Wg Reconfigurable Arbor Table Brochure

W A L L

G O L D F I N G E R

ARBOR RECONFIGURABLE TABLES Specification Guide Fourth Edition

SEMINAR

CONFERENCE

BOARDROOM

TRAINING

Arbor Reconfigurable Tables Specification Guide Fourth Edition 2011

Wall Goldfinger, Inc. Northfield, Vermont 05663

Contents Overviewiii TABLES AND CONFIGURATIONS1 Rectangular Tables4 Square Tables7 Racetrack Tables10 Special Tables12 MATERIALS15 Veneer16 Patterns22 Variations28 Dura-Bull Synthetic Leather30 Stone34 TABLE EDGES39 Inlay / Cross Banding42 Edge Types44 Edge Profiles46 Edge Details48 Standard Metal Finishes50 Premium Metal Finishes50 LEGS AND BASES53 Table Ganging56 “Toggle” Connectors56 Leg Placement56 Anderloc57 “Tuning Fork” Connector57 Table Legs58 Leg Finishes62 Folding Leg Mechanism63 Folding Legs / Bases63 Double Column Ganging Bar63 Bullnosed Base64 T-Base64 Custom Arch Base65 Offset T-Style Base65 Loop Leg66 Pedestal Base with Tilt Top67

ii | WALL GOLDFINGER, INC. | +1.802.485.6261 | WWW.WALLGOLDFINGER.COM

Pedestal Bases67 Stone Tilt-Top Table69 Split Folding Top Tables70 Folding Base Tables71 Leveling System72 Leveler Discs73 Leveler73 Locking Caster73 Levelers73 Leveling Caster73 TABLE ACCESSORIES75 Grommets78 Round Pass Through / Flange78 Solid Brass78 Plated Steel / Flush78 Wood Grommets78 Pass Through Access79 Table Top Hatches79 Single Door Access80 Double Door Access82 Communication84 Speaker Phone84 Microphones85 Power / Data Units87 Wire Management88 Modesty Panels91 Transport / Storage92 Table Top Storage Cart92 Vertical Table Top Storage Cart 92 Portable Leg Cart 92 Envelope Wrap93 Fitted Envelope93 APPENDIX95 Table Weights96 Publications98

Materials

Veneer Patterns

15 Veneer Stone Synthetic Leather

Bookmatch Slip Match Reverse Match Diamond Box Herringbone Sunburst Special

OVERVIEW

24

Table Ganging

56 Anderloc Leg Placement “Tuning Fork” Connector

Table Top Hatches

82

Single Door Double Door Stainless Steel Metal Box Frame

Power/Data

85

Lightweight Core

Table Edge

44

Types Profiles Details

Inlays / Cross Banding

42

Communication

82

Speaker Phones Microphones

Configurations Boardroom Training Conference Seminar

1

Table Legs Square Round Tapered Metal Steel Chrome T-Base

58

Wire Management

Levelers

72

External Hinged Door Raceway Column Guard

Discs Casters Locking

Table Storage

91

Leg Cart Table Cart Envelope Wrap

“Toggle” Connector

56

86

69

ARBOR SPECIFICATION GUIDE | INTRODUCTION | iv

TABLES AND CONFIGUR ATIONS

RECTANGLE

SQUARE

RACETRACK

SPECIAL FORMS

CONFIGURATIONS Individual Arbor tables are the building blocks that can be combined and recombined to create layouts that best support a particular meeting’s purpose. Arbor tables are typically simple geometric forms: rectangles, squares, half circles, and quarter circles. Used in 1-to-1 and 2-to-1 ratios, each table top can be combined into a variety of configurations to meet specific space and functional requirements. Arbor’s inherent lightweight and quick configurability also allow for arrangements to be easily changed when desired and stored when not in use.

2 | WALL GOLDFINGER, INC. | +1.802.485.6261 | WWW.WALLGOLDFINGER.COM

BOARDROOM

CLOSED BOARDROOM

Traditional rectangular boardroom layouts can be

The hollow square is an effective way to create excellent

achieved with Arbors ganged side to side or end to end/

communications around a table.

side to side.

OPEN BOARDROOM

SEMINARS AND TRAINING

A “U” shaped Arbor assembly is perfect for meetings

End to end Arbor connections are typically used in

in which the speaker or presenter wishes to interact

seminar and training situations. Arbor’s inherent light-

closely with the audience. Here we’ve added small

weight and quick reconfigurability are ideally suited to

square Arbor extensions to create a “C” shape.

these situation as changing classroom requirements can be easily accommodated.

ARBOR SPECIFICATION GUIDE | TABLES + CONFIGURATIONS | 3

RECTANGULAR TABLES

Rectangular Arbors, especially those using a 2-to-1 length to width ratio, can be assembled in several different ways: side to side, end to end, and side to end. These combinations can produce varying layouts, from large rectangles to hollow squares to long ranks.

DIMENSIONS

30” x 60”

33” x 66”

4 | WALL GOLDFINGER, INC. | +1.802.485.6261 | WWW.WALLGOLDFINGER.COM

36” x 72”

RECTANGULAR TABLES

A

B

C

D

E

F ARBOR SPECIFICATION GUIDE | TABLES + CONFIGURATIONS | 5

RECTANGULAR TABLES

6 | WALL GOLDFINGER, INC. | +1.802.485.6261 | WWW.WALLGOLDFINGER.COM

SQUARE TABLES

In some cases, square topped Arbors may be the best solution. Square tops are often used in dining areas or in multifunction areas where dining and conferencing are combined. Depending on the size of the top and the aesthetic requirements, it may be possible to use a cube style pedestal base rather than our toggle leg system.

DIMENSIONS

48” x 48”

60” x 60”

ARBOR SPECIFICATION GUIDE | TABLES + CONFIGURATIONS | 7

SQUARE TABLES

A

B

C

D

E

F

8 | WALL GOLDFINGER, INC. | +1.802.485.6261 | WWW.WALLGOLDFINGER.COM

SQUARE TABLES

ARBOR SPECIFICATION GUIDE | TABLES + CONFIGURATIONS | 9

RACETRACK TABLES

CIRCLE Arbors can be built as circles, half-circles and quarter circles. They can also be assembled to create circles or toroids. These use the same toggle legs and thus alleviate leg clearance issues by using shared legs at table joints.

10 | WALL GOLDFINGER, INC. | +1.802.485.6261 | WWW.WALLGOLDFINGER.COM

RACETRACK TABLES

OPEN CENTER Arbors can be used to great effect in a quarter circle format. These quadrants, either with a full radius edge or with a center scallop, can be used to create a variety of racetrack plans when used in conjunction with Arbor rectangles or squares.

ARBOR SPECIFICATION GUIDE | TABLES + CONFIGURATIONS | 11

SPECIAL TABLES

VIDEO CONFERENCING “Keystone” Arbors allow the creation of the “V” shapes so popular for video conferencing applications. Since the keystone is a custom shape, it can incorporate whatever angles are required to optimize sight lines or best utilize a particular space.

12 | WALL GOLDFINGER, INC. | +1.802.485.6261 | WWW.WALLGOLDFINGER.COM

SPECIAL TABLES

FREE FORM Configurations can be created using a combination of Arbor shapes and sizes. These free form arrangements provide the ultimate in design flexibility and are a great solution for spaces that require a truly custom solution.

ARBOR SPECIFICATION GUIDE | TABLES + CONFIGURATIONS | 13

14 | WALL GOLDFINGER, INC. | +1.802.485.6261 | WWW.WALLGOLDFINGER.COM

MATERIALS

VENEER

PATTERNS

DURA-BULL LEATHER

STONE

VENEER Made from slices of an individual tree, veneers are a popular choice to create uniquely beautiful designs that add warmth to any room. The unique characteristic of a veneer is a reflection of the type of tree, the way the tree was sliced and how the grain of the veneer slices are matched to create the final product. At Wall Goldfinger, we are known for our expertise in the selection and hand crafting of veneers. We offer more than 60 choices of veneer and because of our extensive experience and relationships, can source custom veneers upon request.

16 | WALL GOLDFINGER, INC. | +1.802.485.6261 | WWW.WALLGOLDFINGER.COM

ARBOR SPECIFICATION GUIDE | MATERIALS | 17

LIGHT

LIGHT

VENEER

QUARTERED FIDDLEBACK ENGLISH SYCAMORE

QUARTERED ASH

QUARTERED FIGURED MAPLE

QUARTERED FIGURED FRENCH ASH

PLAIN SLICED FIGURED MAPLE

PLAIN SLICED FIGURED FRENCH ASH

BIRDS EYE MAPLE

PLAIN SLICED MAPLE

BAMBOO SMALL KNUCKLE

QUARTERED MAPLE

PLAIN SLICED ANIGRE

PLAIN SLICED FIGURED ENGLISH SYCAMORE

QUARTERED PLAIN ANIGRE

QUARTERED FIGURED ENGLISH SYCAMORE

QUARTERED BLOCK MOTTLED ANIGRE

MEDIUM

PLAIN SLICED ASH

Illustrations are broadly representative of specific veneer types.

18 | WALL GOLDFINGER, INC. | +1.802.485.6261 | WWW.WALLGOLDFINGER.COM

MEDIUM

MEDIUM

VENEER

PLAIN SLICED PEARWOOD

QUARTERED FIDDLEBACK ANIGRE

QUARTERED PEARWOOD

RIFT RED OAK

QUARTERED FIGURED PEARWOOD

RIFT WHITE OAK

QUARTERED OKUME

QUARTERED CEYLON SATINWOOD BEE’S WING FIGURED

PLAIN SLICED CHERRY

QUILTED MAPLE

QUARTERED CHERRY

QUARTERED FLAKEY WHITE OAK

PLAIN SLICED FRENCH WALNUT

QUARTERED BEE’S WING EUCALYPTUS

QUARTERED ZEBRANO

MEDIUM DARK

QUARTERED FIGURED ANIGRE

Please review actual samples before making final selection.

ARBOR SPECIFICATION GUIDE | MATERIALS | 19

PLAIN SLICED MAKORE

QUARTERED BLOCK MOTTLED MAKORE

PLAIN SLICED MAHOGANY

QUARTERED ROPEY CHERRY

QUARTERED ETIMOE

PLAIN SLICED ROPEY CHERRY

QUARTERED MAHOGANY

QUARTERED SAPELE (RIBBON STRIPE)

QUARTERED AFRICAN MAHOGANY

SAPELE POMMELE

QUARTERED FIDDLEBACK MAKORE

MOABI POMMELE

QUARTERED BUBINGA

QUARTERED PLAIN MAKORE

KEVIZINGO

DARK

QUARTERED FIGURED MOZAMBIQUE

MEDIUM DARK

MEDIUM DARK

VENEER

Illustrations are broadly representative of specific veneer types.

20 | WALL GOLDFINGER, INC. | +1.802.485.6261 | WWW.WALLGOLDFINGER.COM

DARK

DARK

VENEER

QUARTERED BEE’S WING EUCALYPTUS

BAMBOO LARGE KNUCKLE

PLAIN SLICED WALNUT

QUARTERED FRENCH WALNUT

QUARTERED WALNUT

QUARTERED EAST INDIAN LAUREL

QUARTERED FIGURED WALNUT

QUARTERED EAST INDIAN ROSEWOOD

QUARTERED ENGLISH BROWN OAK

QUARTERED MACASSAR EBONY

QUARTERED WENGE

EBONIZED

Please review actual samples before making final selection.

ARBOR SPECIFICATION GUIDE | MATERIALS | 21

PATTERNS Wood veneer selection can be made on a vast range of design ideas. As a natural material and renewable resource wood veneer’s beauty comes from a variety of ways the veneer leaves are laid together and matched. While each species has unique characteristics, the way in which the wood is sliced will produce very different grain characteristics. Then there is how the panels are to be stained or dyed and ultimately finished. All these variations allow a myriad of design possibilities. As with our veneers, we offer a wide variety of patterns and can create custom patterns upon request.

22 | WALL GOLDFINGER, INC. | +1.802.485.6261 | WWW.WALLGOLDFINGER.COM

ARBOR SPECIFICATION GUIDE | MATERIALS | 23

PATTERNS

SLIP MATCH

REVERSE SLIP MATCH

BOOK MATCH

BOOK & BUTT MATCH

DIAMOND

REVERSE DIAMOND

24 | WALL GOLDFINGER, INC. | +1.802.485.6261 | WWW.WALLGOLDFINGER.COM

PATTERNS

BOX

REVERSE BOX

BLOCK

BASKETWEAVE

HERRINGBONE

‘V’ MATCH

ARBOR SPECIFICATION GUIDE | MATERIALS | 25

PATTERNS

CIRCLE — BOOKMATCH

CIRCLE — BOOK & BUTT

CIRCLE — WEAVE

CIRCLE — SUNBURST

26 | WALL GOLDFINGER, INC. | +1.802.485.6261 | WWW.WALLGOLDFINGER.COM

PATTERNS

SPECIAL 1

SPECIAL 2

WEDGE

ARBOR SPECIFICATION GUIDE | MATERIALS | 27

VARIATIONS

BOOKMATCH PATTERNS

A

B

C

D

E

F

G

H

I

K

L

BOX PATTERNS

J

28 | WALL GOLDFINGER, INC. | +1.802.485.6261 | WWW.WALLGOLDFINGER.COM

VARIATIONS

DIAMOND PATTERNS

M

N

O

P

Q

R

S

T

U

W

X

OTHER PATTERNS

V

ARBOR SPECIFICATION GUIDE | MATERIALS | 29

DURA-BULL SYNTHETIC LEATHER Dura-Bull synthetic leather combines the elegant appearance and touch of fine, soft glove leather with the durability and inherent stain resistance achieved through advanced technology. The same space-age chemistry used to develop bullet-proof glass and high performance aircraft components has been successfully applied to fiber and textile engineering to produce the outstanding characteristics of this material. The nylon fibers are laid down in a three-directional axis similar to the natural structure of collagen that is found in leather, resulting in superior durability. Its intrinsic strength makes DuraBull tear and puncture resistant, thus creating a material with considerable versatility, Dura-Bull can be used used for upholstery, desk inlays, or wall and panel applications. Because of the special finishing system, the color of DuraBull is an integral part of the material, permanently enriching it with a fresh appearance that will not fade or lose its beauty over time.

30 | WALL GOLDFINGER, INC. | +1.802.485.6261 | WWW.WALLGOLDFINGER.COM

ARBOR SPECIFICATION GUIDE | MATERIALS | 31

SYNTHETIC LEATHER

J1DE GELATO

J1DB NATURAL

J1D4 IVORY

J1K4 STUCCO

J1DA EGGSHELL

J1K3 GRAVEL

J1D2 BONE

J1L1 GREY

J1D3 RYE

J1K3 GRAVEL

J1F1 CAMEL

J1K1 TAUPE

J1G1 RUSSETT

J1L7 BEAVER

J1G2 SPANISH TILE

J1L6 OTTER Illustrations are broadly representative of specific leather types.

32 | WALL GOLDFINGER, INC. | +1.802.485.6261 | WWW.WALLGOLDFINGER.COM

SYNTHETIC LEATHER

J1L4 POND

J1J5 BORDEAUX

J1N2 DUSK

J1J1 BURGUNDY

J1N3 BLUE STONE

J1I3 CHARBROWN

J1P6 SAGE GREEN

J1I2 HERSHEY

J1P3 HUNTER GREEN

J1SC VIOLET

PLAIN SLICED ASH

J1C3 INDIGO

J1P1 PINE

J1C1 NAVY

J1L9 CINDER

J1A1 BLACK

Please review actual samples before making final selection.

ARBOR SPECIFICATION GUIDE | MATERIALS | 33

STONE Wall Goldfinger offers the ability to integrate stone for a truly custom look. We have an extensive network of stoneyards and work closely with the table designer and stoneyard to select the specific stone slabs for each project. We have included 32 of the top stone choices in this catalog. If you don’t see exactly what you want, let us know. Our extensive network of stoneyards allow us to source any stone upon request.

34 | WALL GOLDFINGER, INC. | +1.802.485.6261 | WWW.WALLGOLDFINGER.COM

ARBOR SPECIFICATION GUIDE | MATERIALS | 35

MARBLE

GRANITE

STONE

SEA FOAM

AMARELLO

TAILLON BLACK

AURISINA FIORITA

LABRADOR CHIARO

ROYAL GREEN

NEWTON BROWN

SAINT LAURENT

ATIBAIA

MISSISQUOI

CANADIAN RED

NAPOLEON GRAND MELANGE

ASH ROSE

PERLATO SICILIA

AMERICAN RED

KARIBIB Illustrations are broadly representative of specific stone types.

36 | WALL GOLDFINGER, INC. | +1.802.485.6261 | WWW.WALLGOLDFINGER.COM

QUARTZITE

LIMESTONE

STONE

CEDAR LIMESTONE

NIAGARA

JURA BEIGE

WHITE GOLD QUARTZITE

LAGOS BLUE HONED

VERDE AQUAMARINA

UNFADING MOTTLED GREEN & PURPLE

ST. PETER DARK

BLACK SPLIT FACE

CLASSIC HONED

UNFADING PURPLE

NOCE TRAVERTINE

BRAZILIAN GREEN HONED

GIALLO PERSIANO

SLATE

VERDE CACTUS

TRAVERTINE

IVORY ANTICO

Please review actual samples before making final selection.

ARBOR SPECIFICATION GUIDE | MATERIALS | 37

38 | WALL GOLDFINGER, INC. | +1.802.485.6261 | WWW.WALLGOLDFINGER.COM

TABLE EDGES

INLAY

PROFILES

EDGES

INLAYS AND EDGES Inlays, profiles and edges offer even more ways to create truly custom designs. Inlays and edges can be done in a variety of materials, including veneer, metal and stone.

40 | WALL GOLDFINGER, INC. | +1.802.485.6261 | WWW.WALLGOLDFINGER.COM

ARBOR SPECIFICATION GUIDE | TABLE EDGES | 41

INLAY / CROSS BANDING

A

B

C

D

E

F

G

H

I

42 | WALL GOLDFINGER, INC. | +1.802.485.6261 | WWW.WALLGOLDFINGER.COM

INLAY / CROSS BANDING

J

K

L

M

N

O

P

Q

R

ARBOR SPECIFICATION GUIDE | TABLE EDGES | 43

EDGE TYPES

A #100B (1½″ or 2″)

B #835B (1½″ or 2″)

C Bumper Edge (1½″ or 2″)

D Polished Stainless Steel Edge (1½″ or 2″)

44 | WALL GOLDFINGER, INC. | +1.802.485.6261 | WWW.WALLGOLDFINGER.COM

EDGE TYPES

E Brushed Aluminum Edge (1½″ or 2″)

F Statuary Bronze Edge (1½″ or 2″)

G Aluminum Unibody Edge (1½″ or 2″)

ARBOR SPECIFICATION GUIDE | TABLE EDGES | 45

EDGE PROFILES

A #100 (1½″ or 2″)

B #836 (1½″ or 2″)

C #572 (2″)

D #829 (2″)

46 | WALL GOLDFINGER, INC. | +1.802.485.6261 | WWW.WALLGOLDFINGER.COM

EDGE PROFILES

E #839 (2″)

F #836 (2″)

G #900 (1½″ or 2″)

ARBOR SPECIFICATION GUIDE | TABLE EDGES | 47

EDGE DETAILS

A ½″ × 2″ solid edge

B 2″ × 2″ solid edge

C ½″ × 2″ edge, and 2″ crossband

D 2″ × 2″ solid edge, brushed stainless steel ¼″ inlay

E ½″ × 2″ edge, 2” crossband, black ebony ¼″ inlay

F 2″ × 2″ solid edge, ¼″ statuary bronze

48 | WALL GOLDFINGER, INC. | +1.802.485.6261 | WWW.WALLGOLDFINGER.COM

EDGE DETAILS

G ½″ × 2″ dual edge

H ¼″ × 2″ brushed stainless steel edge

I ¼″ × 2″ brushed stainless steel edge

J ¼″ × 2″ brushed aluminum edge

K ¼″ × 2″ brushed statuary bronze edge

L ¼″ × 2″ aluminum unibody edge

ARBOR SPECIFICATION GUIDE | TABLE EDGES | 49

EDGE DETAILS

STANDARD METAL FINISHES

M ¼″ × 2″ powder coated Smoke Gray

SMOKE GRAY

MIST GRAY WRINKE

FLAT BLACK

CHATEAU BROWN WRINKLE

WESTERN BEIGE

AUBURN GRAY

GEORGIAN GRAY WRINKLE

OXFORD GRAY

BLACK WRINKLE

MAPLE BROWN

NEUTRAL LIGHT

CHARCOAL METALLIC

FOREST GREEN

NAVY

BURGUNDY

GUNMETAL

STARDUST

FOREST WHITE

N ¼″ × 2″ powder coated Neutral Light

PREMIUM METAL FINISHES

O ¼″ × 2″ powder coated Satin Chrome

BRUSHED STEEL

ANTIQUE BRONZE

SATIN CHROME

Illustrations are broadly representative of specific metal types. Please review actual samples before making final selection.

50 | WALL GOLDFINGER, INC. | +1.802.485.6261 | WWW.WALLGOLDFINGER.COM

ARBOR SPECIFICATION GUIDE | TABLE EDGES | 51

52 | WALL GOLDFINGER, INC. | +1.802.485.6261 | WWW.WALLGOLDFINGER.COM

LEGS AND BASES

GANGING

LEGS

T-BASES

PEDESTALS

LEGS AND BASES Because a table’s leg or base can be an important element of the overall table design, we also offer a wide variety of table leg and base selections. Our unique legs and pedestal bases do more than look good — they also function to support the fast and flexible reconfiguration and easy storage aspects of Arbor tables.

54 | WALL GOLDFINGER, INC. | +1.802.485.6261 | WWW.WALLGOLDFINGER.COM

ARBOR SPECIFICATION GUIDE | LEGS + BASES | 55

TABLE GANGING

“TOGGLE” CONNECTORS

LEG PLACEMENT

To attach legs to corner table plates: Insert plungers into

When pedestals or T-base legs are used, the Arbor legs

holes in the table plates. Flip the latches into the notches

are connected to table tops using the Wall Goldfinger

in the leg plate, locking the leg in place. To attach two

“Toggle” connector. The leg fastens to the table top with

tables with one leg: Align the tables so that plates or half-

four latches. There is no loose hardware. Legs can be set

plates are opposite each other. Insert plungers into holes

up the standard way of four to a table at the corners (left

in the table plates. Flip the latches into the notches in the

column), or they can be placed between two or four tops

leg plate, to level the tops to each other as well as locking

(right column), acting as a leveling and ganging device.

the leg in place. The system can also be used to gang 3 or 4 tops together using a single leg.

56 | WALL GOLDFINGER, INC. | +1.802.485.6261 | WWW.WALLGOLDFINGER.COM

TABLE GANGING

ANDERLOC When pedestals or T-base legs are used, the Anderloc spans between tables and gangs them together, helping to align multiple table configurations.

“TUNING FORK” CONNECTOR Our low profile “tuning fork” connector allows for easy connection of multiple tables without tools. Simply thread the open notch into the bolt on the adjoining table and turn to tighten. When not in use the tuning fork connector remains attached to the table, thus reducing the risk of any lost parts.

ARBOR SPECIFICATION GUIDE | LEGS + BASES | 57

TABLE LEGS

A ROUND

B ROUND FLUTED

C SQUARE

D SQUARE FLUTED

3″ diameter

3″ diameter

3″ square

3″ square

27¾″ height

27¾″ height

27¾″ height

27¾″ height

¾″ leveler

¾″ leveler

Leveler options

Leveler options

Square leg series available with raceway wire management | Variety of woods available: Maple, cherry, Honduras mahogany, walnut, and specials | See Accessories for table legs featuring wire management and levelers/casters

58 | WALL GOLDFINGER, INC. | +1.802.485.6261 | WWW.WALLGOLDFINGER.COM

TABLE LEGS

E ROUND METAL

F ROUND METAL

G ROUND METAL

H ROUND METAL

Powder coat

Powder coat

Brushed stainless steel

Chrome

3″ diameter

2″ diameter

3″ diameter

2″ square

27¾″ height

27¾″ height

27¾″ height

27¾″ height

¾″ leveler

¾″ leveler

¾″ leveler

14-gauge tubular steel

|

Standard available colors: Furniture White, Neutral Light, Western Beige,

Maple Brown, Flat Black, Forest Green, Navy, Burgundy, Stardust, Smoke Gray, Auburn Gray, Oxford Gray, Georgian Gray Wrinkle, Mist Gray Wrinkle, Chateau Brown Wrinkle, Black Wrinkle, Antique Bronze, Charcoal Metallic, Satin Chrome, Gunmetal, Brushed Steel

ARBOR SPECIFICATION GUIDE | LEGS + BASES | 59

TABLE LEGS

I ROUND METAL

J ROUND METAL

K ROUND TAPERED

L ROUND TAPERED

Aluminum

Bronze

3″ diameter top, 2″ base

3″ diameter top, 2″ base

3″ diameter

3″ diameter

27¾″ height

27¾″ height

27¾″ height

27¾″ height

Leveler options

Metal ferrule

¾″ leveler

¾″ leveler

14-gauge tubular steel | Wire management not available for tapered legs | Variety of Woods available: Maple, cherry, Honduras mahogany, walnut, and specials | See Accessories for table legs featuring wire management and levelers/casters

60 | WALL GOLDFINGER, INC. | +1.802.485.6261 | WWW.WALLGOLDFINGER.COM

TABLE LEGS

M SQUARE TAPERED

N TAPERED METAL

O FLUTED LEG

P CROSS LEG

3″ square top, 2″ base

Chrome

3″ square top

Aluminum

27¾″ height

2″ diameter top, 1” base

2″ diameter base

3″ square

Leveler options

27¾″ height

27¾″ height

27¾″ height

Leveler options

¾″ leveler

¾″ leveler

14-gauge tubular steel | Wire management not available for tapered legs | Maple, cherry, Honduras mahogany, walnut, and specials

Variety of Woods available:

ARBOR SPECIFICATION GUIDE | LEGS + BASES | 61

LEG FINISHES

Powder coating is an advanced method of applying a

until heated and fused into a smooth coating in a cur-

decorative and protective finish to a wide range of ma-

ing oven. The result is a uniform, durable, high-quality,

terials and products that are used by both industries and

and attractive finish that is extremely durable, providing

consumers. The powder used for the process is a mixture

superb impact and corrosion resistance. Powder coat-

of finely ground particles of pigment and resin, which is

ing is the fastest-growing finishing technology in North

sprayed onto a surface to be coated. The charged powder

America, representing over 10% of all industrial finishing

particles adhere to the electrically grounded surfaces

applications. Powder Coating is also RoHS Compliant.

Smoke Gray

Mist Gray Wrinkle

Flat Black

Chateau Brown Wrinkle

Western Beige

Auburn Gray

Georgian Gray Wrinkle

Oxford Gray

Black Wrinkle

Maple Brown

Neutral Light

Charcoal Metallic

Navy

Burgundy

Gunmetal

Stardust

Furniture White

P10113

P10117

P10029

Forest Green P10140

P10048

P10031

P10057

P10030

P10112

P10071

P10143

Brushed Steel P10027

P10114

P10142

Antique Bronze P10141

P10129

P10075

Satin Chrome P11112

Illustrations are broadly representative of specific painted metal types. Please review actual samples before making final selection.

62 | WALL GOLDFINGER, INC. | +1.802.485.6261 | WWW.WALLGOLDFINGER.COM

P10131

P10116

P10023

FOLDING LEGS / BASES

FOLDING LEG MECHANISM Wall Goldfinger’s folding leg mechanism features a rugged reinforced nylon chassis with aluminum moving parts. Positive up and down locks ensure stability in the upright and folded positions.

DOUBLE COLUMN GANGING BAR Pairing our folding mechanisms and rotating them 90° allows for the top to fold rather than the legs. The mechanisms are linked by a ganging bar which allows for simultaneous activation of the locking device. The mechanism combines function and efficiency by allowing the user to operate it from either end of the top.

ARBOR SPECIFICATION GUIDE | LEGS + BASES | 63

FOLDING LEGS / BASES

T-BASE Wall Goldfinger’s T-style base is fabricated from 2″ diameter steel tubing. It features a reinforced nylon and aluminum folding mechanism. The base is available in 21 powder coat colors as well as brushed steel, antique bronze or polished chrome. An optional wire management door can be added to the column (available only in powder coat).

BULLNOSED BASE Our folding bullnose base has the same basic features and finishes as our T-style base above but utilizes a flattened oval section aluminum extrusion, 2½″ × 1½″ nylon end caps complete the base’s cross support. This style base is not available with a wire management door.

64 | WALL GOLDFINGER, INC. | +1.802.485.6261 | WWW.WALLGOLDFINGER.COM

FOLDING LEGS / BASES

OFFSET T-STYLE BASE Some applications may call for an offset T-style base. This has all of the same features as the symmetrical T-style base, opposite.

CUSTOM ARCH BASE We now offer a custom built, classic arch style base. Available in powde coat, brushed stainless or polished stainless finishes.

ARBOR SPECIFICATION GUIDE | LEGS + BASES | 65

LOOP LEG

CUSTOM LOOP LEG The distinctive look of the custom loop leg adds a contemporary touch to any table design. It can be used for stand alone tables or to join tables end-toend. Available in powder coat, brushed stainless or polished stainless finishes.

66 | WALL GOLDFINGER, INC. | +1.802.485.6261 | WWW.WALLGOLDFINGER.COM

PEDESTAL BASES

PEDESTAL BASE WITH TILT TOP The lightweight table top tilts 90°, allowing the table to roll on casters through doorways, etc. Electric, phone and data connections can be accessed through the table top doors, and the base door. A wide assortment of sizes, veneers, and finishes are available.

ARBOR SPECIFICATION GUIDE | LEGS + BASES | 67

PEDESTAL BASES

PEDESTAL BASE WITH REMOVABLE TOP Wall Goldfinger uses proven fabrication techniques to create pedestal bases that are clad in metal. We offer over 100 different metal finishes, from aluminum and bronze to brushed stainless steel and swirled copper.

68 | WALL GOLDFINGER, INC. | +1.802.485.6261 | WWW.WALLGOLDFINGER.COM

PEDESTAL BASES

STONE TILT-TOP TABLE Wall Goldfinger has pioneered the use of lightweight stone panels for table tops, thus making movable stone tables a reality. Virtually any stone can be incorporated into the lightweight composite tops. These top panels can be treated with a “miter fold” edge, as shown, or framed with wood or metal. Wall Goldfinger has also developed a folding top mechanism which allows tables mounted on casters to be rolled through doorways and corridors, and easily repositioned within a room.

ARBOR SPECIFICATION GUIDE | LEGS + BASES | 69

PEDESTAL BASES

SPLIT FOLDING TOP TABLES The split folding top table is another approach to issues of portability and storage. These, too, can utilize lightweight stone, wood, plastics or artificial leather as the cladding.

70 | WALL GOLDFINGER, INC. | +1.802.485.6261 | WWW.WALLGOLDFINGER.COM

PEDESTAL BASES

FOLDING BASE TABLES This type of table considts of a one-piece, lightweight top which is demountable for storage or transport. The base can be folded, creating an easily moved package.

ARBOR SPECIFICATION GUIDE | LEGS + BASES | 71

PEDESTAL BASES

FOLDING TABLE BASE Bridge tables span between fixed conference tables, creating a flexible table system that can combine to make large tables, and then fold and roll out of the way for other uses within the conference room. These are available in various woods and sizes, for use in multipurpose rooms and also offer electric, data and phone connections as options.

72 | WALL GOLDFINGER, INC. | +1.802.485.6261 | WWW.WALLGOLDFINGER.COM

PEDESTAL BASES

ARBOR SPECIFICATION GUIDE | LEGS + BASES | 73

PEDESTAL BASES

LEVELING SYSTEM In some cases it may be necessary or desireable to place the levelers under the top rather than in the base. Wall Goldfinger has developed a system that is adaptable, effective and minimally obtrusive.

74 | WALL GOLDFINGER, INC. | +1.802.485.6261 | WWW.WALLGOLDFINGER.COM

LEVELERS

LEVELER DISCS Knob Style Steel and Stainless Steel Glide is ideal for light-duty load requirements. These low-profile, solid bottom, large diameter black base glides are perfect for leveling and stabilizing tables without the need for tools. Useful in both feet and knob applications. 3″ × ½″ and adjustable to ¾″. Available in powder coated black, brushed stainless steel, and black plastic.

LEVELER

LOCKING CASTER

LEVELING CASTER

Light duty, black plastic base low-pro-

Expanded weight distribution prevents

Protect your hardwood and ce-

file feature long-stem extended thread

tracks from being pressed into carpet-

ramic floors from scuff marks with

lengths and hex adjustment.

ing. Ball bearing pivot points provide

these gentle urethane wheels.

• 1″ diameter

smooth wheel rotation.

• 2½″ diam wheels adjustable to ¾″

• ¾″ lift

• 2″ diameter casters swivel full 360°

• black metal or stainless steel

• black plastic

• 90 lb. rating per unit

• 90 lb. load rating per caster

ARBOR SPECIFICATION GUIDE | LEGS + BASES | 75

76 | WALL GOLDFINGER, INC. | +1.802.485.6261 | WWW.WALLGOLDFINGER.COM

TABLE ACCESSORIES

COMMUNICATIONS

WIRE MANAGEMENT

POWER/DATA

TABLE ACCESSORIES Wall Goldfinger offers an extensive choice of table accessories to fill every functional need. Accessories are integrated into the overall table design to manage electrical power, data connections, and communications requirements.

78 | WALL GOLDFINGER, INC. | +1.802.485.6261 | WWW.WALLGOLDFINGER.COM

ARBOR SPECIFICATION GUIDE | TABLE ACCESSORIES | 79

GROMMETS

ROUND PASS THROUGH / FLANGE 1½″, 2″, and 2½″ diameter | Available in woods and plastic colors

Antique Bronze

Polished Brass

Polished Chrome

Satin Chrome

Black

Putty

Walnut Brown

Light Gray

White

PLATED STEEL / FLUSH Cap sits on recessed liner and is flush with desktop. Held in place with spring. Available in one, two, or no-slot configurations. 1¾″, 2½″, and 3″ diameter. Standard Finishes: Matte Black, Polished Chrome, Satin Chrome, Black Chrome, Polished Brass, English Antique, and Satin Nickel

SOLID BRASS Each grommet cap is made of solid brass, and each liner is hand-machined from solid brass tubing. Three lowprofile sizes with liner going into hole. The cap sits just 1/8″ high for a trim look. Caps and Liners may be used alone or as sets. 1⅞″ 2⅛″, 2⅞″ diameter. Standard Finishes: Matte Black, Polished Chrome, Satin Chrome, Black Chrome, Polished Brass, English Antique, Satin Nickel | Custom finishes: Satin Brass and Satin Bronze

WOOD GROMMETS Wooden grommets give a warm finishing touch to any desk. As a natural material, they harmonize with the desktop, blend in, and complement. Available in a wide range of functional styles.

80 | WALL GOLDFINGER, INC. | +1.802.485.6261 | WWW.WALLGOLDFINGER.COM

TABLE TOP HATCHES

PASS THROUGH ACCESS Pivoting grommet doors are a simple and durable system for wiring to pass through to the floor for data connections. The pivot system never needs adjustment. Standard size is 3″ by 3″. Brushed or polished stainless steel, bronze, and a variety of wood veneers are available. Custom sizes and materials are available

METAL DOOR FRAME

METAL DOOR VENEER SURFACE

ARBOR SPECIFICATION GUIDE | TABLE ACCESSORIES | 81

TABLE TOP HATCHES

SINGLE DOOR ACCESS Single door access can be incorporated in the table top design to meet power, data, and communication requirements. The door can be designed to blend into the overall veneer layout, or as a design accent.

VENEER

VENEER WITH BRUSH

82 | WALL GOLDFINGER, INC. | +1.802.485.6261 | WWW.WALLGOLDFINGER.COM

TABLE TOP HATCHES

STAINLESS STEEL WITH METAL BOX FRAME

BRONZE METAL FRAME

ARBOR SPECIFICATION GUIDE | TABLE ACCESSORIES | 83

TABLE TOP HATCHES

DOUBLE DOOR ACCESS For applications with greater electrical, data and communications requirements, a double door access may be the preferred solution. Double doors can also be designed to provide space to store components when not in use. Various finish options are available.

VENEER

VENEER WITH BRUSHES

84 | WALL GOLDFINGER, INC. | +1.802.485.6261 | WWW.WALLGOLDFINGER.COM

TABLE TOP HATCHES

STAINLESS STEEL WITH BRUSH

VENEER WITH METAL BOX FRAME

ARBOR SPECIFICATION GUIDE | TABLE ACCESSORIES | 85

COMMUNICATION

SPEAKER PHONE No matter your choice of speaker phone system, Wall Goldfinger can design a table that allows the system to be discretely stored when not in use and easily accessed with the touch of a finger.

SPEAKER PHONE

SPEAKER PHONE

VENEER HORIZINTAL FLIP-OVER WITH SPEAKER PHONE

VENEER VERTICAL FLIP-OVER WITH SPEAKER PHONE

86 | WALL GOLDFINGER, INC. | +1.802.485.6261 | WWW.WALLGOLDFINGER.COM

COMMUNICATION

MICROPHONES Wall Goldfinger can accommodate a range of microphones, including built-in, pop up, and removable.

BUTTON MICROPHONE

CLAM SHELL BUTTON MICROPHONE

SMALL HATCH WITH REMOVEABLE MICROPHONE

SURFACE MOUNTED MICROPHONES

ARBOR SPECIFICATION GUIDE | TABLE ACCESSORIES | 87

COMMUNICATION

METAL AND VENEER FLIP-OVER MICROPHONE

METAL FLIP-OVER DOUBLE MICROPHONE

METAL FLIP-OVER WITH MULTIPLE BUTTON MICROPHONES

88 | WALL GOLDFINGER, INC. | +1.802.485.6261 | WWW.WALLGOLDFINGER.COM

POWER / DATA UNITS

CABLE CUBBY SERIES TABLE TOP CONNECTOR AND CABLE STORAGE Provides convenient, inconspicuous routing of and access to A/V power, data, audio, and video connections.

TILT ‘N PLUG TABLE TOP INTERCONNECT BOX Computer video (15-pin HD), stereo audio, modem (RJ11), network (RJ45) input connections, and AC power connection.

TILT-UP HIDEAWAY SURFACE ACCESS Surface enclosure with dual power and data connections.

ARBOR SPECIFICATION GUIDE | TABLE ACCESSORIES | 89

WIRE MANAGEMENT

A HINGED DOOR

B EXTERNAL

C RACEWAY

Access holes are 1″ diameter located at top

Features plastic invisible hinge

1″ × 1″ plastic raceway set

and bottom of door and ¾″ W × 19″ H steel

that opens to put wires in. Inside

into wooden legs.

door with self closing hinges. Runs within

is ½″ × ½″.

2″ of top plate and bottom of column.*

* Standard available colors in Powder Coat. Not available in Brushed Steel, Antique Bronze, or Brushed Chrome

90 | WALL GOLDFINGER, INC. | +1.802.485.6261 | WWW.WALLGOLDFINGER.COM

WIRE MANAGEMENT

E CROSS COLUMN

F DETACHABLE COLUMN GUARD

A lightweight aluminum leg that incorporates wire

Easy access wire manager that detaches from

management — a custom Wall Goldfinger propri-

round table leg column to organize wires and

etary extrusion. A clip-in plate can be added to

eliminate clutter.

contain wire management. Anodized or powder coated finish available.

ARBOR SPECIFICATION GUIDE | TABLE ACCESSORIES | 91

POWER / DATA UNITS

UNDER TABLE TOP ACCESS Power and communications low-profile grommet. Left: 15″ length. Right: 10½″ length.

DETACHABLE FIXTURE BOX Power and communications low-profile fixture box has black tetured finish and mounts under table top. Fixture box has (2) receptacles, factory wired with 72″ power cord and standard tele/data ports.

92 | WALL GOLDFINGER, INC. | +1.802.485.6261 | WWW.WALLGOLDFINGER.COM

MODESTY PANELS

PANEL IN BACK

PANEL IN FRONT

Hinged panel behind legs

Removable panel in front of leg

FULL MODESTY

Removable panel in front of leg

CONCEALED TOGGLE CONNECTOR SYSTEM Attach and remove full or half modesty panels to table tops with our toggle latch connector. We can apply the connector system to veneer and metal modesty panels.

ARBOR SPECIFICATION GUIDE | TABLE ACCESSORIES | 93

TRANSPORT / STORAGE

TABLE TOP STORAGE CART

PORTABLE LEG CART

1200-lb. capacity truck 12-ga. steel with a gray powder-

Holds all types of legs, black painted MDF with protec-

coated finish. Adjustable rails has red vinyl coating for

tive bumper, durable 3″ nylon wheels, and a side stor-

nonmarring contact surface. Trucks 5″ dia. phenolic

age mount for an ECA attachment. Dimension of cart is

wheels. Dimension of cart is 38½″ L × 27½″ W × 32½″ H.

27¾″ L × 22″ W × 28″ H.

VERTICAL TABLE TOP STORAGE CART Same footprint as our regular table top cart. 1200-lb. capacity truck 12-ga. steel with a gray powder-coated finish. Top of rails has red vinyl coating for nonskid, nonmarring contact surface. Trucks 5″ dia. phenolic wheels. Dimension of cart is 38½″ L × 27½″ W × 52½″ H.

94 | WALL GOLDFINGER, INC. | +1.802.485.6261 | WWW.WALLGOLDFINGER.COM

TRANSPORT / STORAGE

ENVELOPE WRAP Protect custom furniture while transporting or in storage. Made of quilted poly/cotton outer fabric with cotton and synthetic filler. Quilted with lock-stitching for extra durability.

FITTED ENVELOPE Table tops stored in fabric envelopes, fitted to size, with velcro enclosure to form fit.

ARBOR SPECIFICATION GUIDE | TABLE ACCESSORIES | 95

96 | WALL GOLDFINGER, INC. | +1.802.485.6261 | WWW.WALLGOLDFINGER.COM

APPENDIX

TABLE WEIGHTS

PUBLICATIONS

TABLE WEIGHTS

Component TABLES

TABLES

TABLES

Description 2″ TOP V-1

½″ WOOD EDGE

2″ WOOD EDGE

3⁄16″ SST

3⁄16″ ALUMINUM

30 x 60

39 lb

50 lb

50 lb

42 lb

33 x 66

46 lb

58½ lb

58½ lb

49 lb

36 x 72

54½ lb

68 lb

68 lb

57½ lb

36 x 84

64 lb

79 lb

79 lb

67½ lb

48 x 48

49 lb

61 lb

61 lb

52 lb

54 x 54

61½ lb

75 lb

75 lb

64½ lb

60 x 60

75 lb

90 lb

90 lb

78½ lb

1½″ TOP V-1

½″ WOOD EDGE

2″ WOOD EDGE

3⁄1″ SST

3⁄16″ ALUMINUM

30 x 60

35½ lb

40 lb

46½ lb

38½ lb

33 x 66

42½ lb

49 lb

54½ lb

46 lb

36 x 72

50½ lb

58 lb

63½ lb

54½ lb

36 x 84

58½ lb

66½ lb

73 lb

63 lb

48 x 48

45 lb

51 lb

56½ lb

48 lb

54 x 54

56 lb

63½ lb

69 lb

60 lb

60 x 60

69 lb

77 lb

83½ lb

73½ lb

1½″ TOP L-1

½″ WOOD EDGE

1½″ WOOD EDGE

3⁄16″ SST

3⁄16″ ALUMINUM

30 x 60

39 lb

48 lb

36½ lb

28½ lb

33 x 66

47 lb

58½ lb

42½ lb

34 lb

36 x 72

56 lb

69½ lb

49 lb

40 lb

36 x 84

65½ lb

81¼ lb

56½ lb

46½ lb

48 x 48

50 lb

62 lb

44 lb

35½ lb

54 x 54

63 lb

78 lb

53 lb

44 lb

60 x 60

78 lb

96½ lb

63½ lb

53½ lb

V-1 = Veneer, L-1 = Majilite synthetic leather, ST-1 = Lightweight stone, SST = Stainless steel

98 | WALL GOLDFINGER, INC. | +1.802.485.6261 | WWW.WALLGOLDFINGER.COM

TABLE WEIGHTS

Component TABLES

LEGS

HATCHES

LEG PLATE

Description 1½″ TOP ST-1

¼″ ST-1 EDGE

½″ WOOD EDGE

1½″ WOOD EDGE

3⁄16″ SST

3⁄16″ ALUMINUM

30 x 60

72½ lb

75½ lb

80 lb

86½ lb

77½ lb

33 x 66

88 lb

91½ lb

98 lb

103½ lb

112 lb

36 x 72

104½ lb

108½ lb

115½ lb

121 lb

130 lb

36 x 84

122 lb

126½ lb

134 lb

140½ lb

150½ lb

48 x 48

93 lb

96½ lb

102½ lb

108 lb

116½ lb

54 x 54

117½ lb

121 lb

128½ lb

133½ lb

142½ lb

60 x 60

145 lb

149 lb

157 lb

163½ lb

173½ lb

3″ WOOD

3″ STEEL

3″ ALUMINUM

2″ STEEL

2″ ALUMINUM

X ALUMINUM

8 lb

8 lb

4 lb

6 lb

3½ lb

3 lb

3 × 3″ SST

3× 3″ ALUMINUM

6 × 8″ SST

6 × 8″ ALUMINUM

1 lb

⅓ lb

6 lb

2 lb

1½ lb each

V-1 = Veneer, L-1 = Majilite synthetic leather, ST-1 = Lightweight stone, SST = Stainless steel These weights are approximate and may vary due to specific construction techniques.

ARBOR SPECIFICATION GUIDE | APPENDIX | 99

PUBLICATIONS

Stone Tables Brochure Specification Guide FIRST EDITION, 2008

This comprehensive guide to stone table design considerations is a valuable resource for designers and specifiers. It contains a wealth of information on stone types, fabrication techniques, and design parameters. Download the brochure in PDF format directly from our website, or contact one of our sales representatives for a printed copy. PDF | 74.6 MB

www.wallgoldfinger.com/publications

eNewsletters SECOND SERIES

Our eNewsletter features the latest news about our company, including new designs and technical achievements. Sign up on our web site for monthly delivery. www.wallgoldfinger.com/news/subscribe

Postcard Collection CONTINUING SERIES

Every month Wall Goldfinger issues a postcard featuring a noteworthy recent project. Complete project information is included. If you would like to be added to our postcard mailing list or receive a booklet of all postcards to date, please contact a sales representative. www.wallgoldfinger.com/contact/salesrepresentatives

100 | WALL GOLDFINGER, INC. | +1.802.485.6261 | WWW.WALLGOLDFINGER.COM

ARBOR SPECIFICATION GUIDE | APPENDIX | 101

Arbor Reconfigurable Tables Specification Guide Fourth Edition January 2011 Wall Goldfinger, Inc. 7 Belknap Street, Suite 3 Northfield, Vermont 05663 802 | 485-6261 802 | 485-6267 (Fax) www.wallgoldfinger.com Copyright ©2011 Wall Goldfinger, Inc. Publisher: Wall Goldfinger, Inc. Editorial content revised by John Wall, John Belniak, Douglas Walker Creative Director: Chuck Weaver Design and layout by Thor Goodrich The content of this guide is furnished for informational use only and is distributed for sales representatives of Wall Goldfinger, Inc. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording and/or otherwise, without the prior written permission of Wall Goldfinger, Inc. Printed and bound inhouse by Carol Edwards and Thor Goodrich This volume was produced entirely on an Apple® MacPro Dual Core Intel G5 computer with Adobe® InDesign® CS5 software, output to a Canon® CLC1180 printer, and printed on Mohawk Color Copy 100% recycled 28 lb PC White paper which is manufactured entirely with Green-e certified windgenerated electricity.

W A L L

G O L D F I N G E R

7 Belknap Street, Suite 3 Northfield, Vermont 05663 P 802 | 485-6261 F 802 | 485-6267

www.wallgoldfinger.com ©2011