gus 1c82-a0k5-19e5-maax-400e-3x08-**** windows xp 6.0 ia32 winaspi: nt-spti used nero version: 7.10.1.0 internal version: 7, 10, 1, 0 recorder: 7.10.1.0 adapter driver: drive buffer : bus type : cd-rom: 7.10.1.0 adapter driver:
version: sb01 - ha 1 ta 1 ha 1 2048kb default (0) -> atapi, detected: ? version: sb01 - ha 1 ta 1
ha 1
=== scsi-device-map === cdromperipheral : yn3501x apn803y off === cdrom-device-map === hl-dt-st dvdram gsa-4120b yn3501x apn803y tsstcorp cd/dvdw sh-s183l =======================
x: y: z:
1.0
adr9b4wr port 10 id 0
cdrom0 cdrom2 cdrom1
autorun : 1 excluded drive ids: writebuffersize: 83886080 (0) byte bufe : 0 physical memory : 2046mb (2095548kb) free physical memory: 1014mb (1038620kb) memory in use : 50 % uncached pfiles: 0x0 use inquiry : 1 global bus type: default (0) check supported media : disabled (0) 13.1.2008 burn dvd image 23:41:25 #1 text 0 file scsipticommands.cpp, line 424 lockmcn - completed sucessfully for ioctl_storage_mcn_control 23:41:25 #2 text 0 file burncd.cpp, line 3508 turn on disc-at-once, using dvd media 23:41:26 #3 text 0 file dlgwaitcd.cpp, line 307 last possible write address on media: 4173823 (927:30.73, 8151mb) last address to be written: 3885551 (863:27.26, 7588mb) 23:41:26 #4 text 0 file dlgwaitcd.cpp, line 319 write in overburning mode: no (enabled: cd)
dma:
23:41:26 #5 text 0 file dlgwaitcd.cpp, line 2972 recorder: tsstcorp cd/dvdw sh-s183l, media type: dvd+r9 double layer disc manufacturer id: mkm, media type id: 001, product revision number: 0 disc application code: 0, extended information indicators: 0 23:41:26 #6 text 0 file dlgwaitcd.cpp, line 493 >>> protocol of dlgwaitcd activities: <<< ========================================= 23:41:26 #7 text 0 file threadedtransferinterface.cpp, line 793 setup items (after recorder preparation) 0: trm_data_mode1 (2 - cd-rom mode 1, joliet) 2 indices, index0 (150) not provided original disc pos #0 + 3885552 (3885552) = #3885552/863:27.27 not relocatable, disc pos for caching/writing not required/not required -> trm_data_mode1, 2048, config 0, wanted index0 0 blocks, length 3885552 blocks [z: tsstcorp cd/dvdw sh-s183l] -------------------------------------------------------------23:41:26 #8 text 0 file threadedtransferinterface.cpp, line 995 prepare [z: tsstcorp cd/dvdw sh-s183l] for write in cue-sheet-dao dao infos: ========== mcn: "" toctype: 0x00; session closed, disc fixated tracks 1 to 1: idx 0 idx 1 next trk 1: trm_data_mode1, 2048/0x00, filepos 0 0 7957610496, isrc "" dao layout: =========== ___start_|____track_|_idx_|_ctrladr_|_____size_|______nwa_| _recdep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 3885552 | 3885552 | 0x00 3885552 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 23:41:26 #9 text 0 file scsipticommands.cpp, line 215 sptilockvolume - completed successfully for fsctl_lock_volume 23:41:26 #10 text 0 file burncd.cpp, line 4294 caching options: cache cdrom or network-yes, small files-no (<64kb) 23:41:26 #11 phase 24 file dlgbrnst.cpp, line 1762 caching of files started 23:41:26 #12 text 0 file burncd.cpp, line 4413 cache writing successful. 23:41:26 #13 phase 25 file dlgbrnst.cpp, line 1762 caching of files completed 23:41:26 #14 phase 36 file dlgbrnst.cpp, line 1762 burn process started at 2.4x (3 324 kb/s) 23:41:26 #15 text 0 file threadedtransferinterface.cpp, line 2721 verifying disc position of item 0 (not relocatable, no disc pos, no patch
infos, orig at #0): write at #0 23:41:26 #16 text 0 file dvdplusduallayer.cpp, line 494 disc finalized, lba total image size: 3885552 (7588mb), last lba l0: 1942783 (3794mb) 23:42:04 #17 spti -1066 file scsipassthrough.cpp, line 179 cdrom1: scsistatus(x02) winerror(0) neroerror(-1066) sense key: 0x05 (key_illegal_request) sense code: 0x24 sense qual: 0x00 cdb data: 0xad 00 00 00 00 00 00 21 08 04 00 00 sense area: 0x70 00 05 00 00 00 00 0a 00 00 00 00 24 buffer x07bc9ac0: len x804 23:42:04 #18 text 0 file dvdplusduallayer.cpp, line 659 l0 data zone capacity set to 1942784 (1da500h, 3794mb) -> ok, confirmed setting 23:42:04 #19 cdr -1205 file dvdplusduallayer.cpp, line 686 burning layer 1 23:42:04 #20 text 0 file dvdplusduallayer.cpp, line 696 start writing layer 1 at address 0 (0h) recording mode: unknown recording mode 23:42:04 #21 text 0 file cdrdrv.cpp, line 9872 ---- disc structure: physical format information (00h) ---media type: 0, layer: 0, address: 0 (0 h), agid: 0; length: 2050 book type: dvd+r dl (14), part version: 1.0x (1) disc size: 120 mm, maximum rate: <not specified> (f h) number of layers: 2, track path: opposite track path (otp), layer type: recordable linear density: 0,293 um/bit, track density: 0,74 um/track starting physical sector number of data area: 30000 h (dvd-rom, dvd-r/-rw, dvd+r/+rw) end sector number in layer 0: 22d7ff h (lbn: 1fd7ff h, 4075 mb) data in burst cutting area (bca) does not exist disc application code: 0 / 0 h extended information indicators: 0 h disc manufacturer id: mkm..... media type id: 001 product revision number: 0 number of physical format information bytes in use in adip up to byte 63: 64 media specific [16..63]: 00 00 00 4d 4b 4d 00 00 - 00 00 00 30 30 31 00 40 ...mkm.....001.@ 25 25 37 0c 02 2f 63 02 - 2f 63 21 23 0d 0e 14 14 %%7../c./c!#.... 02 01 01 10 00 21 23 0d - 0e 14 14 02 01 01 10 00 .....!#......... 23:42:04 #22 text 0 file cdrdrv.cpp, line 9872 ---- disc structure: physical format information (00h) ---media type: 0, layer: 0, address: 0 (0 h), agid: 0; length: 2050 book type: dvd+r dl (14), part version: 1.0x (1) disc size: 120 mm, maximum rate: <not specified> (f h) number of layers: 2, track path: opposite track path (otp), layer type: recordable
linear density: 0,293 um/bit, track density: 0,74 um/track starting physical sector number of data area: 30000 h (dvd-rom, dvd-r/-rw, dvd+r/+rw) end sector number in layer 0: 22d7ff h (lbn: 1fd7ff h, 4075 mb) data in burst cutting area (bca) does not exist disc application code: 0 / 0 h extended information indicators: 0 h disc manufacturer id: mkm..... media type id: 001 product revision number: 0 number of physical format information bytes in use in adip up to byte 63: 64 media specific [16..63]: 00 00 00 4d 4b 4d 00 00 - 00 00 00 30 30 31 00 40 ...mkm.....001.@ 25 25 37 0c 02 2f 63 02 - 2f 63 21 23 0d 0e 14 14 %%7../c./c!#.... 02 01 01 10 00 21 23 0d - 0e 14 14 02 01 01 10 00 .....!#......... 23:42:04 #23 text 0 file cdrdrv.cpp, line 9872 ---- disc structure: physical format information (00h) ---media type: 0, layer: 0, address: 0 (0 h), agid: 0; length: 2050 book type: dvd+r dl (14), part version: 1.0x (1) disc size: 120 mm, maximum rate: <not specified> (f h) number of layers: 2, track path: opposite track path (otp), layer type: recordable linear density: 0,293 um/bit, track density: 0,74 um/track starting physical sector number of data area: 30000 h (dvd-rom, dvd-r/-rw, dvd+r/+rw) end sector number in layer 0: 22d7ff h (lbn: 1fd7ff h, 4075 mb) data in burst cutting area (bca) does not exist disc application code: 0 / 0 h extended information indicators: 0 h disc manufacturer id: mkm..... media type id: 001 product revision number: 0 number of physical format information bytes in use in adip up to byte 63: 64 media specific [16..63]: 00 00 00 4d 4b 4d 00 00 - 00 00 00 30 30 31 00 40 ...mkm.....001.@ 25 25 37 0c 02 2f 63 02 - 2f 63 21 23 0d 0e 14 14 %%7../c./c!#.... 02 01 01 10 00 21 23 0d - 0e 14 14 02 01 01 10 00 .....!#......... 23:42:04 #24 text 0 file dvdr.cpp, line 8372 drive: tsstcorp cd/dvdw sh-s183l book type request [tsst]: dvd-rom changing the book type was finished successfully, return code 0 23:42:04 #25 cdr -1207 file dvdr.cpp, line 6477 book type automatically set to: dvd-rom 23:42:04 #26 text 0 file dvdplusrw.cpp, line 675 start write address at lba 0 dvd high compatibility mode: yes 23:42:04 #27 text 0 file threadedtransfer.cpp, line 269 pipe memory size 83836800
0:01:50 #28 cdr -1206 file dvdplusduallayer.cpp, line 1969 burning layer 2 0:01:50 #29 text 0 file dvdplusduallayer.cpp, line 1980 perform layer 1 to 2 jump before writing at address 1942784 (1da500h) 0:21:33 #30 text 0 file writerstatus.cpp, line 113 start writing lead-out at lba 3885552 (3b49f0h), length 0 blocks 0:22:34 #31 text 0 file dvdplusrw.cpp, line 935 enddao: last written address 3885552 0:22:34 #32 phase 37 file dlgbrnst.cpp, line 1762 burn process completed successfully at 2.4x (3 324 kb/s) 0:22:34 #33 phase 78 file dlgbrnst.cpp, line 1762 data verification started 0:22:37 #34 text 0 file threadedtransfer.cpp, line 269 pipe memory size 590400 0:39:20 #35 phase 80 file dlgbrnst.cpp, line 1762 data verification completed successfully 0:39:21 #36 text 0 file scsipticommands.cpp, line 261 sptidismountvolume - completed successfully for fsctl_dismount_volume 0:39:25 #37 text 0 file cdrdrv.cpp, line 11185 drivelocker: unlockvolume completed 0:39:25 #38 text 0 file scsipticommands.cpp, line 424 unlockmcn - completed sucessfully for ioctl_storage_mcn_control existing drivers: registry keys: hklm\software\microsoft\windows nt\currentversion\winlogon