Amar (autorecovered).docx

KARPAGAM POLYTECHNIC COLLEGE COIMBATORE-21

DIPLOMA IN MECHANICAL ENGINEERING (FULL TIME) PROJECT WORK TOPIC: MULTI PURPOSE AGRI CUTTER MACHINE GROUP MEMBERS SL.NO

NAME OF THE STUDENTS

REGISTER NUMBER

1 2 3 4 5

PRABHU.M ABILASH.P AMARNATH.T ARUL PRAKASH.K ASHOK.R

16218237 17214758 17214759 17214764 17214765

UNDER THE GUIDANCE OF Name of the faculty

:

Designation

:

Department

:

Signature of the Guide:

Signature of the HOD:

AIM Multi-Purpose Agri Cutter is designed mainly for agricultural purposes.

OBJECTIVES We are using the multi agricultural cutter for cutting the crops, sugarcane, wooden materials and etc. It consists of a motor and rotating disc arrangement connected to a blade cutter. Thus the cutting process is carried out through this machine.

WORKING PRINCIPAL Multi-Purpose Agri Cutter is designed mainly for agricultural purposes. We are using the multi agricultural cutter for cutting the crops, sugarcane, wooden materials and etc. It consists of a motor and rotating disc arrangement connected to a blade cutter. Here we use an induction motor whose shaft is coupled to a big size pulley connected to a rotating disc. The rotating disc arrangement acts like a cam. The cutters are fixed to the other end of the ram arrangement. When we switch ON the machine the motor start to rotate the cam arrangement. Here the rotary motion is converted in to the linear motion and cutter is

moved upward and downward repeatedly. Thus the cutting process is carried out through this machine.

APPLICATION  Multipurpose agri-cutter machine is a very useful device which is very simple in construction.  It is used to maintain and upkeep lawns in gardens, schools, college's part etc.  We have made some changes in the existing machine to make its application easier at reduced cost.  Our main aim in pollution control is attained through this.

ADVANTAGES 1. 2. 3. 4.

Low cost. Portable. Reliable. Easy to use – system is very easy to understand.

CONCLUSION The project on which we are working is working with easy and efficient way. We able to fetch out the wastage material from the multi-purpose cutter machine. COST ESTIMATION SL NO

DESCRIPTION

COST(RS)

1

Raw material cost

1500.00

2

Machining cost

2000.00

3

Fabrication cost

500.00

4

Design / Typing work

500.00

5

Finishing cost

500.00

6

Transport cost

500.00

7

Miscellaneous

500.00

8

Total cost

6000.00

DIAGRAM