Adjustable Necklace

Free DIY Lesson E a s y To M a k e & P r o u d To W e a r

Adjustable Necklace 【Material】 Glass Bead silver/6/0 ( item no. 129997 )

2 pcs

Metal Beads Black

6 pcs

Black Glass Beads (item no. 345165)

9 pcs

Stringing wire 0.38mm 110 cm

1 pcs

Jump ring 4mm

6 pcs

Clasp set

2 pcs

Crimp

18 pcs

Necklace Chain (item no. 269969) 22 cm

2 pcs

【Tools】 Cutter Pliers, Long Nose Pliers

【Instruction】

jumpring

Necklace Chain 22cm x 2pcs

jumpring

Clasp

Step 1

Combine two pieces 22cm necklace chain together with jumprings, and clasp set at the end as shown. This part make the necklace adjustable. You can wear this necklace long or short whichever you like. Just connect step 1 and 2 together with the clasp set, then it becomes a long necklace. Vice versa.

start here Clasp

jumpring x 3pcs

2.5cm

crimp

Black glass bead

Black glass bead

4cm

3cm

glass bead 6/0

Metal bead

4.5cm

2cm

3cm 4.5cm 2cm

4cm

Black glass bead

1c

m

2.5cm 4cm 1cm

3.5cm

Step 2

-Combine three jumprings and clasp together. Take the stringing wire and thread through the last jumpring, position it to the middle of the wire, then thread both ends into a crimp. Make sure the crimp is at the end of the wire, squeeze the crimp with long nose pliers. - Follow the graphic (above), thread the beads as shown. Squeeze the crimps at each indicated position with long nose pliers.

Skill Level

Approximate Crafting Time: 1.0~1.5 hours

1

Designed by Jennifer Howe, www.ecstaticjewelry.com

**Please do not duplicate, loan, distribute, or mass produce. Each lesson is made from our heart and every project is designed with our passion. Please respect our intellectual property and thank you for your cooperation.