Topics For Training

DIVISION TRAINING- WORKSHOP ON BASIC COMPUTER REPAIR AND COMMUNICATION USING INTERNET November 29-30, 2008

Topics: I. Computer Fundamentals a. Definition of Computer b. Computer Terms c. Computer Basic Units and Functions II. Software and hardware Fundamentals 1. Software a. Definition b. Kinds of Software c. Examples 2. Hardware a. Definition b. Kinds of hardware and Functions III. Computer Servicing Fundamentals 1. 2. 3. 4. 5.

Assembling & disassembling a computer unit Assembling/Installing the Internal parts of the computer (System Unit). Booting a computer. Formatting a hard disk drive/flash disk/ floppy disk Installing/Uninstalling Software a. printer driver b. cd/dvd writer driver c. MS Office 2000/2003 6. CD/DVD Burning a. data b. music c. video IV. Internet Fundamentals a. Browsing/Surfing b. Create E-mail Address c. Sending and Attaching Files 1. e-mail 2. document/s 3. pictures 4. voice 5. video d. Uploading/Downloading Files e. Opening websites V. Internet Communication a. Using Yahoo Messenger for Communication b. Chatting c. Viewing video thru web cam .

DIVISION TRAINING WORKSHOP ON BASIC COMPUTER REPAIR AND COMMUNICATION USING INTERNET November 28-29, 2008

Trainers ABRAHAM P. IMAS Education Supervisor I (SpED/ICT)

ELADIO J. JOVERO Division ICT Coordinator (Elementary) ANGELO RENATO S. SENCIDA ICT – U OJT

COMPUTER SERVICING FUNDAMENTALS

Assembling & Disassembling a Computer Unit Assembling Procedure: 1. Prepare the needed computer parts. 2. Connect the mouse ps2 connector to the ps2 mouse port. 3. Connect the keyboard ps2 connector to the ps2 keyboard port. 4. Connect the monitor serial connector to the monitor serial port. 5. Connect the speaker baby plug connector to the audio port. 6. Connect the power cord to the power port. 7. Connect the power cord of the monitor. 8. Plug the AC plug of the System Unit to the AVR. 9. Plug also the AC plug of the monitor to the AVR. 10. Plug the AVR AC plug to the AC 220v source. 11. Then turn on the monitor and the system unit. Note: Be sure the wires are properly arranged, not in a mess connection. Disassembling Procedure: 1. Unplug all connectors from the System Unit port. Note: Be sure to unscrew the serial monitor connector before disconnecting it. Assembling/Installing the Internal Parts of the Computer (System Unit). Assembling Procedure: 1. Place the motherboard properly in casing aligned to the port casing. 2. Put screws as needed to fasten the mother board. 3. Put the hard disk drive to its place in the computer casing and put screws on it. 4. Put the floppy disk drive to its place in the computer casing and put screws on it. 5. Put the CD/DVD ROM/Writer to its place in the computer casing and put screws on it. 6. Insert the CPU/Microprocessor to its socket and locked it with the heat sink. 7. Carefully insert the memory chips on the memory slots of the motherboard. 8. Connect the power supply to the computer casing and put screws on it. 9. Connect the HDD IDE/SATA connector/Bus to the IDE slot of the motherboard, to the hard disk drive and to the CD/ DVD ROM/Writer. 10. Connect the FDD connector to the mother board and to the Floppy Disk Drive. 11. Connect the power supply connectors to the mother board power supply socket/s, hard disk drive, floppy disk drive, DV/DVD ROM/Writer. 12. Be sure the connections are correctly connected and properly arranged the wires to look professionally connected.

Booting a computer

Procedure: Cold Boot 1. Hot Boot

Formatting a Hard Disk Drive/Flash disk/ Floppy Disk Procedure:

Installing/Uninstalling Software