides isolation from the AC line when servicing “hot” chassis equipment •Protects AC powered test equipment •Variable 0~145VAC output •Safely troubleshoot power supplies, regulators and output circuits •Minimize damage to associated components•Dual analog meters simultaneously display output voltage and current •Independent line input and variable output fuses provide protection to the variable supply and the equipment under test •Output fuse may be changed to a lower value, allowing service tech to set current limit •Grounded 6' line cord and outlets

Specifications Isolated outlets (2) Direct outlets (2) Isolation leakage Dimensions/weight

450VA continuous, 550VA intermittent 900VA <0.1mA 6" (W) x 5" (H) x 9" (D)/16 lbs.

Order # 72-6670

MSRP $99.95

(ea.) $63.95

Specifications Input voltage Output voltage Max output current Line fuse (included) Output fuse (included) Output outlets Dimensions (H x W x D) Weight

LIMITED 1 YEAR WARRANTY

10A Variable Autotransformer Gives you the ability to vary line voltage between 0~130VAC. Perfect way to safely troubleshoot power supplies, regulators, output sections, etc. Built-in ammeter shows current draw to help identify shorts before they can cause costly component failures. Replaceable fuse protection. Three prong grounded cord and socket provides convenience and safety. Specifications Input Output Current Fuse Order# 72-110 72-110C

Order # 72-1097 72-1097C 72-1098 72-1098C

120V, 60Hz 0~130VAC 10A, 1.3KVA 10A AGC (included) Description 10A Variable Autotransformer With Calibration Certificate

MSRP $199.00 -

(ea.) $169.00 Call For Pricing

#72-1097

#72-1098 100~127VAC 145VAC (with 110VAC input)

3.5A 6A 5A One 53⁄4" x 91⁄8" x 9" 131⁄4 lbs.

Description 3.5A Power Supply With Calibration Certificate 7.0A Power Supply With Calibration Certificate

7A 10A 9A Two 61⁄8" x 117⁄8" x 101⁄4" 173⁄4 lbs MSRP $249.00 399.00 -

(ea.) $169.00 Call For Pricing 314.00 Call For Pricing

®

High Voltage Probe with Digital Meter ®

High Voltage Probe

The Tenma multiplier probe adapts most 10Mohm multimeters into a high voltage meter. Meets IEC1010 safety requirements. Specifications: Maximum working voltage: •40KVDC or peak AC, 28KVAC RMS (60Hz) •Division ratio: 1000:1 •Input resistance: 1000Mohm Accuracy: •DC:± 1% (1KV~20KV) ±2% (20KV~40KV) •AC: ±5% (1KV~28KV RMS, 50/60Hz) Order # 72-3040

MSRP $79.95

(ea.) $52.95

Self contained high voltage probe measures positive or negative voltage up to 40KVDC. Internal 31⁄2 digit, 3999 LCD display provides resolution up to 0.1V with accuracy of 1%. Features: •Three ranges •Peak hold •Auto power off •Low battery indicator •200 hour battery life from alkaline 9V battery •Attached 35" ground lead •Meets IEC1010 safety requirements •CAT II rated Specifications: •Ranges: 400V, 4KV, 40KV •Resolution: 0.1V, 1V, 10V •Input impedance: 2,000Mohm •Max loading current: 20µA •Max loading power: 0.8W •Sampling rate: 4 per second •Dimensions: 16.5" (L) x 3.15" (W) Description High Voltage Probe with Digital Meter With Calibration Certificate

MSRP $229.00 -

(ea.) $179.00 Call For Pricing

®

Oscilloscope/Test Equipment Cart •Slanted top allows technician to view equipment at a convenient angle •Lower shelf for storage •Heavy-duty casters •Adjustable back support with bumpers prevents damage to equipment •Gray •Dimensions: 16" (W) x 19" (L) x 331⁄2" (H) Weight: 25 lbs. Order # 21-1925

MSRP $139.00

(1-2) $109.00

(3-up) $88.25

®

High Voltage Probe with Meter •Built-in meter measures voltages up to 40KVDC •Factory calibrated at 25KV (±2% accuracy); full scale ±3% accuracy •Input impedence: 600Mohm •Meets IEC1010 safety requirements •35" ground lead •Positive polarity only, not for microwave ovens Order # 72-6530

www.mcmelectronics.com

MSRP $149.00 NET 30 Terms

(ea.) $84.95

417

21

Order# 72-6505 72-6505C

C53_pg_418-419

section

21

8/14/08

1:08 PM

Page 418

Test Equipment A

F B

BNC to BNC Jumper Cables •Made of high-quality, 50ohm RG-58U cable with molded strain relief •Male connectors Fig. A A A A A

Order # 24-1455 24-785 24-790 24-795 24-1515

Length 1' 3' 6' 12' 30'

(ea.) $8.69 9.49 10.09 11.09 21.95

(2-4) $8.29 8.29 8.89 10.49 18.95

(5-up) $7.59 7.69 7.99 9.19 15.49

G C

Test Leads Fig. B C D E F F G H H H J K L M N N P P Q R S

Order # 21-605 21-600 21-555 21-1190 21-2235 21-2240 21-560 21-350 21-355 21-3315 21-550 21-670 72-485 72-052 21-565 21-570 21-685 21-690 21-730 21-370 21-360

Description BNC to Alligator Clips BNC to IC Clips Banana to IC Lead Set Banana to Alligator Lead Set Stackable Banana Plug Set (Black/Red) Stackable Banana Plug Set (Black/Red) IC Clip Test Lead Set 24 Gauge Alligator Set (10 pieces) 20 Gauge Alligator Set (10 pieces) 18 Gauge Alligator Set (10 pieces) Universal Test Lead Kit Coiled Test Lead Set Test Probe Set Insulated Test Probe Set IC Clip (Red) IC Clip (Black) Alligator Clip (Red) Alligator Clip (Black) Mini IC Clip (Red) Regular Alligator Clip Heavy-Duty Alligator Clip

Length 39" 39" 36" 36" 3' 6' 36" 24" 24" 24" 36" 3'~6' 48" 48" 23⁄16" 23⁄16" 31⁄4" 31⁄4" 11⁄2" 11⁄2" 2"

(1-9) $5.09 7.99 5.29 4.09 4.09 4.29 3.70 7.29 7.99 9.69 8.49 4.52 13.69 3.99 1.03 1.03 1.69 1.79 1.09 3.49 3.99

(10-24) $4.49 7.49 4.63 3.59 3.69 3.79 3.17 6.69 7.29 8.89 7.69 3.91 10.49 3.70 0.85 0.85 1.41 1.59 0.91 2.71 3.88

(25-49) $4.09 6.99 4.29 3.29 3.39 3.35 2.97 6.29 6.79 8.19 6.89 3.59 0.63 0.63 1.29 1.29 0.78 2.46 3.54

D H

K

E

If You Don’t See The Part You Need

M

CALL! N

P

Q

R

S

M J

®

50ohm Insulated BNC Cable

Features: •Insulated BNC •Ideal for portable oscilloscope and other portable instruments •x1/x10 attenuation •1.2m cable length •10~35pF compensation adjustment •600V maximum input (DC+AC peak) •Meets IEC61010–2–031 CAT I 600V requirements •90 day warranty •Includes accessory kit and storage pouch

(ea.) $10.05 ®

21

50ohm Insulated BNC to Sheathed Stacking Plugs Insulated cable assembly with male BNC to 4mm sheathed stacking plugs, black and red. IEC rating: 500V CAT, 150V CAT III, 3A 50ohm impedance cable. Black insulation boot. 40" length. Order # 76-076

Specifications Bandwidth (x10) Risetime (x10) Input impedance (x1/x10)

100MHz (-3dB) into 16pF <3.5nsec 1MΩ/10MΩ

Order # 76-123

(ea.) $42.95 ®

(ea.) $13.75

Male BNC Adaptor to Binding Posts Black thermoplastic body. Black and red binding post insulators. 500V RMS, 3A. Order # 76-005

418

60, 100, 200 and 250MHz Oscilloscope Probe Kits

100MHz Oscilloscope Probe Kit

Insulated male to male BNC cable assembly to IEC1010 standards 50ohm impedance. Black insulation boot. 40" length. Order # 76-074

®

®

1-800-543-4330 Fax 1-800-765-6960

(ea.) $7.29

Features: •X1/X10 attenuation (#76-107 is X10 only) •1Mohm (X1) and 10Mohm (X10) input impedance •1.2m cable length •10-35pF compensation adjustment •Low noise, improved compensation •#76-107 includes a readout actuator pin on the BNC connector •Meets EN61010-2-031 CAT I (IEC1010) requirements •600V maximum (DC+AC peak) •Includes accessory kit and storage pouch. Specifications 76-109 76-102 76-105 76-106, 76-107 Order # 76-109 76-102 76-105 76-106 76-107 76-110

Bandwidth (X10 position) 60MHz (-3dB) into 18pF 100MHz (-3dB) into 16pF 200MHz (-3dB) into 14pF 250MHz (-3dB) into 14pF

Risetime (X10 position) <5.8nsec <3.5nsec <1.8nsec <1.4nsec

Description (ea.) 60MHz Oscilloscope Probe Kit $26.95 100MHz Oscilloscope Probe Kit 37.95 200MHz Oscilloscope Probe Kit 47.95 250MHz Oscilloscope Probe Kit 73.95 250MHz Oscilloscope Probe Kit w/RO 63.95 Replacement Sprung Hook 5.59

C53_pg_418-419

8/14/08

1:08 PM

Page 419

Test Equipment

Deluxe Test Accessory Kit Kit includes: •Probe bodies with 4mm spring contacts, replaceable 2mm tips with IC caps, black and red, 1000V, CAT III, 36A •Flexible pincer clips, black and red, 1000V, CAT III, 6A •Insulated alligator clips with piercing point, black and red, 1000V, CAT III, 20A •4mm banana plug adaptors, black and red, 42V, 10A •Spring-tip mini probes with IC caps, black and red, 600V, CAT II, 1A •Insulated spade lug adaptors, black and red, 42V, 36A •Leads, 4mm sheathed straight to right-angle plugs, 40" PVC wire, black and red, 1000V, CAT III, 12A Order # 76-082

Right-Angle Test Lead Kit

Set of eight mini-hook patch cords. Each patch cord has miniature hook clips on each end of 19" long PVC wire. Set consists of two black, two red, one green, one yellow, one blue and one white cords. 2A max. Order # 76-004

(kit) $33.95

•Safety lead to IEC1010 specification •Sheathed 4mm plugs with insulated tips on highly flexible silicone jacketed wire •60" length Order 76-016 76-017

Color Red Black

(ea.) $7.69 7.69

Pincer style contacts revolve and can grab terminals to 0.16 (4mm) in diameter. Flexible shaft bendable to +90°. Color Red Black

(ea.) $7.34 6.99

Insulated Spade Lug Adaptors •6mm spade lug to 4mm sheathed jack. •Rating: 750V, 36A. Order 76-078 76-079

Color Red Black

(ea.) $2.09 2.09

Miniature Alligator Clip With Insulator Mini-alligator clip with 3mm wire connection socket. Vinyl insulator. Steel, nickel plate. 2A max. Ten per bag. Color Red Black

(bag) $4.05 4.05

Retractable Stacking Plug Test Leads Features: •4mm stacking banana plugs with clear retractable safety sheath •Flexible PVC jacketed wire •Nickel plated contacts •12A, 750V rated •40" length Order# 76-120

Tweezer Set SMD component testing tweezers. Isolated contact tips in each leg connects to 4mm banana plugs, black and red; 1m cable length. Durable gold plated BeCu contact tips grip small components during testing. Cable RG-174/U.

Color Black

(ea.) $7.39

(set) $7.25

Basic Test Accessory Kit Features: •Smooth body probes with replaceable tips, 4mm spring contact with IC tip protector and .080 (2mm), black and red •Safety pincer-flex clips, black and red •IEC leads, 4mm sheathed straight to right angle plugs, PVC, 1m, black and red Order # 76-081

(kit) $34.95

Probes, .080 (2mm) Tip to Stacking Retractile Plug, Silicone Wire

•Extra sharp tips for small surface mount components •One red and one black sharp tip test probe body, 1000V, CAT III, 20A •Highly flexible silicone jacketed wire, one black and one red sheathed 4mm straight to right angle plugs •Safety lead to IEC1010 specifications Order # 76-090

Probe lead with standard .080 (2mm) tips and highly flexible silicone jacketed wire. Instrument plug has retractile sheath for versatility and safety. 40" in length. Order 76-040 76-041

Color Red Black

(ea.) $6.29 6.29

(set) $21.95

IEC Lead, 4mm Sheathed Straight To Right-Angle Plugs, Silicone Wire

IEC Probe, 4mm Spring Tip Sheathed Right-Angle Plug, Silicone Wire

•Safety lead to IEC1010 specifications •Sheathed 4mm plugs with insulated tips on highly flexible silicone jacketed wire Length 40" 60" 60"

Color Red Red Black

(ea.) $7.49 8.49 8.49

Sharp stainless steel tip on extended length probe body. Sheathed 4mm banana jack in handle. Color Red Black

Probe lead to IEC1010-2-031 safety standards. 4mm spring contact tip and highly flexible silicone jacketed wire. Instrument plug is sheathed 4mm plug with insulated tip. 40" in length. Order 76-047

Color Black

(ea.) $5.79

Lead, 4mm Sheathed Right-Angle Plugs, Silicone Wire

Sharp-Tip Test Probe Body Order 76-030 76-031

Order # 76-108A

(set) $17.79

Surface Mount Test Lead Set

Order 76-018 76-020 76-021

Features: •One red and one black 48" PVC flexible jacketed lead •Sheathed right angle DMM plugs •0.08" (2mm) diameter contact tips •Meets 1000V Cat III requirements •10A rating •Includes slide-on alligator clip adaptors

(ea.) $5.19 5.19

www.mcmelectronics.com

Safety lead to IEC1010 specifications. Sheathed 4mm plugs with insulated tips on highly flexible silicone jacketed wire. 40" in length. Order 76-022 76-023 NET 30 Terms

Color Red Black

(ea.) $6.89 6.89

419

21

Order 76-056 76-057

(kit) $19.95

Order # 76-001

Safety Pincer Flex Clip

Order 76-060 76-061

Kit includes: •One red and one black 60" silicone jacketed lead with sheathed right-angle DMM plugs and 4mm banana plug contact tips •Probes and leads meet 1000V CAT III P2 requirements, 36A •One red and one black sprung hook probe adaptor •Spring hook meets 500V CAT1 requirements Order # 76-091

IEC Lead, 4mm Sheathed Straight Plugs, Silicone Wire

21

Test Lead Set

(kit) $56.95

Test Clip Lead Kit

section

C53_pg_420-421

section

21

8/14/08

1:09 PM

Page 420

Test Equipment

Combination 8MHz Oscilloscope/DMM ✔160 x 160 dot matrix monochrome display ✔Built-in 3999 count DMM ✔USB interface with data logging software Compact hand held unit provides outstanding DMM performance plus added functions of a single channel oscilloscope. DMM features: •3999 count display •Voltage, current, resistance, capacitance and frequency measurement •10MΩ input impedance •Continuity buzzer Diode test scope features: •8MHz bandwidth •40MS/s sample rate •160 x 160 pixel monochrome display •Normal, free run and single shot trigger modes •Ten screen and set-up memory General features: •USB interface •Backlit display with adjustable brightness and contrast •Sleep mode •Low battery indicator Includes: •USB cable •Data logging software •Test leads •Alligator clip adaptors •AC adaptor •Requires four “AA” batteries, not included Specifications DC voltage AC voltage DC current AC current Resistance Capacitance Frequency Vertical accuracy Input sensitivity Horizontal accuracy Timebase range Sample rate Duty cycle Dimensions Order # 72-8220

Range 400mV, 4V, 40V, 400V, 1000V 4V, 40V, 400V, 750V 400µA, 4000µA, 40mA, 400mA, 4A, 10A 400µA, 4000µA, 40mA, 400mA, 4A, 10A 400Ω, 4KΩ, 40KΩ, 400KΩ, 4MΩ, 40MΩ 40nF, 400nF, 4µF, 40µF, 100µF 10Hz~10MHz

Best Accuracy ±(0.8% +8) ±(1% +15) ±(1% +8) ±(1.5% +8) ±(1% +5) ±(3% +8)

±(0.1% +3) ±(5% +1) 20mV/div~500V/div ±(0.01% +1) 100ns/div~5s/div 40MS/s (real time) 0.1% ~ 99.9% 1.9" (H) x 3.9" (W) x 7.9" (D) Model # UT-81B

(ea.) $261.00

21

Smooth probe body with sheathed 4mm jack in handle. Standard .080 (2mm) brass tip. Color Red Black

The 2000 Series of digital storage oscilloscopes from Uni-T provide a cost effective combination of performance and ease of use in a highly portable and compact instrument. Models feature real time sampling rates of 500MS/s and are available with bandwidths from 40MHz~200MHz. Features: •Color LCD display •Edge, pulse and video triggering on channel CH1 and CH2 •Rising and falling edge triggering •8 bit A/D convertor, two channels sampling simultaneously •Separate USB host and device ports •RS-232 port •Quiet convection cooling •Compact size, requires only 5" of depth on the bench •See www.mcmelectronics.com for complete specifications Specifications Model # UT-2042C Bandwidth 40MHz Real time sampling rate Equivalent sampling rate Input Input couplin Input impedance Probe attenuation Max input voltage Channel interval Channel time delay (typical) Horizontal Interpolation Records Scan range (S/div) 10ns/div~ 50s/div Vertical Analog bandwidth 40MHz Selectable bandwidth limit Trigger Rise time <8.7ns Trigger sensitivity Trigger level range Pre trigger capability

UT-2062C UT-2082C UT-2102C UT-2152C 60MHz 80MHz 100MHz 150MHz 250MS/s each channel, 500MS/s both channels combined 25GS/s

(ea.) $3.89 3.02

Sine(x)/x Depth: 25K each channel, Length: 2 x 512K 5ns/div~ 5ns/div~ 5ns/div~ 50s/div 50s/div 50s/div

2ns/div~ 50s/div

2ns/div~ 50s/div

150MHz

200MHz

<5.8ns <4.5ns <3.5ns <2.3ns DC~10MHz: 0.5div, 10MHz~max bandwidth: 1div Internal: Display center ±10div, External ±1.6V Normal mode/scan mode, pre-trigger/delayed by time trigger. Pre-trigger depth is adjustable. 100ns~1.5s

<1.8ns

60MHz

80MHz 20MHz

100MHz

Internal: 2div peak value, External: 400mV Supports NTSC and PAL broadcast standards, line range:1~525 (NTSC), 1~625 (PAL)

General Display Resolution Dimensions Weight Power requirements

5.7" color LCD 320 x 240 pixels 5.9" (H) x 12.6" (W) x 5.1" (D) 5.75 lbs. (2.6KG) 100VAC~240VAC, 45Hz~440Hz, 30W

Order # 72-8225 72-8230 72-8235 72-8240 72-8245 72-8250

Model # UT-2042C UT-2062C UT-2082C UT-2102C UT-2152C UT-2202C

Bandwidth 40MHz 60MHz 80MHz 100MHz 150MHz 200MHz

Order 76-054 76-055

420

Color Red Black

(1-9) $4.29 4.29

•For use with standard 14~40 pin DIP ICs •The insulated pin hood surrounds the DIP pins to prevent accidental shorting •High-quality molded hinge spring, ensures positive pin contact •Gold plated contacts to ensure low resistance connections

Replaceable Tip Probe Body Set (10-24) $3.99 3.99

(25-up) $3.49 3.49

(ea.) $650.00 775.00 895.00 975.00 1095.00 1225.00

IC Test Clips

Fully Insulated IEC Alligator Clip Insulated alligator clip meets IEC1010 safety standards to 1000V. Insulation piercing feature adds versatility to usage.

UT-2202C 200MHz

AC, DC or ground 1MΩ ±2%, 18±3pF 1x, 10x, 100x, 1000x 400V (AC + DC peak, 10:1 attenuation) ≥40:1 150ps

Release range Video triggering Trigger sensitivity Trigger type

Probe Body With .080 (2mm) Tip Order 76-036 76-037

Dual Channel Digital Storage Oscilloscopes

Black and red smooth body probes with replaceable tips, 4mm spring contact with IC tip protector and .080 (2mm) brass. Pouch included. Order # 76-080

1-800-543-4330 Fax 1-800-765-6960

(set) $6.99

Order # 22-660 22-665 22-670

Pins 24 28 40

Dimensions (W) x (L) 11⁄4" x 11⁄2" 17⁄16" x 11⁄2" 21⁄16" x 17⁄16"

(ea.) $12.49 15.95 19.95

(2-4) $11.39 15.24 19.12

(5-up) $10.70 14.50 18.19

C53_pg_420-421

8/14/08

1:09 PM

Page 421

Test Equipment

section

21

#73-935 #73-420

#73-505

Analog Oscilloscopes •Dual channel •Sweep system •Adjustable triggering modes •Dual time base •Calibrated 23 step time bases Specifications #73-952 Model # 2190B Vertical Amplifiers (CH1 and CH2) Bandwidth 100MHz Sensitivity 5mV/div to 5V/div. 1mV/div to 1V/div (at x5 MAG) Accuracy ±3% (±5% at x5 MAG)

#73-420 2120B

#73-953 2125A

#73-505 2160A

30MHz 30MHz 60MHz 5mV/div to 5V/div. 5mV/div to 5V/div. 5mV/div~ 1mV/div to 1V/div 1mV/div to 1V/div 1V/div x 5mag (at x5 MAG) (at x5 MAG) ±3% +-3%, +-3%, 5mV~5V/div; (±5% at x5 MAG) +-5% at x5 +-5%, 1 mV, 2mV/div

Input impedance 1MΩ +3% 1MΩ +3% 1MΩ±2% 1MΩ±2% Input capacitance 25pF ±10pF 25pF ±10pF 25pF ± 10pF 25pF±10% Frequency response DC: DC to 100MHz DC: DC to 100MHz 5 mV~5V/div: DC to 60 MHz (-3 dB) (-3 dB) DC to 30MHz (-3 dB) x5: DC to 10MHz (-3dB) Rise time 3.5ns (12ns 2120B) 3.5ns (12ns 2120B) 12ns 5.8ns (Overshoot <5%) (Overshoot <5%) (Overshoot <= 5%) (Overshoot <= 5%) Maximum input voltage 400V 400V 400V 400V (DC + AC peak) (DC + AC peak) (DC + AC peak) (DC to AC peak) 800VAC p-p Vertical amplifiers Operating modes CH 1, CH 2, CH 1, CH 2, CH 1: CH 1, CH1, CH2, dual, dual, add dual, add single trace alternate/chop Horizontal amplifier X-Y Mode X Axis = CH1. X Axis = CH1. Switch selectable using CH1: Y axis. Y Axis = CH2 Y Axis = CH2 X-Y switch, CH2: X axis CH1: X axis CH2: Y axis Sensitivity 5 mV/div to 5 V/div, 5 mV/div to 5 V/div, Same as vertical Same as vertical CH1 and CH2 CH1 and CH2 channel 2 channel 2 Price $1565.00 $538.00 $632.00 $1075.00

#73-495 1541D

#73-951

40MHz 5mV/div~ 1V/div x 5mag 5 mV/div~ 5 V/div +- 3% (x5 gain),+-5% 1MΩ ±2%, 25pF ± 0% DC to 40MHz (-3dB), DC to 7MHz (-3dB) at x5 gain 8.8 ns (Overshoot <= 5%) 400V (DC + AC peak) CH1, CH2, dual, alternate/chop

Triple Output DC Power Supply •Dual displays •Selectable outputs •Variable and fixed outputs •Independent or tracking operation •Adjustable current limiting •Designed to operate continuously at rated output •Short circuit protection, overload protection, reverse polarity protection Specifications Model # Output voltage

#73-935 1670A Variable 0~30VDC Fixed 12VDC (+5%) Fixed 5VDC (+5%) Output current 0~3A 0~500mA 0~500mA Metering display 2 digital 3 digit LCD Ammeter range 0~.999A Price $185.00

CH1: Y axis. CH2: X axis Same as vertical channel 1 $782.00

High-Voltage Probe

DC Regulated Power Supplies

•Measures voltages up to 40KVDC •Factory calibrated at 25KV (±2% accuracy); full scale ±3% accuracy •Positive polarity only •Not for microwave ovens Contains: •Two tips, conventional round needle type and flat spring type for easy access B+K # HV-44

(ea.) $114.00

50,000 Count Dual Display Bench Multimeter •PC compatible •Easy to read dual display •Very accurate, feature packed True RMS (AC, AC + DC) bench DMM •Low cost •Ideal for high schools and technical trade schools, college and university labs, research and development, service, maintenance, test and manufacturing benchtop applications Specifications: •Resistance measurements up to 50MΩ •Measures frequency to 500KHz •DBm measurement •RS-232 interface Includes: •Instruction manual and test leads

CRT Universal Tester Adaptor •Mfr. #CRX-A Order # 73-760

(ea.) $74.95

Order # 73-1020

Mfr. # 5491A

(ea.) $401.00

www.mcmelectronics.com

Compact, laboratory grade, bench top switching DC power supplies utilize standard 115VAC outlet as the power source, providing continuous operation up to 200W, and maximum current output continuously with minimal thermal drift. Features: •Over voltage protection, short circuit temperature •Constant voltage operation •Constant current operations •Presetting current limiting value •Designed with course and fine output voltage and current limiting controls. Specifications: Ripple and noise: 20mV •Line regulation: 20mV •Input voltage: 90~265VAC, 50/60Hz •Meter accuracy: 1%+2 counts •Dimensions: 4.5"(H) x 8"(W) x 10.8"(D) •Weight: 6.6 lbs. Order # B&K # Output voltage: Output current: Load regulation: Meter type: Price NET 30 Terms

73-1025 1665 1~19VDC 0~10A 0.5%+200mV 31⁄2 digit LED $245.00

73-1030 1666 1~40VDC 0~5A 0.5%+100mV 3 digit LED $245.00

73-1035 1667 1~60VDC 0~3.3A 0.5%+100mV 3 digit LED $233.00

421

21

Order # 73-520

#73-951 1671A Variable 0~30VDC Fixed 12VDC (+5%) Fixed 5VDC (+5%) 0~5A 0~500mA 0~500mA 2 digital 3 digit LCD 0~.999A $205.00

C53_pg_422-423

section

21

8/14/08

1:10 PM

Page 422

Test Equipment LCR Meter

LIMITED 1 YEAR WARRANTY

•Measures capacitance, resistance and inductance •Measures dissipation factor of capacitors and Q of inductors •31⁄2 digit LCD display •Low battery and overload indicator •Test leads included •Mfr. #875B

Synthesized In-Circuit LCR/ESR Meter

SMD Probe (included)

Features: •Measurement parameters: Z, L, C, DCR, ESR, D, Q, and Ø •Test conditions: 100Hz, 120Hz, 1KHz, 10KHz, 100KHz (886 only) 1V RMS, 0.25V RMS, 0.05V RMS •0.5% basic accuracy •Dual LCD display •SMD surface mount tweezer probe included •Very quick response, user friendly •Fully auto/manual selection •DC resistance measurement •Rechargeable battery/AC powered •Infrared RS-232 interface capability Software features: •Go-No Go testing (component sorting) •Remote bin (component grading) •Remote operation

Specifications Test signal Frequency

100Hz, 120Hz, 1KHz, 10KHz 100KHz (886 only) Frequency accuracy ±0.1% Level 1V RMS, 0.25V RMS, 0.05V RMS, 1VDC (for DCR) level accuracy ±5% Output impedance 100Ω, ±5% Order # B+K # (ea.) 73-967 885 $553.00 73-968 886 746.00

Order # 73-645

(ea.) $185.00

•3 ⁄2 digit LCD display •Nine ranges: 200pF~20mF •0.1pF resolution •Low battery and overrange indicator Specifications: •Ranges: 200pF, 2nF, 20nF, 200nF, 2mF, 20mF, 200mF, 2000mF, 20mF •Accuracy: ± (0.5% rdg + 1 dgt + 0.5pF) for 200pF~200mF range; ± (1.0% rdg + 1 dgt) for 2000mF range; ± (2.0% rdg + 1 dgt) for 20mF range •Resolution per (range): 0.1pf (200pF ), 1pF (2nF), 10pF (20nF), 100pF (200nF), 1nF (2mF), 10nF (20mF), 100nF (200mF), 1mF (2000mF), 10mF (20mF) •Test frequency: 819Hz (200pF~2mF), 81.9Hz (20mF), 8.9Hz (200mF~20mF) •Comes complete with test leads and owners manual •Mfr. #810C Order # 73-840

422

(ea.) $77.95

21

•Auto scans thin ethernet (BNC), 10Base T (UTP/STP), 100BaseTx, RJ-45, 356A, TIA-568A, and Token Ring cables in seconds •Detects miswiring, polarization, and continuity •Tests ground of shielded twisted pair cables •With remote unit, tests installed cable either from wall plate or patch panel •LED display for clear indication of problems •Protective rubber boot •Belt clip Order # 73-939

B+K # 230A

(ea.) $67.95

Counters A

B LIMITED 1 YEAR WARRANTY

Dual Display Auto Ranging LCR Meter Measures capacitance, resistance (of non-inductive components) and inductance. Components can be measured with selectable test frequencies in series or parallel modes. 41⁄2 digit main LCD displays values to 19,999, and the secondary 3 digit 1,000 count display reads D or Q. Both models can be used in either auto ranging or manual ranging modes. Features: •Selectable test frequencies 100Hz, 120Hz, 1KHz, 10KHz (100Hz and 10KHz model #879 only) •Display hold •Relative mode •Tolerance mode •Backlight (model #879) •RS-232 interface (cable and software required) Includes: Pair of alligator clips, DC 9V battery and users manual Fig. A B

Order # 73-680 73-1095

Mfr. # 878A 879

(ea.) $205.00 284.00

LIMITED 1 YEAR WARRANTY

810C Capacitance Meter 1

Multi-Network Cable Tester

Analog Pocket Sized Multimeter •Some applications still require a good old analog meter for instant measurement •Compact size •Measures DC voltage •Measures AC voltage •Measures DC current •Measures resistance •Measures decibels •9V and 1.5V battery test Order # 73-889

B+K # 117B

1-800-543-4330 Fax 1-800-765-6960

(ea.) $20.95

•Selectable gate times 0.1 sec and 1.0 sec •7 digit LED display •Suitable for VHF communications up to 200MHz •Highly accurate time base •Compact bench top AC powered counter Order # 73-960

B+K # 1803D

(ea.) $205.00

Video Monitor Tester Designed to test both Mac and PC monitors. Features: •16 monitor type/scan resolution selection •Color bar, cross hatch, dot, raster and windows selection •VGA, SVGA, RGB, HV, V selection •Four DB-15 (rear panel) outputs for multiple monitor burn-in •Includes AC adaptor •Mfr. #1280A Order # 73-921

(ea.) $309.00

SenseLite™ LED Flashlight with AC Voltage Detector The SenseLite™ high intensity pocket flashlight can be used to detect the presence of AC voltage at a socket, switch, or wire. Simply place the flashlight near the area to be tested and press the power button. If there is an AC voltage present, the red LED will shine brightly. Features: •AC voltage detection (detects AC voltage from 40VAC~300VAC) •Water resistant •Long battery life •No lithium battery, uses standard alkaline “AAA” battery •100,000 hour bulb •Mfr. #SenseLite™ Order # 73-1015

(ea.) $19.95

C53_pg_422-423

8/14/08

1:11 PM

Page 423

Test Equipment

Portable HDTV Pattern Generator Model 1253 is an affordable HDTV test pattern generator that delivers accurate test patterns for the testing of the most common HDTV displays including Plasma, LCD, TFT, CRT, DLP, GLV, and OLED digital display products. The 1253 can display from its HDTV component (YPbPr) outputs or S-video output (luminance patterns only), fourteen of the most useful patterns for twelve of the most commonly used video formats. It is lightweight and portable and is ideal for on-the-bench and in-the-field testing. The 1253 is a must for TV repair engineers or technicians to test and calibrate digital televisions, video engineers to test and maintain studio equipment, or home theater installation technicians to fine-tune the picture quality of digital televisions. The 1253 displays the most popular formats including 1920 x 1080 30i, 1280 x 720 60p, 704 x 480 60p, NTSC, PAL, SECAM. A unique feature of the 1253 is the Overscan DVD aspect ratio pattern. The feature covers the most commonly use aspect ratios used for all movies recorded to DVD media. Specifications: •Video formats: 1920 x 1080 30i, 1920 x 1080 30p, 1920 x 1080 24p, 1280 x 720 60p, 1280 x 720 30p, 1280 x 720 24p, 704 x 480 60p, 704 x 480 30p, 704 x 480 30i, NTSC, PAL, SECAM •Patterns: SMPTE Bars (75%, 100%), Pluge, Needle, Color Bars (75%, 100%), Cross Hatch (16:9, 12:9, 4:3), DVD aspect ratio (1.33:1, 1.78:1, 1.85:1, 2.35:1), Raster, Multiburst, Focus, Staircase, ANSI Gray, Window, Checker, Overscan-Bounce •Operation: 15 buttons, 1 power switch •Y Output: 1V peak-to-peak into 75ohm, on BNC •Pb, Pr Outputs: 0.7V peak-to-peak into 75ohm, on BNC •S-video (SVHS): 5 pin DIN •Video output buffer response: 100MHz @ -3db •Power supply: 9V alkaline battery •Power indicator: Red LED •Timing accuracy: 25ppm (0.0025%) •Video level error: < 1.5% •Size: 5.6" (L) x 3.1" (W) x 1.1" (D) •Weight: 6.2 oz. Order # 73-990

1

Mfr. # 1253

This convenient kit includes a portable HDTV pattern generator (#73-990) and NTCS generator (#73-891) with carry case. Order # 73-995 73-998

LIMITED 1 YEAR WARRANTY

Video Monitor Tester •Tests PC and MAC monitors •Generates crosshatch, dots, color bars and raster patterns in green, blue, red, black and white •CGA, VGA, SVGA •Standard DB–9, DB–15 and DB–15 Hi–res mini connectors •Power requirements: One 9V battery (included) or AC adaptor (not included) •Mfr. #1275

Mfr. # 1253/1257 KIT Carry case

(kit) $699.00 31.95

NTSC Generator with RF Output •Portable NTSC Pattern Generator with RF, S-video, composite video •Video patterns: Color bars (white, yellow, cyan, green, magenta, red, blue and black), crosshatch, dot, staircase, circle, raster (white, red, green, blue, yellow, cyan, magenta and black), window, center cross •Interlaced or progressive scanning system •Composite video: 1.2V p-p into 75ohm •S-video: Chrominance output: 0.75V p-p into 75ohm, luminance plus sync output: 1V p-p into 75ohm •RF output: CH3 (61.25MHz) crystal controlled •Sound: 1KHz audio tone •Power requirements: One 9V battery (included) or AC adaptor (not included) •Mfr. #1211E

Order # 73-892

Order # 73-926

(ea.) $194.00

(ea.) $238.00

Pinger Plus Network IP Tester

CableTool TDR Cable Length and Fault Meter LanMaster 26 Pro Link Tester and Accessory Kit

Mfr. # LM26 AP-1

(ea.) $199.00 19.95

An essential tool for anyone in the cabling industry, this hand held tester is used for installing and maintaining metallic cabling. Uses TDR technology to quickly determine the distance to a cable fault (open or short) in feet or meters. Ideal for contractors, electricians and low voltage installers. Features: •TDR, volt meter and tone generator in one product •Measures distance to shorts/opens up to 2500' •Over 60 pre-stored standard and four user defined NVP values for accurate length measurements •Measures and displays voltages up to 250V RMS •Transmits a tone onto the line for cable tracing •Standard banana jack connectors are compatible with a wide range of leads or connectors for testing any cable type. Includes: CableTool, BNC adaptor, “F” coax adaptor, two test leads, four “AA” batteries, instruction manual Order # 72-7960

Mfr. # CT50

(ea.) $279.00

www.mcmelectronics.com

Hand held tester used for installing and maintaining computer Local Area Networks (LANs) running the TCP/IP protocol. Features: •PINGs at full 10/100 auto negotiate speeds •PING using variable packet sizes •PING up to 99 consecutive times •PINGs single, list, or range of IP addresses •Identifies 10/100/1000 BaseTX Link signals •Stores up to 8 preprogrammed profiles that include Pinger Plus+ IP address, gateway address and 1 to 8 destination IP addresses that can be PINGed individually or successively •Verifies LAN operation at a remote location over the internet •Displays MAC address for a tested IP address •Provides port ID function (link light activation) •Identifies wire pair polarity •DHCP client capability •Web browser interface for unit setup and software upgrade •Alphanumeric keyboard for easy IP address entry Includes: •Pinger Plus, four “AA” batteries, AC adaptor, carrying case, user guide Order # 72-7955

NET 30 Terms

Mfr. # PNG65

(ea.) $359.00

423

21

The LanMaster 26 provides critical network connectivity and configuration information needed to maintain and troubleshoot a LAN at an affordable price. Features: •Verifies connectivity for 10/100/1000 BaseTX links •Identifies VoIP (Voice over IP) and PoE (Power over Ethernet) ports •Measures port voltage to ensure proper voltage level and warns of low voltage levels •Identifies speed, duplex mode and auto-negotiation for 10/100/1000/VoIP/PoE ports •Provides port identification function (link light activation) •Identifies connection as LAN, NIC or auto crossover. Includes: Pro link tester, 9V battery, RJ-45 coupler, user guide. The accessory kit contains a cordura carrying case, RJ-45 jumper cable and female-to-female adaptor. Description Pro Link Tester Accessory kit

21

Portable HDTV Pattern Generator and NTSC Generator Kit

(ea.) $612.00

YEAR LIMITED WARRANTY

Order # 72-7970 72-7980

section

C53_pg_424-425

section

21

8/14/08

1:12 PM

Page 424

Test Equipment

Attention Educators: You may be eligible for a 25% discount on selected Fluke products through the Fluke Education Partnership Program. Call one of our friendly account representatives for complete information.

114/115/117 True-RMS Multimeters

105-655 115

105-660 117

VoltAlert™ • AutoVolt/LoZ • • Current 10A 10A Diode • • Capacitance 1nF~9,999µF 1nF~9,999µF Frequency .1Hz~50KHz .1Hz~50KHz Price $129.95 $149.95 $179.95

The new 83V and 87V have improved measurement functions, troubleshooting features, resolution and accuracy to solve more problems in electronics, plant automation, power distribution and electro-mechanical equipment. Both operate very similar to the classic 83 and 87, but with more problem solving power, safety, convenience and impact protection. Included accessories: TL75 test leads, AC72 alligator clips, removable holster, 9V battery (installed), operator’s guide, CD-ROM with user manuals, bead type thermocouple temperature probe (87 only).

LIMITED 3 YEAR WARRANTY

Multimeters for every application! 114 is the electrical multimeter tool for troubleshooting and “go/no-go” testing. It includes a feature to eliminate inaccurate readings caused by “ghost” (stray) voltage. 115 is the multimeter for field service technicians and is the solution for a wide variety of electrical and electronic testing applications. 117 is the electrician’s multimeter with integrated non-contact voltage detection. It’s the ideal meter for demanding settings like commercial buildings, hospitals and schools. All three meters include: •Resistance and continuity •Large white LED backlight to work in poorly lit areas •Min/max/average to record signal fluctuations •Cat III 600V safety rated •Digital display: 6000 counts, updates 4/sec Order # 105-650 Fluke model 114

80 Series V Digital Multimeters

105-275 ToolPak (TPAK)

$30.64

170 Series DMMs Tough. Precise. Packed with features: •Lifetime warranty •True-RMS AC voltage and current •Min/Max/Average •Frequency and capacitance capabilities •Easy access battery door •Auto ranging •The 179 measures temperature in °C and °F Features 6000 count display Auto hold and manual hold IEC 1010 Rating: CAT IV 600V/CAT III 1000V Backlight for measurements in low visibility environments Temperature measurements in °C and °F, Thermocouple included Battery door provides battery access without breaking the calibration seal Compatible with Fluke ToolPak™ meter hanging kit (#105-275) Order # 105-295 105-300 105-305 105-410 105-275

Mfr. # 175 • • •

Mfr. # 177 • • •

Mfr. # 179 • • •

•

• •

•

•

•

•

•

•

Mfr. # 175 177 179 179/TPK (includes 179 and ToolPak) ToolPak

(ea.) $229.95 239.95 249.95 259.95 30.64

77-4 Digital Multimeter

21

HVAC Multimeter with Temperature and Microamps Quickly troubleshoot problems with HVAC equipment and flame sensors. Test motor start and run capacitors up to 10,000 microfarads. Measurements up to 600VAC or DC, 40mΩ, diode test and exceptionally fast continuity. Features: •Built-in thermometer and temperature probe included •Microamps to test flame sensors •LoZ: Low input impedance to eliminate ghost (stray) voltage to make more accurate measurements •Resistance, continuity, frequency and capacitance •CAT III 600 V safety rated •Includes TL75 hard point test lead set and manual •Mfr. #116 Order # 105-670

424

(kit) $169.95

Versatile meter for field service or bench repair, it has the features needed to repair most electrical and electronic problems. Simple to use. Significant improvements over Fluke’s original 70 series with more measurement functions, conformance to the latest safety standards, and a much larger display that’s easier to view. Measurements: •Wide 1000V measurement range •Average responding AC measurements •0.3% accuracy •10A continuous •Frequency, capacitance, resistance, continuity Features: •Backlight for work in dim areas •Min/max •Auto and manual ranging •Includes: User’s manual, CD-ROM, TL75 test lead set, holster and 9V battery (installed) •Visit www.mcminone.com for complete specifications Order # 105-680

1-800-543-4330 Fax 1-800-765-6960

(ea.) $249.95

Order # Fluke model Features: True-RMS AC voltage and current for accurate measurements on non linear signals Selectable filter for accurate voltage and frequency measurements on motor drives 0.05% DC accuracy 41⁄2 digit mode for precise measurements Built-in thermometer lets you carry one less tool Large display digits and two-level bright white backlight for increased visibility 10,000µF capacitance range for components and motor caps Peak capture to record transients as fast as 250µs Measure up to 1000V AC and DC Measure up to 10A, 20A for up to 30 seconds Auto and manual ranging for maximum flexibility Resistance, continuity and diode test Frequency to 200KHz and % duty cycle Min/Max/Avg recording to capture variations automatically Relative mode to remove test lead resistance from low ohms measurements Improved sleep mode for long battery life Limited lifetime warranty Removable holster with built in test lead and probe storage Cat IV 600 V and Cat III 1000 V electrical safety ratings

105-570 105-565 83-5 87-5

Price

$359.95 $369.95

• • • • • •

•

•

• •

• •

• •

•

•

• • •

• • •

•

•

• • •

• • •

•

•

320 Series Clamp Meters •Both models measure AC current, AC voltage, continuity, and resistance •Model 322 also measures DC voltage •Precise low current measurements with better than 2% basic accuracy •Controls positioned for one–hand operation •Safety rating: IEC 1010–2–031, 600V Cat III •Includes test leads, safety information, instruction card, two “AAA” batteries, and case Order # Mfr. # Description (ea.) 105-330 321 Smaller size, rugged reliability, $102.95 and continuity test function 105-335 322 All of 321 features with DC volts 111.95

C53_pg_424-425

8/14/08

1:12 PM

Page 425

Test Equipment

section

21

Electrical Testers Enjoy all the advantages of traditional solenoid testers, with added functionality, but none of the typical drawbacks. Features voltage measurement, continuity, built-in flashlight, GFCI trip capability, and the legendary ruggedness and reliability of Fluke. The T+ is the A basic electrical tester for B residential electricians and HVAC technicians, who need a durable, reliable tool for testing voltage and continuity. The T+PRO is the ideal, full-featured tester for the demanding commercial and industrial electrician. Both models feature: •3 forms of AC/DC voltage detection: Lights, beeper, and vibration for added user protection and convenience •Still indicates live voltage without battery power for added user protection •Extra-heavyduty, replaceable test leads for added durability •CAT IV 600V, CAT III 1000V rated •AC/DC voltage: 12~600V •Includes test leads and probes, two “AAA” batteries and test lead strap. The T+PRO also features: •Backlit LCD display •Display resolution of 0.1V •Resistance to 9.99Kohm •Rotary field indication •Display hold for easier viewing in hard-to-test areas •Visit www.mcmelectronics.com for complete specifications Fig. A B

Order # 105-690 105-695

Mfr. # T+ T+PRO

(ea.) $49.95 84.95

179 Electronics Multimeter and Deluxe Accessory Kit

87V/AEK Advanced Electronic Combo Kit Fluke has combined the best selling, feature packed 87V multimeter with the TL81A test lead set for the complete solution to electronic circuit board troubleshooting. And realize a $86 savings over individually purchased items. Kit includes: •87V multimeter with temperature frequency, capacitance 250µs peak min/max •TL81A deluxe electronic test lead set, includes 22 of the most useful accessories for making measurements in low energy, electronic applications •C115 deluxe carrying case with shoulder strap •80PK-1 thermocouple bead probe Order # 105-710

Designed to meet the needs of the Electronic’s Professional. Rugged 1000V CAT III multimeter with backlight and industrial strength test lead probe kit in a lightweight, soft case to hold your meter and your accessories. Includes 179 TRMS multimeter, TL224 test leads, TL910 test probes, AC280 heavy-duty hook clips, 80BK integrated temperature probe, ToolPak™ meter hanging accessory, and C35 soft case. Limited lifetime warranty on the multimeter, 1 year on all accessories. Order # 105-675

Mfr. # 179/EDA2

(kit) $279.95

(kit) $419.95

117 True-RMS DMM and 322 Clamp Meter Combo Kit T5 Electrical Testers Features: •OpenJaw™ current measurement up to 100A •Measures AC and DC voltage •Resistance to 1000ohm •Continuity beeper •Compact and rugged design •Available in 600V and 1000V models Order # 105-238 105-239

Mfr. # T5-600 T5-1000

Description 600V tester 1000V tester

330 Series Digital Clamp Meters

(ea.) $99.95 124.95

Kit includes: •117 True-RMS digital multimeter with noncontact voltage detection •322 compact clamp meter •TL75 hard point test lead set •ToolPak magnetic meter hanging strap •C115 deluxe carrying case with shoulder strap Order # 105-665

(kit) $259.95

Order # Mfr. # 105-320 333A 105-321 334A 105-322 335A 105-323 336A 105-324 337A

Description Rugged reliability at a basic price, measures AC amps, AC/DC volts, and ohms with display hold. 400A. Large display with backlight, measures AC amps, AC/DC volts, ohms, display hold, and motor start–up current (in–rush). 600A. True–RMS clamp meter, large backlit display measures AC amps, AC/DC volts, ohms, display hold, and motor start–up current (in–rush). 600A. True–RMS clamp meter that measures AC/DC current and voltage, ohms,display hold, motor start–up current (in–rush) with large display and backlight. 600A. The top of the line True–RMS clamp meter, large jaw measures AC/DC current and voltage, ohms, display hold, motor start–up current (in–rush), frequency, MIN MAX capability and a large backlit display. 1000A.

(ea.) $146.95 166.95 222.95 304.95 354.95

www.mcmelectronics.com

Make industrial troubleshooting even more productive. Save over $50 compared with the individual purchase price. Kit contents: •87V industrial multimeter •Lightweight soft case for optimal protection and accessory storage •1.5m heat resistant silicone leads •Removable probes with 4mm of exposed metal for use on industrial circuits •Retractable long reach alligator clips •Magnetic meter hanger (TPAK) to attach meter to steel panels for hands-free operation •K-type temperature probe Order # 105-645

(kit) $419.95

TLK-225 SureGrip Master Accessory Set with Storage Case The TLK-225 combines the entire new SureGrip accessory line into a single set, then adds a handy roll-up pouch. Includes: AC220 plunger style alligator clips, AC280 plunger style hook clips, AC283 plunger style pincer clips, AC285 large jaw alligator clips, TP220 industrial sharp test probes, TL224 right to straight silicone insulated test leads, six pocket storage pouch. Order # 105-500 NET 30 Terms

Mfr. # TLK-225

21

•Auto shut–off maximizes battery life•Small body and jaws fit perfectly in your hand and into tight places •Large, backlit display (on most models) is easy to see •In–rush current function (on most models) for measuring starting current for motors, lighting, etc. •Improved low current measurement accuracy from new microprocessor technology •Meter controls are positioned so current measurements can be done with one hand •Handy display hold keeps measurements on the display •Three year warranty

87V/E2 Industrial Electrician Combo Kit

(set) $108.16

425

C53_pg_426-427

section

21

8/14/08

1:13 PM

Page 426

Test Equipment

TL71 Premium DMM Test Lead Set •Flexible silicone insulated leads are heat and cold resistant •Distinctive comfort grip probes •Recommended for µV measurements •CAT III, 1000V, 10A; CAT IV, 600V, 10A •Mfr. #TL71 Order # 105-454

(set) $20.00

Industrial Multimeter and Infrared Thermometer Combo Kit

2mm/4mm Test Lead Set

Save money by purchasing two popular Fluke products in one package! This kit includes the Fluke 179 true RMS multimeter with a built-in thermometer and the Fluke 61 non-contact infrared thermometer. The Fluke 179 features a 1000V true RMS AC and DC range, 0.09% basic accuracy and a large, easy-to-read display with backlight. The Fluke 61 safely measures rotating or energized equipment; features include an 8:1 distance to spot size ratio and a laser pointer to pinpoint measurement target. The kit also includes an 80BK probe, test leads and is packaged in a C800 carrying case.

•2mm threaded probes with removable 4mm banana-style spring contacts •Flexible 1.5M silicone leads •Cat III, 1000V, Cat IV, 600V, 10A

Order # 105-555

Mfr. # Fluke-179/61 Kit

Order # 105-498

Mfr. # TL76

(set) $23.38

TL80A Basic Electronic Test Lead Set •Six piece set with zippered case •Probes, alligator clips, and tip extenders for electronic applications •Cat II, 300V rated •Mfr. #TL80A. Order # 105-456

(set) $52.32

#105-430

#105-438

(kit) $339.95 #105-440

#105-432

Non-Contact AC Voltage Detector and LED Flashlight Combines a bright LED light and pen-style volt detector in one convenient, compact design. Detects voltage from 90V~600VAC from 1'~5' away. With exclusive dual-sensitivity, the voltage detector glows blue when it’s near AC voltage and glows red when it’s at the source. Features: •LED light with 100,000 hour life •Rated to CAT IV 600V •Includes “AAA” battery •Dimensions: 23cm(H) x 14cm(W) x 2.5cm(D) •Mfr. #LVD2 Order # 105-700

(ea.) $30.85

A

21

VoltAlert™ Voltage Testers The next generation VoltAlert™ AC B voltage testers from Fluke are easy to use, just touch the tip to a terminal strip, outlet or cord. When the tip glows red and the unit beeps, you know there’s voltage in the line. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits and defective grounds on the factory floor, in the shop, or at home. Features: •Dual visual and audible indication •Voltbeat™ technology and system self-test to continually test the integrity of the unit and battery for added user protection •CAT IV, 1000V over-voltage category rating •Compact design fits easily into pocket Fig. Order # A 105-640 B 105-635

426

Mfr. # 1LAC-II 1AC-II

Description 20~90VAC 90~1000VAC

(ea.) $25.25 25.25

#105-442

#105-434

#105-436

#105-444

#105-446

#105-448

Deluxe Electronic Test Lead Set •22 piece set with quadfold pouch •Everything for virtually every electronic need including probes, alligator clips, tip extenders, pincers, leads and adaptors •Cat II, 300V Order # 105-496

Mfr. # TL81A

(set) $111.34

Non-Contact AC Voltage Detector and LED Flashlight Combines a bright LED light and volt detection in one convenient, compact design. Exclusive dual-sensitivity voltage detector. Blue light means you’re close. Red light means you’re at the source. Detects voltage from 40V~300VAC. Comes with a versatile clip to secure light to a pocket, hat or even a panel door. Mfr. #LVD1. Order # 105-600

1-800-543-4330 Fax 1-800-765-6960

(ea.) $26.88

SureGrip™ DMM Accessories •Superior gripping surface made from thermoplastic rubber •Improved ergonomics •New design makes clips, hooks, and probes more versatile •All SureGrip™ accessories are rated Cat III 1000V and Cat IV 600V Order # 105-430 105-432 105-434 105-436 105-438 105-440 105-442 105-444 105-446 105-448

Mfr. # AC220 AC280 AC283 AC285 TL221 TL222 TL224 TP220 TL220 TL223

Description Alligator clips Hook clips Pincer clips Alligator clips Silicone test lead extension kit Silicone test leads Silicone test leads Industrial test probes Industrial test lead set Electrical test lead set

(ea.) $27.80 24.45 27.80 16.69 21.12 21.12 21.12 13.34 54.59 54.59

C53_pg_426-427

8/14/08

1:14 PM

Page 427

Test Equipment

section

21

Scopemeter 120 Series

Scopemeter 190 Series: Speed, Performance, and Analysis Power •Dual-input- 200, 100, or 60MHz bandwidth •Up to 2.5GS/s real-time sampling per input •Large, high resolution color or monochrome screen •Connect-and-View™ automatic triggering and a full range of manual trigger modes •Digital persistence for analyzing complex dynamic waveforms like on an analog scope (190C) •Fast display update rate for seeing dynamic behavior instantaneously •Automatic capture and replay of 100 screens •27,500 points per input record length using Scope Record mode •Trend Plot paperless chart recorder for trend analysis up to 22 days •Up to 1000V independently floating isolated inputs •Waveform reference for visual comparisons and automatic pass/fail testing (190C) of Order # Mfr. # Bandwidth Screen (ea.) waveforms •Vpwm function for motor drive and frequency 105-462192B/003 60MHz Monochrome $1561.00 invertor applications •1000 V Cat II and 600 V Cat III 105-464196B/003 100MHz Monochrome 2495.00 safety certified •Five hours rechargeable Ni-MH 105-466199B/003 200MHz Monochrome 2845.00 battery pack 105-345196C/003 100MHz Color 2845.00 105-350199C/003 200MHz Color 3195.00

The compact Scopemeter 120 series is the rugged solution for industrial troubleshooting and installation applications. This truly integrated test tool is an oscilloscope, multimeter and “paperless” recorder in one affordable, easy-to-use instrument. Find fast answers to problems in machinery, instrumentation, control and power systems. Features: •Dual-input 40MHz or 20MHz digital oscilloscope •Two 5,000 count true RMS digital multimeters •A dual-input TrendPlot™ recorder •Connect-and-View trigger simplicity for hands-off operation •Cursors (Fluke 124) •Shielded test leads for oscilloscope, resistance, and continuity measurements •10:1 voltage probe included with Fluke 124 for reduced circuit loading •Up to seven hours battery operation •600V CAT II safety certified •Rugged compact case Order # 105-200 105-468

Mfr. # 123/003 124/003

Bandwidth 20MHz 40MHz

(ea.) $1275.00 1575.00

190 Series and 120 Series Selection Guide Order # Bandwidth Max real time sample rate Max record length (per input) Number of inputs Input sensitivity Independently isolated floating inputs Display & display modes Display Persistence

190C Color ScopeMeter Series Fluke 199C Fluke 196C #105-350 #105-345 200MHz 100MHz 2.5GS/s 1.0GS/s 3000 Points 3000 Points

190B ScopeMeter Series Fluke 196B #105-464 100MHz 1.0GS/s 3000 Points

Fluke 192B #105-462 60MHz 0.5GS/s 3000 Points

2 Scope and 1 DMM (Isolated) 2mV/div.~ 100V/div. •

2 Scope and 1 DMM (Isolated) 2mV/div.~ 100V/div. •

2 Scope and 1 DMM (Isolated) 5mV/div.~ 100 V/div. •

2 Scope and 1 DMM (Isolated) 5mV/div.~ 100V/div. •

2 Scope and 1 DMM (Isolated) 5mV/div.~ 100V/div. •

Color Digital with variable decay • • • • •

Color Digital with variable decay • • • • •

Monochrome On/Off

Monochrome On/Off

• – • – –

Order # 105-470 105-472 105-474 105-476 105-478

Mfr. # SCC 120 SCC 190 C125 C195 PAC91

Fluke 120 Series Fluke 124 Fluke 123 #105-468 #105-200 40MHz 20MHz 25MS/s 25MS/s 512 Points 512 Points (min/max pairs) (min/max pairs) 2 Scope or DMM 2 Scope or DMM 5mV/div.~ 500V/div. –

5mV/div.~ 500V/div. –

Monochrome On/Off

Monochrome –

Monochrome –

• – • – –

• – • – –

• – – – –

• – – – –

• • • • • •

• • • • • •

• • • • • •

• • • • – •

• • • • – With ITP 120 Option

• • • • •

• • • • •

• • • • •

• – • – –

– – • – –

• 10

• 10

• 10

– 20

– 10

1000V CAT II 600V CAT III 7 hr NiMH

600V CAT III *1

1000V CAT II 600V CAT III 4 hr Ni-MH

1000V CAT II 1000V CAT II 600V CAT III 600V CAT III 4 hr Ni-MH 4 hr Ni-MH Adaptor/battery charger included Using optional optically isolated RS-232 adaptor cable PM9080 5000 counts volts, amps, ohms, continuity, diode, temp 3 year on main instrument. 1 year on standard accessories

Description Software, cable, and carrying case package Software, cable, and carrying case package Compact soft case Universal soft carrying case Optical to parallel printer adaptor cable

www.mcmelectronics.com

190 Series

120 Series •

• • • NET 30 Terms

• • •

4 hr NiCd

(ea.) $310.00 435.00 30.00 130.00 235.00

427

21

Envelope mode Frequency spectrum FFT Waveform compare N-Cycle triggering Pass/fail testing Triggering Connect-and-view™ trigger • • Edge, single, free run • • Video • • Video ines • • Pulse width • • External • • Advanced functions Cursors • • Zoom • • Dual input trendplot™ • • ScopeRecord™ mode • • Automatic capture & replay • • last 100 screens Waveform mathematics • • Save set-ups & screens 10 10 Safety, power & warranty Safety (EN61010-1) 1000V CAT II 1000V CAT II 600V CAT III 600V CAT III Battery 4 hr Ni-MH 4 hr Ni-MH Line power PC printer interface True RMS multimeter Warranty *1 Max input voltage 1000V CATII with VPS40 10:1 voltage probe.

Recommended Accessories 190 and 120 Series

Fluke 199B #105-466 200MHz 2.5GS/s 3000 Points

C53_pg_428-429

section

21

8/14/08

1:15 PM

Page 428

Test Equipment L200 Probe Light This small but rugged probe light attaches to any Fluke test probe. Features: •Bright white LED •120 hours of battery life •Uses two 3V watch batteries •Distinctive Fluke yellow

62 Mini Infrared Thermometer Non-contact thermometer is perfect for professionals. Features: •Best accuracy in its class •Backlit display for poorly lit areas •Dual displays shows current and max measurements simultaneously •Protective rubber boot for added durability. Temperature measurement techniques: •Spot measure: Determine the absolute surface temperature of an object •Temperature differential: Compare two spot measurements against each other •Scanning: Detect changes along a wide or continuous region target. Specifications: •Temperature range: -30°~500°C •Distance to spot size: 10:1 •Laser sighting: Single point, offset •Emissivity: Pre-set to 0.95 •Accuracy: ±1% of reading or ±1°C, whichever is greater •Response time: Less than 1⁄2 second •Weight/dimensions: 7 oz., 6" x 4" x 1.5" •Power: 9V alkaline battery •Battery life (alkaline): 10 hrs. with laser and backlight on, 20 hrs. with laser and backlight off •Display hold: 7 seconds. Includes: 9V alkaline battery, operator’s guide, protective boot, storage holster Order # 105-620

(ea.) $99.50

Order # 105-585

105-021 105-033 105-034 105-008

TP80 C10 C12A C25

105-010 C90 105-251 i200 105-275 Tpak 105-390 TL910

21

The all–in–one Microscanner™ Pro is ideal for home networking professionals. This tester verifies and troubleshoots multiple cable types including coax (RG–6 for CATV/CCTV), twisted–pair cable (UTP, STP, SSTP), and other two–wire networks such as speaker wires, security networks, and telephone A cabling. Features: •Tests both coaxial and UTP cabling •Uses B patented TDR technology to ensure accurate length measurements •Measures length (UTP and coaxial cable), including individual pair lengths to the hub •Flashes hub light •Generates four different tones for locating cables hidden in walls, ceilings, or wiring closets •Identifies active networking 10/100 hubs •Checks wire configuration (Wiremap) •Pinpoints opens, shorts, crossed and split pairs •Identifies half or full duplex capability •Enables patch cable testing without couplers or external adaptors •Pocket size and durable •Low battery indication on display Includes: Microscanner™ Pro, wiremap adaptor, coax adaptor (CATV type, “F” connector), 9V alkaline battery, and user guide.

Description Insulation piercing clip Hard Point™ Right angle lead/probe set Electronic test probes Holster for Series 10 Soft case for Series 10 Soft case for 23, 25, 27 and 70 Series Soft case for 21, 23 and 70 Series in a C70 holster 200A AC current clamp ToolPack™ Meter Hanger Profile probes

(ea.) $30.02 16.69 24.45 22.04 22.04 28.63 27.45 112.42 30.64 46.76

Fig. Order # A 105-360 B 105-366 105-362 105-364

428

Description MicroScanner Pro™ Office/room ID kit Carrying case Bare wire adaptor

The MicroScanner™ Pro VDV kit is the essential, all-in-one voice data video verification tool kit. Features: •Tests twisted pair, coax and bare wire •Measures length via TDR •Finds distance to fault •Locates cables behind walls •Match cables to offices •Identifies active network ports and hubs Includes: MicroScanner™ Pro, Intellitone probe, wiremap adaptor (office ID 4), coax adaptor (CATV type, “F” connector), bare wire adaptor, office/room ID kit (1~3 and 5~7), 9V battery, quick reference guide and user CD. Order # 105-545

Order # 105-267

(ea.) $49.59

TLK-220 SureGrip Accessory Set with Meter Carry Case (US version)

MicroScanner™ Pro VDV Kit

MicroScanner Pro™

•Hand crafted leather with rugged snap and heavy-duty stitching •Fits all Fluke meters and test leads

(ea.) $17.24

Digital Multimeter Accessories Order # Mfr. # 105-023 AC89 105-012 TL75

C510 Premium Leather Meter Case

Mfr. # MT-8200-24A

(kit) $599.00

The TLK-220 combines the accessories of Fluke’s TL220 test lead set with an additional alligator clip, then puts all the pieces into a case which can accomodate a large DMM. Includes: AC220 plunger style alligator clips, AC285 large jaw alligator clips, TP220 industrial sharp test probes, TL224 right to straight silicone insulated test leads, zippered vinyl case with moveable divider. Order # 105-505

Mfr. # TLK-220

(set) $108.16

MicroMapper Cable Tester The MicroMapper is a small hand held cable tester which enables network professionals to quickly and easily verify the integrity of ethernet twisted pair cabling. In one quick step, the MicroMapper will test twisted pair cabling for opens, shorts, crossed, reversed, and split pairs. TheMicroMapper also includes a built–in tone generator. Features: •Testing of twisted pair cables for open circuits, shorts, crossed pairs, reversed pairs, and split pairs •Easy to read fault display •Tone generator for tracing installed cables hidden in walls, floors, and ceilings •Shield integrity testing •Special designed remote unit that enables one person testing of installed cables •Small remote unit that slides into master unit for convenient and safe storage •Automatic sleep mode and power switch for decrease power consumption •Low battery LED Includes: MicroMapper and MicroMapper Remote, patch cable, user guide, and carry case. Order # 105-368

(ea.) $129.00

Intellitone™ Toner and Probe Series

A

B

(ea.) $419.00 146.00 20.00 20.00

1-800-543-4330 Fax 1-800-765-6960

The Intellitone series gives you superior vision for locating cables hidden in floors, ceilings, walls and in bundles. Its breakthrough digital technology makes it the first tool to tone and trace safely and effectively on active networks. Features: •Ends cable location confusion, decisively rejects noise and false signals •Locates correct cable bundle •Isolates cable and wiring within a bundle despite cable bleed •Audible, visual signal I.D. simplifies cable location in noisy enviroments •Diagnoses essential cable information with polarity, continuity and talk battery •Identifies and diagnoses POTS with line 1 service and polarity The probe includes: Lanyard, owners CD and quick start guide, 9V battery The toner includes: Coax “F” connector adaptor, RJ-11 and RJ-45 patch cables, test leads with alligator clips, lanyard, owners CD, quick start guide, 9V battery The kit includes: The toner and probe, coax “F” connector adaptor, RJ-11 and RJ-45 patch cables, test leads with alligator clips, lanyard, owners CD and quick start guide and two 9V batteries •Visit www.mcmelectronics.com for complete specifications Fig. A B A+B

Order # 105-370 105-372 105-374

Description Intelliprobe 100 probe Intellitone 100 toner Intellitone 100 toner and probe kit

(ea.) $79.00 79.00 139.00

C53_pg_428-429

8/14/08

1:15 PM

Page 429

LIMITED 1 YEAR WARRANTY

Test Equipment

ML1 Minilyzer® Professional Hand Held Audio Analyzer Features: •Provides a comprehensive set of analysis functions •Measures RMS or peak levels in absolute or relative units •THD+N measurement in dB and % •Frequency measurements •Polarity test function •Common mode measurements (signal balance) •Auto ranging •Auto scaling •Auto nulling •Frequency sweep capabilities with external signals •Selectable HP and A, C weighting •100 x 64 pixel graphical display with backlight •Complements the Minirator® •Balanced XLR and unbalanced RCA input •Headphone output •Frequency range of 5Hz~24KHz •THD measurement bandwidth of 10Hz~20KHz •Level measurements in dBu, dBV, VRMS, V peak •Accuracy ±0.5% from 20Hz~20KHz •Input range from +20dBu~-90dBu •Includes owners manual •Requires three “AA” batteries, not included Order # 72-6758

(ea.) $644.00 LIMITED 1 YEAR WARRANTY

MR1 Professional Multifunctional Audio Generator Features: •Hand held size •Low distortion sine wave from 20Hz~20KHz •Frequency response: ±0.5dB •Sweepable from 20Hz~20KHz with seven selectable speeds •Square wave •White and pink noise •Polarity test signal •Retractable balanced 200ohm XLR output •Unbalanced 200ohm RCA output •Wide level range: -76dBu~6dBu •Large character display •Includes owners manual •Requires two “AA” batteries, not included Order # 72-6654

Tone Plug Sound System Test Generator

(ea.) $236.00

CapAnalyzer 88A Series II

B

A

ZM1 and ZM1P Audio Impedance Meters Powerful compact units measure impedance at 100Hz, 330Hz, 1KHz and 10KHz, providing accurate measurement of a single loudspeaker, an entire distributed system, or individual components such as resistors, capacitors and inductors. 31⁄2 digit LCD display clearly shows system impedance with accuracy of up to 0.1Ω. On 70V distributed systems, it calculates the wattage rating of the entire system. Measurements are taken at audio frequencies, which allows use with impedance matching transformers, switchers and volume controls, providing more accurate readings than with conventional DMMs. The ZM1P has all the features of the ZM1, but adds an overload protection circuit that prevents the meter from being damaged by amplifier output overloads up to 120VAC. The ZM1P also features a tone generator to improve system testing and performance. Banana test leads included. Requires eight “AA” batteries (#292-020), not included. Specifications Test frequencies: 100Hz, 330Hz, 1KHz, 10KHz Voltage ranges: 25V, 50V, 70V, 100V Measurement ranges (ohms): 0~199.9Ω 0~1999Ω 0~19.99KΩ Measurement ranges (watts): 0~19.9W 0~199.9W 0~1999W Accuracy Impedance ± 2% Wattage ± 3% Dimensions 8" (H) x 31⁄4" (W) x 21⁄4" (D) Order # 72-7420 72-7900

Mfr. # ZM1 ZM1P

Figure A B

(ea.) $52.95

Solving problems caused by electrolytic capacitors has never been easier now that you can locate bad capacitors without unsoldering them from the circuit and without spending time troubleshooting. The CapAnalyzer 88A uses a test frequency higher than other testers, automatically discharges the cap under test, checks for DC leakage (DCR), and then checks and displays ESR on a 20 segment bar scale. Both DCR and ESR measurements are made under 50 millivolts so no active devices are turned on. Because it checks DCR first, it will alert you if the capacitor or anything else in the circuit is shorted or leaky before it checks ESR. Microprocessor controlled, the CapAnalyzer 88A has more features and is more accurate than older designs. A three-color chart on the front panel shows typical ESR readings of good and bad capacitors depending on their capacitance. Includes a low capacitance one-handed tweezer test probe for accuracy and ease-of-use. Order # 72-6508

(ea.) $380.00 473.00

LeakSeeker 82B

Perfect for testing mic inputs on mixing consoles, processors, cable snakes and extensions. Compact device is actually the size of a standard XLR-M connector, and is powered by standard 12~48VDC phantom power. When connected to phantom powered input, the red LED lights and the test tone is generated.

Order # 72-7440

LIMITED 3 YEAR WARRANTY

Simply touch LeakSeeker’s probe anywhere on the PC board foil that shows a low resistance and LeakSeeker automatically calibrates itself to the resistance of the defect. Touch a pad in one direction or the other and LeakSeeker will beep higher or lower, and light the LED distance scale to show you if you’re getting closer or future from the defect. LeakSeeker automatically re-calibrates itself so that there is no adjusting required. The solder pad where the beep is highest is the location of the defect! Find slightly leaky components, up to 150ohm! LeakSeeker comes with a special set of gold-plated test clips and probes and a complete manual with a hands-on tutorial.

XLR 1KHz Tone Generator

Specifications Test frequency: Output level: Dimensions:

(ea.) $209.00

Order # 72-6300

1KHz sine wave -48dBm ⁄4" (dia.) x 23⁄4" (L)

3

(ea.) $36.89

www.mcmelectronics.com

(ea.) $209.00

For data sheets and manuals, visit www.mcmelectronics.com NET 30 Terms

429

21

Order # 72-6564

21

LIMITED 3 YEAR WARRANTY

LIMITED 1 YEAR WARRANTY

The Tone Plug is a unique multi-function audio test instrument capable of generating a variety of signals for troubleshooting, analysis and calibration of sound systems and components. Built into a male XLR microphone connector, the Tone Plug requires no batteries. Simply plug into a phantom powered microphone input of a mixer and its ready to go. Features: •11 user selectable functions including: •Five sine wave test tones at 100Hz, 250Hz, 400Hz, 1KHz, and 10KHz •VLF test signal (40/2400Hz) for testing sub-woofers, crossovers, and amplifiers •Short duration multifrequency pulse for adjusting speaker time delays, reverbs and echo units •Amplitude sweep function for adjusting compressors, limiters and setting tape levels •Automatic frequency stepping mode of the five fixed frequencies •Unique sweep tone for tracing wiring in racks and buildings when used with a telephone line tracer •Built-in LED indicator for checking microphone cables and phantom power

section

C53_pg_430-431

section

21

8/14/08

1:16 PM

Page 430

Test Equipment

PROGRESSIVE ELECTRONICS

PROGRESSIVE ELECTRONICS Basic Tone and Probe Kit

PROGRESSIVE ELECTRONICS Classic Tone and Probe Kit Technicians save time when identifying and locating cable pairs or single conductors with this tone test kit. Great for installing or troubleshooting telephone, data, security/alarm, heating and air, audio/visual and electrical systems. The high power tone generator, continuity and voltage tester is equipped with a modular connector for standard phone jacks. Functions include sending tone, verifying lines, indicating line condition, identifying tip and ring, providing “talk” battery and testing continuity. Designed to work with any tone generator, the inductive amplifier will identify and trace wire within a group without damaging the insulation. Features include a volume control with increased sensitivity, recessed terminal ports for hand-set connection, and a recessed ON/OFF button to prevent battery drain. Use the handy carrying case made of tough cordura to take this test kit anywhere. Kit contains: •Tone generator, inductive amplifier and carrying case. Order # Mfr. # Description 72-3080 701K Classic tone and probe kit Also available separately. Order # Mfr. # Description 72-3065 77HP High power tracer 72-3070 200EP Inductive amplifier

For professionals who need fundamental wire identification tools without the extra cost, the 601K Basic Tone and Probe Kit is the answer. Consisting of the 77M Tone Generator and the 200B Inductive Amplifier, this kit can be used on single conductors, twisted pairs, coaxial cables and de-energized electrical wiring. Includes a polyester zipper pouch. •Power requirements: Two 9V batteries (#292-035) not included •Mfr. #601K Order # 72-6572

(kit) $101.10

(kit) $110.96 (ea.) $36.38 69.64

PROGRESSIVE ELECTRONICS Premium Tone and Probe Kit

21

PROGRESSIVE ELECTRONICS CATV Cable Tone Test Set Designed specifically for the CATV industry, the Model 402K will send tone through any passive device along the cable path. Now you can tone through splitters, directional couplers and traps. As a continuity tester, the 402K provides both audible tone and LED display to indicate resistance levels. The unit will even identify the presence of AC or DC voltage on the cable under test. Each kit consists of: One transmitter, one receiver, one male “F” to “F” connector adaptor cable, one male “F” to alligator clip adaptor cable, and a durable woven polyester carrying case. Power requirements: Two 9V batteries (#292-035) not included. Mfr. #402K. (set) $163.98

(kit) $151.76

PROGRESSIVE ELECTRONICS Modular Cable Tester

Order # 72-6573

(kit) $180.55

PROGRESSIVE ELECTRONICS Telephone Test Set An all-weather test set fully featured, engineered to be tough, yet lightweight and comfortable on your shoulder. Features: •Versatile dialing (tone and pulse, built-in ringer with adjustable ring tones, speed dial memory, and last number redial) •Precise hook flash •Microphone mute •Easy-to-use talk and monitor keys •Audible and visual mode indicators •Polarity test in any mode •Low battery indicator •Drop tested to 20' •Digital safe monitor •Automatic ground-start operation •Unique quick-release belt clip •Premium cord set with bed-of-nails and piercing pin clips Order # 72-6975

430

The AdapToner makes it simple to test any configuration of pairs in 8 position modular jacks and plugs. With a built-in tone generator combined with a modular breakout adaptor technicians can now test continuity, polarity, send tone, and even supply talk battery to any pair, in any configuration. Features: •8 position “snag proof” modular plug •8 position jack with protective cover •Tone, continuity, and talk battery supply using alligator clips •Selectable solid/warble tone signal •Quick reference guide with common wiring configurations •Weather resistant design. The AT8K AdapToner Test Kit (shown above) includes: •AT8 AdapToner, 200EP Inductive amplifier and 700C carrying case •Power requirements: Two 9V batteries (#292-035) not included •Mfr. #AT8K Order # 72-6570

When it comes to wire identification kits, the 801K Premium Tone and Probe Kit is top of the line! Containing the 77HP/6A High Power Tone Generator with bent nose piercing clips, increased talk battery supply and higher voltage protection, as well as the 200FP Filter Probe to filter out all that AC hum, the 801K offers all the features professionals are looking for. Includes a high quality cordura case. •Power requirements: Two 9V batteries (#292-035) not included •Mfr. #801K

Order # 72-6574

PROGRESSIVE ELECTRONICS AdapToner Modular Break-Out Tone Generator Test Kit

Mfr. # PE930

1-800-543-4330 Fax 1-800-765-6960

(set) $210.00

Rises above the competition with unique features including built-in tone generator. Features: •Connect any eight position modular plug to the appropriate jack on transmitter and a sweeping tone signal is applied to all pairs, at the other end use an inductive amplifier probe to quickly locate corresponding plug or jack •Connecting the receiver unit with it’s sequencing red and green LEDs provide fast and accurate results •Identifies opens, shorts, reversals, transposed pairs and will alert when connected to an active circuit (without harm) •Tests 258, T568 A&B, 10 Base-T and USOC •Power requirements: One 9V battery (#292-035) not included •Mfr. #468 Order # 72-6238

(ea.) $107.59

PROGRESSIVE ELECTRONICS Wire Finder Provides buried cable tracing at depths to 3' and lengths to 1000'. When tracing wires in walls, the 508S works great on any type of cable including telephone, electrical, HVAC control wire, audio, coaxial, and more. Using the AC outlet adaptor also permits use on energized 120VAC circuits. Finding a J-box that has been covered over with plaster has never been easier. Specifications: •Transmitter frequency: 477.5KHz •Transmitter power: 9V p-p (11mW) •Voltage protection: 240VAC, 500VDC •Battery life: transmitter 35 hours, receiver 20 hours •Power requirements: Two 9V batteries included •Mfr. #508S Order # 72-6575

(ea.) $286.14

C53_pg_430-431

8/14/08

1:17 PM

Page 431

Test Equipment

True RMS Digital Multimeter Ideal for troubleshooting electronics at the bench or on the job site. Features: •1000V/750V DC/AC true RMS •Inductance to 40H, frequency to 40MHz, capacitance to 400µF, logic to 20MHz, resistance to 40MΩ •10,000 count, 0.1% accuracy •Input warning tone when test leads are in wrong jack •10A AC/DC fully safety fused •Continuity beeper •Min/max, average, relative, peak, data hold •Three-year warranty Includes: Test leads with threaded alligator clips, spare fuse, 9V battery (installed), Magne-Grip™ holster with magnetic hanging strap and user’s manual. Visit www.mcmelectronics.com for complete specifications. Mfr. #37XR-A. Order # 202-265

Pocket DMM with Frequency and Capacitance ✔Great for students Shirt-pocket size meter only 3/8" thick and weighing less than 3 oz. Offers full functionality and is fully autoranging with seven different measurement functions with 27 full ranges of measurement. Ideal for facilities and building maintenance, automotive techs, students, homeowners and hobbyists. Features: •4000-count, 33/4 digits auto ranging over sized display •Measures AC and DC voltage to 600V, resistance to 40MΩ, continuity with beeper, capacitance to 3000µF, and frequency to 1MHz, diode test •CAT II 600V/CAT III 300V dual rating, UL and CSA listing •One-year warranty •Visit www.mcmelectronics.com for complete specifications. •Mfr. #PM51A Order # 202-315

(ea.) $28.95

(ea.) $135.95

Non-Contact VoltProbe® Pen Probe Style Digital Multimeter Features: •600VAC and 600VDC ranges •3400 count digital display plus analog bargraph •Improved DC basic accuracy, 0.5% •Resistance to 34M •Continuity beeper •CAT III 300V and CAT II 600V safety rated •Auto power off Includes: Alligator clip, ground test lead, spare probe tip, installed batteries. Visit www.mcmelectronics.com for complete specifications. Mfr. #DM73C. Order # 202-290

(ea.) $51.95

Lights, beeps, shakes, can't miss that voltage with this non-contact voltage detector. Designed for safety and limited troubleshooting without the expense. Fits conveniently in a shirt pocket. Features: •Detect AC voltage 100~600V •Totally insulated, no exposed metal or conductive parts •Check for AC voltages without necessity of disconnecting the electrical system •Test for AC voltage cables, circuit breakers, wall sockets, junction boxes, fuses, etc. •Find and pinpoint breaks in wires •CAT III 600V •Visit www.mcmelectronics.com for complete specifications •Mfr. #VP-600SB Order # 202-335

Digital Light Meter

Component Tester

Portable, easy-to-use, compact sized meter designed for one-hand operation. Features: •Measures wide range of light up to 20,000 fc or lux, front panel switchable •Accurate, high resolution of 0.01 fc/lux •Sensor dome has 45" attached cord •Built-in CIE spectrum curve for accurate human eye response •Peak hold and data hold •Large, 31⁄2 digit display with backlight feature •Meets CE EN61326-1 certification for safety ratings •Includes carrying case, lens cover, batteries and user’s manual •Visit www.mcmelectronics.com for complete specifications •Mfr. LM631A (ea.) $81.95

Order # 202-325

(ea.) $99.95

1000 Amp Digital Clamp-Ons Simple to operate and well-suited for most basic applications. Features: •TRMS (ACD-6 TRMS-PRO only) •AC and DC voltage to 600V •AC current to 1000A •Auto and manual ranging •Relative zero mode •Auto power off •Data hold •Large, easy to read LCD display •Diode test •Audible continuity •Accommodates conductors up to 1.77" (45mm) in diameter •Safety CAT III 600V •Includes: Test leads with set of alligator clips, carrying case, user’s manual •Visit www.mcmelectronics.com for complete specifications. Order # 202-345 202-350

Mfr. # ACD-6 PRO ACD-6 TRMS-PRO

(ea.) $79.95 99.95

www.mcmelectronics.com

21

Compact Precision DMM with AutoTect™ and VolTect™ Great value! The ultimate pocket sized meter, only 3 /8" thick and less than 3 oz. in weight. Offers full functionality: Measures AC and DC voltage to 600V, AC and DC current to 2000µA, resistance to 6MΩ, continuity with beeper, capacitance to 2000µF, frequency to 30KHz, diode test. Features: •VolTect™, a built-in non contact voltage detector for ac voltages •AutoTect™, automatically selects between AC voltage, DC voltage or resistance measurement based on the test point to which the leads are connected •Fully auto ranging, offers nine different measurement functions plus features that are usually found in much more expensive and larger meters •One-year warranty, fully safety rated •Includes a silicone protective holster, deluxe carrying case, attached test leads, battery and manual •Visit www.mcmelectronics.com for complete specifications •Mfr. #PM55A Order # 202-320

(ea.) $52.95

Circuit Breaker with AC Wire Tracer •Identify circuit breaker to electrical socket, trace AC cables in walls, sort AC wires in a bundle •Microprocessor controlled •Coded transmission •Audible and visual indicators •Includes sensitivity adjustment •CAT III 150V rated •Cable tracing length to 500' nominal •Cable tracing depth to 15" nominal •Includes carrying case, 9V battery, manual. Visit www.mcmelectronics.com for complete specifications •Mfr. #ECB50A Order # 202-295

(ea.) $69.69

21

Features: •Sort, match, QC inspect and verify components, check circuits with this full range capacitance and resistance meter •Dual zero adjustments pots to null strays and test leads •Special low ohms range •Oversized, read at-a-glance display •Zero adjust pots for low ohms and capacitance ranges •Low battery indication Includes: Test leads, alligator clips, batteries and manual. Visit www.mcmelectronics.com for complete specifications. Mfr. #CR50A. Order # 202-280

(ea.) $15.95

section

AC Line Splitter •Measures current without splitting AC line cords •Two measurement loops for increased sensitivity, X1 and X10 •Built-in voltage measurement points to check for voltage sags and surges •Rated for 120V, 15A •Can be used with all brands/models of clamp meters •Visit www.mcmelectronics.com for complete specifications Order # 202-300

NET 30 Terms

(ea.) $13.95

431

C53_pg_432-433

section

21

8/14/08

1:18 PM

Page 432

Test Equipment

LanRoamer™ Category 5 Tester/Analyzer By incorporating a new advanced microprocessor, LanRoamer™ provides advanced features like power management, simultaneous multiple fault indications, selectable tone, fully lighted detachable remote, and other features normally costing hundreds of dollars. Tests shielded or unshielded, Cat 5e, Cat 5, Cat 4, or Cat 3 cable. Includes a handy carrying case and extender test cables. Features: •Cable test results displayed on main unit and remote unit in less than 2 seconds after plugging in cable •Auto-on and auto-off when testing cables •Snap together case for easy storage and convenient patch cable testing •Tone generator mode for use with tone tracers, auto-off •Debug mode with from/to and failures for each pair •Tests for shorts, opens, miswires, reversals, and split pairs •Battery low indicator •Weighs only 5.7 oz. Order # Description 72-6890 Tester/Analyzer 72-6892 RJ-45 to cord adaptor

Mfr. # TP500 TP50

(ea.) $81.25 3.53 B

A

Lil’ Buttie™ PRO Telephone Test Set Features: •Small size and light weight •Five number memory •Technical support number programmed into memory dial •LCD display shows: On-hook voltage, number dialed, off-hook current, set-up info, stored numbers, continuous polarity indication, battery condition, caller ID, call waiting/caller ID, caller ID errors •Tone and pulse dialing •Microphone mute •Last number redial (19 digit) •Electronic ringer •Amplified line monitor for volume levels comparable to “off hook” operation •Modular cordset attachment with bed of nails clips •Auto power off eliminates dead batteries •The LB220 and LB220-BT include bed of nails cord set LB35, mini headset LB40, and two-piece belt clip LB60

A

B

Fig. A B

Order # 72-6762 72-8310

-

72-6763

Description LB220 telephone test set LB220-BT telephone test set with protective boot LB40B replacement headset

Lil’ Buttie™ Telephone Test Set

A

Features: •Small size and light weight •Tone and pulse dialing B •Microphone mute •Last number redial (32 digit) •Continuous line polarity indication (talk or monitor) •Electronic ringer •Amplified line monitor for volume levels comparable to “off hook” operation •Modular cordset attachment •Low battery indicator •Battery powered monitor mode with auto power off on dead lines or when disconnected •The LB100, LB110 and LB110-BT all include a mini headset LB40 and metal belt clip

(set) $166.11 172.39 16.50

Fig. A A B

Order # 72-8040 72-6761 72-8305

-

72-6763

Description (set) LB100 with piercing clip set $119.70 LB110 with bed of nails cord set 126.61 LB110-BT with protective boot 132.21 and bed of nails cord set LB40B replacement headset 16.50

Ranger™ DSL-Safe Test Set Test-Um’s most powerful test set, the LB255 incorporates a built-in amplified speaker, and new, advanced features unavailable on other test sets. Choose from the LB255 which includes the nylon pouch, or the LB255-BT which includes the protective boot. Both the LB255 and LB255-BT include a bed of nails cord set LB35 and a mini headset LB40 Features: •DigiView™ DTMF Decode allows you to see the digits as a dial-out is in progress and capture those digits •ADLI™ Auto Dial B Line Identification, inbound and outbound line identification with caller ID testing •Trafixguard™ senses digital lines and identifies under and over voltage conditions. Totally DSL safe. •Insta-Talk™ Amplified speaker with simultaneous intercom capability for talking while testing. Speaker features three volume levels •Enhanced memory dialing, alpha and numeric capability •8 number memory •Tone and pulse dialing •Auto power-off eliminates dead batteries A Fig. Order # A 72-7885 B 72-8300

Mfr. # LB255 LB255-BT

Includes Nylon pouch LB80 Protective boot LB81

(ea.) $252.99 258.69

21

LanRoamer™ Pro The LanRoamer™ Pro is a high–performance length measurement Cat 5 tester. Delivers features found on testers costing twice as much. Features: •Measures cable length as part of cable test and as a stand–alone function •Tests for shorts, opens, miswires, reversals, and split pair errors •Identifies multiple faults clearly without interpretation •Clear wiremapping form displayed on 2–line, 16 character LCD display •Auto–off, auto–on, up to 10 times better battery life than other testers •One–ended testing with pre–test mode for fast results. •Built-in tone generator with selectable tones and pair capability. The TP600 includes: •Remote #1 •12" cable assembly, RJ-45 to alligator clip set TP40 •12" cable assembly, unshielded RJ-45 conectors, two pieces TP56 •Wire configuration sticker •Laminated quick reference card •Pouch PC510. The TP607 kit includes: •TP600 •Remotes #1~8 •12" cable assembly, RJ-45 to alligator clip set TP40 •RJ-45 to coax adaptor, two pieces TP50 •12" cable assembly, unshielded RJ-45 connectors, two pieces TP56 •Wire configuration sticker •Laminated quick reference card •Carrying case PC400 Fig. A B

432

Order # 72-8295 72-6895

Mfr. # TP600 TP607 kit

(ea.) $163.29 273.47

High Sensitivity Tone Tracer This tone tracer sets a new standard for field service professionals. Due to its slim ergonomic design, as well as balanced weighting, this tone tracer is the most comfortable tracer available. Used in conjunction with any audio tone generator, it permits wire and cable identification without having to make direct metallic contact with the conductor. It can be used with either a wearable headset or a standard cell phone set. Quick-change tips make for easier in-field use. Order # 72-6966

Mfr. # TT100

(ea.) $49.18

Tone and Probe Kit A tough cordura kit pouch houses the Tone Tracer (#72-6966) and the Tone Generator (#72-6960) for convenience in the field. A closure flap protects the instruments and has both a belt loop on the back as well as a metal clip ring for multiple mounting options. The kit includes one cord set with alligator clips. Order # 72-6968

1-800-543-4330 Fax 1-800-765-6960

Mfr. # KP100

(kit) $102.97

Tri-Porter™ Network Qualification and Testing Tool Replace six traditional testers with the first triple-play cabling tester, voice/data/video. The ultimate solution with over 50 separate features and capabilities that makes your job of assuring customer’s cabling systems easier than ever. Combines a world-class speakerphone butt set with a full network tester that has active network negotiation capabilities, as well as line testing at 100Mbits. Video/coax tests include a unique tone generation technology that traces signals thru splitters, traps and filters to find the other end of a cable link. Handles a full range of physical wiring tests for the fast, efficient delivery of IP-based voice, data and video services for either the home or small office. Network testing: 10Mb or 100Mb ethernet. Cable types: Shielded or unshielded Cat 3, Cat 5, Cat 5E, Cat 6; Coax; 2-, 4-, 6-pair telephone cabling. Includes carrying case and 20 piece wiremapping set. Mfr. #IVT600. Visit www.mcmelectronics.com for complete specifications. Order # 72-8215

(ea.) $500.00

C53_pg_432-433

8/14/08

1:19 PM

Page 433

Test Equipment

Net-Rite™ Ethernet Cable Tester

Order # 72-8285

Mfr.# TP250

(ea,) $45.96

Features: •Built-in tone generator with two different tones and auto-off feature •Tone generator includes a replaceable round tip •Find cables behind walls and ceilings •Ideal for residential or commercial use •Traces all types of cable: Cat 5/6, telephone, coax •Exceptional signal acquisition sensitivity •Audible tone location indication •Identify cabling without damaging its insulation •Batteries included •Visit www.mcmelectronics.com for complete specifications •Mfr. #TT250 Order # 72-8290

(set) $45.96

Turbo-Tone™ Features: •Extra long distance capability up to 20 miles away •Constant amplitude output for 100% signal strength all the time, no signal decrease as battery discharges •Easily hear signal through walls and enclosures •Multiple tones and power levels for all applications •Unbalanced tone mode for longer distances on CAT 5 cables •Auto-off for battery conservation •Full talk battery and constant polarity check included •Includes adaptor cables and carrying case Order # 72-6962

Mfr. # TG200

(set) $66.60

Includes: •Resi-Tester™ TP300 •Resi-Tracer™ TT300 •Resi-Toner™ TG400 •Resi-Talker™ LB300 •Remote #1 TP309 •Coax Remote Indentifier #1 TP65 •12" cable assembly, RJ45 to alligator clip set TP40 •Cord set with alligator clips TG10 •Alligator clips cord set LB31B •Coax wiremapper set, 20 pieces TP311 •RJ-45 wiremapper set, 20 pieces TP312 •RJ-11 wiremapper set, 20 pieces TP314 •7.5" cable assembly with nofault RJ-12 connectors for RJ-11 and RJ-45 jacks, two pieces TP20 •24" RJ-45 cable assembly with eight alligator clips, two pieces TP68 •Zippered tool case TK200 Order # 72-7895

Mfr. # KP312

(kit) $451.54

Test-Um’s most economical test set for basic telephone system work •Tone and pulse dialing •Microphone mute •Last number redial, 32 digits •Continuous line polarity indication (talk or monitor) •Electronic ringer •Amplified line monitor for volume levels comparable to “off hook” operation •Modular cord set attachment •Low battery indicator •Battery powered monitor mode with auto power off on dead lines or when disconnected •Includes LB31B: 48" cord set, instruction manual Mfr. # LB300

(set) $93.22

Mfr. # TG400

Order # 72-8035

(ea.) $74.12

The Resi-Tester™ is the first identifier and verification tester designed exclusively for all the wiring environments found in home networking and home automation. CATV, telephone systems, audio cable, security/alarm wiring, and network cabling can all be tested and located using the Resi-Tester™ and optional room identifier sets. Multiple input ports and included adaptor cables mean any wire can be attached and tested.

www.mcmelectronics.com

Mfr. # CX200

(ea.) $42.74

Resi-Tracer™ Tone Detector and Cable Finder

The built-in tone generator sends a signal down installed wires, so that they can be traced in the walls and their exact terminus identified. The built-in remote will identify individual outlets including phone, cable or data network. Using the optional multi-identifier sets (#72-7560), the user can verify connections on up to ten coax outlets and eight paired cables simultaneously for wire-mapping the largest jobs easily and efficiently. Description Resi-Tester™ Coax remote identifiers (set of ten)

(ea.) $105.96

This handy tester is designed for CATV and security camera connection and installation. It tests multi-run coax cables terminated with “F” connectors from a central source. It has the ability to put a tone signal on a coax cable, as well as find and identify multiple coax cables connected to a coax splitter. Individually identified test terminators allow you to trace up to four connections at a time from the main cable box. Features: •For CATV and security camera coax connection testing and installation •Finds and identifies multiple coax cables •Includes four color-coded “F” connectors and BNC adaptors •Built-in tone generator Order # 72-7500

Resi-Tester™ displays cabling results using a large easy-to-read LCD with clear concise information showing all the faults connected with the various cable types. It warns of voltage on lines and shows a “pass” or “fail” message after each test.

Mfr. # TP300 TP310

Mfr. # TP350

Coax Mapper

Resi-Tester™

Order # 72-7555 72-7560

Condition: Shows opens, shorts, miswires, split pairs, PASS and FAIL results fast, on a clear, full alpha/numeric LCD display. Location: Supported by the most comprehensive set of wiremapping locators in the world. Up to 20 cable end locations at a time can be identified and tagged. Position: The built-in tone generator is the most flexible and function-packed tone generator you will ever use. Its configurable signal can be generated to find and fix the position on any type of cable, either exposed or hidden, in ceilings or behind walls. Includes: TP309: Resi-Tester™ #1 terminator TP65: Replacement #1 coax remote identifier TP40: 12" cable assembly, RJ-45/alligator clips TP20: 7.5" cable assembly, instruction manual

(ea.) $105.96 27.93 NET 30 Terms

Resi-Tracer combines unique new features for tracing telephone, network, coax and audio cable with special functions for finding and phasing speakers and testing telephone systems. Features: •Traces all types of cable: Cat 5/6, telephone, coax •Audible and visual tone location indication •Senses Speaker Phasing when used with ResiToner™, MCM #72-7550 •Traces coax cable on active systems to eliminate shutdowns •POTS testing with monitor mode and off-hook listening mode. Includes: Round tip TT30 Order # 72-7890

Mfr. # TT300

(ea.) $84.71

433

21

Resi-Talker™ Test Set

Order # 72-7990

Resi-Toner™ This full function tone generator is designed to further test connections on telephone systems and speaker installations. Find your outlets and assure your connections with the Resi-Toner™. Features: •Powers up the installed telephone lines under actual load conditions with a simulated dial tone to check connectivity and proper wiring configurations without a service connection •Full feature tone generator with three different tone sounds and continuity test •Generates a unique tone sequence for testing speaker installations by “popping” speakers-will work with either AC or DC coupled speaker types •Requires 9V battery #293-275 (not included) Order # 72-7550

Deluxe Resi Kit

21

Testifier™ All Cable Tester

Trace-Rite™ Trace and Tone Detector Set

Easy to use and easy on your budget! Features: •No buttons, auto-off, auto-on •Just plug in an ethernet cable to the main unit and remote-it is tested for opens, shorts, split pairs, miswires and reversals •Removable remote enables testing longer cable runs terminated in different areas •Tests up to 1000' •Full LCD display shows all test information clearly •Shows cable faults per TIA568 specifications •Batteries included •Visit www.mcmelectronics.com for complete specifications

section

C53_pg_434-435

section

21

8/14/08

1:19 PM

Page 434

Test Equipment

Wi-Net Window Wireless Tester Designed for installers and owners of wireless networks to identify, clarify and configure all the wireless transmission equipment on a site. Prevents conflicts of internet access over wireless points and gives a clear picture of the range and availability of each wireless access point. Features: •Signal strength shown as both a percentage on the LCD and a light bar up to 100% •Equipment name and channel of transmission identified •Identifies and communicates with IEEE 802.11 wireless access points types b and g •Lists and logs all received wireless transmissions in the area for review with constant scanning •Displays encryption condition on each wireless component •Lists signal as either an access point or an ad-hoc or twin network type •Ping function accesses IP addresses and determines an internet link condition •Negotiates with network DHCP for component identification and IP/MAC addresses •Works on four alkaline or rechargeable batteries (not included) Order # 72-8195

Mfr. # WP150

(ea.) $266.71

LanScaper™ Network Tester As a Physical Layer Network Management Device, LanScaper™ combines the functions of a high-end cable tester and length measurement device with the capability to monitor and correct network problems connected with the physical layer and link conditions of the network. It is a must-have tool for keeping networks performing efficiently. Features: •Identifies port services including ethernet, ISDN, POTS, and token-ring while reporting such crucial information as network speed, capability, and location of other network devices •Pinging function verifies connectivity to network devices and queries PC/NICs •Detects legacy “Phantom Power”, reports current and voltage capability of analog telephone lines, identifies (maps) remotes while cable testing •Comes in a complete kit with adaptor cables, remote identifiers and tone tracing equipment necessary for any network evaluation application.

LanScaper™ Kit The LanScaper™ kit takes Test-Um’s LanScaper Network Tester to the next level. This kit comes complete with everything you need to test, trace and tune your network system. Includes: •LanScaper NT700 •Remotes #1-#8 •Tone Tracer TT100 •12" cable assembly, RJ-45 to alligator clip set, two pieces TP40 •12" cable assembly, unshielded RJ-45 connectors, two pieces TP56 •RJ-45 to “F” connector, two pieces TP50 •7.5" cable assembly with no-fault RJ-12 connectors for RJ-11 and RJ-45 jacks, nine pieces TP20 •Carrying case PC400 Order # 72-7605

Mfr. # NT750

(kit) $430.77

Order # 72-7600

Mfr. # NT700

(ea.) $317.97

LIMITED 1 YEAR WARRANTY

21

HF/VHF SWR Analyzer w/RF Resistance Meter Diagnose a wide range of antenna problems instantly, with one easy-to-use instrument. Rugged unit combines four test instruments in one: An accurate RF signal generator, a high resolution 170MHz frequency counter, RF Resistance Meter and SWR Analyzer. Gives you a complete picture of your antenna’s performance anywhere between 1.8~170MHz, even outside the HAM bands. Set the bandswitch and tune the dial just like a transceiver. SWR and RF resistance are instantly and simultaneously displayed on sideby-side meters. You can find your antennas true resonant frequency, tune the antenna's on your tower and watch SWR change instantly, as you make each adjustment. Tune critical HF mobile antennas in seconds, without subjecting your transceiver to high SWR. Measure your antenna’s 2:1 SWR bandwidth on a single band, or analyze multiband performance over the entire spectrum from 1.8~170MHz. Measure inductance, capacitance, resonant frequency of tuned circuits, transmission line velocity factor/impedance/loss. Test RF chokes, transformers, and baluns. Adjust your tuner for a perfect 1:1 match without creating QRM. Requires 12VDC, operates on eight “AA” batteries. Rugged all metal cabinet measures 4" x 21⁄2" x 63⁄4". Order # 111-2945

434

(ea.) $260.00

Digital Signal Level Meter

Hand Held Signal Level Meter Features: •Measures NTSC signals: CATV CH: 2~136, OffAir: 2~69 •Wide input dynamic range: -28~+55dBmv •Reads visual and aural carrier levels •Direct channel or frequency measurement: For use with other RF signal applications •Group channel selection: For quick system tests just toggle and read only the favorite channels •Audible aural carrier •Auto shut-off time selection •Memory to store data •Charging status LED •16x2 LCD display with backlight. Specifications: •Range: 46~870MHz in 10KHz steps •Level range: -28dBmV~+55dBmV •Max channel scan: 135 channels •Scan range: All frequencies 46~870MHz •Dimensions: 214mm x 94mm x 47mm •Accuracy: ±2.5dB •Input impedance: 75ohm •Scan speed: 30 channels/minute •Memory groups: 12 groups (01~12) 135 channels. Includes: Rechargeable Ni-MH battery with five hours of continuous operation, battery charger, carrying case, barrel connector and owner’s manual. Order # 72-8145

(ea.) $462.00

Features: •Frequency range continuous from 46~860MHz •Programmed channels for CATV CH 2~135 and TV CH 2~78 or 10KHz increment frequency selection •LCD graphic display with back light •Displays audio and video carrier levels •Single channel spectrum mode displays channel flatness, inband and LSB levels •Full spectrum scan mode displays all video carriers •–40dBmv to +60dBmv dynamic range •Direct channel or frequency entry •Self calibrating •±1dB accuracy •FM demodulator provides audio output •Low battery indicator •Autoranging attenuator •Auto power off •Adjustable volume control •Includes rechargeable NiMH batteries, AC charger, carrying case and owners manual •Mfr. #ST5128 Order # 72-6703

Low Current Indicator

Round Analog Panel Meters These meters are especially suited for applications requiring high durability at low cost. Features: •Rugged steel backs •U-clamp flush mounting •Fade proof lithographed metal dials •Glass fronts •Magnet movement •Dimensions: 2" (D) x 1.5" (D) •Accuracy: ± 5% •1 year warranty Order # 72-7047 72-7048

Mfr. # 640 640

Range 0~15VDC 0~50VDC

1-800-543-4330 Fax 1-800-765-6960

(ea.) $22.95 28.95

(ea.) $973.00

Ideal for checking low current applications such as, accessories to electrical system or low voltage leaks. Features: •Induction type requires that the cable be placed in slot frame on the rear of meter case, no electrical connections or leads to hook up •Range: 30~0~30ADC •1 year warranty •Mfr. #763 Order # 72-7043

(ea.) $20.15

C53_pg_434-435

8/14/08

1:20 PM

Page 435

Test Equipment

section

21

LIMITED 1 YEAR WARRANTY

WireMaster RJ-45 •Verifies point-to-point wiring of RJ-45 patch cables •Eight LEDs identify the destination of each conductor in cable •Checks for continuity in straight-through wiring •Cable types: AT&T 258A, EIA/TIA T568A or T-568B, TP-PMD and any RJ-45 cable •One year warranty Order # 74-020

(ea.) $41.00

WireMaster Coax 8-Way Coaxial Cable Mapper •8 remotes with BNC connectors included •Tests for opens and shorts •AC/DC overvoltage warning LED •120VAC line cross protection •Real-time test identifies intermittents •Power latch function switch prevents accidental turn-ons •Identify any pair of wires (shielded or unshielded) such as audio, video and phone lines using appropriate adaptors •Battery self test •Ideal for CCTV security and surveillance systems, broadcast TV, residential video systems, cable TV (with “F” adaptors) •Uses one standard 9V battery, not included •Includes carrying case and BNC male-to-male adaptor •Mfr. #3274 Order # 74-325

(ea.) $39.95

TDR Cable Fault Finder

3

Order # 74-240

(ea.) $199.00

WireMaster XR-2 LAN Cable Test Set With Tracer Tone •Verifies point-to-point wiring of twisted pair LAN cables •Checks for continuity in straightthrough or reverse wiring •Eight LEDs identify the source and destination of each conductor •Direct connection of 8 pin RJ-45 or 6 pin RJ-11 cables •Generates two distinct tones usable for cable tracing •Allows remote testing of cable runs up to 1000' •Telco protected •Long battery life •Carrying case included •One year warranty User selectable features: •RJ-11 four conductor or six conductor •Forward or reverse sequencing on transmitter •High or low pitch tracer tone •Fast or slow LED sequencing Input/output protection: •Will withstand 56V with 400ohm series resistance applied across the outputs •Will withstand 175V peak with 100ohm series impedance superimposed onto 56VDC for 100mS (standard Telco signals) General: •Cable types: RJ-45 8 pin, RJ-11 6 pin conductor, RJ-11 6 pin 4 conductor, straight-through or reverse wiring •Output tone: Approx. 5V peak to peak square wave •Power requirements: 9V alkaline (#292-035) not included •Dimensions: 1" x 23⁄8" x 35⁄8" •Weight: 5 oz. approx. (without battery) •Mfr. #3254 Order # 74-080

(ea.) $93.95 LIMITED 1 YEAR WARRANTY

Model 2030-C Autoranging Pocket-Sized DMM •Hard protective case opens to form stand •33⁄4 digit, 4000 count •AC/DC volts to 600V •AC/DC current to 400mA •Resistance to 40MΩ •Cat II 600V rating on voltage ranges •Capacitance test to 100µF •Frequency range to 10KHz •Duty cycle •Diode check •Continuity beeper •Relative mode •Data/range hold •Auto power off •Low battery indicator Order # 74-280

(ea.) $24.00

You’ll not find a meter with these features at this price. A must for your tool box! Features: •Measures dB loss and gain in cable distribution systems •Verify installation before cable TV service is connected •Transmitter simulates frequency and level of TV channel 3 •Check for: bad cables, bad splitters, bad switches, bad connectors/connections, bad amplifiers/verify amplifier gain, excessive loss in cable (too long) •Visit www.mcmelectronics.com for additional specifications Order # 74-345

(ea.) $169.00

Model 9045 True RMS Autoranging DMM •6000 count display •61 segment bargraph •Blue backlit LCD •DC voltage ranges to 1000V •AC voltage ranges to 750V •AC/DC current ranges to 10A •Resistance ranges from 600Ω~60MΩ •F° and C° selectable temperature test •Capacitance ranges from 40nF~4000µF •Frequency ranges from 9.999Hz~9.999MHz •Duty cycle •Diode test •Continuity test •Safety designed to comply with IEC 1010-1 •CAT III 600V/CAT II 1000V rated •Overload protected •Three year warranty •Includes: Safety test leads with screw-on alligator clips, thermocouple probe and 9V battery Order # 74-340

(ea.) $101.00 LIMITED 3 YEAR WARRANTY

21

This hand–held digital cable length meter /TDR fault locator is designed to both measure the length of copper communication cables and distance to a fault. Identifies opens and short circuits, and directly indicates the fault distance on the alpha–numeric LCD. Meter has an internal library of 39 standard cable types. Incorporates an oscillating tone generator, detectable with a standard tone probe for use in tracing and YEAR LIMITED identifying pairs within a cable. WARRANTY Specifications: •Approximate range: Coaxial cable (6400'), structured wiring (2500'), telephone cable (2500') •Accuracy: ±3% on cables longer than 200', ±5' cables 10'~200', ±2' cables up to 10' •Output impedance: 50, 75, and 100ohm •Velocity of propagation: 0~99% •Connector type: BNC •Safety: IEC61010, EN60950 •Includes padded cordura holster, test lead adaptor w/alligator clip, and 9V battery

CableRater, dB Loss Meter

Model 9005-A DMM Breaker Identifier •Micro-processor controlled reduces false readings •Fully automatic no adjustments necessary •120/220VAC transmitter (250VAC max) •Audible and visual indication •Auto power off battery saver •Uses standard 9V alkaline battery (#293-275) •UL listed Order # 74-260

(ea.) $53.00

www.mcmelectronics.com

Features: •31⁄2 digit, 1999 count •1.15" high digital display •Manual ranging •DC voltage to 1000V •AC voltage to 750V •AC and DC current to 10A •Resistance to 200Mohm •Continuity test •Diode check •Transistor check •Overload protection •IEC 1010-1 CAT I, II and III rated •Data hold •Includes red rubber boot, test leads with screw-on alligator clips and owners manual Order # 74-234 NET 30 Terms

(ea.) $49.00

435

C53_pg_436-437

section

21

8/14/08

1:21 PM

Page 436

Test Equipment Fox and Hound 3 Probe Kit

LIMITED 5 YEAR WARRANTY

Includes original Fox tone generator, Hound 3 probe inductive tracer and cordura carrying case. Mfr. #3397.

Sniff-It 2 Non-Contact, AC Voltage Detector

Order # 74-335

Mini AC Clamp-On Meter Perfect tool for the professional or do-it-yourselfer. Compact size, easily fits in your shirt pocket. Features: •AC current clamp-on •Simple, one button operation •Measures from 0~200A AC in two ranges •Large, 33⁄4 digit, 4000 count display •Autoranging •Data hold •Overload indication (@400A) •Auto power off •Low battery indication Includes: •Two 3V batteries, carrying case and wrist strap •Mfr. #9200

(ea.) $93.95

•Features adjustable sensitivity control from 5~600VAC •Light flashes and beeper chirps when AC voltage is present •Flashes and beeps faster as AC voltage is approached •Pocket sized •Powered by one A23 battery, included •5 year limited warranty •Mfr. #9601 Order # 74-305

Order # 74-315

(ea.) $17.95

Line-Bug 4 Phone/LAN Line Tester

LIMITED 5 YEAR WARRANTY

•Tests standard telephone jacks and LAN jacks for connection to telephone system •Checks LAN lines (RJ-45) wired to 568 A/B standard for damaging telephone line current •Has RJ-11 and RJ-45 style plugs •Four tri-color (red/green/amber) LEDs indicate current, polarity and ringing/AC voltage on each line •Tests single line, 2 line, 3 line, 4 line jacks to USOC (telephone) standard

Sniff-It Non Contact AC Voltage Detector •Detects AC voltage without making contact •Sensitivity from 30~600VAC •Light flashes and beeper chirps when AC voltage is present •Powered by one A23 battery, included •Five year limited warranty •Mfr. #9600 Order # 74-222

(ea.) $11.95

Order # 74-295

(ea.) $8.95

A

(ea.) $26.95 LIMITED 1 YEAR WARRANTY

21

Gale Corporation Pocket Toner 2® PRO

B

Pocket-sized tool for toning, tagging and identifying cables used in CATV, LAN, security, electrical, telco and audio/video installations. Includes RJ-45 adaptors. Features: •Adaptors for 66 Block check, F-RJ-45, F-RJ-11, alligator clips, RCA (male/female), F71, F81 and BNC (male/female) •Bicolored LED lamp-red indicates a short or device in-line, green indicates a 75ohm or 50ohm termination •Main body connector provides a secure connection for the various adaptors •Includes the above adaptors, carrying case, battery and owners manual

436

•For use on 110~125VAC receptacles •Detects common wiring problems in standard and GFCI outlets •To test, simply plug into receptacle and observe the light pattern •Push the yellow button to test operation of ground fault receptacle (ea.) $7.39

Tracker 2700 and 2700S

An essential tool for every CATV technician to confirm continuity and check for short circuits or splitters on coaxial cable. LED light indicates a shortcircuit or splitter in the test line. Audio tone identifies line carrying signal. Features: Works with coaxial cable with replaceable push-on “F” type connector at the top of the sending unit head, ergonomic pocketsized test tool with right-angle head for getting into tight areas, speed-toning threads on toner unit makes testing large cable bundles easy without the need to thread the toner into every cable connector, includes one standard “AAA” battery. Mfr. #PT1-S.

Order # 72-6744

Plug-Bug GFCI Receptacle Tester

Order # 74-300

Gale Corporation Pocket Toner CATV Cable Tester

Order # 72-7565

(ea.) $39.95

(ea.) $86.95

LIMITED 1 YEAR WARRANTY

Fig. A B

Order # 72-6990 72-7905

The Huntron Tracker 2700 extends the capabilities of the popular Tracker 2000 to troubleshoot low voltage logic circuitry. Its low voltage ranges also make it ideal for testing passive devices such as high value capacitors while still in-circuit. Features: •Troubleshoot low voltage circuitry without the possibility of exceeding manufacturers specifications •The Tracker 2700S scans and compares up to 40 pins per channel using standard IC clips and cables; comparison takes place manually or automatically allowing you to pick out the signatures differences quickly •Features Huntron SigAssist™ for display of signature resistance, capacitance, and breakdown voltage •Test gate-fired devices with a built-in DC voltage source •High resolution color LCD for signature and menu display •Individually select source voltage, source resistance, and test frequency to create over 100 range combinations Power requirements: 115VAC~230VAC, 50/60Hz. Dimensions: 11.5" (W) x 4.5" (H) x 10.8" (D). Mfr. # (ea.) 2700 $2673.00 2700S 3599.00

MP10 and MP20 Microprobes Features: •Insulation right down to the needle-sharp stainless steel tips •Durable sharp points to keep the microprobes where you want them •Kynar electrode coating with insulation to protect against accidental shorting •Patented adjustability and slip design to avoid obstructing your view of circuits and components under test •The MP10 has standard banana plug connectors •The MP20 has safety shrouded banana plugs (suitable for use with most DMMs) B A

1-800-543-4330 Fax 1-800-765-6960

Fig. A B

Order # 72-6194 72-7915

Mfr. # MP10 MP20

(ea.) $26.95 26.95

C53_pg_436-437

8/14/08

1:22 PM

Page 437

Test Equipment

Features: •7 sound level ranges: 50~126dB •A and C weighting for sound analyses •Fast/slow response allows intermediate and high level measurements •RCA output jack. Specifications: •Positions: 60, 70, 80, 90, 100, 110, 120dB •Load impedance: 1Kohm min •Distortion: < 2% at 1KHz, 0.5V •Microphone: Electret condenser microphone, omnidirectional, directionality increases at higher frequencies •Precision: ± 2dB at 144dB •Output signal: Max 1V deviation at 1KHz for the entire range •Power supply: One 9V battery, included •Battery test: OK indication between 7 and 10.5V •Battery life: 110 operating hours (alkaline batteries) •Dimensions: 6.3" x 2.4" x 1.7" •Weight: 185g (ea.) $43.80

Features: •31⁄2 digit LCD display •Measurements: DC current up to 10A, AC/DC voltage up to 600V, resistance up to 2MΩ •Backlit display •Diode, transistor, and continuity test with buzzer •Automatic polarity function •Data hold function •Includes protection holster (ea.) $18.95

Pocket Audio Generator Kit Features microprocessor technology and digital waveform generation. Specifications: •Sine wave: 50Hz, 100Hz, 1KHz, 10KHz, 20KHz •Burst: 50Hz, 100Hz, 1KHz •Burst mode: 20ms ON, 500ms OFF •Noise: 32 bit digital pink noise •Output level (10Kohm): 0~775mV (0dB) •Outputs: 2 x RCA (cinch) •Power supply: 2 x CR2016 or CR2025 battery (not included) •Dimensions: 3.4" x 2.0" x 1.0" Order # 80-6655

(1-3 kits) $36.40

(4 kits-up) $33.09

Hand Held Oscilloscope and FREE Tool Bag

FREE

Compact DMM!

Hand Held Oscilloscope and FREE Compact DMM

B

Features: •Switch mode design for high power in a lightweight, compact size •Selectable output voltages of: 3V, 4.5V, 6V, 7.5V, 9V and 12VDC •Current capacity of: 1.5A@ 3~6VDC, 1.2A@ 7.5VDC, 1.0A@ 9VDC, .75A@ 12VDC •9VA maximum output •Short-circuit and overload protection •Power requirements: 100~240VAC, 50/60Hz •Includes 6 selectable output jacks (ea.) $21.33

Fig. A B -

Order # 72-8130 72-8120 72-6512 72-6514 72-6998

Description HPS10 with free DMM HPS10SE with free DMM AC adaptor Oscilloscope probe Leather carry case for HPS10

(ea.) $159.00 193.00 7.09 19.95 18.95

Cable Tracker with Tone Generator Features: •Consists of a tone generator and a probe •Determine where a cable is going and whether or not (and where) the cable is interrupted •Signal viewing in 3 modes: Lamp (L), speaker (SP) or both (S&L) •Tone generator output (square waveform): Single (900Hz) or dual (900~1000Hz) •Includes soft carrying bag. Tone generator specifications: •Working voltage: 9VDC ±15% •Working current: 10mA (intermittent tone)/20mA (continuous tone) •Output wave form: Square wave signals ±10V pp •Single audio frequency: ± 900Hz •Dual audio frequency: ± 900Hz~1000Hz •Dimensions: 4.5" x 2.4" x 1.1" •Weight: 130g. Probe specifications: •Working voltage: 9VDC ±15% •Working current: 25mA (L)/80mA (max SP volume)/100mA (max S&L volume) •Max reception sensitivity: > 30mV •Maximum output volume: ±120dB •Dimensions: 8.1" x 1.6" x 1.5" •Weight: 80g Order # 72-8090

www.mcmelectronics.com

(ea.) $53.60 NET 30 Terms

Treat yourself to a free large tool bag when you purchase Velleman’s user-friendly, feature-packed HPS40 oscilloscope. Features: •Low noise, high sensitivity, modest weight, a backlit LCD, choice between regular batteries or rechargeable ones •Select from five different screen layouts •Fast and fully automatic set-up function •Perform measurements without physically touching the unit •Ideal for the professional user, service center and hobbyist. Specifications: •40MHz sampling rate •12MHz analog bandwidth •0.1mV sensitivity •5mV~20V/div in 12 steps •50ns~1 hour/div time base in 34 steps •Adjustable trigger level •X and Y position signal shift •DVM readout •Audio power calculation (RMS and peak) in 2, 4, 8, 16 and 32ohm. See additional specifications at www.mcmelectronics.com. Includes: •User manual, flexible carry protection holster, insulated safety probe, RS-232 connection lead (to DB-9), rigid carry case. The tool bag, a $25 value, features five compartments and double layers of rugged, lightweight nylon, (tools not included). Dimensions: 15" (L) x 71⁄2" (W) x 12" (H) Order # 72-8125

Description HPS40 and free tool bag

(ea.) $318.00

Digital Humidity and Temperature Meter •Display: LCD with backlight •Sensor type: Humidity: Precision capacitance sensor, temperature: thermistor (head) and type K thermocouple •Measurement range: Humidity: 0%RH~100%RH; temperature: -20°C~60°C (-4°F~140°F) •Accuracy: range 5%~95%RH: ± 3.5%RH (at 23°C ± 5°C); range -20°C~60°C: ± 2.5°C; range 4°F~140°F: ± 3.5°F •Response time: 180ms •Sample rate: 2.5 times/second •Polarity: Automatic, with negative polarity indication •Overload indication: “OL” •Resolution: 0.1%RH, 0.1°C, 0.1°F •Operating conditions: 0~50°C (32~122°F); <80%RH non-condensing •Storage conditions: -10°C~60°C (14~140°F); <80%RH non-condensing •Auto power off: Device shuts down automatically if no key is pressed for 15 min. •Battery: 9V (6LR61) battery, included •Dimensions: 225 x 45 x 34mm •Weight: 200g Order # 72-8085

(ea.) $103.20

437

21

Compact Switching Power Supply

Order # 72-6773

A

Includes

What a deal! Purchase Velleman’s HPS10 or HPS10SE and receive a free compact DMM, a $16.00 value. Both oscilloscopes feature high sensitivity, down to 0.1mV/div, extended scope functions and extreme value for the money making them ideal for hobby, service, automotive and development purposes, and for educational use in schools and colleges. For a step-up, purchase the HPS10SE which features a blue LCD, white backlight and includes a rigid carry case. Specifications for both scopes: •10MHz sampling rate •Up to 2MHz analog bandwidth •5mV~20V/div in 12 steps •200ns~1 hour/div time base in 32 steps •Full auto set-up •Trigger mode: Run, normal, once, roll, slope +/- •X and Y position signal shift •Power supply: Five 1.5V “AA” battery or Nicd/NiMH (not included) •Includes battery charging circuit. Visit www.mcmelectronics.com for additional specifications. The compact DMM features: •Automatic polarity function and 31⁄2 digit LCD display •Measurements: DC current up to 10A, AC and DC voltage up to 600V, resistance up to 2Mohm •Diode, transistor and continuity test with buzzer •Data-hold function and backlight

Compact DMM with Backlit Display

Order # 72-6970

21

Includes FREE Tool Bag!

Analog Sound Level Meter

Order # 72-8095

section

C53_pg_438-439

section

21

8/14/08

1:23 PM

Page 438

Test Equipment Test Lead Wire with Silicone or PVC Insulation

Test Lead Holder

Ten Piece Minigrabber® Test Clip Patch Cord Set

•For most patch cords and cable assemblies •Conveniently holds test leads for instant selection •For cable up to 5⁄16" diameter •Mfr. #4408 Order # 201-028

(1-4) $9.13

•One of each of the following colors: Black, brown, red, orange, yellow, green, blue, violet, gray and white •24" length •20AWG wire •45VAC, 5A rating •Mfr. #5523

(5-up) $8.46

Order # 201-110

DMM Test Lead Kit •Extra durable •48" long silicone wire •10A 1000V RMS •Kit: One black, one red Order # 201-052

(1-4 kits) $13.45

Order # 201-058

(5 kits-up) $23.61

Mfr. # 6723

21

(1-4) $22.39

(5-up) $20.77

(1-4) $33.45

(5-up) $31.03

(1-4 kits) $55.42

(5 kits-up) $51.41

•Alligator clip to alligator clip patch cord •Nickel plated clip •18 gauge wire •PVC insulated •Rated at 5A Mfr. # AL-B-36-0 AL-B-36-2 AL-B-48-0 AL-B-48-2

Color Black Red Black Red

(1-4) (5-up) $18.76 $17.41 18.76 17.41 10.39 9.64 10.39 9.64

•Build your own safety stacking leads with do-it-yourself safety-sheathed 4mm stackable and right angle banana plugs •Simple assembly •Complies to International Safety Standard IEC 1010-2-031 Material: •Contacts: Nickel-plated brass •Insulation: Lucel acetal polymer •Temperature: 14~176°F (-10~+80°C) •Designed for use with Pomona “Do-It-Yourself” test lead wire (silicone or PVC), MCM order #201-124, 201-125, 201-126 and 201-127 Mfr. # 6721-0 6721-2 6729-0 6729-2

Type Stackable Stackable Right angle Right angle

Color Black Red Black Red

(1-4) (5-up) $4.48 $4.16 4.48 4.16 4.03 3.74 4.03 3.74

Replaceable Tip Lead to Stacking Banana Plug Kit

Order # 201-077

Color Black Red Black Red

(5 kits-up) $23.61

•Minigrabber test clip to stackable banana plug •Simplifies circuit connections •36" 20 gauge wire •Rated at 3000W VDC, 5A Color Red Black

(1-4) $5.40 5.40

(5-up) $5.01 5.01

SMD Microtip Test Probe Length 36" 36" 48" 48"

1-800-543-4330 Fax 1-800-765-6960

(1-4 kits) $25.45

Test Clip to Stacking Banana Cords

Order # 201-016 201-015

Alligator Clip Patch Cord

Order # 201-032 201-034 201-033 201-035

Insulation Silicone Silicone PVC PVC

Kit contains two each: Test probe PVC leads, alligator clips, one black and one red, and dog leg micro tips. Mfr. #5325A.

100MHz Oscilloscope Probe Kit

Order # 201-042

Mfr. # 6733-0 6733-2 6734-0 6734-2

Do-It-Yourself 4mm Banana Plugs

Order # 201-128 201-129 201-130 201-131

•Use with any scope up to 100MHz •Flexible cable •Switchable from x1~x10 •Rise time: x1, 35nsec x10, 3nsec •Maximum input V: 600 •Compensation range: 10~60pF •Bandwidth: 1x (15MHz) x10 (100MHz) •Mfr. #4550B

•Test probe has a stainless steel sharp tip with 8/32 threaded base •Alligator clip screws onto probe tip, eliminating accidental test probe and alligator clip separation •Test leads fit all standard DMMs with safety style banana jacks •Silicon insulated 4' (1.2m) test leads with right angle DMM plugs •Comfort-grip textured surface •Wide temperature range of 14°F~212°F (-10°C~+100°C) •Complies to International Safety Standard IEC 1010-2-031 •Includes two screw-on alligator clips

438

Order # 201-078

Description (1-4 sets) Probe Set with Stainless Tips $17.53 Probe Set with Gold Plated Tips 19.98 5pc Replacement Tip Set 18.04

Test Probe with Screw-On Alligator Clips

Order # 201-123

(5 kits-up) $118.22

Set includes one black and one red 48" silicone insulated test leads. Mfr. #5953A.

•Kit contains a pair (black/red) of precision electronic probes •48" lead length •Five piece set of .040" dia. replacement tips (sold separately listed below) •Conforms to IEC1010-2-031, 1000V CAT III Mfr. # 6275 6342 6354

(1-4 kits) $127.45

Extendable Tip Probe to Multimeter Plug

Precision Electronic Probe Sets

Order # 201-119 201-120 201-121

Order # 201-124 201-125 201-126 201-127

Kit contains: •Two each (one black, one red)probe handles, medium alligator clips, minigrabber leads, minipincer leads, slide on IC tips, slide on extended tips, pup jack leads, and two spade lugs all in a nylon pouch

Kit contains two each (one black, one red): Test probe leads on PVC insulated 18AWG wire, slide-on extended tips and alligator clips. Supplied in a reusable plastic case. Mfr. #5672A. (1-4 kits) $25.45

(5 sets-up) $35.90

Deluxe Test Lead Kit for Electronics

(5 kits-up) $12.48

Low Cost Test Lead Kit

Order # 201-079

(1-4 sets) $38.71

•Create test leads, jumper or patch cords for your own specific needs with this do-it-yourself lead wire •50' (15.2m) of unterminated 18AWG test lead wire •Choose from heat-resistant silicone or PVC insulation in either black or red •Very flexible with 65 strands of 36AWG tinned cooper conductor •Wide temperature range of -58°F~302°F (-50°C~150°C) with PVC insulation •Same wire as used with Pomona test leads and patch cords •Designed for use with Pomona “Do-It-Yourself” banana plugs, MCM order #201-128, 201-129, 201-130 and 201-131

(1-4) $5.09 5.09 5.91 5.91

(5-up) $4.72 4.72 5.48 5.48

•Probe for SMD contacts •Flexible curved tip for the hard to reach places Order # 201-060 201-061

Color Black Red

(1-4) $12.64 12.64

(5-up) $11.72 11.72

C53_pg_438-439

8/14/08

1:23 PM

Page 439

Test Equipment Male BNC to BNC cables •Non-molded strain relief connectors •50ohm, RG-58 cable •500V RMS rating Order # 201-097 201-098

Mfr. # 5697-12 5697-72

Length 12" 72"

(1-4) $7.74 11.17

(5-up) $7.17 10.36

Minigrabber Test Clips to BNC Male •Red and black Minigrabber® test clips •Molded end male BNC •50ohm, RG-58C/U cable Order # 201-101 201-102

Mfr. # 5187-C-36 5187-C-48

Length 36" 48"

(1-4) $17.64 18.86

(5-up) $16.36 17.49

•Set screws firmly secures leads •Simplifies cable construction •Stackable plugs are mounted on 3⁄4" centers •Rated at 5000W VDC, 15A

Binding Posts

Order # 201-113 201-114 201-115

Mfr. # 3760-2 3760-0 3760-5

Color Red Black Green

(1-4) $2.85 2.85 2.85

(5-up) $2.64 2.64 2.64

Minigrabber® Test Clips to Dual Banana Plug •Red and black Minigrabber® test clips •Multi–stacking dual banana plug •50ohm, RG-58C/U cable Order # 201-103 201-104

Portable Banana Jacks

Length 36" 48"

(1-4) $15.80 18.04

(5-up) $14.65 16.74

(1-4) $2.95 2.95

(5-up) $2.74 2.74

Order # 201-029 201-030

Color Red Black

Mfr. # 1437-0 1437-2

Price Per Pkg. (1-4) (5-up) $20.19 $18.72 20.19 18.72

Color Black Red

(1-4) $2.54 2.54

(5-up) $2.36 2.36

•Permits BNC male cable to be used with equipment having banana jacks •Stackable banana plugs are mounted on 3⁄4" centers •Rated at 500V RMS •Nominal impedance: 50ohm Order # 201-006

•Alligator clip, nickel plated •Pin jack, gold plated •Accepts .080 diameter of pin •Fits on most standard DMM test probes •Package of ten

Color Red Black

Mfr. # MDP-2 MDP-0

BNC Female to Double Banana Plug

Insulated Alligator Clip to Pin Jack

•Closed entry receptacles for safety •Mounts in 3⁄4" centers on panels up to 3⁄8" thick •One black and one red receptacle •Rated at 2500W VDC, 15A Order # 201-011 201-010

Mfr. # 3786-C-36 3786-C-48

21

Standard Double Banana Plug

Order # 201-004 201-003

•Accepts standard banana plug •Solder type terminal •Complete with insulators and hardware •2500VDC, 15A rating

section

(1-4) $7.03

(5-up) $6.52

Stack Up Banana Plug •Solderless banana plugs firmly holds wire with internal set screw •Rated at 5000W VDC, 15A Order # 201-008 201-007

Color Red Black

(1-4) $1.45 1.45

(5-up) $1.35 1.35

Set Screw Banana Plug •Set screw holds wire up to 18AWG •Insulator will not separate from banana plug Order # Mfr. # 69-038 BU-00245-2 69-037 BU-00245-0

Color Red Black

(1-4) $1.49 1.49

(5-up) $1.39 1.39

General Purpose Clips Insulated Plug-On Test Prod with 8-32 Thread •Mates with all shrouded, unshrouded and retractable 4mm banana plugs •Positive contact up to 1000V is provided by 2mm stainless steel test point •Collar is flat on one side to prevent rolling •8-32 thread for screw-on clips •IEC1010 compliant Order # 69-161 69-160

Mfr. # BU-26106-2 BU-26106-0

Color Red Black

(1-4) $7.29 7.29

(5-up) $6.69 6.69

•Used in automotive applications for electronic testers •Steel (BU-70) or solid copper (BU-70C) •Crimp or screw connection Order # 69-061 69-165

Mfr. # BU-27 BU-27C

(1-4) $0.69 0.99

(5-up) $0.56 0.87

Insulator for BU-27 •Flexible, vinyl insulator has a textured finger grip •Double insulated Order # 69-032 69-031

Mfr. # BU-29-2 BU-29-0

Color Red Black

(1-4) $0.49 0.49

Mfr. # BU-00246-2 BU-00246-0

Color Red Black

(1-4) $1.09 1.09

(5-up) $0.96 0.96

Unshrouded Stackable Banana Plug •Unshrouded 4mm nine-leaf banana plug •Accepts nonshrouded 4mm banana plugs •Wire up to 18AWG can be easily soldered to plug Order # 69-151 69-152

Mfr. # BU-16-0 BU-16-2

Color Black Red

(1-4) $2.09 2.09

(5-up) $1.94 1.94

Order # 69-154

(1-4 sets) $5.49

(5 sets-up) $5.09

(5-up) $0.46 0.47

•Includes two of each: Black, red, yellow, green and white •22AWG wire, 18" long •Tinned copper wire •Jaw opens 5⁄16" max. •Mfr. #BU-00287 Order # 69-156

(1-4 sets) $5.19

(5 sets-up) $4.78

Alligator Steel Clip with Barrel

Mini Alligator Clip

•Barrel construction for banana plug •Small lip for staking, soldering, or crimping the wire in barrel •10A rating •Solid stainless steel (BU-60X) •Solid copper (BU-60C)

•Number 20 wire or smaller can be gripped by full-meshing teeth •Solder or crimp connection •5A rating •Steel (BU-30) or solid copper (BU-30C)

Order # 69-019 69-153 69-170

Mfr. # BU-60 BU-60X BU-60C

(1-4) $0.29 0.69 0.59

(5-up) $0.24 0.64 0.52

Insulator for BU-60, 60S Mfr. # BU-62-2 BU-62-0

Color Red Black

Mfr. # BU-30 BU-30C

(1-4) $0.29 0.39

(5-up) $0.19 0.29

Insulators for BU-30 and BU-70 •Skin tight, flexible vinyl insulator

•Tough, flexible vinyl insulator that covers the entire clip except 1⁄16" of nose Order # 69-022 69-021

Order # 69-018 69-166

(1-4) $0.19 0.19

(5-up) $0.16 0.16

www.mcmelectronics.com

Order # 69-138 69-131 69-136 69-137

NET 30 Terms

Mfr. # BU-32-0 BU-32-2 BU-72-0 BU-72-2

Use for # BU-30 BU-30 BU-70 BU-70

Color Black Red Black Red

(1-4) $0.19 0.19 0.29 0.29

(5-up) $0.14 0.16 0.23 0.23

439

21

Order # 69-016 69-057

•Includes two of each: Black, red, yellow, green and white •22AWG wire, 18" long •Multiple colors simplify identification •Jaw opens 1⁄4" max. •Mfr. #BU-00285

Insulated Alligator Lead Set

Tapered Handle Banana Plug •Through hole design location for wire •Insulator unscrews for access to wire connection •For standard wire up to 18AWG

Insulated Mini-Alligator Lead Set

C53_pg_440-441

section

21

8/14/08

1:24 PM

Page 440

Test Equipment Pen-Style Digital Infrared Thermometer

DCA55 Semiconductor Component Analyzer

Is it hot or cold and how hot/how cold? Be safe and rely on this IR thermometer for quick and easy surface temperature measurements. Thousands of uses. Ideal for HVAC and plant maintenance technicians, electricians, mechanics, health care workers, homemakers, veterinarians, professional chefs and many others. Features: •Temperature range: -27°~428°F/-33°~220°C •Accuracy: ±2% of reading or ±2°C •1:1 optics, distance-to-spot size ratio •Does not use laser beam •Non-contact •Includes two LR44 lithium batteries, provides 180 hours of continuous operation •For complete specifications and a usage guide visit www.mcmelectronics.com .

An intelligent, slim, and invaluable component analyzer that presents the user with detailed component information in concise, easy to read, scrollable pages via its LCD display. The unit negates the need for searching through data books in many cases and is suitable for use with bi-polar transistors, MOSFETS, low power thyristors, and triacs, diodes, and diode networks and LEDs including bi and tricolour ypes. Supplied with battery and universal test clips. Information measured includes: •Component type identification •Special feature identification •Pin out identification •Measured parameters such as gain, gate threshold, voltages, volt drop, etc. •Simple On/Off and scroll controls •Auto power off after 30 seconds •Dimensions: 4" (W) x 2.75" (H) x .78" (D) Order # (ea.) 22-8242 $135.00

Can’t afford a $5000 certifier but need more than your $200 tester offers? The Real World Certifier (RWC) performs sophisticated timing, crosstalk and cable construction tests to display cable category (Cat 5e, Cat 6, etc.), propagation delay, skew, plus all of the normal length, opens, shorts, distance to fault, wire map and other tests that you expect from a tester of this caliber. Installations improve because the RWC spots slightly undercrimped connections, cable coiled in the wall and other maladies that affect cable performance. And for hubs, switches and NIC cards, the RWC displays the device’s signal level(s) and device type (10, 100, 1000Mb/s, half and full duplex). This is useful in determining signal strength at the end of a long cable run. Up to 250 tests can be stored in flash memory and then transferred to your PC’s excel for emailing or printing. Includes the main unit, a toner probe, carrying case and one hour instructional DVD. Compatible with all network devices. Order # Mfr. # (ea.) 72-7920 RWC1000K $613.00

21

Lan Tester Instant answers to a LAN device’s most critical questions: Is it ON? What are its capabilities (10Mb, 100Mb, 1000Mb, half or full duplex)? Perfect for a quick check of your equipment configurations including the negotiated speed between two devices. Or put one in each of your remote offices as a quick troubleshooting tool when the remote cannot connect to the central office. Includes a tone probe for tracing cable and cable testing capability. Compatible with all network devices. A must for every toolbox!

440

Mfr. # TVR/10/100/1000

(ea.) $43.95

Penetrating Test Clip •Multi-purpose angled nose clip provides greater separation when used side-by-side •Opposed “U” jaws grip a variety of cross sections •Stripping of insulation unnecessary •Cluster of hardened needles insure penetration of wire insulation •Two or more wires may be penetrated at once for a temporary splice •Insulation “heals” as needles are withdrawn •Single penetrator pin is also provided for heavier wire insulation •Mfr. #JP-8783

Insulating Boot for JP-8783

Real World Certifier™

Order # 72-8050

Order # DIT-205

(ea.) $209.00

•Integral thumb grip •Tough vinyl insulator •Barrel supports cord, acts as strain relief Order # Mfr. # Color (ea.) 72-6521 JP-8681-BLK Black $0.59 72-6522 JP-8681-RED Red 0.59

Order # 72-6520

(ea.) $4.49

Switchable Oscilloscope Probes Features: •X1, X10 switchable attenuation •1Mohm and 47pF input impedance (X1) •1.2m cable length •600V maximum input voltage •Compensation range 10~35pF •Meets IEC-1010 safety standards for 600V CAT I applications Order # 72-6586 72-6587 72-8060 72-6588 72-8065 72-8070

Mfr. # SP60B SP100B SP150B SP200B SP250B SP300B

Bandwidth 60MHz 100MHz 150MHz 200MHz 250MHz 300MHz

Risetime 5.8ns 3.5ns 2.3ns 1.8ns 1.4ns 1.1ns

(ea.) $34.95 42.95 44.95 49.95 54.95 59.95

440 Scope Plus Combo Kit Save money by purchasing the 440 hand held oscilloscope/DMM combo kit. Includes: •440 scope plus •AC adaptor •Test leads •A403 Boot •Software and cable •Soft zipper carrying case. Order # 72-7875

(kit) $315.00

Combustible Gas Leak Detector Simple to operate with one hand while detecting the presence of combustible gases. Pinpoint leak sources with its audible and visual indicators. Adjustable “tic” rate helps eliminate background gas concentration in contaminated environments. Features: •Instant response •10ppm sensitivity •16" gooseneck •Soft carrying pouch included •Dimensions: 3" x 9.5" x 1.75"

Pocket Size Combustible Gas Leak Detector Detects combustible gases: Methane, butane, propane, gasoline, diesel and kerosene. Four peak levels: 1000, 2000, 4000 and 5000ppm. Features: •Auto zeros •Visible and audible alarm •Instant response •One-hand operation •Pocket clip included Order 72-8075

1-800-543-4330 Fax 1-800-765-6960

(ea.) $59.95

Order 72-8080

(ea.) $149.95

C53_pg_440-441

8/14/08

1:25 PM

Page 441

Test Equipment

Lil Bitty Tester™ Go/no go tester that fits in a shirt pocket. Test capabilities: •Continuity •Detect transistor leakage •Detect DC voltage •Detect polarity of DC voltage •Discrete components Test In or Out of Circuit: •Transistors •FET •SCR •Bipolar light emitting diodes •Incandescent lamps •Triacs •Diodes •Bridge rectifiers •LED •90 day warranty Order # 72-6120

High Impact Case Multimeter

(ea.) $36.31

Noise Plug Pink Noise Generator

1

YEAR LIMITED WARRANTY

The Noise Plug is a complete, precision pink noise generator built into a XLR microphone connector. Simply plug it into a phantom powered microphone input on your mixer and turn up the volume. Features: •20Hz~20KHz precision reference •Accurate 3db per octave rolloff •Balanced microphone level output •Built-in phantom power indicator •Compact design •No batteries required Order # 72-6565

(ea.) $50.45

LIMITED 1 YEAR WARRANTY

Weschler Variable Transformers Panel mounted or portable units provide output voltage that can B be adjusted from 0~117% of the A input. Rugged and reliable auto-transformers are high efficientcy and capable of short term overloads. Output is free of distortion, making them ideal for testing, meter calibration or control of electro-mechanical forces. Portable units include case, power cord, on/off switch, fuse and outlet receptacle. One year manufacturer warranty. UL listed Order # 72-6421 72-6423

Fig. A B

Description 0~132VAC, 2.5A 0~140VAC, 10A

(ea.) $109.00 245.00

The #260-8XI has the same features as the #260-8 plus a drop-resistant ABS case with high-visibility yellow finish and an audible continuity check •The #260-8XPI also has a relay overload protection circuit Order # 72-6213 72-6214

Mfr. # 260-8XI 260-8XPI

Overload Protection No Yes

(ea.) $211.00 254.00

Features: •Nine DC and seven AC voltage ranges •Six DC current ranges •Three resistance ranges •Five decibel ranges Specifications: DC voltage: •Ranges: 250mV, 1V, 2.5V, 10V, 25V, 50V, 250V, 500V, 1000V (20Kohm per volt) •Accuracy: ±2% of full scale AC voltage: •Ranges: 2.5V, 10V, 25V, 50V, 250V, 500V, 1000V (5Kohm per volt) •Accuracy: 3% of full scale Resistance: •Ranges: 0~2Kohm, 200Kohm, 20Mohm •Accuracy: 2.5° of arc on 2Kohm and 2° of arc on greater than 2Kohm DC current: •Ranges: 50µA, 1mA, 10mA, 100mA, 500mA, 10A Accuracy: •+1.5% of full scale on 50µA and 2% on greater than 50µA Decibels: •Ranges: -20~+10, -8~+ 22, 0~30, 6~36, 20~50dB General: •Power requirements: One “AA” (#292-015) and one 9V (#292-035) •Dimensions: 5.5" (W) x 7" (H) x 363⁄64" (D) •Weight: 3 lbs. •Comes complete with test leads, alligator clips, batteries and instruction manual •One year manufacturer warranty •Model 260-8P includes relay overload protection •Model 00043–test leads for model 260-8 Mfr. # 260-8 260-8P

(ea.) $188.00 278.00

Test Leads for #72-6212 and 72-6532 Order # 72-6211

Mfr. # 00043

(ea.) $18.95

Troubleshoot, analyze, optimize, perfect for troubleshooting interference from the following devices: Wi-fi, microwave ovens, cordless phones, Zigbee and Bluetooth. Wi-Spy™ is the world's smallest 2.4GHz spectrum analyzer, and has been designed specifically for troubleshooting and analyzing wi-fi networks using patent pending technology. Wi-Spy™ shows the signal strength for all wi-fi networks as well as bluetooth, 2.4GHz cordless phones, microwaves, zigbee, and all other 2.4GHz transmitters. Perfect solution for those people who deploy and maintain wi-fi networks, have intermittent bandwidth problems with wi-fi or have trouble identifying interference from microwave ovens or cordless phones Includes: •Wi-Spy™ USB adaptor and software package System requirements: PC/Mac with available USB port, CD-ROM for installing or running software Software compatible with: Windows PC running IE 5.01 or higher and Net framework 1.1 or higher or MAC OSX (software must be downloaded from manufacturer) •See www.mcmelectronics.com for full datasheet Order # 72-8185

Specifications DC voltage AC voltage DC current

(ea.) $617.00

Order# 72-7940

Full Range DMM

•Molded plastic case •Shirt pocket size •Auto start •Erases most EPROMs and EPLDs in three minutes •Handles all sizes up to four at a time •Regulated lamp output for uniform erase time •Internal 2~8 minute timer and time out beeper •Mfr. #DATAII-ACT (ea.) $55.00

Digital Pocket Thermometer Features: •Measurement range: -58°F~ +302°F and -50°C~+150°C •Protective probe cover •°C or °F selectable •Temperature hold function •Automatic power off after ten minutes Specifications: •Display resolution: 0.1° between -19.9°~+199.9°, otherwise 1° •Sampling time, 1sec •Battery life, 5,000 hours General: •Power requirements: One LR43 battery included •90 day warranty Order # 72-6541

(ea.) $10.49

LIMITED 90 DAY WARRANTY

UV EPROM Eraser with Timer Four Device

Order # 72-6556

Range Accuracy 200mV, 2000mV, ±(1.5%+2) 20V, 200V, 300V 200V, 300V ±(2.5% +15) 2000µA, ±(2.5% +10) 20mA, 200mA 200Ω, 2000Ω, ±(2.5%+5) 20KΩ, 200KΩ, 2000KΩ 2.7V p-p 9V @ 5mA, 1.5V @ 50mA 1MΩ 35⁄8" (H) x 2" (W) x 1" (D)

(ea.) $19.95

www.mcmelectronics.com

Features: •Transistor check •Diode check •Resistance •DC current •AC/DC voltage •31⁄2 digit display Specifications: DC voltage: •200mV, 2V, 20V, 200V, 1000V AC voltage: •200V, 750V DC current: •200µA, 2000µA, 20mA, 200mA, 10A Resistance: •200ohm, 2Kohm, 20Kohm, 200Kohm, 2MKohm General: •Power requirements: One 9V battery •Dimensions: 3" (W) x 5" (L) x 3⁄4" (H) •Weight: .5 lbs. •Comes complete with test leads and owner’s manual •90 day warranty Order # 72-6343 NET 30 Terms

(ea.) $15.79

441

21

Order # 72-995

(10-up) $167.00

General purpose multimeter is perfect for the toolbox, the work truck or the classroom. It includes all of the most commonly used DMM functions, for a great price. This 1999 count meter measures AC/DC voltage, DC current and resistance. It also test 1.5V and 9V batteries under load and has a 50Hz reference square wave output. With permanently attached test leads, this unit is CATII rated to 300V. Uses one Type A23 12V battery (#291-615), included.

Square wave output Battery load Input impedance Dimensions

Microwave Leak Detector

(1-9) $177.00

Compact Pocket Multimeter

Resistance

•Highly accurate leak detector used to check door gaskets and latches on all brands of microwave ovens •An absolute must for accurate leak detection •FDA approved Features: •Power range: 0~10mW/cm •Accuracy: ±1dB •Response time: 2~3 seconds •Calibrated at 2450MHz •Check feature •Low battery indicator •Overload capacity: Continuous 2000mW/cm •Holaday #HI-1801

21

USB Spectrum Analyzer

General Purpose Multimeter

Order # 72-6212 72-6532

section