93

Mini Round Railing Clamps with Radius Base NEW!

Mini Round Railing Clamps with Flat Base NEW!

• • • •

• • • •

For 1/4" (6 mm) Thick Glass Fits 1" (25 mm) Diameter Tubing No Hole Drilling; Pressure Fit Ideal for Small Glass Barriers

AVAILABLE IN BRUSHED STAINLESS AND POLISHED STAINLESS STEEL Product Code

C-MRR

For 1/4" (6 mm) Thick Glass For Mounting to Flat Surfaces No Hole Drilling; Pressure Fit Ideal for Small Glass Barriers

AVAILABLE IN BRUSHED STAINLESS AND POLISHED STAINLESS STEEL Product Code C-MRF 1-1/16" (27 mm)

1-1/16" (27 mm)

7/16" (11 mm)

11/32" (9 mm) 19/32" (15 mm)

1-5/32" (29.5 mm)

Base View

Front View

Rear View

Base View

Side View

Stair and Walkway Railing Clamps

NEW!

AVAILABLE IN POLISHED CHROME, POLISHED BRASS, AND SATIN NICKEL (BRUSHED) Acute

3/8" Clamps 25/64" (10 mm)

Obtuse

A

C

B

Angle Open Both Ends

Closed on Acute Angle End

Closed on Obtuse Angle End

52 Degree Slant Acute End Clamp "A" Use Slant Acute End Clamps on top of glass at high end of slant, or bottom of glass at low end of slant. Clamps at 52 degree angle for use with 3/8" or 1/2" (10 or 12 mm) thick glass. 1-7/8" (47 mm)

41/64" (16 mm)

33/64" (13 mm)

E

Product Code

B A

D

E

E

3/4" (19 mm)

D

D

A: Acute End Clamp for Slanted Railings B: Open Center Clamp for Slanted Railings C: Obtuse End Clamp for Slanted Railings D: Straight End Clamp for Level Railings E: Straight Open Center Clamp for Level Railings

128 Degree Slant Obtuse End Clamp "C" Use Slant Obtuse End Clamps on bottom of glass at high end of slant, or top of glass at low end of slant. Clamps at 128 degree angle for use with 3/8" or 1/2" (10 or 12 mm) thick glass. Product Code Product Code

C-S128E-12 C-S128E-38

for 1/2" (12 mm) for 3/8" (10 mm)

52 Degree Slant Open Center Clamp "B" Use Slant Open Center Clamps on top or bottom midpoint of slanted glass. Reversible center clamps at 52 degree angle for use with 3/8" or 1/2" (10 or 12 mm) thick glass. 1-7/8" (47 mm)

1-7/8" (47 mm)

7/16" (11 mm)

7/16" (11 mm) Product Code

D

Side View

C

C

Straight Open Both Ends

Rear View

1/2" Clamps B

Reversible Closed One End

Front View

1-7/8" (47 mm)

A

D

1-5/32" (29 mm)

19/32" (15 mm)

1-7/8" (47 mm)

C-S52E-12 C-S52E-38

90 Degree Straight End Clamp "D"

90 Degree Straight Open Center Clamp "E"

Use Straight End Clamps on top of glass at end of level run, or bottom of glass at end of level run. Clamps are reversible with 90 degree corners for use with 3/8" or 1/2" (10 or 12 mm) thick glass.

Use Straight Open Center Clamps on top or bottom midpoint of glass on level run. Reversible open center clamps for use with 3/8" or 1/2" (10 or 12 mm) thick glass. 1-7/8" (47 mm)

1-7/8" (47 mm) 1-7/8" (47 mm)

7/16" (11 mm)

for 1/2" (12 mm) Product Code C-S52O-12 for 1/2" (12 mm) for 3/8" (10 mm) Product Code C-S52O-38 for 3/8" (10 mm)

1-7/8" (47 mm)

1-7/8" (47 mm) 3/8" (10 mm)

3/8" (10 mm) Product Code Product Code

C-S90E-12 C-S90E-38

for 1/2" (12 mm) for 3/8" (10 mm)

Product Code Product Code

C-S90O-12 C-S90O-38

for 1/2" (12 mm) for 3/8" (10 mm)

Note: Complete the above product codes by adding the desired finish code to the end.

ushorizon.com • Toll Free Phone (877) 728-3874 • Toll Free Fax (888) 440-9567

93