Bbe22
This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA
Overview
Download & View Bbe22 as PDF for free.
More details
- Words: 292
- Pages: 3
OOK MODULATION BASED REMOTE CONTROL FOR 1-IM USING EMBEDDED MICROCONTROLLER
ABSTRACT:
Embedded system is the one of the firmware that is combination of software and hardware. Here the software is encapsulated in the hardware. In embedded system entire hardware is monitored and controlled by the software which is developed by the programmer/user. This technology reduces the cost and size of the devices. It also reduces the manual operation; finally it gives the automation products such as Home Appliances, Security systems, Satellite, Industries Automation and etc, Now a days to improve the efficiency of the process, people uses some new technologies, like RTOS (Real Time Operating System which gives deterministic and multitasking facilities), PROTOCOLs (such as I2C, SPI, CAN, LIN and TCP/IP which increase the speed of the process). Major part of this Project is Embedded controller, Holtek IR remote, & Mobile. Here Mobile act as an Administrator. In this project we can be controlled by certain things such as all Electronics and Electrical devices in
industry through Holtek IR remote. Previous days it’s not possible to control through Mobile. Nowadays it’s possible because of Holtek IR remote.
BLOCK DIAGRAM:
Industry/Home 1-IM MOTOR
RELAY DRIVER
DEVICE 2
UNIT
DEVICE 3
REMOTE
POWER SUPPLY UNIT
DESCRIPTION:
Three Phase
In this project we can be controlled by certain things such as all Electronics and Electrical devices in industry through Holtek IR remote. Holtek transmitter
and receiver are
act as
a holtek remote.Holtek transmitter
transmit some valuable message to controller through holtek receiver. Controller controls some specified application, based on the Message .some messages like ON and OFF, STOP and START etc.
HARDWARE REQUIREMENT: ➢ Microcontroller ➢ IR TX/RX ➢ Power supply Unit ➢ Display unit
SOFTWARE REQUIREMENT: ➢ KEIL-C Cross Compiler ➢ uC-FLASH Hex Up-loader
ABSTRACT:
Embedded system is the one of the firmware that is combination of software and hardware. Here the software is encapsulated in the hardware. In embedded system entire hardware is monitored and controlled by the software which is developed by the programmer/user. This technology reduces the cost and size of the devices. It also reduces the manual operation; finally it gives the automation products such as Home Appliances, Security systems, Satellite, Industries Automation and etc, Now a days to improve the efficiency of the process, people uses some new technologies, like RTOS (Real Time Operating System which gives deterministic and multitasking facilities), PROTOCOLs (such as I2C, SPI, CAN, LIN and TCP/IP which increase the speed of the process). Major part of this Project is Embedded controller, Holtek IR remote, & Mobile. Here Mobile act as an Administrator. In this project we can be controlled by certain things such as all Electronics and Electrical devices in
industry through Holtek IR remote. Previous days it’s not possible to control through Mobile. Nowadays it’s possible because of Holtek IR remote.
BLOCK DIAGRAM:
Industry/Home 1-IM MOTOR
RELAY DRIVER
DEVICE 2
UNIT
DEVICE 3
REMOTE
POWER SUPPLY UNIT
DESCRIPTION:
Three Phase
In this project we can be controlled by certain things such as all Electronics and Electrical devices in industry through Holtek IR remote. Holtek transmitter
and receiver are
act as
a holtek remote.Holtek transmitter
transmit some valuable message to controller through holtek receiver. Controller controls some specified application, based on the Message .some messages like ON and OFF, STOP and START etc.
HARDWARE REQUIREMENT: ➢ Microcontroller ➢ IR TX/RX ➢ Power supply Unit ➢ Display unit
SOFTWARE REQUIREMENT: ➢ KEIL-C Cross Compiler ➢ uC-FLASH Hex Up-loader
Related Documents
