·product catalogue·
Introduction Here at Orthomed we make it our top priority to ensure that all our implants and instruments exceed the standard set by the medical ‘gold standard’. We are supported by some of the worlds leading biomedical engineers and material scientists to ensure we achieve this. Having the manufacturing expertise however is just the start; the most important factor in developing new products is you, the surgeon. We have been fortunate to work with some of the world’s leading orthopaedic surgeons over recent years and with their expertise have released a number of clinically and bio-mechanically approved products including our Castless PCA Plate (see page 12) and the novel SOP™ interlocking Plate system (see page 6). We intend to continue this trend and look forward to introducing further products into veterinary use which offer real benefits to both the patient and surgeon. By choosing Orthomed as your dedicated orthopaedic partner you are assured of receiving the highest quality products backed up by a customer service team that is second to none. We trust that you will enjoy using our products and as always, if you have any suggestions, please don’t hesitate to get in touch. I look forward to seeing you in the near future.
Mark Cunliffe
www.orthomed.co.uk
Contents 6 12 16 18 36 42 44 49 50 51 52
www.orthomed.co.uk
SOP Universal Locking Plate System TM
Patent Pending - 0610630.6
Why have we developed the SOP™?
• The SOP™ can be bent in any plane or twisted along its axis.
The use of bone Plates and Screws to repair fractures is well established. Although widely used, conventional Plates have a number of significant limitations. For example:-
• The SOP™ is a locking system providing angular stable fixation of fragments regardless of bone quality, minimising the risk of loss of reduction, even under high dynamic loading and allowing secure fixation even when bone stock is poor.
• Plates can only easily be contoured in a single plane, hence the development of the reconstruction Plate.
• The locking system (patent pending) uses regular bone Screws and provides two points of contact (Screw thread and Screw head) between implant and Screw for optimum stability and security. It also eliminates the need and cost of a separate range of interlocking Screws.
• Conventional bone Plates impair blood flow in healing bone, hence the development of the limited contact dynamic compression Plate. • Bone Plates are particularly weak around Screw Holes, hence the development of shaped implants.
• The footprint of the SOP™ on the bone is extremely small when compared with conventional bone Plates so the impairment of bloodflow will be minimal.
• Conventional Plates depend on friction between the Screw head/Plate and the Plate/bone interface for stability, which is inefficient, hence the development of locking Screw systems.
• The SOP™ system is designed for use in conventional and minimally-invasive fracture surgery.
• Minimally invasive fracture surgery is an attractive concept but existing Plates do not lend themselves to this application.
• The locking system is more ‘surgeon-friendly’ and ‘bone-friendly’ than existing systems.
What makes the SOP™ so unique?
What’s the range of applications?
• The SOP™ is a novel implant system which answers many of the shortcomings of conventional Plates and consequently has a wide range of applications in orthopaedic and spinal surgery.
• Fractures of the femur
• It comprises a series of non-deformable apertures (pearls) connected by short internodes with a circular cross-section; standard bone Screws lock into the pearls.
• Fractures of the tibia
• The pearls are stiffer and stronger than the internodes. They are manufactured to extremely high tolerances to allow the use of standard Screws.
• Pelvic fractures
• The connecting internodes have a circular cross-section which gives the implant a consistent stiffness profile along its length – there are no ‘weak points’ analogous to the Screw Holes in a conventional Plate. • The SOP™ was designed to be stiffer than the 3.5 LC-DCP (Limited Contact Dynamic Compression Plate) and the 3.5 LCP (Locking Compression Plate) - confirmed by mechanical testing performed at Cummings School of Veterinary Medicine at Tufts University, Boston. Data on file.
• Fractures of the humerus
• Fractures of the antebrachium
• Plate – rod constructs • Spinal fractures Cervical Thoraco-lumbar Lumbar Lumbosacral • Surgical spinal distraction-fusion
6
SOP
Customer Service 0845 045 0259
g Lockin System ses which u
l ntiona Convcerews S
1
2
3 3
4
5
6
Image Descriptions: 1.
SOPs™ used to stabilise lumbar vertebrae and the hemipelvis.
2&4. Eleven hole SOP™ used to stabilise entire hemipelvis including ilium, acetabulum and ischium. 3&8. Two SOPs™ used to stabilise a lumbar vertebral fracture. Because the SOP is a locking device, the implants are not compressing any nerve roots etc.
7
www.orthomed.co.uk
5.
SOP™/Rod repair of a femur. The empty holes are not weak points.
6.
The longer SOP™ has been contoured in ‘plan’ and in ‘profile’ to fit the distal femur. The shorter SOP™ demonstrates the ability to ‘stack’ implants in very large patients.
7.
Inter-condylar screw plus two SOP™ proposed repair of complex distal humeral fracture.
8
SOP
7
SOP
TM
3.5mm Universal Locking Plate System
3.5mm SOP™ Implants No.
Code
Product Description
Price
800035003
SOP™ - 3.5mm Interlocking Plate 3 Hole
£26.25
800035004
SOP™ - 3.5mm Interlocking Plate 4 Hole
£35.00
800035005
SOP™ - 3.5mm Interlocking Plate 5 Hole
£43.75
800035006
SOP™ - 3.5mm Interlocking Plate 6 Hole
£52.50
800035007
SOP™ - 3.5mm Interlocking Plate 7 Hole
£61.25
800035008
SOP™ - 3.5mm Interlocking Plate 8 Hole
£70.00
800035009
SOP™ - 3.5mm Interlocking Plate 9 Hole
£78.75
800035010
SOP™ - 3.5mm Interlocking Plate 10 Hole
£87.50
800035011
SOP™ - 3.5mm Interlocking Plate 11 Hole
£96.25
800035012
SOP™ - 3.5mm Interlocking Plate 12 Hole
£105.00
800035013
SOP™ - 3.5mm Interlocking Plate 13 Hole
£113.75
800035014
SOP™ - 3.5mm Interlocking Plate 14 Hole
£122.50
800035015
SOP™ - 3.5mm Interlocking Plate 15 Hole
£131.25
800035016
SOP™ - 3.5mm Interlocking Plate 16 Hole
£140.00
800035018
SOP™ - 3.5mm Interlocking Plate 18 Hole
£157.50
800035020
SOP™ - 3.5mm Interlocking Plate 20 Hole
£175.00
r Visit Oitue Webs tilising ducts u New pro logy o n h c SOP™ te
8
SOP
Customer Service 0845 045 0259
SOP
TM
SOP™ Instrumentation No.
Code
Product Description
1
800010000
SOP™ Case (2.7/3.5mm Systems)
2
800400100
Tray for 3.5mm SOP™ Bending Tees
3
800400035
SOP™ 3.5mm Universal Bending Tool - Left
£172.50
3
800410035
SOP™ 3.5mm Universal Bending Tool - Right
£172.50
4
800202535
SOP™ Double Drill Guide 3.5mm/2.5mm
£125.00
800400103
3.5mm SOP™ Bending Tees (1 Pack of 20)
£40.00
800302535
SOP™ 3.5mm Insert Drill Sleeve (15mm Extension)
5
Price £350.00 £25.00 1
2
TBC
For 3.5mm SOP™
3 1
Standard Instrumentation No.
Code
Product Description
6
900420003
T Handle - Quick Coupling (QC)
7
900425020
Screwdriver 2.5mm Hex (2.7/3.5mm Screws)
900425030
Screwdriver Shaft for QC Handle for 2.7 - 4.0mm Screws
£35.00
900200350
QC 3.5mm Cortical Tap
£30.00
900100025
QC 2.5mm Drill Bit
£25.00
900000025
JC 2.5mm Drill Bit
£23.00
900400274
Depth Gauge 2.7/4.0mm
8
Price £95.00 £130.00
4
5
6
7
£145.00
For 3.5mm SOP™
Need ws? Scre 18 to page Turn
8 1
www.orthomed.co.uk
SOP
9
SOP
TM
2.7mm Universal Locking Plate System
2.7mm SOP™ Implants No.
Code
Product Description
Price
800027003
SOP™ - 2.7mm Interlocking Plate - 3 Hole
£26.25
800027004
SOP™ - 2.7mm Interlocking Plate - 4 Hole
£35.00
800027005
SOP™ - 2.7mm Interlocking Plate - 5 Hole
£43.75
800027006
SOP™ - 2.7mm Interlocking Plate - 6 Hole
£52.50
800027007
SOP™ - 2.7mm Interlocking Plate - 7 Hole
£61.25
800027008
SOP™ - 2.7mm Interlocking Plate - 8 Hole
£70.00
800027009
SOP™ - 2.7mm Interlocking Plate - 9 Hole
£78.75
800027010
SOP™ - 2.7mm Interlocking Plate - 10 Hole
£87.50
800027011
SOP™ - 2.7mm Interlocking Plate - 11 Hole
£96.25
800027012
SOP™ - 2.7mm Interlocking Plate - 12 Hole
£105.00
800027013
SOP™ - 2.7mm Interlocking Plate - 13 Hole
£113.75
800027014
SOP™ - 2.7mm Interlocking Plate - 14 Hole
£122.50
800027015
SOP™ - 2.7mm Interlocking Plate - 15 Hole
£131.25
800027016
SOP™ - 2.7mm Interlocking Plate - 16 Hole
£140.00
g Lockin m Syste uses which
l ntiona Convcerews S
10
SOP
Customer Service 0845 045 0259
SOP
TM
SOP™ Instrumentation No.
Code
Product Description
Price
1
800010000
SOP™ Case (2.7/3.5mm Systems)
2
800400100
Tray for 3.5mm SOP™ Bending Tees
3
800410027
SOP™ - 2.7mm Universal Bending Tool - Right
£172.50
3
800400027
SOP™ - 2.7mm Universal Bending Tool - Left
£172.50
4
800202027
SOP™ - Double Drill Guide 2.7/2.0mm
£125.00
5
800400127
SOP™ 2.7mm Bending Tees (1 Pack of 20)
£350.00 £25.00 1
2
£40.00
For 2.7mm SOP™
3 1
Standard Instrumentation No.
Code
Product Description
6
900420003
T Handle - Quick Coupling (QC)
7
900425020
Screwdriver 2.5mm Hex (2.7/3.5mm Screws)
900425030
Screwdriver Shaft for QC Handle for 2.7 - 4.0mm Screws
£35.00
900200270
QC 2.7mm Cortical Tap
£30.00
900000020
2.0mm Drill Bit (JC)
£18.00
900100020
2.0mm Drill Bit (QC)
£20.00
900400274
Depth Gauge 2.7/4.0mm
8
Price £95.00 £130.00
4
5
6
7
£145.00
For 2.7mm SOP™
Mini SOP™ System
ailability us for av Contact m) m .5 /1 (2.0mm
www.orthomed.co.uk
8 1
SOP
11
Castless Pancarpal Arthrodesis Plates Orthomed are delighted to announce the release of the CastLess Pancarpal Arthrodesis Plate (PCA). The Plate is currently available for 3.5/2.7mm Screws and for 2.7/2.0 Screws.
PCA Rationale Introduction Pan-carpal arthrodesis is an established surgical procedure used to salvage otherwise irreparable injuries of the canine carpus. Traditionally, the surgery has involved removal of articular cartilage prior to placement of an autologous cortico-cancellous bone graft and fixation using a bone Plate applied dorsally to the distal radius, radial carpal bone and the third metacarpal bone. After surgery, it is generally recommended that a cast is applied to provide additional support during the early convalescent period. Although usually successful, pan-carpal arthrodesis is technically demanding and complications, either directly related to surgery or associated with the cast, are not uncommon. Over the years consideration has been given to alternative surgical techniques: external fixators are effective but technically very difficult to apply and a second anaesthetic/surgical procedure is inevitable; a ventrally applied bone Plate is more appropriate biomechanically but significantly more difficult to place; and medially applied a bone Plate has been advocated but this requires considerable additional implant contouring and an undesirably straight arthrodesis. Most surgeons favour a modification of the traditional technique using a modified bone Plate featuring 3.5 mm Screws proximally and 2.7 mm Screws distally for the metacarpal fixation. Design Considerations The incidence of minor complications related to the use of the cast, whilst nowhere documented, is likely to be considerable. Catastrophic cast complications are not unknown. An implant system which avoids the need for post-operative casting is, therefore, desirable. In the normal standing dog, the carpus has 10-15° of extension. However, a review by Whitelock, Dyce and Houlton (1999) indicates that excellent cosmetic and functional results are obtained with an arthrodesis angle of approximately 8°. Achieving an acceptable arthrodesis angle involved bending the Plate over the carpus which will subsequently be exposed to considerable stress. An implant which achieves an arthrodesis angle of approximately 8°
12
PCA
without contouring is, therefore, desirable. The review by Whitelock, Dyce and Houlton (1999) revealed that fracture of Metacarpal III through the most distal Screw was the most common complication causing failure of the arthrodesis. Further, it was shown that Plates covering more than 50% of the metacarpalwere less likely to cause fractures. An implant which covers a large proportion of the metacarpal is, therefore,desirable. Vigueur and colleagues (2001) using cadaver limbs demonstrated that, when loaded incrementally, Plate arthrodesis invariably failed by fracture through Metacarpal III. An implant which attaches distally to two metacarpals is, therefore desirable. Design Features The implants are machined from surgical grade 316LVM stainless steel; batch-marked and manufactured to internationally recognised ASTM standards. Each batch of raw material also undergoes an intercrystalline corrosion test in accordance with ASTM A262. There is a range of three, 3.5/2.7 implants varying in length from 120-140 mm. Proximally there are four Holes designed to accommodate 3.5 mm Screws, two round Holes and two ovals to permit compression of the radius against the radial carpal bone. A single centrally placed round Hole accepts a 3.5 mm Screw to be placed into the radial carpal bone. All three Plates are identical proximally - it is the distal (metacarpal) part of the Plate which varies in length, incrementally by 10 mm. The variation in distal length allows a Plate to be selected which will give maximal coverage of the metacarpal bones. Distally, there are three pairs of Screw Holes designed to accommodate 2.7 mm Screws. The proximal pair of Holes is placed close to midline and Angled at 10°; the middle pair of Holes is slightly more offset and Angled at 30° and the most distal pair of Holes is significantly offset from the midline and Angled at 30°. This arrangement optimises the Screw - bone contact and allows for the anatomical divergence between metacarpals three and four distally. Arthrodesis involving fixation of the implant to two metacarpals, each of which is substantially covered by the implant should minimise the risk of metacarpal fracture. Two small (0.8 mm) Holes perforate the Plate distally. During surgery a small K wire or hypodermic needle can be placed through these Holes and between metacarpals three and four to maintain accurate alignment of the implant.
Customer Service 0845 045 0259
The underside of the implant is contoured. Proximally, a curved under surface is present to conform to the distal radius and the radial carpal bone. Distally, the surface features a “keel” to accommodate the dorsal aspects of metacarpals three and four. Additionally, the implant is shaped to impose an arthrodesis angle of approximately 8° without the need to bend the Plate.
References Whitelock RG, Dyce J, and Houlton JEF. (1999) Metacarpal fractures associated with pancarpal arthrodesis in dogs. Vet Surg 1999 Jan-Feb; 28(1):25-30. Vigueur E, Znaty D, Medelci M, C Degueiearce (2001) Eq VetJ.Suppl. 2001 (33) 32-35.
Method of Application A standard dorsal approach is made to the distal radius, carpus and metacarpus. The tendons of the digital extensors along with neuro-vascular structures are retracted. The dorsal joint capsules are excised from radio carpal, intercarpal and carpal metacarpal joints before articular cartilage is removed from all joint surfaces using a curette or bur. The pancarpal arthrodesis Plate is selected which most completely covers the metacarpals. The carpus is aligned and the implant placed such that Screw Hole 5 directly overlies the radial carpal bone and the distal portion of the Plate lines up over metacarpals III and IV. Small Kirschner wires are placed through the Plate and between metacarpals III and IV to maintain alignment distally. Autologous cortico-cancellous bone graft is collected from the proximal humerus and packed into the joint spaces. After bone grafting, the alignment of the carpus is reviewed and once the carpus is straight, the metacarpals aligned and the proximal portion of the Plate lying comfortably over the distal radius. A 2.5 mm Hole is made into the radial carpal bone through Hole 5. The Plate is secured to the radial carpal bone using a single 3.5 mm bone Screw. Carpal alignment is reviewed then, using the “load” Guide, a pair of 2.7 mm Screws are placed into metacarpals III and IV through Plate Holes 8 and 9. Similarly, using a load Guide and a 2.5 mm Drill, Screws are placed into Plate Holes 1 and 4. The placement of remaining Screws is routine, though care must be taken to respect the angle of the most distal Screw Holes, 10 and 11. Retracted tendons and neurovascular structures are replaced prior to routine wound closure. A light dressing is placed to control postsurgical swelling and the patient is restricted to limited leash exercise until there is radiographic evidence of significant bony union.
11
10
9
8
7
6
5 4 3
2 1
CastLess Pancarpal Arthrodesis Plate
www.orthomed.co.uk
PCA
13
PCA Systems Case Study: X-Rays Patient: 2 year-old Weimaraner
Pre-op: This dog jumped a 3ft wall not realising there was a 15ft drop on the other side. He sustained a fracture-dislocation of metacarpals IV and V and dislocated metacarpals II and III from the carpal joint itself.
Pre-op
Immediately Post-op: The Castless PCA plate was applied to metacarpals III and IV, thereby stabilising the fracture at the same time. A small ‘K’ wire was used to stabilise fractured metacarpal V. An additional screw was used to secure metacarpals II and III back into alignment.
Immediately Post-op
Post-op 7 1 2 weeks: Complete fusion and bony healing. 3 months: Dog returned to full exercise with only mild stiffness reported. 7W 6 months: Dog remains sound.
Post-op
14
PCA
Case Study courtesy of John Ferguson BVM&S CertSAO MRCVS East Neuk Veterinary Surgery
Customer Service 0845 045 0259
PCA Systems
PCA Plates 3.5/2.7mm No.
Code
Product Description
Price
107500110
Castless 3.5/2.7mm Pancarpal Arthrodesis Plate -110mm
NEW
£80.00
107500120
Castless 3.5/2.7mm Pancarpal Arthrodesis Plate -120mm
£80.00
107500130
Castless 3.5/2.7mm Pancarpal Arthrodesis Plate -130mm
£85.00
107500140
Castless 3.5/2.7mm Pancarpal Arthrodesis Plate -140mm
£90.00
t us Contac for
PCA es t Templa
PCA Plates 2.7/2.0mm No.
Code
Product Description
Price
107510060
Castless 2.7/2.0mm Pancarpal Arthrodesis Plate - 60mm
NEW
£75.00
107510070
Castless 2.7/2.0mm Pancarpal Arthrodesis Plate - 70mm
NEW
£75.00
107510075
Castless 2.7/2.0mm Pancarpal Arthrodesis Plate - 75mm
NEW
£80.00
107510080
Castless 2.7/2.0mm Pancarpal Arthrodesis Plate - 80mm
NEW
£85.00
www.orthomed.co.uk
PCA
15
TPLO Plates The combination of skills and expertise developed by our engineers across both medical and veterinary manufacturing, is clearly demonstrated by the development of the Orthomed TPLO Plate.
1. 2.
Benefits include: • • • • • •
Manufacturing Process
100% medically certified implant grade stainless steel. Fully machined, not cast. Decreased profile improving tissue layer closure. Pre-twisting of Plate for simplified contouring. Easily achieved compression. Lot number and item tracking – as with all Orthomed products.
3. 4. 5. 6. 7.
8. 9.
1
5
16
2
6
TPLO
The TPLO Plates begin life as large sheets of 316 medical grade stainless steel. We use an industrial LASER to cut out the TPLO blanks. We then de-burr the Plate ready for the milling process. The round and compression Screw Holes are milled. The Plate is de-burred after the milling process. The Plate is pressed into shape. The TPLO Plate is then manually polished. This is a highly skilled procedure as in the wrong hands it is very easy to “polish in” magnetism. This is the last thing that we require in a stainless steel implant. The second polishing stage involves the Plate being placed within thousands of tiny vibrating ceramic pieces. The Plate is finally electropolished, laser marked and then packaged for use.
3
7
4
8
9
Customer Service 0845 045 0259
TPLO Plates
Now le ilaallbsizes Avre-a bent in P
Pre-Bent TPLO Plates No. 1
Code 107401004
Product Description 2.7mm Pre-Bent TPLO Plate - Left
Price £45.00
1
107401005
2.7mm Pre-Bent TPLO Plate - Right
£45.00
1
107401008
3.5mm Pre-Bent TPLO Plate - Left
£52.50
1
107401009
3.5mm Pre-Bent TPLO Plate - Right
£52.50
1
107401006
3.5mm Pre-Bent Broad TPLO Plate - Left
£70.00
1
107401007
3.5mm Pre-Bent Broad TPLO Plate - Right
£70.00
Standard Plates No.
Code
Product Description
Price
2
107401012
2.7mm TPLO Plate - Left
£45.00
2
107401013
2.7mm TPLO Plate - Right
£45.00
2
107401011
3.5mm TPLO Plate - Left
£52.50
2
107401010
3.5mm TPLO Plate - Right
£52.50
2
107401015
3.5mm Broad TPLO Plate - Left
£70.00
2
107401014
3.5mm Broad TPLO Plate - Right
£70.00
1
2
www.orthomed.co.uk
TPLO
17
Internal Fixation Orthomed’s comprehensive range of implant’s and instruments are all manufactured to the highest standards in state of the art facilities. We adhere strictly to the relevant ASTM and ISO standards for stainless steel surgical implants. All raw material is provided by the worlds leading producers of medical grade stainless steel. Material conformation certification is provided along with each batch to guarantee its biomechanical, chemical and metallurgical characteristics. From a surgeon point of view this means that you can be assured that every time you order a product from Orthomed you are receiving the best quality implant or instrument available. We find that all our customers are interested in the manufacturing process and as such we have included some images of the key stages in our cortical Screw production. If you require any further information on any aspect regarding our products please don’t hesitate to get in touch.
18
Internal Fixation
Customer Service 0845 045 0259
Screw Process 1. 2. 3. 4. 5. 6. 7.
All of our bone screws begin as a bar of 316 medical grade stainless steel. We turn the bar to produce the major dimensions (and in this case the self tapping part is also milled). The hexagon slot is milled into the screw head. The de-burring process removes all sharp edges. The 1st polishing process is applied (prior to the threads being turned). After the threads have been turned the screw is now ready for final cleaning and polishing. Electropolishing finishes the process. The screws will now be laser marked to identify their origin and packaged.
1
2
3
4
5
6
7
www.orthomed.co.uk
Internal Fixation
19
Internal Fixation
1.5 mm Plate and Screw Systems
1.5mm
1.5mm Cortical Screw Self Tapping No.
20
Code
Product Description
Price
930515006
1.5mm Cortical Screw S/T 6mm
£4.25
930515007
1.5mm Cortical Screw S/T 7mm
£4.25
930515008
1.5mm Cortical Screw S/T 8mm
£4.25
930515009
1.5mm Cortical Screw S/T 9mm
£4.25
930515010
1.5mm Cortical Screw S/T 10mm
£4.50
930515011
1.5mm Cortical Screw S/T 11mm
£4.50
930515012
1.5mm Cortical Screw S/T 12mm
£4.50
930515013
1.5mm Cortical Screw S/T 13mm
£4.50
930515014
1.5mm Cortical Screw S/T 14mm
£5.25
930515016
1.5mm Cortical Screw S/T 16mm
£5.25
930515018
1.5mm Cortical Screw S/T 18mm
£5.75
930515020
1.5mm Cortical Screw S/T 20mm
£5.75
930515022
1.5mm Cortical Screw S/T 22mm
£5.75
930515024
1.5mm Cortical Screw S/T 24mm
£6.00
Internal Fixation
Customer Service 0845 045 0259
Internal Fixation 1.5mm Standard Cortical Screws No.
Code
Product Description
Price
930215006
1.5mm Standard Cortical Screw 6mm
£3.90
930215007
1.5mm Standard Cortical Screw 7mm
£3.90
930215008
1.5mm Standard Cortical Screw 8mm
£3.90
930215009
1.5mm Standard Cortical Screw 9mm
£3.90
930215010
1.5mm Standard Cortical Screw 10mm
£4.10
930215011
1.5mm Standard Cortical Screw 11mm
£4.10
930215012
1.5mm Standard Cortical Screw 12mm
£4.10
930215013
1.5mm Standard Cortical Screw 13mm
£4.10
930215014
1.5mm Standard Cortical Screw 14mm
£4.80
930215016
1.5mm Standard Cortical Screw 16mm
£4.80
930215018
1.5mm Standard Cortical Screw 18mm
£4.80
930215020
1.5mm Standard Cortical Screw 20mm
£5.20
930215022
1.5mm Standard Cortical Screw 22mm
£5.20
1.5mm Straight Plates No.
Code
Product Description
934104003
1.5mm Straight Plate 3 Hole
Price £13.00
934104004
1.5mm Straight Plate 4 Hole
£14.00
934104005
1.5mm Straight Plate 5 Hole
£15.00
934104006
1.5mm Straight Plate 6 Hole
£16.00
935915020
1.5mm Straight Plate 20 Hole Cuttable
£45.00
www.orthomed.co.uk
Internal Fixation
21
Internal Fixation
2.0mm Plate and Screw Systems
2.0mm
2.0mm Cortical Screws Self Tapping No.
Code
Product Description
Price
930520006
2.0mm Cortical Screw S/T 6mm
£4.25
930520008
2.0mm Cortical Screw S/T 8mm
£4.25
930520010
2.0mm Cortical Screw S/T 10mm
£4.25
930520012
2.0mm Cortical Screw S/T 12mm
£4.50
930520014
2.0mm Cortical Screw S/T 14mm
£5.25
930520016
2.0mm Cortical Screw S/T 16mm
£5.25
930520018
2.0mm Cortical Screw S/T 18mm
£5.25
930520020
2.0mm Cortical Screw S/T 20mm
£5.75
930520022
2.0mm Cortical Screw S/T 22mm
£5.75
930520024
2.0mm Cortical Screw S/T 24mm
£6.25
930520026
2.0mm Cortical Screw S/T 26mm
£6.25
930520028
2.0mm Cortical Screw S/T 28mm
£6.75
930520030
2.0mm Cortical Screw S/T 30mm
£6.75
930520032
2.0mm Cortical Screw S/T 32mm
£6.75
930520034
2.0mm Cortical Screw S/T 34mm
£7.00
930520036
2.0mm Cortical Screw S/T 36mm
£7.00
930520038
2.0mm Cortical Screw S/T 38mm
£7.50
930520040
2.0mm Cortical Screw S/T 40mm
£7.50
2.0mm Standard Cortical Screws No.
22
Code
Product Description
Price
930220006
2mm Standard Cortical Screw 6mm
£3.90
930220008
2mm Standard Cortical Screw 8mm
£3.90
930220010
2mm Standard Cortical Screw 10mm
£3.90
930220012
2mm Standard Cortical Screw 12mm
£4.10
930220014
2mm Standard Cortical Screw 14mm
£4.80
930220016
2mm Standard Cortical Screw 16mm
£4.80
930220018
2mm Standard Cortical Screw 18mm
£4.80
930220020
2mm Standard Cortical Screw 20mm
£5.20
930220022
2mm Standard Cortical Screw 22mm
£5.20
930220024
2mm Standard Cortical Screw 24mm
£5.70
930220026
2mm Standard Cortical Screw 26mm
£5.70
930220028
2mm Standard Cortical Screw 28mm
£6.10
930220030
2mm Standard Cortical Screw 30mm
£6.10
930220032
2mm Standard Cortical Screw 32mm
£6.10
930220034
2mm Standard Cortical Screw 34mm
£6.30
Internal Fixation
Customer Service 0845 045 0259
Internal Fixation 2.0mm Straight Plates No.
Code
Product Description
Price
934105003
2.0mm Straight Bone Plate 3 Hole
£11.50
934105004
2.0mm Straight Bone Plate 4 Hole
£13.00
934105005
2.0mm Straight Bone Plate 5 Hole
£15.00
934105006
2.0mm Straight Bone Plate 6 Hole
£17.00
934105007
2.0mm Straight Bone Plate 7 Hole
£19.00
934105008
2.0mm Straight Bone Plate 8 Hole
£21.00
935920020
2.0mm Straight Bone Plate 20 Hole Cuttable
£45.00
2.0mm Limited Contact Straight Plates No.
Code
Product Description
Price
934206004
2.0mm LC Straight Plate 4 Holes
£16.00
934206005
2.0mm LC Straight Plate 5 Hole
£18.00
934206006
2.0mm LC Straight Plate 6 Hole
£21.00
934206007
2.0mm LC Straight Plate 7 Hole
£23.00
934206008
2.0mm LC Straight Plate 8 Hole
£25.00
934206020
2.0mm LC Straight Plate Cuttable
£54.00
2.0mm Acetabular Plate No.
Code
Product Description
107401151
Acetabular Plate 2.0mm (6 Hole)
Price £40.00
1
www.orthomed.co.uk
Internal Fixation 23
Internal Fixation
2.7mm Plate and Screw Systems
2.7mm
2.7mm Cortical Screws Self Tapping No.
Code
Product Description
Price
930527006
2.7mm Cortical Screw S/T 6mm
£4.00
930527008
2.7mm Cortical Screw S/T 8mm
£4.00
930527010
2.7mm Cortical Screw S/T 10mm
£4.00
930527012
2.7mm Cortical Screw S/T 12mm
£4.00
930527014
2.7mm Cortical Screw S/T 14mm
£4.00
930527016
2.7mm Cortical Screw S/T 16mm
£4.00
930527018
2.7mm Cortical Screw S/T 18mm
£4.50
930527020
2.7mm Cortical Screw S/T 20mm
£4.50
930527022
2.7mm Cortical Screw S/T 22mm
£4.50
930527024
2.7mm Cortical Screw S/T 24mm
£4.50
930527026
2.7mm Cortical Screw S/T 26mm
£4.50
930527028
2.7mm Cortical Screw S/T 28mm
£4.50
930527030
2.7mm Cortical Screw S/T 30mm
£4.50
930527032
2.7mm Cortical Screw S/T 32mm
£5.00
930527034
2.7mm Cortical Screw S/T 34mm
£5.00
930527036
2.7mm Cortical Screw S/T 36mm
£5.00
930527038
2.7mm Cortical Screw S/T 38mm
£5.00
930527040
2.7mm Cortical Screw S/T 40mm
£5.00
2.7mm Standard Cortical Screws No.
24
Code
Product Description
Price
930227006
2.7mm Standard Cortical Screw 6mm
£3.60
930227008
2.7mm Standard Cortical Screw 8mm
£3.60
930227010
2.7mm Standard Cortical Screw 10mm
£3.60
930227012
2.7mm Standard Cortical Screw 12mm
£3.60
930227014
2.7mm Standard Cortical Screw 14mm
£3.60
930227016
2.7mm Standard Cortical Screw 16mm
£3.60
930227018
2.7mm Standard Cortical Screw 18mm
£4.10
930227020
2.7mm Standard Cortical Screw 20mm
£4.10
930227022
2.7mm Standard Cortical Screw 22mm
£4.10
930227024
2.7mm Standard Cortical Screw 24mm
£4.10
930227026
2.7mm Standard Cortical Screw 26mm
£4.10
930227028
2.7mm Standard Cortical Screw 28mm
£4.10
930227030
2.7mm Standard Cortical Screw 30mm
£4.10
930227032
2.7mm Standard Cortical Screw 32mm
£4.50
930227034
2.7mm Standard Cortical Screw 34mm
£4.50
930227036
2.7mm Standard Cortical Screw 36mm
£4.50
930227038
2.7mm Standard Cortical Screw 38mm
£4.50
930227040
2.7mm Standard Cortical Screw 40mm
£4.50
Internal Fixation
Customer Service 0845 045 0259
Internal Fixation 2.7mm Self Compression Plates No.
Code
Product Description
Price
934108002
2.7mm SCP Plate 2 Hole
£22.00
934108004
2.7mm SCP Plate 4 Hole
£24.00
934108005
2.7mm SCP Plate 5 Hole
£28.00
934108006
2.7mm SCP Plate 6 Hole
£30.00
934108007
2.7mm SCP Plate 7 Hole
£32.00
934108008
2.7mm SCP Plate 8 Hole
£34.00
934108009
2.7mm SCP Plate 9 Hole
£38.00
934108010
2.7mm SCP Plate 10 Hole
£40.00
934108011
2.7mm SCP Plate 11 Hole
£45.00
934108012
2.7mm SCP Plate 12 Hole
£45.00
2.7mm Limited Contact Self Compression Plates No.
Code
Product Description
Price
934208002
2.7mm Small SCP LC Plate 2 Hole
£26.00
934208003
2.7mm Small SCP LC Plate 3 Hole
£28.00
934208004
2.7mm Small SCP LC Plate 4 Hole
£29.00
934208005
2.7mm Small SCP LC Plate 5 Hole
£34.00
934208006
2.7mm Small SCP LC Plate 6 Hole
£36.00
934208007
2.7mm Small SCP LC Plate 7 Hole
£38.00
934208008
2.7mm Small SCP LC Plate 8 Hole
£41.00
934208009
2.7mm Small SCP LC Plate 9 Hole
£46.00
934208010
2.7mm Small SCP LC Plate 10 Hole
£48.00
934208011
2.7mm Small SCP LC Plate 11 Hole
£54.00
934208012
2.7mm Small SCP LC Plate 12 Hole
£54.00
2.7mm Acetabular Plate No.
Code
Product Description
107401150
Acetabular Plate 2.7mm (6 Hole)
Price £40.00
1
www.orthomed.co.uk
Internal Fixation
25
Internal Fixation
3.5mm Plate and Screw Systems
3.5mm
3.5mm Cortical Screws Self Tapping No.
26
Code
Product Description
Price
930535010
3.5mm Cortical Screw S/T 10mm
£4.50
930535012
3,5mm Cortical Screw S/T 12mm
£4.50
930535014
3.5mm Cortical Screw S/T 14mm
£4.50
930535016
3.5mm Cortical Screw S/T 16mm
£4.50
930535018
3.5mm Cortical Screw S/T 18mm
£5.00
930535020
3.5mm Cortical Screw S/T 20mm
£5.00
930535022
3.5mm Cortical Screw S/T 22mm
£5.00
930535024
3.5mm Cortical Screw S/T 24mm
£5.00
930535026
3.5mm Cortical Screw S/T 26mm
£5.50
930535028
3.5mm Cortical Screw S/T 28mm
£5.50
930535030
3.5mm Cortical Screw S/T 30mm
£5.50
930535032
3.5mm Cortical Screw S/T 32mm
£6.00
930535034
3.5mm Cortical Screw S/T 34mm
£6.00
930535036
3.5mm Cortical Screw S/T 36mm
£6.00
930535038
3.5mm Cortical Screw S/T 38mm
£6.00
930535040
3.5mm Cortical Screw S/T 40mm
£6.00
930535042
3.5mm Cortical Screw S/T 42mm
£6.50
930535044
3.5mm Cortical Screw S/T 44mm
£6.50
930535045
3.5mm Cortical Screw S/T 45mm
£7.00
930535046
3.5mm Cortical Screw S/T 46mm
£7.00
930535048
3.5mm Cortical Screw S/T 48mm
£7.00
930535050
3.5mm Cortical Screw S/T 50mm
£7.00
930535055
3.5mm Cortical Screw S/T 55mm
£8.00
930535060
3.5mm Cortical Screw S/T 60mm
£8.00
Internal Fixation
Customer Service 0845 045 0259
Internal Fixation 3.5mm Standard Cortical Screws No.
Code
Product Description
Price
930235010
3.5mm Standard Cortical Screw 10mm
£4.10
930235012
3.5mm Standard Cortical Screw 12mm
£4.10
930235014
3.5mm Standard Cortical Screw 14mm
£4.10
930235016
3.5mm Standard Cortical Screw 16mm
£4.10
930235018
3.5mm Standard Cortical Screw 18mm
£4.50
930235020
3.5mm Standard Cortical Screw 20mm
£4.50
930235022
3.5mm Standard Cortical Screw 22mm
£4.50
930235024
3.5mm Standard Cortical Screw 24mm
£4.50
930235026
3.5mm Standard Cortical Screw 26mm
£5.00
930235028
3.5mm Standard Cortical Screw 28mm
£5.00
930235030
3.5mm Standard Cortical Screw 30mm
£5.00
930235032
3.5mm Standard Cortical Screw 32mm
£5.40
930235034
3.5mm Standard Cortical Screw 34mm
£5.40
930235036
3.5mm Standard Cortical Screw 36mm
£5.40
930235038
3.5mm Standard Cortical Screw 38mm
£5.40
930235040
3.5mm Standard Cortical Screw 40mm
£5.40
930235045
3.5mm Standard Cortical Screw 45mm
£6.30
930235050
3.5mm Standard Cortical Screw 50mm
£6.30
930235055
3.5mm Standard Cortical Screw 55mm
£7.20
930235060
3.5mm Standard Cortical Screw 60mm
£7.20
3.5mm Self Compression Plates No.
Code
Product Description
934110002
3.5mm SCP Plate 2 Hole
£22.00
934110003
3.5mm SCP Plate 3 Hole
£23.00
934110004
3.5mm SCP Plate 4 Hole
£24.00
934110005
3.5mm SCP Plate 5 Hole
£25.00
934110006
3.5mm SCP Plate 6 Hole
£26.00
934110007
3.5mm SCP Plate 7 Hole
£28.00
934110008
3.5mm SCP Plate 8 Hole
£30.00
934110009
3.5mm SCP Plate 9 Hole
£32.00
934110010
3.5mm SCP Plate 10 Hole
£34.00
934110011
3.5mm SCP Plate 11 Hole
£36.00
934110012
3.5mm SCP Plate 12 Hole
£40.00
934110013
3.5mm SCP Plate 13 Hole
£45.00
934110014
3.5mm SCP Plate 14 Hole
£50.00
www.orthomed.co.uk
Price
Internal Fixation
27
Internal Fixation 3.5mm Broad Self Comression Plates No.
Code
Product Description
134070000
3.5mm Broad SCP Plate 7 Hole
Price £50.00
134080000
3.5mm Broad SCP Plate 8 Hole
£50.00
134090000
3.5mm Broad SCP Plate 9 Hole
£55.00
134100000
3.5mm Broad SCP Plate 10 Hole
£60.00
134110000
3.5mm Broad SCP Plate 11 Hole
£65.00
134120000
3.5mm Broad SCP Plate 12 Hole
£70.00
134130000
3.5mm Broad SCP Plate 13 Hole
£80.00
134140000
3.5mm Broad SCP Plate 14 Hole
£80.00
134150000
3.5mm Broad SCP Plate 16 Hole
£90.00
134160000
3.5mm Broad SCP Plate 18 Hole
£100.00
134170000
3.5mm Broad SCP Plate 20 Hole
£120.00
134180000
3.5mm Broad SCP Plate 22 Hole
£140.00
3.5mm Limited Contact Self Compression Plates No.
Code
Product Description
Price
934210004
3.5mm Small SCP LC Plate 4 Hole
£29.00
934210005
3.5mm Small SCP LC Plate 5 Hole
£30.00
934210006
3.5mm Small SCP LC Plate 6 Hole
£31.00
934210007
3.5mm Small SCP LC Plate 7 Hole
£34.00
934210008
3.5mm Small SCP LC Plate 8 Hole
£36.00
934210009
3.5mm Small SCP LC Plate 9 Hole
£38.00
934210010
3.5mm Small SCP LC Plate 10 Hole
£41.00
934210011
3.5mm Small SCP LC Plate 11 Hole
£43.00
934210012
3.5mm Small SCP LC Plate 12 Hole
£48.00
3.5mm Acetabular Plate No.
Code
Product Description
107401149
Acetabular Plate 3.5mm (6 Hole)
Price £40.00
1
28
Internal Fixation
Customer Service 0845 045 0259
Internal Fixation
4.5mm Plate and Screw Systems
4.5mm
4.5mm Cortical Screws Self Tapping No.
Code
Product Description
Price
930545012
4.5mm Cortical Screw S/T 12mm
£5.25
930545014
4.5mm Cortical Screw S/T 14mm
£5.25
930545016
4.5mm Cortical Screw S/T 16mm
£5.25
930545018
4.5mm Cortical Screw S/T 18mm
£5.75
930545020
4.5mm Cortical Screw S/T 20mm
£5.75
930545022
4.5mm Cortical Screw S/T 22mm
£5.75
930545024
4.5mm Cortical Screw S/T 24mm
£5.75
930545026
4.5mm Cortical Screw S/T 26mm
£5.75
930545028
4.5mm Cortical Screw S/T 28mm
£6.00
930545030
4.5mm Cortical Screw S/T 30mm
£6.00
930545032
4.5mm Cortical Screw S/T 32mm
£6.00
930545034
4.5mm Cortical Screw S/T 34mm
£6.00
930545036
4.5mm Cortical Screw S/T 36mm
£6.50
930545038
4.5mm Cortical Screw S/T 38mm
£6.50
930545040
4.5mm Cortical Screw S/T 40mm
£6.50
930545042
4.5mm Cortical Screw S/T 42mm
£6.50
930545044
4.5mm Cortical Screw S/T 44mm
£6.50
930545046
4.5mm Cortical Screw S/T 46mm
£7.00
930545048
4.5mm Cortical Screw S/T 48mm
£7.00
930545050
4.5mm Cortical Screw S/T 50mm
£7.00
930545052
4.5mm Cortical Screw S/T 52mm
£7.00
930545054
4.5mm Cortical Screw S/T 54mm
£7.00
930545055
4.5mm Cortical Screw S/T 55mm
£7.50
930545056
4.5mm Cortical Screw S/T 56mm
£7.50
930545058
4.5mm Cortical Screw S/T 58mm
£8.00
930545060
4.5mm Cortical Screw S/T 60mm
£8.50
930545065
4.5mm Cortical Screw S/T 65mm
£9.00
930545070
4.5mm Cortical Screw S/T 70mm
£10.00
930545075
4.5mm Cortical Screw S/T 75mm
£10.50
930545080
4.5mm Cortical Screw S/T 80mm
£11.00
930545085
4.5mm Cortical Screw S/T 85mm
£11.50
930545090
4.5mm Cortical Screw S/T 90mm
£12.00
930545095
4.5mm Cortical Screw S/T 95mm
£12.50
9305450100
4.5mm Cortical Screw S/T 100mm
£13.00
9305450105
4.5mm Cortical Screw S/T 105mm
£14.00
9305450110
4.5mm Cortical Screw S/T 110mm
£15.00
www.orthomed.co.uk
Internal Fixation
29
Internal Fixation
4.5mm Plate and Screw Systems
4.5mm Standard Cortical Screws No.
30
Code
Product Description
Price
930245012
4.5mm Standard Cortical Screw 12mm
4.80
930245014
4.5mm Standard Cortical Screw 14mm
4.80
930245016
4.5mm Standard Cortical Screw 16mm
4.80
930245018
4.5mm Standard Cortical Screw 18mm
5.20
930245020
4.5mm Standard Cortical Screw 20mm
5.20
930245022
4.5mm Standard Cortical Screw 22mm
5.20
930245024
4.5mm Standard Cortical Screw 24mm
5.20
930245026
4.5mm Standard Cortical Screw 26mm
5.20
930245028
4.5mm Standard Cortical Screw 28mm
5.40
930245030
4.5mm Standard Cortical Screw 30mm
5.40
930245032
4.5mm Standard Cortical Screw 32mm
5.40
930245034
4.5mm Standard Cortical Screw 34mm
5.40
930245036
4.5mm Standard Cortical Screw 36mm
5.90
930245038
4.5mm Standard Cortical Screw 38mm
5.90
930245040
4.5mm Standard Cortical Screw 40mm
5.90
930245042
4.5mm Standard Cortical Screw 42mm
5.90
930245044
4.5mm Standard Cortical Screw 44mm
5.90
930245046
4.5mm Standard Cortical Screw 46mm
6.30
930245048
4.5mm Standard Cortical Screw 48mm
6.30
930245050
4.5mm Standard Cortical Screw 50mm
6.30
930245052
4.5mm Standard Cortical Screw 52mm
6.30
930245054
4.5mm Standard Cortical Screw 54mm
6.30
930245056
4.5mm Standard Cortical Screw 56mm
6.80
930245058
4.5mm Standard Cortical Screw 58mm
7.20
930245060
4.5mm Standard Cortical Screw 60mm
7.70
930245065
4.5mm Standard Cortical Screw 65mm
8.10
930245070
4.5mm Standard Cortical Screw 70mm
9.00
930245075
4.5mm Standard Cortical Screw 75mm
9.50
930245080
4.5mm Standard Cortical Screw 80mm
9.90
930245085
4.5mm Standard Cortical Screw 85mm
10.40
930245090
4.5mm Standard Cortical Screw 90mm
10.80
930245095
4.5mm Standard Cortical Screw 95mm
11.30
9302450100
4.5mm Standard Cortical Screw 100mm
11.70
9302450105
4.5mm Standard Cortical Screw 105mm
12.60
9302450110
4.5mm Standard Cortical Screw 110mm
13.50
Internal Fixation
Customer Service 0845 045 0259
Internal Fixation 4.5mm Self Compression Narrow Plates No.
Code
Product Description
Price
934112005
4.5mm SCP Narrow Plate 5 Hole
£31.00
934112006
4.5mm SCP Narrow Plate 6 Hole
£32.00
934112007
4.5mm SCP Narrow Plate 7 Hole
£33.00
934112008
4.5mm SCP Narrow Plate 8 Hole
£35.00
934112009
4.5mm SCP Narrow Plate 9 Hole
£38.00
934112010
4.5mm SCP Narrow Plate 10 Hole
£41.00
934112011
4.5mm SCP Narrow Plate 11 Hole
£45.00
934112012
4.5mm SCP Narrow Plate 12 Hole
£47.50
934112013
4.5mm SCP Narrow Plate 13 Hole
£50.00
934112014
4.5mm SCP Narrow Plate 14 Hole
£55.00
934112015
4.5mm SCP Narrow Plate 15 Hole
£58.00
934112016
4.5mm SCP Narrow Plate 16 Hole
£65.00
934112018
4.5mm SCP Narrow Plate 18 Hole
£68.00
4.5mm Self Compression Broad Plates No.
Code
Product Description
Price
934116006
4.5mm SCP Broad Plate 6 Hole
£40.00
934116007
4.5mm SCP Broad Plate 7 Hole
£45.00
934116008
4.5mm SCP Broad Plate 8 Hole
£47.50
934116009
4.5mm SCP Broad Plate 9 Hole
£50.00
934116010
4.5mm SCP Broad Plate 10 Hole
£52.50
934116011
4.5mm SCP Broad Plate 11 Hole
£55.00
934116012
4.5mm SCP Broad Plate 12 Hole
£55.00
934116014
4.5mm SCP Broad Plate 14 Hole
£60.00
934116016
4.5mm SCP Broad Plate 16 Hole
£65.00
934116018
4.5mm SCP Broad Plate 18 Hole
£70.00
934116020
4.5mm SCP Broad Plate 20 Hole
£75.00
www.orthomed.co.uk
Internal Fixation
31
Internal Fixation
5.5mm Plate and Screw Systems
5.5mm
5.5mm Standard Cortical Screw No.
32
Code
Product Description
930255020
5.5mm Standard Cortical Screw 20mm
£10.00
930255022
5.5mm Standard Cortical Screw 22mm
£10.00
930255024
5.5mm Standard Cortical Screw 24mm
£10.00
930255026
5.5mm Standard Cortical Screw 26mm
£10.00
930255028
5.5mm Standard Cortical Screw 28mm
£12.00
930255030
5.5mm Standard Cortical Screw 30mm
£12.00
930255032
5.5mm Standard Cortical Screw 32mm
£12.00
930255034
5.5mm Standard Cortical Screw 34mm
£14.00
930255036
5.5mm Standard Cortical Screw 36mm
£14.00
930255038
5.5mm Standard Cortical Screw 38mm
£14.00
930255040
5.5mm Standard Cortical Screw 40mm
£16.00
930255042
5.5mm Standard Cortical Screw 42mm
£16.00
930255044
5.5mm Standard Cortical Screw 44mm
£16.00
930255046
5.5mm Standard Cortical Screw 46mm
£18.00
930255048
5.5mm Standard Cortical Screw 48mm
£18.00
930255050
5.5mm Standard Cortical Screw 50mm
£20.00
930255052
5.5mm Standard Cortical Screw 52mm
£20.00
930255054
5.5mm Standard Cortical Screw 54mm
£20.00
930255056
5.5mm Standard Cortical Screw 56mm
£20.00
930255058
5.5mm Standard Cortical Screw 58mm
£22.00
930255060
5.5mm Standard Cortical Screw 60mm
£22.00
930255062
5.5mm Standard Cortical Screw 62mm
£22.00
930255064
5.5mm Standard Cortical Screw 64mm
£22.00
930255065
5.5mm Standard Cortical Screw 65mm
£22.00
930255066
5.5mm Standard Cortical Screw 66mm
£22.00
930255068
5.5mm Standard Cortical Screw 68mm
£22.00
930255070
5.5mm Standard Cortical Screw 70mm
£24.00
930255072
5.5mm Standard Cortical Screw 72mm
£24.00
930255074
5.5mm Standard Cortical Screw 74mm
£24.00
930255075
5.5mm Standard Cortical Screw 75mm
£24.00
930255076
5.5mm Standard Cortical Screw 76mm
£24.00
930255080
5.5mm Standard Cortical Screw 80mm
£26.00
930255085
5.5mm Standard Cortical Screw 85mm
£26.00
930255090
5.5mm Standard Cortical Screw 90mm
£28.00
930255095
5.5mm Standard Cortical Screw 95mm
£28.00
930255100
5.5mm Standard Cortical Screw 100mm
£30.00
Internal Fixation
Price
Customer Service 0845 045 0259
Internal Fixation Cancellous Screws
4.0mm
4.0mm Part Threaded Cancellous Bone Screws No.
Code
Product Description
Price
931004010
4.0mm Part-Threaded Cancellous Screw 10mm
£4.00
931004012
4.0mm Part-Threaded Cancellous Screw 12mm
£4.00
931004014
4.0mm Part-Threaded Cancellous Screw 14mm
£4.25
931004016
4.0mm Part-Threaded Cancellous Screw 16 mm
£4.25
931004018
4.0mm Part-Threaded Cancellous Screw 18mm
£4.50
931004020
4.0mm Part-Threaded Cancellous Screw 20mm
£4.50
931004022
4.0mm Part-Threaded Cancellous Screw 22mm
£4.50
931004024
4.0mm Part-Threaded Cancellous Screw 24mm
£5.00
931004026
4.0mm Part-Threaded Cancellous Screw 26mm
£5.00
931004028
4.0mm Part-Threaded Cancellous Screw 28mm
£5.00
931004030
4.0mm Part-Threaded Cancellous Screw 30mm
£5.50
931004035
4.0mm Part-Threaded Cancellous Screw 35mm
£5.50
931004040
4.0mm Part-Threaded Cancellous Screw 40mm
£5.50
931004045
4.0mm Part-Threaded Cancellous Screw 45mm
£6.50
931004050
4.0mm Part-Threaded Cancellous Screw 50mm
£6.50
931004055
4.0mm Part-Threaded Cancellous Screw 55mm
£7.00
931004060
4.0mm Part-Threaded Cancellous Screw 60mm
£7.00
4.0mm Fully Threaded Cancellous Bone Screws No.
Code
Product Description
Price
931140010
4.0mm Fully-Threaded Cancellous Screw 10mm
£3.50
931140012
4.0mm Fully-Threaded Cancellous Screw 12mm
£3.50
931140014
4.0mm Fully-Threaded Cancellous Screw 14mm
£3.50
931140016
4.0mm Fully-Threaded Cancellous Screw 16mm
£3.50
931140018
4.0mm Fully-Threaded Cancellous Screw 18mm
£4.25
931140020
4.0mm Fully-Threaded Cancellous Screw 20mm
£4.25
931140022
4.0mm Fully-Threaded Cancellous Screw 22mm
£4.25
931140024
4.0mm Fully-Threaded Cancellous Screw 24mm
£4.25
931140026
4.0mm Fully-Threaded Cancellous Screw 26mm
£4.25
931140028
4.0mm Fully-Threaded Cancellous Screw 28mm
£4.25
931140030
4.0mm Fully-Threaded Cancellous Screw 30mm
£5.00
931140032
4.0mm Fully-Threaded Cancellous Screw 32mm
£5.00
931140034
4.0mm Fully-Threaded Cancellous Screw 34mm
£5.00
931140036
4.0mm Fully-Threaded Cancellous Screw 36mm
£5.00
931140038
4.0mm Fully-Threaded Cancellous Screw 38mm
£5.00
931140040
4.0mm Fully-Threaded Cancellous Screw 40mm
£5.75
931140045
4.0mm Fully-Threaded Cancellous Screw 45mm
£5.75
931140050
4.0mm Fully-Threaded Cancellous Screw 50mm
£6.50
931140055
4.0mm Fully-Threaded Cancellous Screw 55mm
£6.50
931140060
4.0mm Fully-Threaded Cancellous Screw 60mm
£7.00
www.orthomed.co.uk
Internal Fixation
33
Internal Fixation
6.5mm
6.5mm Part Threaded Cancellous Bone Screws No.
Code
Product Description
Price
931365030
6.5mm Cancellous Screw 16mm Thread 30mm
£6.25
931365035
6.5mm Cancellous Screw 16mm Thread 35mm
£6.25
931365040
6.5mm Cancellous Screw 32mm Thread 40mm
£6.50
931365045
6.5mm Cancellous Screw 32mm Thread 45mm
£6.50
931365050
6.5mm Cancellous Screw 32mm Thread 50mm
£6.50
931365055
6.5mm Cancellous Screw 32mm Thread 55mm
£6.75
931365060
6.5mm Cancellous Screw 32mm Thread 60mm
£6.75
931365065
6.5mm Cancellous Screw 32mm Thread 65mm
£6.75
931365070
6.5mm Cancellous Screw 32mm Thread 70mm
£6.75
931365075
6.5mm Cancellous Screw 32mm Thread 75mm
£7.15
931365080
6.5mm Cancellous Screw 32mm Thread 80mm
£7.15
6.5mm Fully Threaded Cancellous Bone Screws No.
34
Code
Product Description
Price
931465030
6.5mm Cancellous Screw Fully-Threaded 30mm
£7.00
931465035
6.5mm Cancellous Screw Fully-Threaded 35mm
£7.00
931465040
6.5mm Cancellous Screw Fully-Threaded 40mm
£7.50
931465045
6.5mm Cancellous Screw Fully-Threaded 45mm
£8.00
931465050
6.5mm Cancellous Screw Fully-Threaded 50mm
£8.50
931465055
6.5mm Cancellous Screw Fully-Threaded 55mm
£9.00
931465060
6.5mm Cancellous Screw Fully-Threaded 60mm
£9.00
931465065
6.5mm Cancellous Screw Fully-Threaded 65mm
£9.00
931465070
6.5mm Cancellous Screw Fully-Threaded 70mm
£9.50
Internal Fixation
Customer Service 0845 045 0259
Internal Fixation Plates, Nuts and Washers
Acetabular Plates No.
Code
Product Description
Price
107401149
Acetabular Plate 3.5mm (6 Hole)
£40.00
107401150
Acetabular Plate 2.7mm (6 Hole)
£40.00
107401151
Acetabular Plate 2.0mm (6 Hole)
£40.00 1
T Plates No.
Code
Product Description
Price
935913033
T Plate 3.5mm - Right Angled 3HH x 3HT
£25.00
935913034
T Plate 3.5mm - Right Angled 3HH x 4HT
£25.00
935913035
T Plate 3.5mm - Right Angled 3HH x 5HT
£30.00
935913044
T Plate 3.5mm - Right Angled 4HH x 4HT
£40.00
935913046
T Plate 3.5mm - Right Angled 4HH x 6HT
£40.00
935914133
T Plate 3.5mm - Oblique Angled 3HH x 3HT
£27.00
935914134
T Plate 3.5mm - Oblique Angled 3HH x 4HT
£27.00
935914135
T Plate 3.5mm - Oblique Angled 3HH x 5HT
£32.00
935914133
T Plate 3.5mm - Thick Oblique Angled 3HH x 3HT
£34.00
935914134
T Plate 3.5mm - Thick Oblique Angled 3HH x 4HT
£34.00
935914135
T Plate 3.5mm - Thick Oblique Angled 3HH x 5HT
£37.50
935918000
T Plate 2.7mm
£10.00
935920000
T Plate 2.0mm
£10.00
Code
Product Description
Price
932999001
Washer 4.5mm - 6.5mm
£4.00
932999002
Washer 2.7mm - 4.00mm
£2.50
932999003
Washer 1.5mm - 2.0mm
£2.50
932999011
Cortical Nut
£7.00
932999012
Ligament Washer 4.5mm - 6.0mm
£28.00
932999013
Ligament Washer for 3.5mm Screw
£26.00
932999014
Ligament Washer for 2.7mm Screw
£20.00
www.orthomed.co.uk
1
1
Nuts and Washers No.
1
1
Internal Fixation
35
Instrumentation Jacob Chuck Drill Bits No.
Code
Product Description
Price
900000011
1.1mm Drill Bit (JC)
£18.00
900000015
1.5mm Drill Bit (JC)
£18.00
900000020
2.0mm Drill Bit (JC)
£18.00
900000025
2.5mm Drill Bit (JC)
£23.00
900000027
2.7mm Drill Bit (JC)
£23.00
900000032
3.2mm Drill Bit (JC)
£23.00
900000035
3.5mm Drill Bit (JC)
£28.00
900000040
4.0mm Drill Bit (JC)
£28.00
900000045
4.5mm Drill Bit (JC)
£28.00
Quick Coupling Drill Bits No.
Code
Product Description
Price
900100011
1.1mm Drill Bit (QC)
£20.00
900100015
1.5mm Drill Bit (QC)
£20.00
900100020
2.0mm Drill Bit (QC)
£20.00
900100025
2.5mm Drill Bit (QC)
£25.00
901000025
2.5mm Drill Bit (QC) - Long
£45.00
900100027
2.7mm Drill Bit (QC)
£25.00
900100032
3.2mm Drill Bit (QC)
£25.00
900100035
3.5mm Drill Bit (QC)
£30.00
900100045
4.5mm Drill Bit (QC)
£30.00
Cortical Taps No.
36
Code
Product Description
Price
900200150
1.5mm Cortical Tap
£30.00
900200200
2.0mm Cortical Tap
£30.00
900200270
2.7mm Cortical Tap
£30.00
900200350
3.5mm Cortical Tap
£30.00
900200450
4.5mm Cortical Tap
£30.00
Instrumentation
1
Customer Service 0845 045 0259
Instrumentation Cancellous Taps No.
Code
Product Description
Price
900201400
Cancellous Tap 4mm
£30.00
900201650
Cancellous Tap 6.5mm
£35.00
1
Screwdrivers No.
Code
Product Description
900425010
Screwdriver Shaft for QC Handle for 1.5 - 2.0mm Screws
900425020
Complete Screwdriver for 2.7 - 4.0mm Screws
900425030
Screwdriver Shaft for QC Handle for 2.7 - 4.0mm Screws
900425040
Complete Screwdriver for 4.5 - 6.5mm Screws
900425050
Screwdriver Shaft for QC for 4.5 - 6.5mm Screws
Price £65.00 £130.00 £35.00 £150.00
1
£55.00
Double Drill Guides No.
Code
Product Description
900200115
Double Drill Guide 1.1/1.5mm
£80.00
900200152
Double Drill Guide 1.5/2.0mm
£85.00
900200207
Double Drill Guide 2.0/2.7mm
£90.00
900200255
Double Drill Sleeve 2.5/3.5mm
£95.00
900200324
Double Drill Sleeve 4.5/3.2mm
£100.00
800202027
SOP™ Double Drill Guide 2.7/2.0mm
£125.00
800202535
SOP™ Double Drill Guide 3.5mm/2.5mm
£125.00
900000020
2.0mm Drill Bit (JC)
£18.00
900100020
2.0mm Drill Bit (QC)
£20.00
900100025
QC 2.5mm Drill Bit
£25.00
900000025
JC 2.5mm Drill Bit
£23.00
www.orthomed.co.uk
Price
Instrumentation
37
Instrumentation Load-Neutral Drill Guides No.
Code
Product Description
Price
900320000
Compression Drill Guide 2.0mm
£130.00
900327000
Compression Drill Guide 2.7mm
£130.00
900335000
Compression Drill Guide 3.5mm
£135.00
900345000
Compression Drill Guide 4.5mm
£140.00
Countersinks No.
Code
Product Description
900415001
Countersink 1.5/2.0mm
Price £50.00
900427001
Countersink 2.7mm
£50.00
900435001
Countersink 3.5mm
£50.00
900445001
Large Countersink (has own handle) 4.5mm
£80.00
1
Insert Drill Sleeves No.
Code
Product Description
900303525
Insert Drill Sleeve 3.5/2.5mm
800302535
SOP™ - 3.5mm Insert Drill Sleeve (15mm Extension)
Price £40.00 TBC
1
Depth Gauges No.
Code
Product Description
Price
900400152
Depth Gauge 1.5/2.0mm
£140.00
900400274
Depth Gauge 2.7/4.0mm
£145.00
900400456
Depth Gauge 4.5/6.5mm
£150.00 1
38
Instrumentation
Customer Service 0845 045 0259
Instrumentation Bending Irons/Pliers No.
Code
Product Description
Price
900411015
Bending Iron 1.5 - 2.0mm
£70.00
900411127
Bending Iron 2.7 - 4.0mm (Left)
£75.00
900411227
Bending Iron 2.7 - 4.0mm (Right)
900412015
Bending Pliers for Plates 1.5 / 2.7mm
£155.00
900412027
Bending Pliers for Plates 2.4 / 4.0mm
£700.00
900414003
Bending Iron for Kirschner Wires 1.25 - 2.5mm
800400027
SOP™ 2.7mm Bending Iron (Left)
£172.50
800410027
SOP™ 2.7mm Bending Iron (Right)
£172.50
800400035
SOP™ 3.5mm Bending Iron (Left)
£172.50
800410035
SOP™ 3.5mm Bending Iron (Right)
£172.50
£75.00
£45.00
Bone Forceps No.
Code
Product Description
Price
900500001
Holding Forceps for Small Plates
£100.00
900500002
Reduction Forceps with Points, Narrow
£130.00
900500003
Reduction Forceps with Points, Wide
£130.00
900500004
Reduction Forceps with Points
£150.00
900500005
Reduction Forceps with Teeth
£150.00
900500006
Self-Centering Bone Holding Forceps 190mm
£180.00
900500007
Stagbeetle Forceps
£100.00
900500008
Large Reduction Forceps, with Points
£160.00
900500009
Large Reduction Forceps with Points and Speedlock, 200mm
£200.00
1
1
www.orthomed.co.uk
Instrumentation
39
Instrumentation Bending Templates No.
Code
Product Description
Price
900410087
Bending Template 87mm
£15.00
900410114
Bending Template 114mm
£15.00
900410120
Bending Template 120mm
£24.00
900410155
Bending Template 155mm
£24.00
900410210
Bending Template 210mm
£24.00
Quick Coupling Handles No.
40
Code
Product Description
900420001
QC Handle - Mini Straight
£110.00
900420002
QC Handle - Pear Shape
£110.00
900420003
T-Handle QC
Instrumentation
Price
£95.00
Customer Service 0845 045 0259
Instrumentation Screw Forceps No.
Code
Product Description
900500000
Self-Holding Screw Forceps
Price £30.00
Retractors No.
Code
Product Description
Price
900530006
Rectractor 6mm
£50.00
900530008
Retractor 8mm
£50.00
900530015
Retractor 15mm
£70.00
Periosteal Elevators No.
Code
Product Description
Price
900535003
Periosteal Elevator 3mm
£85.00
900535006
Periosteal Elevator 6mm
£90.00
www.orthomed.co.uk
Instrumentation
41
Pins and Wires We have a full range of K-wires both single and double pointed. Our Steinmann pins are all 300mm standard length, trocar tipped and range from 1.6mm to 6.0mm. Our cerclage wire is available on a roll or ready-looped for use with the wire twister.
Steinmann Pins No.
Code
Product Description
Price
938016300
Steinmann Pin Trocar Tip 1.6mm x 300mm long
£3.67
938018300
Steinmann Pin Trocar Tip 1.8mm x 300mm long
£4.00
938020300
Steinmann Pin Trocar Tip 2.0mm x 300mm long
£4.25
938024300
Steinmann Pin Trocar Tip 2.4mm x 300mm long
£5.00
938028300
Steinmann Pin Trocar Tip 2.8mm x 300mm long
£5.45
938032300
Steinmann Pin Trocar Tip 3.2mm x 300mm long
£5.80
938036300
Steinmann Pin Trocar Tip 3.6mm x 300mm long
£6.75
938040300
Steinmann Pin Trocar Tip 4.0mm x 300mm long
£8.80
938048300
Steinmann Pin Trocar Tip 4.8mm x 300mm long
£9.20
938060300
Steinmann Pin Trocar Tip 6.0mm x 300mm long
£13.12
Double Point Trocar Wires No.
Code
Product Description
Price
937608150
Trocar Pointed at both ends 0.8mm x 150mm
£20.00
937610150
Trocar Pointed at both ends 1.0mm x 150mm
£20.00
937612150
Trocar Pointed at both ends 1.2mm x 150mm
£22.00
937616150
Trocar Pointed at both ends 1.6mm x 150mm
£22.00
937620150
Trocar Pointed at both ends 2.0mm x 150mm
£22.00
1
Single Point Trocar Wires No.
42
Code
Product Description
937508150
Single end Trocar 0.8mm x 150mm
£16.00
937510150
Single end Trocar 1.0mm x 150mm
£16.00
937512150
Single end Trocar 1.2mm x 150mm
£17.00
937516150
Single end Trocar 1.6mm x 150mm
£17.00
937520150
Single end Trocar 2.0mm x 150mm
£17.00
Pins and Wires
Price
Customer Service 0845 045 0259
Pins and Wires
Cerclage Wire - Looped No.
Code
Product Description
Price
938408280
Cerclage wire with loop 0.8 x 280mm
£4.00
938410280
Cerclage wire with Loop 1.0 x 280mm
£4.00
938412280
Cerclage wire with Loop 1.2 x 280mm
£4.00
Cerclage Wire - Coiled No.
Code
Product Description
938506010
Cerclage Wire Coil 0.6 x 10mm
Price £13.00
938508010
Cerclage Wire Coil 0.8 x 10mm
£18.00
938510010
Cerclage Wire Coil 1.0 x 10mm
£23.00
938512010
Cerclage Wire Coil 1.2 x 10mm
£28.00
938514010
Cerclage Wire Coil 1.4 x 10mm
£35.00
Standard Instruments No.
Code
Product Description
Price
900414001
Wire Bending Pliers
£95.00
900414002
Short Wire Cutter
900414003
Bending Iron - Kirschner Wires
900414004
Wire Twister
www.orthomed.co.uk
£180.00 £45.00 TBC
Pins and Wires
43
Arthroscopy Our range of arthroscopy equipment has been developed by one of the world’s leading arthroscopy manufacturers.
Please contact our customer services team who will be happy to send you the latest product specifications and prices.
We offer the full spectrum of products from hand instruments to a full rack system including monitor, camera, light source, digital storage systems, fluid pumps, shaver systems and of course scopes!
Wherever possible we will offer a full trial period with all our arthroscopy products including full training on both the use and maintenance of the products. We can also offer a number of finance options.
As I am sure you will be aware, the technology that is used in products such as cameras and light sources changes at such a fast rate that we do not include details of these here.
Please contact us to discuss your needs.
All Arthroscopes are fully autoclavable
1.9mm Arthroscopy Set No.
Code
Product Description
Price
455-12000
Arthrolux Telescope 1.9mm w/length 69mm 30deg
455-31190
1.9mm Arthroshaft with 2 r/s
455-35190
Trocar for 1.9mm Arthroshaft (Conical Blunt)
£49.06
455-30190
Trocar for 1.9mm Arthroshaft (Pyramidal Sharp)
£49.06
£1,795.00 £202.00
2.4mm Arthroscopy Set No.
44
Code
Product Description
455-24200
Arthrolux Telescope 1.9mm w/length 110mm 30deg
455-35240
2.4mm Arthroshaft with 2 r/s
455-31240
Trocar for 2.4mm Arthroshaft (Conical Blunt)
£61.00
455-30240
Trocar for 2.4mm Arthroshaft (Pyramidal Sharp)
£55.00
Arthroscopy
Price £1,404.00 £170.00
Customer Service 0845 045 0259
Arthroscopy Need e? nc Assistacustomer our Contact team today! e ic serv
2.7mm Athroscopy Set No.
Code
Product Description
Price
455-27200
2.7mm Arthrolux Telescope w/length 100mm 30deg
455-35370
2.7mm Arthroshaft with 2 r/s
£1,695.00
455-31370
Trocar for 2.7mm Arthroshaft (Conical Blunt)
£49.06
455-30370
Trocar for 2.7mm Arthroshaft (Pyramidal Sharp)
£60.00
£202.00
2.7mm Long Arthroscopy Set No.
Code
Product Description
Price
455-29200
2.7mm Arthrolux Telescope w/length 180mm 30deg
455-35270
2.7mm Arthroshaft with 2 r/s
455-31270
Trocar for 2.7mm Arthroshaft (Conical Blunt)
£49.06
455-30270
Trocar for 2.7mm Arthroshaft (Pyramidal Sharp)
£55.10
£1,695.00 £202.00
4.0mm Arthroscopy Set No.
Code
Product Description
455-19300
4.0mm Arthrolux Telescope w/length 175mm 30deg
Price £1,595.00
455-35200
4.0mm Arthroshaft with 2 r/s
455-31200
Trocar for 4.0mm Arthroshaft (Conical Blunt)
£53.69
455-30200
Trocar for 4.0mm Arthroshaft (Pyramidal Sharp)
£59.63
www.orthomed.co.uk
£163.05
Arthroscopy
45
Arthroscopy
Arthroscopic Instrumentation
Arthroscopic Instrumentation No.
Code
Product Description
Price
455-60070
Scalpel Knife
£41.00
455-60071
Banana Knife
£41.00
455-60072
Rosette Knife
£41.00
455-60073
SMILLIE Meniscotome - Thin
£41.00
455-60074
SMILLIE Meniscotome - Wide
£41.00
455-60075
Hook Knife
£41.00
455-60076
Spoon (30deg Curved)
£49.00
455-60077
Cartilage File
£49.00
455-60170
Universal Handle for Hand Instruments
£49.00
(to follow)
Hand Instrument Set (Complete)
£353.70
2.0mm System No.
Code
Product Description
Price
456-02030
2.0mm Arthroscopy Forcep Set
£1181.50
1
456-02005
2.0mm Mini Grasping Forceps
£340.00
456-02010
2.0mm Mini Rongeur + Biopsy Forceps
£340.00
2
456-02020
2.0mm Mini Scissor
£340.00
3
456-02015
2.0mm Mini Punch
£370.00
1
2 1
3 1
46
Arthroscopy
Customer Service 0845 045 0259
Arthroscopy 2.4mm System No.
Code
Product Description
Price
456-02430
2.4mm Arthroscopy Forcep Set
£1351.50
4
456-02405
2.4mm Mini Grasping Forceps
£390.00
5
456-02410
2.4mm Mini Rongeur Forceps
£390.00
6
456-02420
2.4mm Mini Scissor
£390.00
7
456-02415
2.4mm Mini Punch
£420.00
4
5
6
7
8
9
10
11
2.7mm System No.
Code
Product Description
456-02730
2.7mm Arthroscopy Forcep Set
Price £1683.00
8
456-02705
2.7mm Alligator Forceps
£390.00
9
456-02710
2.7mm Universal Rongeur Forceps
£390.00
10
456-02725
2.7mm Scissors
£390.00
11
456-02720
2.7mm Punch
£420.00
456-02715
2.7mm Biopsy Forceps
£390.00
3.4mm System No.
Code
Product Description
456-03410
3.4mm Universal Rongeur
www.orthomed.co.uk
Price £420.00
Arthroscopy
47
Arthroscopy Maintenance Process All Arthroscopes are fully autoclavable
Cleaning: Predisinfection: For predisinfection immerse the telescope in an aqueous disinfecting solution after use (see disinfecting solutions described on the right side). Crude Soiling: Clean the telescope thoroughly after use. Remove crude soiling with plenty of water. Do not use ultrasonic cleaning. Disassembling: Disconnect the adaptors from the light guide connector. Mild Detergent: Further cleaning should be done by immersing the telescope in a mild detergent solution. Use cloths and soft brushes. Rinsing with Distilled Water: After cleaning, rinse the telescope with deionized (distilled) water to prevent coating. Encrustation on optical surfaces may be removed by using polishing cotton. Optical Surfaces: In general, optical surfaces should be cleaned using a cotton swab soaked with 70% Ethanol. Never apply metal tools to the telescope. Drying: Finally dry the instrument carefully with tissues, gauze or compressed air. Reconnect the adaptors to the light guide connector.
Sterilization:
Gas sterilization ATTENTION: The safety instructions for gas sterilization have to be observed and biological indicators have to be used. After disinfecting and cleaning the dried telescopes have to be packed into the designated sterile packagings. MGB telescopes qualify for the following parameters (ethylene oxide sterilization according to ISO 111135-1994). • Pressure: max. 2,2 bar Both overpressure and negative gas sterilizers can be used.
Disinfection: Only thoroughly cleaned telescopes should be disinfected. We recommend disinfectants by the following manufacturers: Aseptisol 2,5 % Manufacturer: Bode Chemie Hamburg Melanchthonstraße 27 D-22525 Hamburg Gigasept FF 4,0 % Manufacturer: Schülke & Mayr GmbH Heidbergstraße 100 D-22846 Norderstedt
To achieve the sterility assurance level (SAL) of *10–6 MGB recommends the following steam and gas sterilization methods.
Cidex 3,0 % Manufacturer: Johnson & Johnson Medical GmbH Oststraße 1 D-22806 Norderstedt
Steam sterilization
The telescopes are also tolerable to 100 % alcohol.
After disinfecting and cleaning, the telescopes have to be packed into special sterile containers for endoscopes or designated packaging. MGB telescopes qualify for the following parameters (steam sterilization according to ISO 111134-1993).
Put the telescope into the disinfecting solution. The telescope has to be completely moistened with solution. Follow the soaking time and solution concentration prescribed by the manufacturer. A higher soaking time or concentration can lead to damages of the telescope. Rinse off disinfecting residues on the telescopes with sterile water, after drying with sterile cloth swabs wrap it into sterile cloth. For temporary storing, keep the telescope wrapped in cloth in a closed and sterile container.
• • • •
Temperature: 134°C Pressure: 2,2 bar Effecting time: 5min to max 7,5min Batch time: 20 to 30 min
Remove telescopes from the tray after they have cooled down (room temperature). Do not chill them.
48
Arthroscopy
Customer Service 0845 045 0259
Joint Replacement We work closely with BioMedtrix and distribute the full range of joint replacement products, including the new Universal Total Hip Replacement System to certified surgeons. Please contact us for full details on the product range. If you are interested in becoming certified on any of the BioMetrix Joint Replacement Systems including Universal Hip, Total Elbow or Total Knee, please contact our customer service team or check out our website.
www.orthomed.co.uk
Joint Replacement
49
Terms and Conditions Definitions 1.1 Company means Orthomed (UK) Ltd 1.2 ‘Customer/ means the veterinary practice or any person to whom the Company has agreed to supply goods. 1.3 Goods’ means the products which the Company is to supply to the customer in accordance with these conditions. 1.4 ‘Writing’ includes telex, cable, facsimile transmission, e-mail or similar means of communication. 2. Breakages and Shortages In the case of obvious shortages or suspected damage to deliveries of goods, the drivers delivery note must be signed accordingly by the person accepting the delivery on behalf of the customer. All claims for broken or missing goods should be reported to the Company no later than three days from the date of delivery. Where independent transport is used failure to sign or indicate on delivery notes any shortage and/or damage will invalidate the Company claim against the carrier involved and therefore the customers claim against the Company. 3. Returned Goods Policy 3.1 Under normal circumstances, goods will not be accepted for return for credit other than for the following reasons: a) To correct a Company delivery or order error, b) In response to a recall instigated by a manufacturer. c) Where the products or packages are alleged to have been faulty, damaged or tampered with prior to delivery. d) Where the products have been offered on a pre-arranged sale or return basis. e) Where the Company agrees, in advance of their return, to accept goods not covered by any of the above criteria. 3.2 Goods Returned to Correct a Company Error a) The goods must be returned within 7 working days of receipt. Goods requiring temperature-controlled storage must be notified to the Company no later than the next working day and must have been stored in accordance with the manufacturer’s recommendations whilst on the customer’s premises. Goods must be adequately packaged to ensure that no damage is caused during their return to the Company. b) All returned goods must be in perfect original condition; not marked in any way; should not show any evidence of being tampered with. c) To be considered for return for credit, the goods must be accompanied by a copy of the original invoice or delivery note, or the number of the specific invoice on which the goods were supplied, together with a reason for their return. If this information is missing, there will be a delay in issuing a credit. 3.3 Returns where the products or packages are alleged to have been faulty damaged or tampered with prior to delivery: a) Details of the fault or damage should be notified to the Company as soon as possible in order that the manufacturer can be alerted if appropriate. b) Goods must be packed separately and accompanied by a copy of the invoice or delivery note (as in 3.2(c)) 3.4 Where the Company agrees to accept the return of goods not covered by any of the criteria recited in clauses 3.2- 3.4.Goods will only be accepted by prior agreement with the Company and must be accompanied all the information detailed in 3.2(c) in addition to the name of the person who has authorised the return. Please note’ Goods returned under this category may be subject-to a handling charge. 3.5 Goods returned to stock.Goods returned by customers for any of the above reasons will only be considered for credit if; a) It is known that they have been stored in accordance with the manufacturers recommendations. b) They have been assessed and accepted by a person authorised by the Company so to do. The assessment will take into account the nature of the product, any special storage conditions required and the time elapsed since the goods were supplied. 3.6 Special Orders. These products will not be accepted for return or credit unless supplied as a result of Company error. In such cases, the product must be returned within 7 working days of receipt. 3.7 Packaging. All returned goods must be securely packaged to prevent damage during the return journey. 3.8 Date Expired Good. Date Expired Goods will only be accepted for credit in accordance with the terms laid down by the manufacturer concerned. 4. Price of Goods Goods will be invoiced at the prevailing price at the date of despatch to the customer. The price of goods shall be subject to alteration by the Company without prior notice to the customer; the price is exclusive of any Value Added Tax for which the customer shall be additionally liable to pay the Company. 5. Terms of Payment. 5.1 The customer shall pay the amount of the invoice nett 30 days from the date of the Company’ invoice unless by prior agreement in writing from the Company. If the customer fails to pay on the due date, the Company reserves the right to:
a) Suspend any further deliveries to the customer b) Appropriate any payment raised by the customer to such of any other invoices raised by the Company for goods supplied to the customer as the Company may think fit, notwithstanding any purported appropriation by the customer and: c) Charge the customer interest (both before and after any judgement) on amounts unpaid at the rate of 2.5% per month until payment is made in full. Notice of interest charges will be served in writing on the customer. 6. Delivery Any dates/times quoted for delivery of the goods are to be treated as estimates only and the Company shall not be liable for any loss, injury, damage or expense arising from delay In delivery of the goods howsoever caused. 7. Force Majeur 7.1 The Company shall not be liable to the customer or be deemed to be in breach of the Contract by reason of any delay in performing, or any failure to perform, any of the Company obligations in relation to the Goods, if the delay or failure was due to any cause beyond the Companies reasonable control, without prejudice to the generality of the foregoing, the following shall be regarded as causes beyond the Companies reasonable control: a) Act of God, explosion. flood, tempest, fire or accident; b) Strikes, lock-outs or other industrial actions or trade disputes (whether involving employees of the Company or third parties); c) War or threat of war, sabotage, insurrection, civil disturbance or requisition; d) Import or export regulations or embargos: e) Difficulties in obtaining raw materials, labour, fuel, parts or machinery; f) Power failure or breakdown in machinery. 8. Liability Goods are sold on the understanding that the customer is solely responsible for determining the suitability of the goods for the purposes for which the customer intends to use them. Accordingly the Company liability for any loss or damage suffered by the customer and arising by defects in the goods, shall be limited to the invoice price of the goods in respect of or in relation to which loss or damages is claimed. The Company will not accept under any circumstances liability for consequential loss, damage or loss of profits arising from the use of the goods, service, information and advice, 9. Title and Risk Unless otherwise agreed in writing between the parties prior to delivery, the title to the goods shall not be transferred to the customer until the full purchase price has been paid to the Company. The risk of loss or damage to the goods shall pass to the customer on the date that the goods are received and accepted by the customer 10. Solvency 10.1This clause applies if: a) The customer makes any voluntary arrangement with its creditors or becomes subject to an administration order or (being an individual or firm) becomes bankrupt or (being a company) goes into liquidation (otherwise than for the purpose of a solvent amalgamation or reconstruction); b) An encumbrance takes possession, or a receiver is appointed, over any of the property or assets of the customer; c) The customer ceases, or threatens to cease, to carry on business; d) The Company reasonably apprehends that any of the events mentioned above is about to occur in relation to the customer and notifies the customer accordingly. 10.2If this clause applies then, without prejudice to any other right or remedy available to the Company, the Company shall be entitled to cancel the Contract or suspend any further deliveries under the Contract without liability to the customer. If the Goods have been delivered but not paid for, the price shall become immediately due and payable notwithstanding any previous agreement or arrangement to the contrary. 11. Indemnity The customer agrees to indemnify the Company against all loss, damage, costs, legal costs and professional and other expenses of any nature whatsoever incurred or suffered by the Company or by a third party as a result of the use of the Goods. The breach of any legislation relating to the use of the Goods or as a result of any breach of the Contract by the customer. 12. Jurisdiction These conditions shall be construed in accordance with and governed by English Law. Each of the parties irrevocably submits for all purposes in connection with the Conditions to the exclusive jurisdiction of the Courts of England.
50 Terms and Conditions Customer Service 0845 045 0259
Delivery Options
Deliveries We aim to despatch all orders the same day of ordering, and can best achieve this if we receive your order BEFORE 3:30PM. Please state clearly if the order is urgent and advise your preferred method of delivery. Please bear in mind that no delivery service is without its faults! We will always do our best to track wayward deliveries for you.
Standard Delivery Prices include First Class Mail Postage and Packaging to UK addresses (unless otherwise stated)
Special Delivery - Post Office Service Delivery next day by 1:00pm (NB: not available for Saturday Deliveries) Cost from £4.50 + VAT Delivery next day by 9:30pm (NB: not available for Saturday Deliveries) Cost from £20.00 + VAT
Bank Details NatWest 8 Market Place Huddersfield HD1 2AL Account Number: Sort Code: BIC: IBAN:
61081698 53-61-07 NWBK GB 2L GB62 NWBK 5361 0761 0816 98
Courier Deliveries - Post Office Service Delivery next day (up to 6pm weekdays) to England and Lowland Scotland - cost depends on weight Cost from £5.00 + VAT Delivery next day by 1pm (weekdays only) to England and Lowland Scotland - price depends on weight Cost from £11.00 + VAT Delivery next day by 9:30am (weekdays only) to England and Lowland Scotland - price depends on weight Cost from £20.00 + VAT
Standard European Delivery Delivery using Royal Mail Airsure or International Signed For (dependant on country) - Delivery time 3-5 working days Cost from £5.00
Timed European Delivery Delivery using a courier - price depends on weight and delivery speed Cost from £20.00
www.orthomed.co.uk www.orthomed.co.uk
Delivery Options
51
Order Form Billing Address
Ship to Address (If Different)
Name:
Name:
Practice:
Practice:
Street:
Street:
Town/City:
Town/City:
Postcode:
Postcode:
Phone:
Phone:
Fax:
Fax:
Payment Method
Delivery Requirement (Tick One)
Purchase Order:
Standard:
Method: Card Type:
Account
Payment Card
MasterCard
Visa
Card Number:
UK
European
Next Day (UK)
9 am (UK)
1pm (UK)
European
Special (UK Only): Debit
Courier:
Expiry Date Security No:
Signature:
Item Number
Description
Quantity
Price
Please photocopy
52
Order Form
Fax: 0845 603 2456
Notes
Customer Service 0845 045 0259
53
Notes
54
Customer Service 0845 045 0259
Design by: The Mill Group
Customer Service 0845 045 0259
www.themillgroup.co.uk
55
Contact Details: Address: Orthomed (UK) LTD 81 Bowers Mill Branch Road Barkisland Halifax West Yorkshire HX4 OAD
Telephone: Tel: +44 (0) 845 045 0259 Fax: +44 (0) 845 603 2456
Web & Email: www.orthomed.co.uk
[email protected]
·product catalogue·
“You rely on your orthopaedic supplier to bring you the best quality products” “You also deserve first class customer service” At Orthomed we guarantee this and more.
Customer Service 0845 045 0259
Design by: The Mill Group
www.orthomed.co.uk
www.themillgroup.co.uk
55