Smartpaks 240 Volt To 24 Volt Interface Boards Brochure

Smart Pak 240 VAC to 24V Interface Board

ife L g n i k Ma

le b a t r o Comf

Features

The Smart Pak(TM) has been designed where 240VAC equipment must be controlled by a 24V thermostat. This simple to install interface isolates low and high voltages through relays therefore ensuring that there is no voltage leakage between the equipment and controller.

• LED indication of relay Status • Available in a 3, 4 or 5 relay version • Quality “non strip” Terminals • 15 Amp fan relay* • 10 Amp equipment relays* • 240VAC and 24VAC fused • Safety covers fitted to fuses • Secure 4 point mounting • Tough Non Twist Base • Heat Pump select switch • Proudly Manufactured in Australia • Full drawings provided • 1 Year Warranty

The Smart Pak has been fitted with LED indicators to provide visual indication of each relays status. This is a valuable aid during system commissioning or when fault finding a previous instillation. The highest quality components and the latest design and manufacturing techniques have been employed in the construction of the Smart Pak. The quality of this construction is reflected in the unconditional two year return to factory warranty offered by Smart Temp. The Smart Pak is fitted with a selector switch that gives the Smart Pak the unique ability to control a Heat Pump system using a standard Heat/Cool thermostat. A useful feature when a installation, for what ever reason dictates the use of a normally incompatible thermostat. A specially constructed base has been used to provide secure mounting of the Smart Pak. This base has a reinforced mounting point in each corner which is designed to take the stress of mounting the Smart Pak using power tools and tech screws without damaging the Smart Pak PCB or other components. The Smart Temp Smart Pak has been designed with the electrical installer in mind. It has been built to be simple to understand, simple to install and very reliable in performance. Further, it has been designed and built in Australia to comply with Australian rules and requirements.

Smart Pak 03

General Description

Specifications Size Weight Fused Mounting Relays Selectors

147x 90 x 45mm 350g 240VAC - 15 Amp 24VAC - 500mA 4 x 7mm reinforced holes Fan - 15Amp contact rating Equip - 10 Amp contact rating Heat pump Emulation mode Full on mode (Smart Pak 3 only)

Reversing Valve Comp

Smartpak05N - 5 Relay SW2 On for Heat Pump with Heat Cool T’stat

SMT-203

Authorised Distributor

Another Australian Made product from

Smart Temp Australia Pty Ltd Knox Gateway Business Park Unit 20 /1488 Ferntree Gully Rd Knoxfield Vic 3180 Phone:(03) 9763 0094 Fax (03) 9763 0098 www.thermostat.com.au www.smarttemp.com.au Due to continual product improvement, specifications are subjet to change without notice.