X-ray Developing Tanks

X-Ray Developing Tanks

X-Ray Developing Tanks Models DT-2, DT-3 & DT-5 Shown from Left to Right: Model DT-2 & DT-5

Product photo/image above may show some available options

X-ray Developing Tanks are used in the medical facility in the process of developing x-ray film.

Model DT-2 is recommended for podiatry practices. The master tank is 16"L x 13"W x 17-1/2"D. The master tank has a two gallon capacity. Two insert tanks accommodate hangers up to and including 10" x 12".

The master (external) tank is fabricated from heavy gauge type 316 stainless steel.

Model DT-3 is also recommended for podiatry practices. The master tank is also 16"L x 13"W x 17-1/2"D. The master tank has the capacity of three gallons. Two insert tanks accommodate hangers up to and including 10" x 12".

The legs, of type 304 stainless steel, is welded and polished to a satin finish. Insert tanks are suspended on racks inside the master developing tank, allowing full circulation of water around the sides and bottom. These insert tanks are secured by stainless steel tabs to prevent floating while filling the tank and are removable for cleaning.

Model DT-5 is suggested for larger medical facilities. The master tank is 19-1/2"L x 16-1/2"W x 22-1/2"D. The tank is capable of holding 5 gallons. Two insert tanks accommodate hangers up to and including 14" x 17".

Direct connections to the water supply and drain allows for a constant flow of fresh water, providing a cleaner wash area and better control of temperature. The tank is equiped with PVC fittings for inlet, drain and overflow connections. The overflow pipe maintains excess water and inhibits surface scum formation.

SPECIFICATION GUIDELINES Three models are available. Each model listed below includes as standard a developing tank with legs, two removable insert tanks, inlet fitting and combination drain and overflow assembly.

Whitehall Mfg. > P.O. Box 3527 > City of Industry, CA 91744 > (800) 782-7706 > (626) 968-6681 > FAX (626) 855-4862

DT

Last Update: 1/1/05

X-Ray Developing Tanks MODEL NUMBER AND OPTION SELECTIONS Series m DT

Suffix Options m -DTC-2 Master Tank Cover (for DT-2 or DT-3) m -DTC-5 Master Tank Cover (for DT-5) m -DR-1 Film Drying Rack

X-Ray Developing Tanks

Capacity m -2 2 gallons (holds up to 10" x 12" hangers) m -3 3 gallons (holds up to 10" x 12" hangers) m -5 5 gallons (holds up to 14" x 17" hangers)

m -IC-2 m -IC-3 m -IC-5 m -IT-2 m -IT-3 m -IT-5

Insert Cover (for DT-2 only) Insert Cover (for DT-3 only) Insert Cover (for DT-5 only) Insert Tank (for DT-2 only) Insert Tank (for DT-3 only) Insert Tank (for DT-5 only)

All dimension figures in parentheses are in millimeters.

All dimensions are nominal and subject to manufacturer’s change without notice. Whitehall assumes no responsibility for use of void or suspended data. © 2005 Whitehall Manufacturing, A Division of Acorn Engineering Company. Please visit www.whitehallmfg.com for most current specifications.

SELECTION SUMMARY & APPROVAL FOR MANUFACTURING Model Number & Options_____________________________________________ Quantity_____________ Company_________________________________________________________ Date___________________ Contact________________________________________________ Title______________________________ Approval for Manufacturing/Signature_______________________________________________________

Whitehall Mfg. > P.O. Box 3527 > City of Industry, CA 91744 > (800) 782-7706 > (626) 968-6681 > FAX (626) 855-4862

DT

Last Update: 1/1/05