EXTERNAL MICROMETERS ✓
ETALON Basic to 0,001 mm High accuracy – Parallax-free reading on vernier.
DIN 863 T1 NF E 11-095 Parallax-free vernier reading to 0,001 mm Tungsten carbide tipped Ø 6,5 mm 0,5 mm
00119051 00119052 00119053 00119054
Max. 10 N
mm 0 ÷ 25 25 ÷ 50 50 ÷ 75 75 ÷ 100
µm 3 3 3 3
µm 2 2 3 3
Plastic case Identification number Inspection report with a declaration of conformity
ETALON 260 Standard Models with Analogue Indication The knurled sleeve only needs to be reversed to render the friction drive built into the thimble inactive.
✓ DIN 863 T1 NF E 11-095 0 to 100 mm resp. 0 to 4 in with vernier Tungsten carbide tipped ≤ 100 mm: Ø 6,5 mm, > 100 ≤ 300 mm: Ø 8 mm 0,5 mm Max. 10 N
071115887 071115888 071115889 071115890 071115891 071115892 071115893 071115894 071115895 071115896 071115897 071115898
mm 0 ÷ 25 25 ÷ 50 50 ÷ 75 75 ÷ 100 100 ÷ 125 125 ÷ 150 150 ÷ 175 175 ÷ 200 200 ÷ 225 225 ÷ 250 250 ÷ 275 275 ÷ 300
mm 0,002 0,002 0,002 0,002 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01
µm 2 2 3 3 4 4 5 5 6 6 7 7
µm 1 1,5 1,5 1,5 2 2,5 3 3 3,5 3,5 4 4
071115899 071115900 071115901 071115902
in 0÷1 1÷2 2÷3 3÷4
in 0.0001 0.0001 0.0001 0.0001
µm 2 2 3 3
µm 1 1,5 1,5 1,5
Plastic case Identification number Inspection report with a declaration of conformity
B-5