Astm A36 Composition

Physical Properties Density Mechanical Properties Tensile Strength, Ultimate Tensile Strength, Yield Elongation at Break Modulus of Elasticity Bulk Modulus Poissons Ratio Shear Modulus Material Components Properties Carbon, C Copper, Cu Iron, Fe Manganese, Mn Phosphorous, P Silicon, Si Sulfur, S References for this datasheet.

7.85 g/cc

English 0.284 lb/in³

Metric 400 - 550 MPa English 250 MPa 58000 - 79800 psi 20.00% 36300 psi 23.00% 20.00% 200 GPa 23.00% 140 GPa 29000 ksi 0.26 20300 ksi 79.3 GPa 0.26 11500 ksi Metric 0.250 - 0.290 % English 0.20% 98.00% 1.03% <= 0.0400 % 0.28% <= 0.0500 %

0.250 - 0.290 % 0.20% 98.00% 1.03% <= 0.0400 % 0.28% <= 0.0500 %

Comments Typical of ASTM Steel Comments

in 200 mm In 50 mm. Typical for steel

Comments

Mechanical Properties Tensile Strength, Ultimate Tensile Strength, Yield Elongation at Break Bulk Modulus Shear Modulus

Metric 450 MPa 345 MPa 21.00% 140 GPa 80.0 GPa

Material Components Properties Carbon, C Iron, Fe Manganese, Mn Phosphorous, P Silicon, Si Sulfur, S

Metric

English Comments 65300 psi 50000 psi 21.00% In 50 mm 20300 ksi Typical for steel 11600 ksi Typical for steel English

0.23% 0.23% 98.00% 98.00% 1.35% 1.35% <= 0.0400 % <= 0.0400 % <= 0.300 % <= 0.300 % <= 0.0500 % <= 0.0500 %

Comments