Tutorial 3

Tutorial 3 1) For IDE hard disk, what is recommended CMOS setting? 2) What causes the floppy drive light to stay on constantly? 3) What are the reasons to upgrade the BIOS? 4) How many pins should there be on an ATX motherboard power connector? 5) If you are wearing an antistatic wrist strap, which are the dangerous computer component to work with while? 6) How can you start the CMOS setup utility? 7) What you use to configure a hard drive to be a master or slave drive? 8) If you want to upgrade the hard disk drive by installing a disk with a higher capacity than is supported by the BIOS. What should you do? 9) The configuration data of the BIOS is stored at where? 10) What is the color of P8 & P9 of the AT power supply connector and how should they be connected to the motherboard? 11) What are the functions of the BIOS? 12) There are how many pins on a floppy drive cable?