80m1 Drilling Rig
This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA
Overview
Download & View 80m1 Drilling Rig as PDF for free.
More details
- Words: 248
- Pages: 1
A60/80M1 drilling rig Technical specification
Order of production
A60/80M1 drilling rig is designed for oil and gas well completion and repair, drilling by rotary tables and bottomhole motors. Rig is mounted on BAZ-690902 all-wheel drive chassis. Conditional well depth at repair and completion is 4000 meters (drilling is carried out by tubing 14 kg/m). Conditional well depth at drilling is 2000 meters (drilling is carried out by tubing 24 kg/m). Design characteristics:
•
single-drum winch with disk pneumatic clutches, which allow to switch from one range of speed to another and not require additional air compressed unit;
•
drilling drum with Lebus's tracks which provide even rope reel-in;
•
oil-filled reduction gear;
•
hydromatic brake with regulated braking torque;
•
230 mm width brake shoes from fixed drilling rig;
•
extension of upper section by hydraulic drive winch from remote control console;
•
hydraulic drive winch for auxiliary works;
•
two-way action hydraulic jacks (outriggers) with 800 mm stroke;
•
reversing reduction gear of rotary table drive;
•
band brake of rotary table drive with pneumatic drive;
•
torque and rotary-table rotation frequency indicator;
•
possibility of installation of wellhead area at a height of 2 m (rotary table drive - cardan shaft) and 3 m (rotary table drive - cardan shaft and vertical chain reduction gear);
•
possibility to work with admissible load capacity without guy lines installation on the ground;
•
emergency electric drive;
•
basic equipment subject to prevailing functions and technological features of work.
Order of production
A60/80M1 drilling rig is designed for oil and gas well completion and repair, drilling by rotary tables and bottomhole motors. Rig is mounted on BAZ-690902 all-wheel drive chassis. Conditional well depth at repair and completion is 4000 meters (drilling is carried out by tubing 14 kg/m). Conditional well depth at drilling is 2000 meters (drilling is carried out by tubing 24 kg/m). Design characteristics:
•
single-drum winch with disk pneumatic clutches, which allow to switch from one range of speed to another and not require additional air compressed unit;
•
drilling drum with Lebus's tracks which provide even rope reel-in;
•
oil-filled reduction gear;
•
hydromatic brake with regulated braking torque;
•
230 mm width brake shoes from fixed drilling rig;
•
extension of upper section by hydraulic drive winch from remote control console;
•
hydraulic drive winch for auxiliary works;
•
two-way action hydraulic jacks (outriggers) with 800 mm stroke;
•
reversing reduction gear of rotary table drive;
•
band brake of rotary table drive with pneumatic drive;
•
torque and rotary-table rotation frequency indicator;
•
possibility of installation of wellhead area at a height of 2 m (rotary table drive - cardan shaft) and 3 m (rotary table drive - cardan shaft and vertical chain reduction gear);
•
possibility to work with admissible load capacity without guy lines installation on the ground;
•
emergency electric drive;
•
basic equipment subject to prevailing functions and technological features of work.
Related Documents
80m1 Drilling Rig
October 2019 11
Zj15 Drilling Rig Parts Manual.pdf
December 2019 12
Rig As
June 2020 2
Rig Veda
June 2020 12