Test Case Master
This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA
Overview
Download & View Test Case Master as PDF for free.
More details
- Words: 475
- Pages: 9
Put your logo here
Test Cases Version <1.0>
.
October 14, 2008
Test Cases
Version: <1.0> Date: 10/14/08
Revision History Date 2001-10-16
Version <x.x>
Description <details>
Author
ii
Test Cases
Version: <1.0> Date: 10/14/08
Table of Contents 1. Introduction 1.1 Definitions, Acronyms and Abbreviations 1.2 References
1 1 1
2. Testing Environments 2.1 Environment 1 2.2 Environment 2
2 2 2
3. Setup Information (general Pre-conditions)
3
4. Test Cases 4.1 Test Case 1: 4.1.1 Description 4.1.2 Pre-conditions for this test case 4.1.3 Scenario 4.1.4 Array of values 4.2 Test Case 2:
4 4 4 4 4 4 5
iii
Test Cases 1.Introduction [If necessary, write the introduction of the Test Cases. It should provide an overview of the entire document, and include the purpose, scope, definitions, acronyms, abbreviations, references and overview of this set of Test Cases.] 1.1Definitions, Acronyms and Abbreviations [This subsection should provide the definitions of all terms, acronyms, and abbreviations required to interpret properly the Test Cases. This information may be provided by the project Glossary.] 1.2References [This subsection should provide a complete list of all documents referenced elsewhere in the Test Cases. Each document should be identified with a title, report number (if applicable), date, and publishing organization. Specify the sources from which the references can be obtained. This information may be provided by reference to an appendix or to another document.]
Logibro Inc., 2000
1
Test Cases
Version: <1.0> Date: 10/14/08
2.Testing Environments 2.1Environment 1 Machine Name Version Tester Name New Log
DB Directory DB
CISAM/Online/SE/…
Test Date If necessary, list the new log after tests have been run.
Client Server /Back-End State
Successful/Failed
2.2Environment 2 [Repeat above chart as needed for environment 2.]
2
Test Cases
Version: <1.0> Date: 10/14/08
3.Setup Information (general Pre-conditions) [Enter the prerequisites to execute the test cases (e.g. Flags, parameters, etc.)]
3
Test Cases
Version: <1.0> Date: 10/14/08
4.Test Cases 4.1Test Case 1: 4.1.1Description [If necessary, write description text.] 4.1.2Pre-conditions for this test case [If necessary, write pre-conditions text.] 4.1.3Scenario
Test Case UC Step
Step Description
Expected Result
Actual Result (if different from expected)
Successfu l/Failed
Test Case Status
Successful /Failed
Environment Nbr (if failed)
Log Number (if failed)
4.1.4Array of values [If necessary, fill an array of value.]
Array of values Scenario 1
Scenario 2
Scenario3
Scenario 4
Value1 Value2 … ValueX Expected Result Actual Result 4
Scenario 5
Test Cases
Version: <1.0> Date: 10/14/08
(if different from expected) Successful/Failed Environment Nbr (if failed) Log Number (if failed)
4.2Test Case 2: [If necessary, repeat test case's previous section for each additional test case.]
5
.
October 14, 2008
Version: <1.0> Date: 10/14/08
Revision History Date 2001-10-16
Version <x.x>
Description <details>
Author
ii
Version: <1.0> Date: 10/14/08
Table of Contents 1. Introduction 1.1 Definitions, Acronyms and Abbreviations 1.2 References
1 1 1
2. Testing Environments 2.1 Environment 1 2.2 Environment 2
2 2 2
3. Setup Information (general Pre-conditions)
3
4. Test Cases 4.1 Test Case 1:
4 4 4 4 4 4 5
iii
Test Cases 1.Introduction [If necessary, write the introduction of the Test Cases. It should provide an overview of the entire document, and include the purpose, scope, definitions, acronyms, abbreviations, references and overview of this set of Test Cases.] 1.1Definitions, Acronyms and Abbreviations [This subsection should provide the definitions of all terms, acronyms, and abbreviations required to interpret properly the Test Cases. This information may be provided by the project Glossary.] 1.2References [This subsection should provide a complete list of all documents referenced elsewhere in the Test Cases. Each document should be identified with a title, report number (if applicable), date, and publishing organization. Specify the sources from which the references can be obtained. This information may be provided by reference to an appendix or to another document.]
Logibro Inc., 2000
1
Version: <1.0> Date: 10/14/08
2.Testing Environments 2.1Environment 1 Machine Name Version Tester Name New Log
DB Directory DB
CISAM/Online/SE/…
Test Date If necessary, list the new log after tests have been run.
Client Server /Back-End State
Successful/Failed
2.2Environment 2 [Repeat above chart as needed for environment 2.]
2
Version: <1.0> Date: 10/14/08
3.Setup Information (general Pre-conditions) [Enter the prerequisites to execute the test cases (e.g. Flags, parameters, etc.)]
3
Version: <1.0> Date: 10/14/08
4.Test Cases 4.1Test Case 1:
Test Case UC Step
Step Description
Expected Result
Actual Result (if different from expected)
Successfu l/Failed
Test Case Status
Successful /Failed
Environment Nbr (if failed)
Log Number (if failed)
4.1.4Array of values [If necessary, fill an array of value.]
Array of values Scenario 1
Scenario 2
Scenario3
Scenario 4
Value1 Value2 … ValueX Expected Result Actual Result 4
Scenario 5
Version: <1.0> Date: 10/14/08
(if different from expected) Successful/Failed Environment Nbr (if failed) Log Number (if failed)
4.2Test Case 2:
5
Related Documents
Test Case Master
November 2019 6
Test Case
November 2019 22
Test Case
November 2019 27
Test Case
June 2020 11
Spelling Test Master
May 2020 4