Structural Steel Dimenssions
This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA
Overview
Download & View Structural Steel Dimenssions as PDF for free.
More details
- Words: 4,825
- Pages: 9
PHONE: 800-949-4151 FAX: 724-847-7127
EMAIL: [email protected]
American Extruded Products
www.americanextrudedproducts.com
AMEREX
STANDARD STRUCTURALS 304 & 316 STAINLESS
R .375 (.313) .250 TYP. STAINLESS STEEL FILLET
R .125 (.090) SPECIFICATIONS: ASTM A-276, AMS-QQ-S-763 .060 (for Extrusion only) ASTM A-479, DUPONT SW 300M TYP. STAINLESS STEEL CORNER
I-BEAMS "E" = EXTRUDED
"W" = WELDED (two extruded "Tees" are welded together)
Designation
Designation
Flange
(Nominal Depth in
Area A,
Depth d,
inches and
in.2
in.
Width bf, in.
Weight in
Web
Thickness tf, in.
Pounds per Linear Foot)
"A"
"B"
Flange
(Nominal
Thickness tf,
"E"
Depth in Milli-
Area A,
Depth d,
-OR-
metres and
mm2
mm
in.A
"W"
Mass in Kilo-
A
Width bf, mm
"D"
Thickness tf, mm
grams per
"C"
Web
Metre)
"A"
"B"
Thickness tf, mmA
A
"C"
"D"
WIDE FLANGE
W12 x x x x x x
58 53 50 45 40 35
17.0 15.6 14.7 13.2 11.8 10.3
12.19 10.010 12.06 9.995 12.19 8.080 12.06 8.045 11.94 8.005 12.50 6.560
0.640 0.575 0.640 0.575 0.515 0.520
0.360 0.345 0.370 0.335 0.295 0.300
W W W W W W
W310 x x x x x x
86 11 000 79 10 100 74 9 480 67 8 520 60 7 610 52 6 650
310 306 310 306 303 317
254 254 205 204 203 167
16.3 14.6 16.3 14.6 13.1 13.2
9.1 8.8 9.4 8.5 7.5 7.6
W10 x 112 x 100 x 88
32.9 29.4 25.9
11.36 10.415 11.10 10.340 10.84 10.265
1.250 1.120 0.990
0.755 0.680 0.605
W W W
W250 x 167 21 200 x 149 19 000 x 131 16 700
289 282 275
265 263 261
31.8 28.4 25.1
19.2 17.3 15.4
If a size is not listed, please contact for quoting. All sizes that are extrudable must fit into a 14" circle.
All non-extrudable sizes which can be produced by a combination extruding a tee and welding two tees together to produce an I-Beam.
PHONE: 800-949-4151 FAX: 724-847-7127
EMAIL: [email protected]
American Extruded Products
www.americanextrudedproducts.com
AMEREX
STANDARD STRUCTURALS 304 & 316 STAINLESS
R .375 (.313) .250
TYP. STAINLESS STEEL FILLET
SPECIFICATIONS: ASTM A-276, AMS-QQ-S-763 (for Extrusion only) ASTM A-479, DUPONT SW 300M R .125 (.090) .060 TYP. STAINLESS STEEL CORNER
I-BEAMS
"E" = EXTRUDED
"W" = WELDED (two extruded "Tees" are welded together)
Designation
Designation
Flange
(Nominal Depth in
Area A,
Depth d,
inches and
in.2
in.
Width bf, in.
Weight in
Web
Thickness tf, in.
Pounds per Linear Foot)
"A"
"B"
Thickness tf, in.A
Area A,
Depth d,
-OR-
metres and
mm2
mm
"W"
Mass in Kilo-
Width bf, mm
"D"
22.6 20.0 17.6 15.8 14.4 13.3 11.5 8.84 19.7 17.1 14.1 11.7 10.3 9.13 8.25 7.08 6.16 5.26 4.44 3.84
10.60 10.40 10.22 10.09 9.98 10.10 9.92 10.47 9.00 8.75 8.50 8.25 8.12 8.00 8.06 7.93 8.28 8.14 8.11 7.99
10.190 10.130 10.080 10.030 10.000 8.020 7.985 5.810 8.280 8.220 8.110 8.070 8.020 7.995 6.535 6.495 5.270 5.250 4.015 4.000
0.870 0.770 0.680 0.615 0.560 0.620 0.530 0.510 0.935 0.810 0.685 0.560 0.495 0.435 0.465 0.400 0.400 0.330 0.315 0.255
0.530 0.470 0.420 0.370 0.340 0.350 0.315 0.300 0.570 0.510 0.400 0.360 0.310 0.285 0.285 0.245 0.250 0.230 0.245 0.230
W6
x x x x x
25 20 15 16 12
7.34 5.87 4.43 4.74 3.55
6.38 6.20 5.99 6.28 6.03
6.080 6.020 5.990 4.030 4.000
0.455 0.365 0.260 0.405 0.280
W5
x x
19 16
5.54 4.68
5.15 5.01
5.030 5.000
W4
x
13
3.83
4.16
4.060
Metre)
W W W W W
Web
Thickness tf, mm
grams per
"C"
77 68 60 54 49 45 39 30 67 58 48 40 35 31 28 24 21 18 15 13
All sizes that are extrudable must fit into a 14" circle.
Depth in Milli-
"E"
A
W10 x x x x x x x x W8 x x x x x x x x x x x x
If a size is not listed, please contact for quoting.
Flange
(Nominal
"A"
"B"
Thickness tf, mmA
A
"C"
"D"
W W
W250 x x x x x x x x W200 x x x x x x x x x x x x
115 101 89 80 73 67 58 44.8 100 86 71 59 52 46.1 41.7 35.9 31.3 26.6 22.5 19.3
14 12 11 10 9 8 7 5 12 11 9 7 6 5 5 4 3 3 2 2
600 900 400 200 290 580 420 700 700 000 100 550 650 890 320 570 970 390 860 480
269 264 260 256 253 257 252 266 229 222 216 210 206 203 205 201 210 207 206 203
259 257 256 255 254 204 203 148 210 209 206 205 204 203 166 165 134 133 102 102
22.1 19.6 17.3 15.6 14.2 15.7 13.5 13.0 23.7 20.6 17.4 14.2 12.6 11.0 11.8 10.2 10.2 8.4 8.0 6.5
13.5 11.9 10.7 9.4 8.6 8.9 8.0 7.6 14.5 13.0 10.2 9.1 7.9 7.2 7.2 6.2 6.4 5.8 6.2 5.8
0.320 0.260 0.230 0.260 0.230
E E E E E
W150 x x x x x
37.1 29.8 22.5 24.0 18.0
4 3 2 3 2
740 790 860 060 290
162 157 152 160 153
154 153 152 102 102
11.6 9.3 6.6 10.3 7.1
8.1 6.6 5.8 6.6 5.8
0.430 0.360
0.270 0.240
E E
W130 x 28.1 x 23.8
3 590 3 040
131 127
128 127
10.9 9.1
6.9 6.1
0.345
0.280
E
W100 x 19.3
2 470
106
103
8.8
7.1
E or W E or W E or W E or W E or W E or W E or W E or W E or W
W W W W
All non-extrudable sizes which can be produced by a combination extruding a tee and welding two tees together to produce an I-Beam.
PHONE: 800-949-4151 FAX: 724-847-7127
EMAIL: [email protected]
American Extruded Products
www.americanextrudedproducts.com
AMEREX
STANDARD STRUCTURALS 304 & 316 STAINLESS
R .375 (.313) .250 TYP. STAINLESS STEEL FILLET
SPECIFICATIONS: ASTM A-276, AMS-QQ-S-763 (for Extrusion only) ASTM A-479, DUPONT SW 300M R .125 (.090) .060 TYP. STAINLESS STEEL CORNER
I-BEAMS
"E" = EXTRUDED
"W" = WELDED (two extruded "Tees" are welded together)
Designation
Designation
Flange
(Nominal Depth in
Area A,
Depth d,
inches and
in.2
in.
Width bf, in.
Weight in
Web
Thickness tf, in.
Pounds per Linear Foot)
Thickness tf, in.A
Flange
(Nominal Depth in Milli-
Area A,
Depth d,
-OR-
metres and
mm2
mm
"W"
Mass in Kilo-
"E"
A
Width bf, mm
"B"
"C"
"D"
Thickness tf, mm
grams per
"A"
Web
Metre)
"A"
"B"
Thickness tf, mmA
A
"C"
"D"
S12
x 50 x 40.8 x 35 x 31.8
14.7 12.0 10.3 9.35
12.00 12.00 12.00 12.00
5.477 5.252 5.078 5.000
0.659 0.659 0.544 0.544
0.687 W S310 0.462 W 0.428 E or W 0.350 E or W
x 74 x 60.7 x 52 x 47.3
9 7 6 6
480 740 650 030
305 305 305 305
139 133 129 127
16.7 16.7 13.8 13.8
17.4 11.7 10.9 8.9
S10
x 35 x 25.4
10.3 7.46
10.00 10.00
4.944 4.661
0.491 0.491
0.594 E or W S250 0.311 E or W
x 52 x 37.8
6 650 4 810
254 254
126 118
12.5 12.5
15.1 7.9
S8
x 23 x 18.4
6.77 5.41
8.00 8.00
4.171 4.001
0.425 0.425
0.441 E or W S200 0.271 E or W
x 34 x 27.4
4 370 3 480
203 203
106 102
10.8 10.8
11.2 6.9
S6
x 17.25 x 12.5
5.07 3.67
6.00 6.00
3.565 3.332
0.359 0.359
0.465 0.232
E E
S150
x 25.7 x 18.6
3 270 2 360
152 152
91 85
9.1 9.1
11.8 5.9
S5
x
10
2.94
5.00
3.004
0.326
0.214
E
S130
x
15
1 880
127
76
8.3
5.4
S4
x x
9.5 7.7
2.79 2.26
4.00 4.00
2.796 2.663
0.293 0.293
0.326 0.193
E E
S100
x 14.1 x 11.5
1 800 1 450
102 102
71 68
7.4 7.4
8.3 4.9
S3
x
7.5
2.21
3.00
2.509
0.260
0.349
E
S75
x 11.2
1 430
76
64
6.6
8.9
x 18.9
5.55
5.00
5.003
0.416
0.316 E or W M130 x 28.1
3 580
127
127
10.6
8.0
JR. BEAM
M5
If a size is not listed, please contact for quoting. All sizes that are extrudable must fit into a 14" circle.
All non-extrudable sizes which can be produced by a combination extruding a tee and welding two tees together to produce an I-Beam.
PHONE: 800-949-4151 FAX: 724-847-7127
EMAIL: [email protected]
American Extruded Products
www.americanextrudedproducts.com
AMEREX
STANDARD STRUCTURALS 304 & 316 STAINLESS
SPECIFICATIONS: ASTM A-276, AMS-QQ-S-763 (for Extrusion only) ASTM A-479, DUPONT SW 300M
"C" CHANNELS "E" = EXTRUDED
Depth in
Area A,
Depth d,
inches and
in.2
in.
Width bf, in.
Weight in
Web
Thickness tf,
Pounds per
Flange
(Nominal
Thickness tf,
"E"
Depth in Milli-
Area A,
Depth d,
-OR-
metres and
mm2
mm
in.A
"W"
Mass in Kilo-
in.A
Linear Foot)
R .125 (.090) .060
Designation
Flange
(Nominal
TYP. STAINLESS STEEL FILLET
TYP. STAINLESS STEEL CORNER
"W" = WELDED (two extruded angles are welded together)
Designation
R .375 (.313) .250
Width bf, mm
"B"
"C"
"D"
Thickness tf,
mmA
mmA
grams per
"A"
Web Thickness tf,
Metre)
"A"
"B"
"C"
"D"
C15
X X X
50 40 33.9
14.7 11.8 9.96
15.00 15.00 15.00
3.716 3.520 3.400
0.650 0.650 0.650
0.716 0.520 0.400
W W W
C380
X X X
74 60 50.4
9 480 7 610 6 430
381 381 381
94 89 86
16.5 16.5 16.5
18.2 13.2 10.2
C12
X X
30 25
8.82 7.35
12.00 12.00
3.170 3.047
0.501 0.501
0.510 0.387
W W
C310
X X
45 37
5 690 4 740
305 305
80 77
12.7 12.7
13.0 9.8
C10
X X X X
30 25 20 15.3
8.82 7.35 5.88 4.49
10.00 10.00 10.00 10.00
3.033 2.886 2.739 2.600
0.436 0.436 0.436 0.436
0.673 E or W C250 0.526 E or W 0.379 E or W 0.240 W
X X X X
45 37 30 22.8
5 4 3 2
690 740 790 900
254 254 254 254
76 73 69 65
11.1 11.1 11.1 11.1
17.1 13.4 9.6 6.1
C9
X X
20 15
5.88 4.41
9.00 9.00
2.648 2.485
0.413 0.413
0.448 E or W C230 0.285 E or W
X X
30 22
3 790 2 850
229 229
67 63
10.5 10.5
11.4 7.2
C8
X 18.75 X 13.75
5.51 4.04
8.00 8.00
2.527 2.343
0.390 0.390
0.487 E or W C200 0.303 E or W
X X
27.9 20.5
3 550 2 610
203 203
64 59
9.9 9.9
12.4 7.7
C7
X 14.75 X 12.25 X 9.8
4.33 3.60 2.87
7.00 7.00 7.00
2.299 2.194 2.090
0.366 0.366 0.366
0.419 E or W C180 0.314 E or W 0.210 E
X X X
22 18.2 14.6
2 790 2 320 1 850
178 178 178
58 55 53
9.3 9.3 9.3
10.6 8.0 5.3
C6
X X X
13 10.5 8.2
3.83 3.09 2.40
6.00 6.00 6.00
2.157 2.034 1.920
0.343 0.343 0.343
0.437 0.314 0.200
E E E
C150
X X X
19.3 15.6 12.2
2 470 1 990 1 550
152 152 152
54 51 48
8.7 8.7 8.7
11.1 8.0 5.1
C5
X X
9 6.7
2.64 1.97
5.00 5.00
1.885 1.750
0.320 0.320
0.325 0.190
E E
C130
X X
13 10.4
1 700 1 270
127 127
47 44
8.1 8.1
8.3 4.8
C4
X X X
7.25 5.4 6.25
2.13 1.59 1.84
4.00 4.00 4.00
1.721 1.584 1.647
0.296 0.296 0.296
0.321 0.184 0.247
E E E
C100
X X X
10.8 8
1 370 1 030 1 187
102 102 102
43 40 42
7.5 7.5 7.5
8.2 4.7 6.3
C3
X X
6 5
1.76 1.47
3.00 3.00
1.596 1.498
0.273 0.273
0.356 0.258
E E
C75
X X
8.9 7.4
1 130 948
76 76
40 37
6.9 6.9
9.0 6.6
If a size is not listed, please contact for quoting. All sizes that are extrudable must fit into a 14" circle.
All non-extrudable sizes which can be produced by a combination extruding a tee and welding two tees together to produce an I-Beam.
PHONE: 800-949-4151 FAX: 724-847-7127
EMAIL: [email protected]
American Extruded Products
www.americanextrudedproducts.com
AMEREX
STANDARD STRUCTURALS 304 & 316 STAINLESS
R .375 (.313) .250
SPECIFICATIONS: ASTM A-276, AMS-QQ-S-763 (for Extrusion only) ASTM A-479, DUPONT SW 300M
TYP. STAINLESS STEEL FILLET
R .125 (.090) .060
"C" CHANNELS "E" = EXTRUDED
"W" = WELDED (two extruded angles are welded together)
Designation
Designation
Flange
(Nominal Depth in
Area A,
Depth d,
inches and
in.2
in.
Width bf, in.
Weight in
Web
Thickness tf, in.
Pounds per Linear Foot)
Thickness tf, in.A
Depth in Milli-
Area A,
Depth d,
-OR-
metres and
mm2
mm
"W"
Mass in Kilo-
"E"
Width bf, mm
"B"
"C"
"D"
14.7 13.2 11.8 10.3 9.12
12.00 12.00 12.00 12.00 12.00
4.135 4.010 3.890 3.765 3.670
0.700 0.700 0.700 0.700 0.700
0.835 0.710 0.590 0.465 0.370
MC10 X X X X X
41.1 33.6 28.5 25 22
12.1 9.87 8.37 7.35 6.45
10.00 10.00 10.00 10.00 10.00
4.321 4.100 3.950 3.405 3.315
0.575 0.575 0.575 0.575 0.575
0.796 0.575 0.425 0.380 0.290
MC9
X X
25.4 23.9
7.47 7.02
9.00 9.00
3.500 3.450
MC8
X X X X
22.8 21.4 20 18.7
6.70 6.28 5.88 5.50
8.00 8.00 8.00 8.00
MC7
X X
22.7 19.1
6.67 5.61
MC6
X X X X X
18 15.3 16.3 15.1 12
5.29 4.50 4.79 4.44 3.53
MC310 X X X X X
Thickness tf,
mmA
mm
Metre)
W W W W W
Web Thickness tf,
A
grams per
"A"
50 45 40 35 31
ll sizes that are extrudable must fit into a 14" circle.
Flange
(Nominal
A
MC12 X X X X X
If a size is not listed, please contact for quoting.
TYP. STAINLESS STEEL CORNER
"A"
"B"
"C"
"D"
74 67 60 52 46
9 8 7 6 5
480 502 610 620 890
305 305 305 305 305
105 102 98 96 93
17.8 17.8 17.8 17.8 17.8
21.2 18.0 15.0 11.8 9.4
X X X X X
61.2 50 42.4 37 33
7 6 5 4 4
810 370 400 740 160
254 254 254 254 254
110 104 100 86 84
14.6 14.6 14.6 14.6 14.6
20.2 14.6 10.8 9.7 7.4
0.550 0.550
0.450 E or W MC230 X 0.400 E or W X
37.8 35.6
4 820 4 530
229 229
88 87
14.0 14.0
11.4 10.2
3.502 3.450 3.025 2.978
0.525 0.525 0.500 0.500
0.427 0.375 0.400 0.353
X X X X
33.9 31.8 29.8 27.8
4 4 3 3
320 050 790 550
203 203 203 203
88 87 76 75
13.3 13.3 12.7 12.7
10.8 9.5 10.2 9.0
7.00 7.00
3.603 3.452
0.500 0.500
0.503 E or W MC180 X 0.352 E or W X
33.8 28.4
4 300 3 620
178 178
91 87
12.7 12.7
12.8 8.9
6.00 6.00 6.00 6.00 6.00
3.504 3.500 3.000 2.941 2.497
0.475 0.385 0.475 0.475 0.375
0.379 0.340 0.375 0.316 0.310
26.8 22.8 24.3 22.5 17.9
3 2 3 2 2
152 152 152 152 152
88 88 76 74 63
12.1 9.8 12.1 12.1 9.5
9.6 8.6 9.5 8.0 7.9
E or W MC250 E or W E or W E or W E or W
E or W MC200 E or W E or W E or W
E E E E E
MC150 X X X X X
All non-extrudable sizes which can be produced by a combination extruding a tee and welding two tees together to produce an I-Beam.
410 900 090 860 280
PHONE: 800-949-4151 FAX: 724-847-7127
EMAIL: [email protected]
American Extruded Products
www.americanextrudedproducts.com
AMEREX
R .125 (.090) .060
STANDARD STRUCTURALS 304 & 316 STAINLESS
TYP. STAINLESS STEEL CORNER
R .375 (.313) .250
SPECIFICATIONS: ASTM A-276, AMS-QQ-S-763 ASTM A-479, DUPONT SW 300M
TYP. STAINLESS STEEL FILLET
ANGLES Size and Thickness, in. "A"
"B"
"C"
Weight per Foot, lb.
Size and Thickness, mm.
Area, in.2 "A"
"B"
"C"
Mass per Metre, kg
Area, mm2
L8 L8
x x
8 x 3/4 8 x 1/2
39.0 26.4
11.45 7.77
L203 x L203 x
203 x 19.1 203 x 12.7
58.0 39.3
7 390 5 010
L6
x
6 x 3/8
14.9
4.38
L152 x
152 x
9.5
22.2
2 821
L6
x
5 x 1/2
17.9
5.27
L152 x
127 x 12.7
26.7
3 395
L6 L6 L6
x x x
4 x 1/2 4 x 3/8 4 x 1/4
16.1 12.3 9.2
4.77 3.63 2.46
L152 x L152 x L152 x
102 x 12.7 102 x 9.5 102 x 6.35
24.0 18.3 13.7
3 072 2 337 1 581
L6
x 3 1/2 x 3/8
11.6
3.44
L152 x
89 x
9.5
17.3
2 216
L6
x
3 x 3/8
11.1
3.25
L152 x
76 x
9.5
16.6
2 095
L6
x
2 x 1/4
6.7
1.95
L152 x
51 x
6.4
9.9
1 258
L5 L5 L5 L5 L5 L5 L5
x x x x x x x
5 5 5 5 5 5 5
27.2 23.6 20.0 16.2 14.3 12.3 10.3
7.98 6.94 5.86 4.75 4.18 3.61 3.03
L127 L127 L127 L127 L127 L127 L127
x x x x x x x
22.2 19.0 15.9 12.7 11.1 9.5 7.9
40.5 35.1 29.8 24.1 21.3 18.3 15.3
5 4 3 3 2 2 1
L5
x 3 1/2 x 3/8
10.4
3.06
L127 x
90 x
9.5
15.5
1 974
L5 L5
x x
3 x 3/8 3 x 1/4
9.8 6.6
2.88 1.95
L127 x L127 x
76 x 76 x
9.5 6.4
14.6 9.9
1 853 1 258
L4 L4 L4 L4 L4 L4 L4
x x x x x x x
4 4 4 4 4 4 4
x x x x x x x
3/4 5/8 1/2 7/16 3/8 5/16 1/4
18.5 15.7 12.8 11.3 9.8 8.2 6.6
5.44 4.61 3.75 3.31 2.86 2.40 1.94
L102 L102 L102 L102 L102 L102 L102
x x x x x x x
102 102 102 102 102 102 102
19.0 15.9 12.7 11.1 9.5 7.9 6.4
27.5 23.4 19.0 16.8 14.6 12.2 9.8
3 2 2 2 1 1 1
510 970 420 140 850 550 250
L4 L4 L4 L4
x x x x
3 1/2 3 1/2 3 1/2 3 1/2
x x x x
1/2 3/8 5/16 1/4
11.9 9.1 7.7 6.2
3.50 2.67 2.25 1.81
L102 L102 L102 L102
x x x x
89 89 89 89
x 12.7 x 9.5 x 7.9 x 6.4
17.6 13.5 11.4 9.2
2 1 1 1
260 720 450 170
L4 L4 L4
x x x
13.6 11.1 8.5
3.98 3.25 2.48
L102 x L102 x L102 x
76 x 15.9 76 x 12.7 76 x 9.5
20.2 16.4 12.6
2 570 2 100 1 600
x x x x x x x
7/8 3/4 5/8 1/2 7/16 3/8 5/16
3 x 5/8 3 x 1/2 3 x 3/8
If a size is not listed, please contact for quoting.
x x x x x x x
127 127 127 127 127 127 127
All sizes that are extrudable must fit into a 14" circle.
x x x x x x x
150 480 780 070 700 330 960
If required, tapered leg can be produced.
PHONE: 800-949-4151 FAX: 724-847-7127
EMAIL: [email protected]
American Extruded Products
www.americanextrudedproducts.com
AMEREX
R .125 (.090) .060
STANDARD STRUCTURALS 304 & 316 STAINLESS
TYP. STAINLESS STEEL CORNER
R .375 (.313) .250
SPECIFICATIONS: ASTM A-276, AMS-QQ-S-763 ASTM A-479, DUPONT SW 300M
TYP. STAINLESS STEEL FILLET
ANGLES Size and Thickness, in. "A"
"B"
"C"
L4 L4
x x
3 x 5/16 3 x 1/4
L3 1/2 L3 1/2 L3 1/2 L3 1/2
x x x x
3 1/2 3 1/2 3 1/2 3 1/2
x x x x
L3 1/2 L3 1/2 L3 1/2 L3 1/2 L3 1/2
x x x x x
3 3 3 3 3
L3 1/2 L3 1/2 L3 1/2 L3 1/2
x x x x
L3 L3 L3 L3 L3
Weight per Foot, lb.
Size and Thickness, mm.
Area, in.2 "A"
"B"
"C"
7.2 5.8
2.09 1.69
L102 x L102 x
76 x 76 x
1/2 3/8 5/16 1/4
11.1 8.5 7.2 5.8
3.25 2.48 2.09 1.69
L89 L89 L89 L89
x x x x
x x x x x
1/2 7/16 3/8 5/16 1/4
10.2 9.1 7.9 6.6 5.4
3.00 2.65 2.30 1.93 1.56
L89 L89 L89 L89 L89
2 1/2 2 1/2 2 1/2 2 1/2
x x x x
1/2 3/8 5/16 1/4
9.4 7.2 6.1 4.9
2.75 2.11 1.78 1.44
x x x x x
3 3 3 3 3
x x x x x
1/2 7/16 3/8 5/16 1/4
9.4 8.3 7.2 6.1 4.9
L3 L3 L3 L3 L3 L3
x x x x x x
2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2
x x x x x x
1/2 7/16 3/8 5/16 1/4 3/16
L3 L3 L3 L3 L3
x x x x x
2 2 2 2 2
x x x x x
1/2 3/8 5/16 1/4 3/16
L3 L2 1/2 L2 1/2 L2 1/2 L2 1/2
Mass per Metre, kg
Area, mm2
7.9 6.4
10.7 8.6
1 350 1 090
89 89 89 89
x 12.7 x 9.5 x 7.9 x 6.4
16.5 12.6 10.7 8.6
2 1 1 1
100 600 350 090
x x x x x
76 76 76 76 76
x 12.7 x 11.1 x 9.5 x 7.9 x 6.4
15.1 13.5 11.7 9.8 8.0
1 1 1 1 1
940 710 480 250 010
L89 L89 L89 L89
x x x x
64 64 64 64
x x x x
12.7 9.5 7.9 6.4
13.9 10.7 9.0 7.3
1 770 1 360 1 150 929
2.75 2.43 2.11 1.78 1.44
L76 L76 L76 L76 L76
x x x x x
76 76 76 76 76
x 12.7 x 11.1 x 9.5 x 7.9 x 6.4
14.0 12.4 10.7 9.1 7.3
1 1 1 1
770 570 360 150 929
8.5 7.6 6.6 5.6 4.5 3.4
2.50 2.21 1.92 1.62 1.31 1.00
L76 L76 L76 L76 L76 L76
x x x x x x
64 64 64 64 64 64
x 12.7 x 11.1 x 9.5 x 7.9 x 6.4 x 4.8
12.6 11.3 9.8 8.3 6.7 5.1
1 1 1 1
610 430 240 050 845 643
7.7 5.9 5.0 4.1 3.1
2.25 1.73 1.46 1.19 0.91
L76 L76 L76 L76 L76
x x x x x
51 51 51 51 51
x 12.7 x 9.5 x 7.9 x 6.4 x 4.8
11.5 8.8 7.4 6.1 4.6
1 450 1 120 942 768 582
x 1 1/2 x 1/4
3.6
1.08
L76
38
6.4
5.4
694
x x x x
7.7 5.9 5.0 4.1
2.25 1.73 1.46 1.19
L64 L64 L64 L64
12.7 9.5 7.9 6.4
11.4 8.7 7.4 6.1
1 450 1 120 942 768
2 1/2 2 1/2 2 1/2 2 1/2
x x x x
1/2 3/8 5/16 1/4
If a size is not listed, please contact for quoting.
x x x x
All sizes that are extrudable must fit into a 14" circle.
64 64 64 64
x x x x
If required, tapered leg can be produced.
PHONE: 800-949-4151 FAX: 724-847-7127
EMAIL: [email protected]
American Extruded Products
www.americanextrudedproducts.com
AMEREX
R .125 (.090) .060
STANDARD STRUCTURALS 304 & 316 STAINLESS
TYP. STAINLESS STEEL CORNER
R .375 (.313) .250
SPECIFICATIONS: ASTM A-276, AMS-QQ-S-763 ASTM A-479, DUPONT SW 300M
TYP. STAINLESS STEEL FILLET
ANGLES Size and Thickness, in. "A"
"B"
"C"
Weight per Foot, lb.
Size and Thickness, mm.
Area, in.2 "A"
"B"
"C"
Mass per Metre, kg
Area, mm2
L2 1/2 x 2 1/2 x 3/16
3.1
0.90
L64
x
64 x
4.8
4.6
581
L2 1/2 L2 1/2 L2 1/2 L2 1/2
5.3 4.5 3.6 2.8
1.55 1.31 1.06 0.81
L64 L64 L64 L64
x x x x
51 51 51 51
9.5 7.9 6.4 4.8
7.9 6.7 5.4 4.2
1 000 845 684 522
L2 1/2 x 1 3/4 x 3/8
4.9
1.47
L64
44
9.5
7.3
946
L2 1/2 x 1 1/2 x 1/4 L2 1/2 x 1 1/2 x 3/16
3.2 2.4
0.94 0.72
L64 L64
x x
38 x 38 x
6.4 4.8
4.8 3.6
605 461
L2 L2 L2 L2
x x x x
3/8 5/16 1/4 3/16
4.7 3.9 3.2 2.4
1.36 1.15 0.94 0.72
L51 L51 L51 L51
x x x x
51 51 51 51
x x x x
9.5 7.9 6.4 4.8
7.0 5.8 4.7 3.6
877 742 605 461
L2 L2
x 1 1/2 x 1/4 x 1 1/2 x 3/16
2.8 2.1
0.82 0.63
L51 L51
x x
38 x 38 x
6.4 4.8
4.2 3.1
525 401
L1 3/4 x 1 3/4 x 1/4 L1 3/4 x 1 3/4 x 3/16
2.8 2.1
0.81 0.62
L44 L44
x x
44 x 44 x
6.4 4.8
4.1 3.1
525 401
L1 1/2 x 1 1/2 x 1/4 L1 1/2 x 1 1/2 x 3/16 L1 1/2 x 1 1/2 x 5/32
2.3 1.8 1.5
0.69 0.53 0.45
L38 L38 L38
x x x
38 x 38 x 38 x
6.4 4.8 4.0
3.4 2.7 2.2
444 340 286
L1 1/4 x 1 1/4 x 1/4 L1 1/4 x 1 1/4 x 3/16
1.9 1.5
0.57 0.44
L32 L32
x x
32 x 32 x
6.4 4.8
2.8 2.2
363 280
L1 1/4 x 1 3/4 x 3/16
1.7
0.54
L32
x
44 x
4.8
2.6
349
L1
x
2 x 1/4
2.3
0.70
L25
x
51 x
6.4
3.5
452
L1 L1
x x
1 x 1/4 1 x 3/16
1.5 1.2
0.44 0.34
L25 L25
x x
25 x 25 x
6.4 4.8
2.2 1.8
283 219
x x x x
2 2 2 2
2 2 2 2
x x x x
x x x x
3/8 5/16 1/4 3/16
If a size is not listed, please contact for quoting.
All sizes that are extrudable must fit into a 14" circle.
x x x x
If required, tapered leg can be produced.
PHONE: 800-949-4151 FAX: 724-847-7127
EMAIL: [email protected]
American Extruded Products
www.americanextrudedproducts.com
AMEREX STANDARD STRUCTURALS 304 & 316 STAINLESS
R .375 (.313) .250 TYP. STAINLESS STEEL FILLET
SPECIFICATIONS: ASTM A-276, AMS-QQ-S-763 ASTM A-479, DUPONT SW 300M
R .125 (.090) .060
TEES SIZE (BY DIMENSION) (IN.) A B CxD 1" 1.625" 1.5" 1.5" 1.625" 2" 2" 2.5" 3" 3" 3" 4" 4" 4" 4" 5" 5" 5" 5" 5" 5" 5" 6" 6" 6" 6" 6" 6" 6" 6" 6" 7" 7" 7" 7" 7" 7" 7" 7" 7" 7" 7" 7" 8" 8" 8"
If a size is not listed, please contact for quoting.
1" 1.375" 1.5" 1.5" 2.625" 2" 3" 2.5" 2.5" 3" 3" 3" 3" 4" 4" 4" 4" 4" 5" 5" 5" 5" 4" 4" 4" 5" 5" 5" 6" 6" 6" 4" 4" 4" 5" 5" 5" 6" 6" 6" 7" 7" 7" 6" 6" 6"
.250" .250" .188" .250" .375" .250" .250" .250" .375" .250" .375" .188" .250" .250" .375" .250" .375" .500" .250" .375" .500" .750" .375" .500" .750" .375" .500" .750" .375" .500" .750" .375" .500" .750" .375" .500" .750" .375" .500" .750" .375" .500" .750" .375" .500" .750"
WEIGHT PER FOOT, lb.
1.6 2.5 1.9 2.5 5.0 3.3 4.2 4.2 6.6 5.0 7.3 4.5 5.9 6.7 9.9 7.6 11.2 14.6 8.4 12.4 16.3 23.7 12.4 16.3 23.7 13.7 18.0 26.3 15.0 19.7 28.8 13.7 18.0 26.3 15.0 19.7 28.8 16.3 21.4 31.4 17.5 23.1 33.9 17.5 23.1 33.9
TYP. STAINLESS STEEL CORNER
SIZE (BY DIMENSION) (MM) A B CxD 25.4 41.3 38.1 38.1 41.3 50.8 50.8 63.5 76.2 76.2 76.2 101.6 101.6 101.6 101.6 127 127 127 127 127 127 127 152.4 152.4 152.4 152.4 152.4 152.4 152.4 152.4 152.4 177.8 177.8 177.8 177.8 177.8 177.8 177.8 177.8 177.8 177.8 177.8 177.8 203.2 203.2 203.2
All sizes that are extrudable must fit into a 14" circle.
25.4 34.9 38.1 38.1 66.7 50.8 76.2 63.5 63.5 76.2 76.2 76.2 76.2 101.6 101.6 101.6 101.6 101.6 127 127 127 127 101.6 101.6 101.6 127 127 127 152.4 152.4 152.4 101.6 101.6 101.6 127 127 127 152.4 152.4 152.4 177.8 177.8 177.8 152.4 152.4 152.4
6.4 6.4 4.8 6.4 9.5 6.4 6.4 6.4 9.5 6.4 9.5 4.8 6.4 6.4 9.5 6.4 9.5 12.7 6.4 9.5 12.7 19.1 9.5 12.7 19.1 9.5 12.7 19.1 9.5 12.7 19.1 9.5 12.7 19.1 9.5 12.7 19.1 9.5 12.7 19.1 9.5 12.7 19.1 9.5 12.7 19.1
MASS PER METRE, kg. 2.4 3.7 2.8 3.7 7.4 4.9 6.2 6.2 9.8 7.5 10.9 6.7 8.7 10.0 14.7 11.3 16.6 21.7 12.5 18.5 24.2 35.3 18.5 24.2 35.3 20.4 26.8 39.1 22.3 29.3 42.9 20.4 26.8 39.1 22.3 29.3 42.9 24.2 31.8 46.7 26.1 34.4 50.5 26.1 34.4 50.5
EMAIL: [email protected]
American Extruded Products
www.americanextrudedproducts.com
AMEREX
STANDARD STRUCTURALS 304 & 316 STAINLESS
R .375 (.313) .250 TYP. STAINLESS STEEL FILLET
R .125 (.090) SPECIFICATIONS: ASTM A-276, AMS-QQ-S-763 .060 (for Extrusion only) ASTM A-479, DUPONT SW 300M TYP. STAINLESS STEEL CORNER
I-BEAMS "E" = EXTRUDED
"W" = WELDED (two extruded "Tees" are welded together)
Designation
Designation
Flange
(Nominal Depth in
Area A,
Depth d,
inches and
in.2
in.
Width bf, in.
Weight in
Web
Thickness tf, in.
Pounds per Linear Foot)
"A"
"B"
Flange
(Nominal
Thickness tf,
"E"
Depth in Milli-
Area A,
Depth d,
-OR-
metres and
mm2
mm
in.A
"W"
Mass in Kilo-
A
Width bf, mm
"D"
Thickness tf, mm
grams per
"C"
Web
Metre)
"A"
"B"
Thickness tf, mmA
A
"C"
"D"
WIDE FLANGE
W12 x x x x x x
58 53 50 45 40 35
17.0 15.6 14.7 13.2 11.8 10.3
12.19 10.010 12.06 9.995 12.19 8.080 12.06 8.045 11.94 8.005 12.50 6.560
0.640 0.575 0.640 0.575 0.515 0.520
0.360 0.345 0.370 0.335 0.295 0.300
W W W W W W
W310 x x x x x x
86 11 000 79 10 100 74 9 480 67 8 520 60 7 610 52 6 650
310 306 310 306 303 317
254 254 205 204 203 167
16.3 14.6 16.3 14.6 13.1 13.2
9.1 8.8 9.4 8.5 7.5 7.6
W10 x 112 x 100 x 88
32.9 29.4 25.9
11.36 10.415 11.10 10.340 10.84 10.265
1.250 1.120 0.990
0.755 0.680 0.605
W W W
W250 x 167 21 200 x 149 19 000 x 131 16 700
289 282 275
265 263 261
31.8 28.4 25.1
19.2 17.3 15.4
If a size is not listed, please contact for quoting. All sizes that are extrudable must fit into a 14" circle.
All non-extrudable sizes which can be produced by a combination extruding a tee and welding two tees together to produce an I-Beam.
PHONE: 800-949-4151 FAX: 724-847-7127
EMAIL: [email protected]
American Extruded Products
www.americanextrudedproducts.com
AMEREX
STANDARD STRUCTURALS 304 & 316 STAINLESS
R .375 (.313) .250
TYP. STAINLESS STEEL FILLET
SPECIFICATIONS: ASTM A-276, AMS-QQ-S-763 (for Extrusion only) ASTM A-479, DUPONT SW 300M R .125 (.090) .060 TYP. STAINLESS STEEL CORNER
I-BEAMS
"E" = EXTRUDED
"W" = WELDED (two extruded "Tees" are welded together)
Designation
Designation
Flange
(Nominal Depth in
Area A,
Depth d,
inches and
in.2
in.
Width bf, in.
Weight in
Web
Thickness tf, in.
Pounds per Linear Foot)
"A"
"B"
Thickness tf, in.A
Area A,
Depth d,
-OR-
metres and
mm2
mm
"W"
Mass in Kilo-
Width bf, mm
"D"
22.6 20.0 17.6 15.8 14.4 13.3 11.5 8.84 19.7 17.1 14.1 11.7 10.3 9.13 8.25 7.08 6.16 5.26 4.44 3.84
10.60 10.40 10.22 10.09 9.98 10.10 9.92 10.47 9.00 8.75 8.50 8.25 8.12 8.00 8.06 7.93 8.28 8.14 8.11 7.99
10.190 10.130 10.080 10.030 10.000 8.020 7.985 5.810 8.280 8.220 8.110 8.070 8.020 7.995 6.535 6.495 5.270 5.250 4.015 4.000
0.870 0.770 0.680 0.615 0.560 0.620 0.530 0.510 0.935 0.810 0.685 0.560 0.495 0.435 0.465 0.400 0.400 0.330 0.315 0.255
0.530 0.470 0.420 0.370 0.340 0.350 0.315 0.300 0.570 0.510 0.400 0.360 0.310 0.285 0.285 0.245 0.250 0.230 0.245 0.230
W6
x x x x x
25 20 15 16 12
7.34 5.87 4.43 4.74 3.55
6.38 6.20 5.99 6.28 6.03
6.080 6.020 5.990 4.030 4.000
0.455 0.365 0.260 0.405 0.280
W5
x x
19 16
5.54 4.68
5.15 5.01
5.030 5.000
W4
x
13
3.83
4.16
4.060
Metre)
W W W W W
Web
Thickness tf, mm
grams per
"C"
77 68 60 54 49 45 39 30 67 58 48 40 35 31 28 24 21 18 15 13
All sizes that are extrudable must fit into a 14" circle.
Depth in Milli-
"E"
A
W10 x x x x x x x x W8 x x x x x x x x x x x x
If a size is not listed, please contact for quoting.
Flange
(Nominal
"A"
"B"
Thickness tf, mmA
A
"C"
"D"
W W
W250 x x x x x x x x W200 x x x x x x x x x x x x
115 101 89 80 73 67 58 44.8 100 86 71 59 52 46.1 41.7 35.9 31.3 26.6 22.5 19.3
14 12 11 10 9 8 7 5 12 11 9 7 6 5 5 4 3 3 2 2
600 900 400 200 290 580 420 700 700 000 100 550 650 890 320 570 970 390 860 480
269 264 260 256 253 257 252 266 229 222 216 210 206 203 205 201 210 207 206 203
259 257 256 255 254 204 203 148 210 209 206 205 204 203 166 165 134 133 102 102
22.1 19.6 17.3 15.6 14.2 15.7 13.5 13.0 23.7 20.6 17.4 14.2 12.6 11.0 11.8 10.2 10.2 8.4 8.0 6.5
13.5 11.9 10.7 9.4 8.6 8.9 8.0 7.6 14.5 13.0 10.2 9.1 7.9 7.2 7.2 6.2 6.4 5.8 6.2 5.8
0.320 0.260 0.230 0.260 0.230
E E E E E
W150 x x x x x
37.1 29.8 22.5 24.0 18.0
4 3 2 3 2
740 790 860 060 290
162 157 152 160 153
154 153 152 102 102
11.6 9.3 6.6 10.3 7.1
8.1 6.6 5.8 6.6 5.8
0.430 0.360
0.270 0.240
E E
W130 x 28.1 x 23.8
3 590 3 040
131 127
128 127
10.9 9.1
6.9 6.1
0.345
0.280
E
W100 x 19.3
2 470
106
103
8.8
7.1
E or W E or W E or W E or W E or W E or W E or W E or W E or W
W W W W
All non-extrudable sizes which can be produced by a combination extruding a tee and welding two tees together to produce an I-Beam.
PHONE: 800-949-4151 FAX: 724-847-7127
EMAIL: [email protected]
American Extruded Products
www.americanextrudedproducts.com
AMEREX
STANDARD STRUCTURALS 304 & 316 STAINLESS
R .375 (.313) .250 TYP. STAINLESS STEEL FILLET
SPECIFICATIONS: ASTM A-276, AMS-QQ-S-763 (for Extrusion only) ASTM A-479, DUPONT SW 300M R .125 (.090) .060 TYP. STAINLESS STEEL CORNER
I-BEAMS
"E" = EXTRUDED
"W" = WELDED (two extruded "Tees" are welded together)
Designation
Designation
Flange
(Nominal Depth in
Area A,
Depth d,
inches and
in.2
in.
Width bf, in.
Weight in
Web
Thickness tf, in.
Pounds per Linear Foot)
Thickness tf, in.A
Flange
(Nominal Depth in Milli-
Area A,
Depth d,
-OR-
metres and
mm2
mm
"W"
Mass in Kilo-
"E"
A
Width bf, mm
"B"
"C"
"D"
Thickness tf, mm
grams per
"A"
Web
Metre)
"A"
"B"
Thickness tf, mmA
A
"C"
"D"
S12
x 50 x 40.8 x 35 x 31.8
14.7 12.0 10.3 9.35
12.00 12.00 12.00 12.00
5.477 5.252 5.078 5.000
0.659 0.659 0.544 0.544
0.687 W S310 0.462 W 0.428 E or W 0.350 E or W
x 74 x 60.7 x 52 x 47.3
9 7 6 6
480 740 650 030
305 305 305 305
139 133 129 127
16.7 16.7 13.8 13.8
17.4 11.7 10.9 8.9
S10
x 35 x 25.4
10.3 7.46
10.00 10.00
4.944 4.661
0.491 0.491
0.594 E or W S250 0.311 E or W
x 52 x 37.8
6 650 4 810
254 254
126 118
12.5 12.5
15.1 7.9
S8
x 23 x 18.4
6.77 5.41
8.00 8.00
4.171 4.001
0.425 0.425
0.441 E or W S200 0.271 E or W
x 34 x 27.4
4 370 3 480
203 203
106 102
10.8 10.8
11.2 6.9
S6
x 17.25 x 12.5
5.07 3.67
6.00 6.00
3.565 3.332
0.359 0.359
0.465 0.232
E E
S150
x 25.7 x 18.6
3 270 2 360
152 152
91 85
9.1 9.1
11.8 5.9
S5
x
10
2.94
5.00
3.004
0.326
0.214
E
S130
x
15
1 880
127
76
8.3
5.4
S4
x x
9.5 7.7
2.79 2.26
4.00 4.00
2.796 2.663
0.293 0.293
0.326 0.193
E E
S100
x 14.1 x 11.5
1 800 1 450
102 102
71 68
7.4 7.4
8.3 4.9
S3
x
7.5
2.21
3.00
2.509
0.260
0.349
E
S75
x 11.2
1 430
76
64
6.6
8.9
x 18.9
5.55
5.00
5.003
0.416
0.316 E or W M130 x 28.1
3 580
127
127
10.6
8.0
JR. BEAM
M5
If a size is not listed, please contact for quoting. All sizes that are extrudable must fit into a 14" circle.
All non-extrudable sizes which can be produced by a combination extruding a tee and welding two tees together to produce an I-Beam.
PHONE: 800-949-4151 FAX: 724-847-7127
EMAIL: [email protected]
American Extruded Products
www.americanextrudedproducts.com
AMEREX
STANDARD STRUCTURALS 304 & 316 STAINLESS
SPECIFICATIONS: ASTM A-276, AMS-QQ-S-763 (for Extrusion only) ASTM A-479, DUPONT SW 300M
"C" CHANNELS "E" = EXTRUDED
Depth in
Area A,
Depth d,
inches and
in.2
in.
Width bf, in.
Weight in
Web
Thickness tf,
Pounds per
Flange
(Nominal
Thickness tf,
"E"
Depth in Milli-
Area A,
Depth d,
-OR-
metres and
mm2
mm
in.A
"W"
Mass in Kilo-
in.A
Linear Foot)
R .125 (.090) .060
Designation
Flange
(Nominal
TYP. STAINLESS STEEL FILLET
TYP. STAINLESS STEEL CORNER
"W" = WELDED (two extruded angles are welded together)
Designation
R .375 (.313) .250
Width bf, mm
"B"
"C"
"D"
Thickness tf,
mmA
mmA
grams per
"A"
Web Thickness tf,
Metre)
"A"
"B"
"C"
"D"
C15
X X X
50 40 33.9
14.7 11.8 9.96
15.00 15.00 15.00
3.716 3.520 3.400
0.650 0.650 0.650
0.716 0.520 0.400
W W W
C380
X X X
74 60 50.4
9 480 7 610 6 430
381 381 381
94 89 86
16.5 16.5 16.5
18.2 13.2 10.2
C12
X X
30 25
8.82 7.35
12.00 12.00
3.170 3.047
0.501 0.501
0.510 0.387
W W
C310
X X
45 37
5 690 4 740
305 305
80 77
12.7 12.7
13.0 9.8
C10
X X X X
30 25 20 15.3
8.82 7.35 5.88 4.49
10.00 10.00 10.00 10.00
3.033 2.886 2.739 2.600
0.436 0.436 0.436 0.436
0.673 E or W C250 0.526 E or W 0.379 E or W 0.240 W
X X X X
45 37 30 22.8
5 4 3 2
690 740 790 900
254 254 254 254
76 73 69 65
11.1 11.1 11.1 11.1
17.1 13.4 9.6 6.1
C9
X X
20 15
5.88 4.41
9.00 9.00
2.648 2.485
0.413 0.413
0.448 E or W C230 0.285 E or W
X X
30 22
3 790 2 850
229 229
67 63
10.5 10.5
11.4 7.2
C8
X 18.75 X 13.75
5.51 4.04
8.00 8.00
2.527 2.343
0.390 0.390
0.487 E or W C200 0.303 E or W
X X
27.9 20.5
3 550 2 610
203 203
64 59
9.9 9.9
12.4 7.7
C7
X 14.75 X 12.25 X 9.8
4.33 3.60 2.87
7.00 7.00 7.00
2.299 2.194 2.090
0.366 0.366 0.366
0.419 E or W C180 0.314 E or W 0.210 E
X X X
22 18.2 14.6
2 790 2 320 1 850
178 178 178
58 55 53
9.3 9.3 9.3
10.6 8.0 5.3
C6
X X X
13 10.5 8.2
3.83 3.09 2.40
6.00 6.00 6.00
2.157 2.034 1.920
0.343 0.343 0.343
0.437 0.314 0.200
E E E
C150
X X X
19.3 15.6 12.2
2 470 1 990 1 550
152 152 152
54 51 48
8.7 8.7 8.7
11.1 8.0 5.1
C5
X X
9 6.7
2.64 1.97
5.00 5.00
1.885 1.750
0.320 0.320
0.325 0.190
E E
C130
X X
13 10.4
1 700 1 270
127 127
47 44
8.1 8.1
8.3 4.8
C4
X X X
7.25 5.4 6.25
2.13 1.59 1.84
4.00 4.00 4.00
1.721 1.584 1.647
0.296 0.296 0.296
0.321 0.184 0.247
E E E
C100
X X X
10.8 8
1 370 1 030 1 187
102 102 102
43 40 42
7.5 7.5 7.5
8.2 4.7 6.3
C3
X X
6 5
1.76 1.47
3.00 3.00
1.596 1.498
0.273 0.273
0.356 0.258
E E
C75
X X
8.9 7.4
1 130 948
76 76
40 37
6.9 6.9
9.0 6.6
If a size is not listed, please contact for quoting. All sizes that are extrudable must fit into a 14" circle.
All non-extrudable sizes which can be produced by a combination extruding a tee and welding two tees together to produce an I-Beam.
PHONE: 800-949-4151 FAX: 724-847-7127
EMAIL: [email protected]
American Extruded Products
www.americanextrudedproducts.com
AMEREX
STANDARD STRUCTURALS 304 & 316 STAINLESS
R .375 (.313) .250
SPECIFICATIONS: ASTM A-276, AMS-QQ-S-763 (for Extrusion only) ASTM A-479, DUPONT SW 300M
TYP. STAINLESS STEEL FILLET
R .125 (.090) .060
"C" CHANNELS "E" = EXTRUDED
"W" = WELDED (two extruded angles are welded together)
Designation
Designation
Flange
(Nominal Depth in
Area A,
Depth d,
inches and
in.2
in.
Width bf, in.
Weight in
Web
Thickness tf, in.
Pounds per Linear Foot)
Thickness tf, in.A
Depth in Milli-
Area A,
Depth d,
-OR-
metres and
mm2
mm
"W"
Mass in Kilo-
"E"
Width bf, mm
"B"
"C"
"D"
14.7 13.2 11.8 10.3 9.12
12.00 12.00 12.00 12.00 12.00
4.135 4.010 3.890 3.765 3.670
0.700 0.700 0.700 0.700 0.700
0.835 0.710 0.590 0.465 0.370
MC10 X X X X X
41.1 33.6 28.5 25 22
12.1 9.87 8.37 7.35 6.45
10.00 10.00 10.00 10.00 10.00
4.321 4.100 3.950 3.405 3.315
0.575 0.575 0.575 0.575 0.575
0.796 0.575 0.425 0.380 0.290
MC9
X X
25.4 23.9
7.47 7.02
9.00 9.00
3.500 3.450
MC8
X X X X
22.8 21.4 20 18.7
6.70 6.28 5.88 5.50
8.00 8.00 8.00 8.00
MC7
X X
22.7 19.1
6.67 5.61
MC6
X X X X X
18 15.3 16.3 15.1 12
5.29 4.50 4.79 4.44 3.53
MC310 X X X X X
Thickness tf,
mmA
mm
Metre)
W W W W W
Web Thickness tf,
A
grams per
"A"
50 45 40 35 31
ll sizes that are extrudable must fit into a 14" circle.
Flange
(Nominal
A
MC12 X X X X X
If a size is not listed, please contact for quoting.
TYP. STAINLESS STEEL CORNER
"A"
"B"
"C"
"D"
74 67 60 52 46
9 8 7 6 5
480 502 610 620 890
305 305 305 305 305
105 102 98 96 93
17.8 17.8 17.8 17.8 17.8
21.2 18.0 15.0 11.8 9.4
X X X X X
61.2 50 42.4 37 33
7 6 5 4 4
810 370 400 740 160
254 254 254 254 254
110 104 100 86 84
14.6 14.6 14.6 14.6 14.6
20.2 14.6 10.8 9.7 7.4
0.550 0.550
0.450 E or W MC230 X 0.400 E or W X
37.8 35.6
4 820 4 530
229 229
88 87
14.0 14.0
11.4 10.2
3.502 3.450 3.025 2.978
0.525 0.525 0.500 0.500
0.427 0.375 0.400 0.353
X X X X
33.9 31.8 29.8 27.8
4 4 3 3
320 050 790 550
203 203 203 203
88 87 76 75
13.3 13.3 12.7 12.7
10.8 9.5 10.2 9.0
7.00 7.00
3.603 3.452
0.500 0.500
0.503 E or W MC180 X 0.352 E or W X
33.8 28.4
4 300 3 620
178 178
91 87
12.7 12.7
12.8 8.9
6.00 6.00 6.00 6.00 6.00
3.504 3.500 3.000 2.941 2.497
0.475 0.385 0.475 0.475 0.375
0.379 0.340 0.375 0.316 0.310
26.8 22.8 24.3 22.5 17.9
3 2 3 2 2
152 152 152 152 152
88 88 76 74 63
12.1 9.8 12.1 12.1 9.5
9.6 8.6 9.5 8.0 7.9
E or W MC250 E or W E or W E or W E or W
E or W MC200 E or W E or W E or W
E E E E E
MC150 X X X X X
All non-extrudable sizes which can be produced by a combination extruding a tee and welding two tees together to produce an I-Beam.
410 900 090 860 280
PHONE: 800-949-4151 FAX: 724-847-7127
EMAIL: [email protected]
American Extruded Products
www.americanextrudedproducts.com
AMEREX
R .125 (.090) .060
STANDARD STRUCTURALS 304 & 316 STAINLESS
TYP. STAINLESS STEEL CORNER
R .375 (.313) .250
SPECIFICATIONS: ASTM A-276, AMS-QQ-S-763 ASTM A-479, DUPONT SW 300M
TYP. STAINLESS STEEL FILLET
ANGLES Size and Thickness, in. "A"
"B"
"C"
Weight per Foot, lb.
Size and Thickness, mm.
Area, in.2 "A"
"B"
"C"
Mass per Metre, kg
Area, mm2
L8 L8
x x
8 x 3/4 8 x 1/2
39.0 26.4
11.45 7.77
L203 x L203 x
203 x 19.1 203 x 12.7
58.0 39.3
7 390 5 010
L6
x
6 x 3/8
14.9
4.38
L152 x
152 x
9.5
22.2
2 821
L6
x
5 x 1/2
17.9
5.27
L152 x
127 x 12.7
26.7
3 395
L6 L6 L6
x x x
4 x 1/2 4 x 3/8 4 x 1/4
16.1 12.3 9.2
4.77 3.63 2.46
L152 x L152 x L152 x
102 x 12.7 102 x 9.5 102 x 6.35
24.0 18.3 13.7
3 072 2 337 1 581
L6
x 3 1/2 x 3/8
11.6
3.44
L152 x
89 x
9.5
17.3
2 216
L6
x
3 x 3/8
11.1
3.25
L152 x
76 x
9.5
16.6
2 095
L6
x
2 x 1/4
6.7
1.95
L152 x
51 x
6.4
9.9
1 258
L5 L5 L5 L5 L5 L5 L5
x x x x x x x
5 5 5 5 5 5 5
27.2 23.6 20.0 16.2 14.3 12.3 10.3
7.98 6.94 5.86 4.75 4.18 3.61 3.03
L127 L127 L127 L127 L127 L127 L127
x x x x x x x
22.2 19.0 15.9 12.7 11.1 9.5 7.9
40.5 35.1 29.8 24.1 21.3 18.3 15.3
5 4 3 3 2 2 1
L5
x 3 1/2 x 3/8
10.4
3.06
L127 x
90 x
9.5
15.5
1 974
L5 L5
x x
3 x 3/8 3 x 1/4
9.8 6.6
2.88 1.95
L127 x L127 x
76 x 76 x
9.5 6.4
14.6 9.9
1 853 1 258
L4 L4 L4 L4 L4 L4 L4
x x x x x x x
4 4 4 4 4 4 4
x x x x x x x
3/4 5/8 1/2 7/16 3/8 5/16 1/4
18.5 15.7 12.8 11.3 9.8 8.2 6.6
5.44 4.61 3.75 3.31 2.86 2.40 1.94
L102 L102 L102 L102 L102 L102 L102
x x x x x x x
102 102 102 102 102 102 102
19.0 15.9 12.7 11.1 9.5 7.9 6.4
27.5 23.4 19.0 16.8 14.6 12.2 9.8
3 2 2 2 1 1 1
510 970 420 140 850 550 250
L4 L4 L4 L4
x x x x
3 1/2 3 1/2 3 1/2 3 1/2
x x x x
1/2 3/8 5/16 1/4
11.9 9.1 7.7 6.2
3.50 2.67 2.25 1.81
L102 L102 L102 L102
x x x x
89 89 89 89
x 12.7 x 9.5 x 7.9 x 6.4
17.6 13.5 11.4 9.2
2 1 1 1
260 720 450 170
L4 L4 L4
x x x
13.6 11.1 8.5
3.98 3.25 2.48
L102 x L102 x L102 x
76 x 15.9 76 x 12.7 76 x 9.5
20.2 16.4 12.6
2 570 2 100 1 600
x x x x x x x
7/8 3/4 5/8 1/2 7/16 3/8 5/16
3 x 5/8 3 x 1/2 3 x 3/8
If a size is not listed, please contact for quoting.
x x x x x x x
127 127 127 127 127 127 127
All sizes that are extrudable must fit into a 14" circle.
x x x x x x x
150 480 780 070 700 330 960
If required, tapered leg can be produced.
PHONE: 800-949-4151 FAX: 724-847-7127
EMAIL: [email protected]
American Extruded Products
www.americanextrudedproducts.com
AMEREX
R .125 (.090) .060
STANDARD STRUCTURALS 304 & 316 STAINLESS
TYP. STAINLESS STEEL CORNER
R .375 (.313) .250
SPECIFICATIONS: ASTM A-276, AMS-QQ-S-763 ASTM A-479, DUPONT SW 300M
TYP. STAINLESS STEEL FILLET
ANGLES Size and Thickness, in. "A"
"B"
"C"
L4 L4
x x
3 x 5/16 3 x 1/4
L3 1/2 L3 1/2 L3 1/2 L3 1/2
x x x x
3 1/2 3 1/2 3 1/2 3 1/2
x x x x
L3 1/2 L3 1/2 L3 1/2 L3 1/2 L3 1/2
x x x x x
3 3 3 3 3
L3 1/2 L3 1/2 L3 1/2 L3 1/2
x x x x
L3 L3 L3 L3 L3
Weight per Foot, lb.
Size and Thickness, mm.
Area, in.2 "A"
"B"
"C"
7.2 5.8
2.09 1.69
L102 x L102 x
76 x 76 x
1/2 3/8 5/16 1/4
11.1 8.5 7.2 5.8
3.25 2.48 2.09 1.69
L89 L89 L89 L89
x x x x
x x x x x
1/2 7/16 3/8 5/16 1/4
10.2 9.1 7.9 6.6 5.4
3.00 2.65 2.30 1.93 1.56
L89 L89 L89 L89 L89
2 1/2 2 1/2 2 1/2 2 1/2
x x x x
1/2 3/8 5/16 1/4
9.4 7.2 6.1 4.9
2.75 2.11 1.78 1.44
x x x x x
3 3 3 3 3
x x x x x
1/2 7/16 3/8 5/16 1/4
9.4 8.3 7.2 6.1 4.9
L3 L3 L3 L3 L3 L3
x x x x x x
2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2
x x x x x x
1/2 7/16 3/8 5/16 1/4 3/16
L3 L3 L3 L3 L3
x x x x x
2 2 2 2 2
x x x x x
1/2 3/8 5/16 1/4 3/16
L3 L2 1/2 L2 1/2 L2 1/2 L2 1/2
Mass per Metre, kg
Area, mm2
7.9 6.4
10.7 8.6
1 350 1 090
89 89 89 89
x 12.7 x 9.5 x 7.9 x 6.4
16.5 12.6 10.7 8.6
2 1 1 1
100 600 350 090
x x x x x
76 76 76 76 76
x 12.7 x 11.1 x 9.5 x 7.9 x 6.4
15.1 13.5 11.7 9.8 8.0
1 1 1 1 1
940 710 480 250 010
L89 L89 L89 L89
x x x x
64 64 64 64
x x x x
12.7 9.5 7.9 6.4
13.9 10.7 9.0 7.3
1 770 1 360 1 150 929
2.75 2.43 2.11 1.78 1.44
L76 L76 L76 L76 L76
x x x x x
76 76 76 76 76
x 12.7 x 11.1 x 9.5 x 7.9 x 6.4
14.0 12.4 10.7 9.1 7.3
1 1 1 1
770 570 360 150 929
8.5 7.6 6.6 5.6 4.5 3.4
2.50 2.21 1.92 1.62 1.31 1.00
L76 L76 L76 L76 L76 L76
x x x x x x
64 64 64 64 64 64
x 12.7 x 11.1 x 9.5 x 7.9 x 6.4 x 4.8
12.6 11.3 9.8 8.3 6.7 5.1
1 1 1 1
610 430 240 050 845 643
7.7 5.9 5.0 4.1 3.1
2.25 1.73 1.46 1.19 0.91
L76 L76 L76 L76 L76
x x x x x
51 51 51 51 51
x 12.7 x 9.5 x 7.9 x 6.4 x 4.8
11.5 8.8 7.4 6.1 4.6
1 450 1 120 942 768 582
x 1 1/2 x 1/4
3.6
1.08
L76
38
6.4
5.4
694
x x x x
7.7 5.9 5.0 4.1
2.25 1.73 1.46 1.19
L64 L64 L64 L64
12.7 9.5 7.9 6.4
11.4 8.7 7.4 6.1
1 450 1 120 942 768
2 1/2 2 1/2 2 1/2 2 1/2
x x x x
1/2 3/8 5/16 1/4
If a size is not listed, please contact for quoting.
x x x x
All sizes that are extrudable must fit into a 14" circle.
64 64 64 64
x x x x
If required, tapered leg can be produced.
PHONE: 800-949-4151 FAX: 724-847-7127
EMAIL: [email protected]
American Extruded Products
www.americanextrudedproducts.com
AMEREX
R .125 (.090) .060
STANDARD STRUCTURALS 304 & 316 STAINLESS
TYP. STAINLESS STEEL CORNER
R .375 (.313) .250
SPECIFICATIONS: ASTM A-276, AMS-QQ-S-763 ASTM A-479, DUPONT SW 300M
TYP. STAINLESS STEEL FILLET
ANGLES Size and Thickness, in. "A"
"B"
"C"
Weight per Foot, lb.
Size and Thickness, mm.
Area, in.2 "A"
"B"
"C"
Mass per Metre, kg
Area, mm2
L2 1/2 x 2 1/2 x 3/16
3.1
0.90
L64
x
64 x
4.8
4.6
581
L2 1/2 L2 1/2 L2 1/2 L2 1/2
5.3 4.5 3.6 2.8
1.55 1.31 1.06 0.81
L64 L64 L64 L64
x x x x
51 51 51 51
9.5 7.9 6.4 4.8
7.9 6.7 5.4 4.2
1 000 845 684 522
L2 1/2 x 1 3/4 x 3/8
4.9
1.47
L64
44
9.5
7.3
946
L2 1/2 x 1 1/2 x 1/4 L2 1/2 x 1 1/2 x 3/16
3.2 2.4
0.94 0.72
L64 L64
x x
38 x 38 x
6.4 4.8
4.8 3.6
605 461
L2 L2 L2 L2
x x x x
3/8 5/16 1/4 3/16
4.7 3.9 3.2 2.4
1.36 1.15 0.94 0.72
L51 L51 L51 L51
x x x x
51 51 51 51
x x x x
9.5 7.9 6.4 4.8
7.0 5.8 4.7 3.6
877 742 605 461
L2 L2
x 1 1/2 x 1/4 x 1 1/2 x 3/16
2.8 2.1
0.82 0.63
L51 L51
x x
38 x 38 x
6.4 4.8
4.2 3.1
525 401
L1 3/4 x 1 3/4 x 1/4 L1 3/4 x 1 3/4 x 3/16
2.8 2.1
0.81 0.62
L44 L44
x x
44 x 44 x
6.4 4.8
4.1 3.1
525 401
L1 1/2 x 1 1/2 x 1/4 L1 1/2 x 1 1/2 x 3/16 L1 1/2 x 1 1/2 x 5/32
2.3 1.8 1.5
0.69 0.53 0.45
L38 L38 L38
x x x
38 x 38 x 38 x
6.4 4.8 4.0
3.4 2.7 2.2
444 340 286
L1 1/4 x 1 1/4 x 1/4 L1 1/4 x 1 1/4 x 3/16
1.9 1.5
0.57 0.44
L32 L32
x x
32 x 32 x
6.4 4.8
2.8 2.2
363 280
L1 1/4 x 1 3/4 x 3/16
1.7
0.54
L32
x
44 x
4.8
2.6
349
L1
x
2 x 1/4
2.3
0.70
L25
x
51 x
6.4
3.5
452
L1 L1
x x
1 x 1/4 1 x 3/16
1.5 1.2
0.44 0.34
L25 L25
x x
25 x 25 x
6.4 4.8
2.2 1.8
283 219
x x x x
2 2 2 2
2 2 2 2
x x x x
x x x x
3/8 5/16 1/4 3/16
If a size is not listed, please contact for quoting.
All sizes that are extrudable must fit into a 14" circle.
x x x x
If required, tapered leg can be produced.
PHONE: 800-949-4151 FAX: 724-847-7127
EMAIL: [email protected]
American Extruded Products
www.americanextrudedproducts.com
AMEREX STANDARD STRUCTURALS 304 & 316 STAINLESS
R .375 (.313) .250 TYP. STAINLESS STEEL FILLET
SPECIFICATIONS: ASTM A-276, AMS-QQ-S-763 ASTM A-479, DUPONT SW 300M
R .125 (.090) .060
TEES SIZE (BY DIMENSION) (IN.) A B CxD 1" 1.625" 1.5" 1.5" 1.625" 2" 2" 2.5" 3" 3" 3" 4" 4" 4" 4" 5" 5" 5" 5" 5" 5" 5" 6" 6" 6" 6" 6" 6" 6" 6" 6" 7" 7" 7" 7" 7" 7" 7" 7" 7" 7" 7" 7" 8" 8" 8"
If a size is not listed, please contact for quoting.
1" 1.375" 1.5" 1.5" 2.625" 2" 3" 2.5" 2.5" 3" 3" 3" 3" 4" 4" 4" 4" 4" 5" 5" 5" 5" 4" 4" 4" 5" 5" 5" 6" 6" 6" 4" 4" 4" 5" 5" 5" 6" 6" 6" 7" 7" 7" 6" 6" 6"
.250" .250" .188" .250" .375" .250" .250" .250" .375" .250" .375" .188" .250" .250" .375" .250" .375" .500" .250" .375" .500" .750" .375" .500" .750" .375" .500" .750" .375" .500" .750" .375" .500" .750" .375" .500" .750" .375" .500" .750" .375" .500" .750" .375" .500" .750"
WEIGHT PER FOOT, lb.
1.6 2.5 1.9 2.5 5.0 3.3 4.2 4.2 6.6 5.0 7.3 4.5 5.9 6.7 9.9 7.6 11.2 14.6 8.4 12.4 16.3 23.7 12.4 16.3 23.7 13.7 18.0 26.3 15.0 19.7 28.8 13.7 18.0 26.3 15.0 19.7 28.8 16.3 21.4 31.4 17.5 23.1 33.9 17.5 23.1 33.9
TYP. STAINLESS STEEL CORNER
SIZE (BY DIMENSION) (MM) A B CxD 25.4 41.3 38.1 38.1 41.3 50.8 50.8 63.5 76.2 76.2 76.2 101.6 101.6 101.6 101.6 127 127 127 127 127 127 127 152.4 152.4 152.4 152.4 152.4 152.4 152.4 152.4 152.4 177.8 177.8 177.8 177.8 177.8 177.8 177.8 177.8 177.8 177.8 177.8 177.8 203.2 203.2 203.2
All sizes that are extrudable must fit into a 14" circle.
25.4 34.9 38.1 38.1 66.7 50.8 76.2 63.5 63.5 76.2 76.2 76.2 76.2 101.6 101.6 101.6 101.6 101.6 127 127 127 127 101.6 101.6 101.6 127 127 127 152.4 152.4 152.4 101.6 101.6 101.6 127 127 127 152.4 152.4 152.4 177.8 177.8 177.8 152.4 152.4 152.4
6.4 6.4 4.8 6.4 9.5 6.4 6.4 6.4 9.5 6.4 9.5 4.8 6.4 6.4 9.5 6.4 9.5 12.7 6.4 9.5 12.7 19.1 9.5 12.7 19.1 9.5 12.7 19.1 9.5 12.7 19.1 9.5 12.7 19.1 9.5 12.7 19.1 9.5 12.7 19.1 9.5 12.7 19.1 9.5 12.7 19.1
MASS PER METRE, kg. 2.4 3.7 2.8 3.7 7.4 4.9 6.2 6.2 9.8 7.5 10.9 6.7 8.7 10.0 14.7 11.3 16.6 21.7 12.5 18.5 24.2 35.3 18.5 24.2 35.3 20.4 26.8 39.1 22.3 29.3 42.9 20.4 26.8 39.1 22.3 29.3 42.9 24.2 31.8 46.7 26.1 34.4 50.5 26.1 34.4 50.5
Related Documents
Structural Steel Dimenssions
June 2020 5
Structural Steel Industry
April 2020 10
Structural Steel Industry
April 2020 5
Structural Steel (coatings).pdf
May 2020 6
Nr320107-structural-engineering-ii(steel)
October 2019 20