Uncertainty And Dimensional Calibration
This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA
Overview
Download & View Uncertainty And Dimensional Calibration as PDF for free.
More details
- Words: 127
- Pages: 1
File : pdf, 259 KB, 30 pages Download : http://artikel-software.com/blog
TOC 1.Introduction 2.Classifying Sources of Uncertainty 3.The Generic Uncertainty Budget 3.1 Master Gage Calibration 3.2 Long Term Reproducibility 3.3 Thermal Expansion 3.3.1 Thermometer Calibration 3.3.2 Coefficient of Thermal Expansion (CTE) 3.3.3 Thermal Gradients 3.4 Mechanical Deformation 3.5 Scale Calibration 3.6 Instrument Geometry 3.7 Artifact Effects 3.8 Calculation of Uncertainty 3.9 Uncertainty Budgets for Individual Calibrations 4. Gage Blocks (Interferometry) 4.1 Master Gage Calibration 4.2 Long Term Reproducibility 4.3 Thermal Expansion 5. Gage Blocks (Mechanical Comparison) 5.1 Master Gage Calibration 6. Gage Wires (Thread and Gear Wires) and Cylinders (Plug Gages) 7. Ring Gages (Diameter <100 mm) 8. Gage Balls (Diameter) 9. Roundness Standards (Balls, Rings, etc.) 10. Optical Flats 11. Indexing Tables 12. Angle Blocks 13. Sieves
TOC 1.Introduction 2.Classifying Sources of Uncertainty 3.The Generic Uncertainty Budget 3.1 Master Gage Calibration 3.2 Long Term Reproducibility 3.3 Thermal Expansion 3.3.1 Thermometer Calibration 3.3.2 Coefficient of Thermal Expansion (CTE) 3.3.3 Thermal Gradients 3.4 Mechanical Deformation 3.5 Scale Calibration 3.6 Instrument Geometry 3.7 Artifact Effects 3.8 Calculation of Uncertainty 3.9 Uncertainty Budgets for Individual Calibrations 4. Gage Blocks (Interferometry) 4.1 Master Gage Calibration 4.2 Long Term Reproducibility 4.3 Thermal Expansion 5. Gage Blocks (Mechanical Comparison) 5.1 Master Gage Calibration 6. Gage Wires (Thread and Gear Wires) and Cylinders (Plug Gages) 7. Ring Gages (Diameter <100 mm) 8. Gage Balls (Diameter) 9. Roundness Standards (Balls, Rings, etc.) 10. Optical Flats 11. Indexing Tables 12. Angle Blocks 13. Sieves
Related Documents
Uncertainty And Dimensional Calibration
June 2020 2
Calibration
July 2020 13
Calibration
May 2020 12
Calibration And Measurement Process
December 2019 14
Temperature And Dimensional Measurement
November 2019 26