Staadpro Course.pdf

STAADpro Courses by Er. Karim M Pathan, Aurangabad

1. Basic Course ( for Building only ) (1st to 5th Feb 2017) Course Duration: 10 Hrs ( 2 hr for 5 days ) Course Contents: 1.

Modeling of simple 3-D frame specifying properties, supports, application of static loadings viewing the results graphically as well in tabular format. Specifying Horizontal as well Vertical loads..

2.

Modeling of simple 3-D frame specifying Groups for Beams and Columns, specifying properties, supports, application of static loadings viewing the results graphically as well in tabular format. Viewing the results for different groups separately as well preparing Analysis report..

3.

Modeling of simple 3-D frame specifying Groups for Beams and Columns, specifying properties, supports, application of Seismic Loading as per IS 1893 along with static loadings and different loading combinations, viewing the results graphically as well in tabular format, Viewing the results for different groups separately as well preparing Analysis report…

4.

Frame modeling of unsymmetrical building with STAAD editor environment specifying the required properties, analyzing and viewing the results for Static as well Seismic loading and combinations.. up to preparation of Analysis Report….

5.

Special Geometry Generation commands like, Move/Rotate/Mirror/Circular Repeat/Create infill plates/ Split Beam etc.. etc. Special commands like, Beta angle, offset, member tension, member compression, specifying releases etc.. and Introduction to RCC design by using STAADpro with IS-456-2000

2. Professional Course (9th to 12th Feb 2017) – Basic knowledge of STAADpro required Duration: 24 Hrs ( 6 hr a day for 4 days ) Course Contents: In this course in addition to above mentioned elements of the Basic course in building following Structures with details mentioned shall be covered. 1.

Analysis and Design of Framed Steel Structure along with Plane and Space Truss ( 6 hr )

2.

Analysis of Short and Long span Bridges : ( 12 hr ) ( I ) Introduction to Working Stress Method. ( II ) Introduction to IRC Loads and Recommendations regarding design of Bridges. ( III ) Modeling of RCC Bridge with Two / Three Girder Geometry ( Iv ) Analysis of the Bridge model for Moving loads as per IRC ( Class-A etc ) ( v ) Introduction to the modeling of Steel Truss Bridge / N-Girder Bridge / Foot over Bridge at Railway Stations.

3.

Analysis of Water Tanks ( 6 hr ) ( I ) Introduction to Working Stress Method – Related to water Tank. ( II ) Introduction to different geometries and I.S.1893 Recommendations regarding the Earthquake loading, its direction and combinations. ( III ) Modeling of RCC Tanks with different Geometries ( Square, Circular, Intze etc. ) ( Iv ) Analysis and design Example of an RCC Tank

Eligibility of participants : B.E. ( Civil ), M.E. ( Civil / Structures), and B.E. final year students. Course fees

Contact :

1. Basic Course ( Building only ) : 2. Professional course : 3. Both courses : Shaikh Imran : 8855866787, Azeem Pathan : 9767786145

Rs. 8500/- each Rs. 16000 /- each Rs. 21000/- each