Tapped Hole Fixture Plate
This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA
Overview
Download & View Tapped Hole Fixture Plate as PDF for free.
More details
- Words: 310
- Pages: 1
Test Plate Program, .161” Drill, on 5 x 12 plate www.modularcnc.com
Program Notes: -Regular drill program using .160” drill. -Program starts at lower left corner of your 5 x 12” plate. Drilling down .100”. -This program is for testing, always take dry runs and practice cuts to make sure it will work with your machine. -Use at your own risk.
(Import File: Test Plate-001.DXF)
N190 G00 Z 0.25000
N400 G00 Z 0.25000
(Import Date: 2/2/2009)
N200 G00 X 5.00000 Y 0.50000
N410 G00 X 5.00000 Y 2.50000
N210 G01 Z-0.10000
N420 G01 Z-0.10000
N10 G00 Z 0.25000
N220 G00 Z 0.25000
N430 G00 Z 0.25000
N20 G00 X 1.00000 Y 0.50000
N230 G00 X 7.00000 Y 0.50000
N440 G00 X 5.00000 Y 4.50000
N30 G01 Z-0.10000 F 3.00
N240 G01 Z-0.10000
N450 G01 Z-0.10000
N40 G00 Z 0.25000
N250 G00 Z 0.25000
N460 G00 Z 0.25000
N50 G00 X 1.00000 Y 2.50000
N260 G00 X 9.00000 Y 0.50000
N470 G00 X 7.00000 Y 4.50000
N60 G01 Z-0.10000
N270 G01 Z-0.10000
N480 G01 Z-0.10000
N70 G00 Z 0.25000
N280 G00 Z 0.25000
N490 G00 Z 0.25000
N80 G00 X 1.00000 Y 4.50000
N290 G00 X11.00000 Y 0.50000
N500 G00 X 9.00000 Y 4.50000
N90 G01 Z-0.10000
N300 G01 Z-0.10000
N510 G01 Z-0.10000
N100 G00 Z 0.25000
N310 G00 Z 0.25000
N520 G00 Z 0.25000
N110 G00 X 3.00000 Y 4.50000
N320 G00 X11.00000 Y 2.50000
N530 G00 X11.00000 Y 4.50000
N120 G01 Z-0.10000
N330 G01 Z-0.10000
N540 G01 Z-0.10000
N130 G00 Z 0.25000
N340 G00 Z 0.25000
N550 G00 Z 0.25000
N140 G00 X 3.00000 Y 2.50000
N350 G00 X 9.00000 Y 2.50000
N630 G00 X 0.00000 Y 0.00000
N150 G01 Z-0.10000
N360 G01 Z-0.10000
N160 G00 Z 0.25000
N370 G00 Z 0.25000
N170 G00 X 3.00000 Y 0.50000
N380 G00 X 7.00000 Y 2.50000
N180 G01 Z-0.10000
N390 G01 Z-0.10000
Program Notes: -Regular drill program using .160” drill. -Program starts at lower left corner of your 5 x 12” plate. Drilling down .100”. -This program is for testing, always take dry runs and practice cuts to make sure it will work with your machine. -Use at your own risk.
(Import File: Test Plate-001.DXF)
N190 G00 Z 0.25000
N400 G00 Z 0.25000
(Import Date: 2/2/2009)
N200 G00 X 5.00000 Y 0.50000
N410 G00 X 5.00000 Y 2.50000
N210 G01 Z-0.10000
N420 G01 Z-0.10000
N10 G00 Z 0.25000
N220 G00 Z 0.25000
N430 G00 Z 0.25000
N20 G00 X 1.00000 Y 0.50000
N230 G00 X 7.00000 Y 0.50000
N440 G00 X 5.00000 Y 4.50000
N30 G01 Z-0.10000 F 3.00
N240 G01 Z-0.10000
N450 G01 Z-0.10000
N40 G00 Z 0.25000
N250 G00 Z 0.25000
N460 G00 Z 0.25000
N50 G00 X 1.00000 Y 2.50000
N260 G00 X 9.00000 Y 0.50000
N470 G00 X 7.00000 Y 4.50000
N60 G01 Z-0.10000
N270 G01 Z-0.10000
N480 G01 Z-0.10000
N70 G00 Z 0.25000
N280 G00 Z 0.25000
N490 G00 Z 0.25000
N80 G00 X 1.00000 Y 4.50000
N290 G00 X11.00000 Y 0.50000
N500 G00 X 9.00000 Y 4.50000
N90 G01 Z-0.10000
N300 G01 Z-0.10000
N510 G01 Z-0.10000
N100 G00 Z 0.25000
N310 G00 Z 0.25000
N520 G00 Z 0.25000
N110 G00 X 3.00000 Y 4.50000
N320 G00 X11.00000 Y 2.50000
N530 G00 X11.00000 Y 4.50000
N120 G01 Z-0.10000
N330 G01 Z-0.10000
N540 G01 Z-0.10000
N130 G00 Z 0.25000
N340 G00 Z 0.25000
N550 G00 Z 0.25000
N140 G00 X 3.00000 Y 2.50000
N350 G00 X 9.00000 Y 2.50000
N630 G00 X 0.00000 Y 0.00000
N150 G01 Z-0.10000
N360 G01 Z-0.10000
N160 G00 Z 0.25000
N370 G00 Z 0.25000
N170 G00 X 3.00000 Y 0.50000
N380 G00 X 7.00000 Y 2.50000
N180 G01 Z-0.10000
N390 G01 Z-0.10000
