2003 9-5 Headlamp Removal
This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA
Overview
Download & View 2003 9-5 Headlamp Removal as PDF for free.
More details
- Words: 342
- Pages: 7
3. Electrical System\Lighting a...
Adjustment/Replacement - Head...
Headlamps To remove
1. Remove the centre grille as follows: 1.A. Lift slightly to release the bottom edge. 1.B. Pull it down and forwards to release the spring clip.
2.
Remove the side grille from the back by bending up the lower clips to release them. Lift away the side grille.
9-5 (9600) 3 2003
1
3. Electrical System\Lighting a...
Adjustment/Replacement - Head...
3. LH: Remove the top of the battery cover. 4.
Press down the snap fastener and detach the direction indicator.
9-5 (9600) 3 2003
2
3. Electrical System\Lighting a...
Adjustment/Replacement - Head...
5. Unplug the direction indicator connector and remove the direction indicator. 6. Remove the protective cover on the lamp to facilitate removing the headlamp. 7.
Remove the screws and clip.
9-5 (9600) 3 2003
3
3. Electrical System\Lighting a...
Adjustment/Replacement - Head...
8. Lift out the headlamp slightly to facilitate unplugging the lamp connector. 9. Unplug the connector and lift away the headlamp.
To fit
1.
Position the headlamp drain hose so that it point downward. Important Make sure the headlamp drain hose is not pinched. The hose must not be kinked.
9-5 (9600) 3 2003
4
3. Electrical System\Lighting a...
Adjustment/Replacement - Head...
2. Spray with "Kontakt 61" and plug in the connector. Fit the headlamp at an angle towards the mounting. Press the clip onto the front wing.
9-5 (9600) 3 2003
5
3. Electrical System\Lighting a...
Adjustment/Replacement - Head...
3. Fit the screws to secure the headlamp. 4. Fit the protective cover on the lamp. 5. Plug in the direction indicator.
6. Place the direction indicator so that the three guide pins are correctly located. Press on the direction indicator, making sure the clip fastens properly. 7.
Fit the side grille and centre grille by pressing them back in position.
9-5 (9600) 3 2003
6
3. Electrical System\Lighting a...
Adjustment/Replacement - Head...
8. LH: Fit the top of the battery cover. 9. Check headlamp alignment and adjust as necessary, see Headlamp adjustment.
9-5 (9600) 3 2003
7
Adjustment/Replacement - Head...
Headlamps To remove
1. Remove the centre grille as follows: 1.A. Lift slightly to release the bottom edge. 1.B. Pull it down and forwards to release the spring clip.
2.
Remove the side grille from the back by bending up the lower clips to release them. Lift away the side grille.
9-5 (9600) 3 2003
1
3. Electrical System\Lighting a...
Adjustment/Replacement - Head...
3. LH: Remove the top of the battery cover. 4.
Press down the snap fastener and detach the direction indicator.
9-5 (9600) 3 2003
2
3. Electrical System\Lighting a...
Adjustment/Replacement - Head...
5. Unplug the direction indicator connector and remove the direction indicator. 6. Remove the protective cover on the lamp to facilitate removing the headlamp. 7.
Remove the screws and clip.
9-5 (9600) 3 2003
3
3. Electrical System\Lighting a...
Adjustment/Replacement - Head...
8. Lift out the headlamp slightly to facilitate unplugging the lamp connector. 9. Unplug the connector and lift away the headlamp.
To fit
1.
Position the headlamp drain hose so that it point downward. Important Make sure the headlamp drain hose is not pinched. The hose must not be kinked.
9-5 (9600) 3 2003
4
3. Electrical System\Lighting a...
Adjustment/Replacement - Head...
2. Spray with "Kontakt 61" and plug in the connector. Fit the headlamp at an angle towards the mounting. Press the clip onto the front wing.
9-5 (9600) 3 2003
5
3. Electrical System\Lighting a...
Adjustment/Replacement - Head...
3. Fit the screws to secure the headlamp. 4. Fit the protective cover on the lamp. 5. Plug in the direction indicator.
6. Place the direction indicator so that the three guide pins are correctly located. Press on the direction indicator, making sure the clip fastens properly. 7.
Fit the side grille and centre grille by pressing them back in position.
9-5 (9600) 3 2003
6
3. Electrical System\Lighting a...
Adjustment/Replacement - Head...
8. LH: Fit the top of the battery cover. 9. Check headlamp alignment and adjust as necessary, see Headlamp adjustment.
9-5 (9600) 3 2003
7
