5 in 3 m)
TM
Technical Specifications
33.5 ft (10.2 m) Monopole Tower
Ø 0.51 in (1.30 cm) 8 PLACES
1
7.48 in (19.00 cm) BOLT Tower: CIRCLE Tower Weight:
Freestanding Tapered Tubular Steel / Galvanized Finish 550 lb (249.5 kg)
6.17 in (15.67 cm) monopole outer diameter
(22.5°)
Top of Tower Loads at 146 mph (65.3 m/s) wind speed 630 lb (2802 N)* Thrust Force: Peak Bending Moment: 1130 ft-lb (top of tower) (1532 N-m)* Downward Axial Force: 230 lb (1023 N)* 3.94 in (10.01 cm) *Loads do not include safety factor. SWWP recommends minimum Øsafety factor of Ø1.5. 0.51 in (1.30 cm) YAW PLATE I.D.
Ø12 ft 1.2 in
8 PLACES
7.48 in (19.00 cm) BOLT CIRCLE
m) cm) 0.5 in(3.723 (1.27 SWEPT THICKNESS Ø12 ft 1.2 in (3.723 m) SWEPT
7.48 in (19.00 cm) BOLT CIRCLE
32.5 in (0.83 m)
Ø12 ft 1.2 in (3.723 m) SWEPT
Ø 9.33 in (23.70 cm) YAW PLATE O.D.
Ø 0.51 in (1.30 cm) 8 PLACES
(22.5°)
Ø 0.51 in (1.30 cm) 8 PLACES (22.5°) 32.5 in (0.83 m)
7.48 in (19.00 cm) BOLT CIRCLE
0.5 in (1.27 cm) THICKNESS
15.6 in (0.40 m)
32.5 in SHAFT m) 15.6(0.83 in
UT LONG LEG AGAINST SHAFT
33.0 in (0.84 m)
0.19 in (0.48 cm) 0.43 in x 0.18 in 30˚ (1.1 cm X 0.46 cm)
SHAFT
0.13 in (0.33 cm)
8.56 BASE PLATE (21.74 cm) SHAFT 9.81 in COLLAR (24.92 cm)
PLATE Ø 1.25 in X 42 in BASE X 6MATERIAL in S70 MIN. BASE PLATE YIELD STRENGTH 36KSI S70 MATERIAL (3.175 cm X 106.68 cm MIN. X 36KSI 15.24 cm) YIELD STRENGTH HOOK ANCHOR BOLT 1.25 in (3.175 cm) Tower: THICKNESS QUANTITY: 81.25 in (3.175 cm)
B
Ø17.00 in (43.2 cm)
0.13 in (0.33 0.13cm) in
(13.77 5.42 in cm) (13.77 cm) 8.56
Ø 0.94 in (2.39 cm)
THRU HOLE 4 PLACES Ø 0.94 in (2.39 cm)
R0.98(21.74 in cm) THRU HOLE 4 PLACES 8.56(2.49 cm)
(0.33 cm)
11.06 11.06 (28.09cm) cm) (28.09
TYP 0 45.00˚
1.25 in X 42 in X 6 in ØØ 1.25 in X 42 in X 6 in (3.175 cm X 106.68 cm X 15.24 cm) 5.42 incm (3.175 cm X 106.68 X 15.24 cm) HOOK ANCHOR BOLT (13.77 cm) 0.13 inANCHOR HOOK QUANTITY: 8 BOLT (0.33 cm) 8 8.56 QUANTITY:
1.13 in (2.87 cm) Ø 0.94 in (2.39 cm) THRU HOLE 4 PLACES
(21.74 cm) 9.81 in (24.92 cm)
R0.98 in (2.49 cm) HINGE PLATE HINGE PLATE
2.68 in (6.81 cm)
11.06 (28.09 cm)
HINGE 22.13 in (56.21 cm)
2.68 in (6.81 cm)
PLATE
Ø 1.508-REQ'D, in X 3.50SPACED in Ø 1.25 in X 42 in X 6 in (3.8 cmASX SHOWN 8.9 cm) SLOT (3.175 cm X 106.68 cm X 15.24 cm) 8-REQ'D, SPACED 2.68 in (6.81 Ø17.00 in (43.2HOOK cm) ANCHOR BOLT AS SHOWN BOLT CIRCLE
cm)
QUANTITY: 8
SHAFT AT TOP OF BASE PLATE
4.57 in (11.6 cm)
2.68 in (6.81 cm)
18 ft 1 in (5.52 m)
HINGE PLATE in HINGE R2.88 PLATE in (7.32 cm) 2 PLACES (11.6 cm) 2.68 in (6.81 cm) B 20.50 in 9.13 in 14.49 Ø 10.85 in (27.6 cm) R2.88 in (7.32 cm) (52.1 cm) (23.2 cm)(36.82 cm) PLACES SHAFT AT TOP OF BASE PLATE 4.57 in 4.57 in (11.6 cm) (11.6 cm) B 9.13 in 14.49 20.50 in
2.68 in (6.81 cm)
(23.2 cm)(36.8 cm) (52.1 cm) 4.57 in (11.6 cm)
2
2.68 in (6.81 cm)
Ø17.00 in (43.2 cm) BOLT CIRCLE R5.91 in (15 cm) 2 PLACES
4.57 in (11.6 cm) in in 14.49 20.50 in B 4.57 9.13 (11.6 cm)cm)(36.8 cm) (52.1 cm) (23.2 9.13 in 14.49 20.50 in 4.57B in (11.6 cm) (23.2 cm)(36.8 cm) (52.1 cm)
SHAFT AT TOP OF BASE PLATE
Ø 1.50 in X 3.50 in (3.8 cm X 8.9 cm) SLOT 8-REQ'D, SPACED AS SHOWN
1801 W. Route 66 • Flagstaff, AZ 86001 R5.91 in Tel 928.779.9463 • Fax 928.779.1485 (15 cm) 2 PLACES Ø 10.85 in (27.6 cm) www.skystreamenergy.com
18 ft 1 in (5.52 m)
HINGE PLATE
2. Tower Base
Southwest Windpower BOLT CIRCLE
18 ft 1 in
33 ft 6m)in18 ft 1 in (5.52 (10.2 m) (5.52 m)
2.68 in (6.81 cm)
Ø17.00 in (43.2 cm) R5.91 in BASE PLATE S70 MATERIAL MIN.BOLT CIRCLE (15 cm) 2 PLACES Ø 10.85 in (27.6 cm)4.57 YIELD STRENGTH 36KSI
B
33 ft 6 in
33 ft 6 in(10.2 m) (10.2 m)
MT
B
R5.91 in (15 cm) 2 PLACES
33 ft 6 in (10.2 m)
(21.74 cm) in X 0.18 in R0.98 in (2.49 cm) 0.31 9.81 in 9.81 incm) (0.79 cm X 0.46R0.98 cm) in (2.49 cm) (24.92 (24.92 cm)
THICKNESS
1.25 in (3.175 cm) THICKNESS
Ø 1.50 in X 3.50 in (3.8 cm X 8.9 cm) SLOT 8-REQ'D, SPACED AS SHOWN
Ø 0.94 in (2.39 cm) 1.13 in (2.87 cm) THRU 4 PLACES 5.42HOLE in 1.13 in (2.87 cm)
10 gauge thickness 0.1345 in (3.416 mm)
22.13inin (56.21 (56.21 cm) 22.13 cm)
22.13 in (56.21 cm)
Ø 1.50 in X 3.50 in B (3.8 cm X 8.9 cm) SLOT
0 TYP˚ 45.00
0 45.00˚
(0.48 cm) 30˚
BASE PLATE
Prop Tip to Center of 31 in (79 cm) BASE PLATE S70Minimum MATERIAL MIN. Tip Clearance: YIELD STRENGTH 36KSI 27 in (69 cm) Tower 1.25Max in (3.175 cm) Diameter at Tip: THICKNESS 8 in (20 cm)
1.13 in (2.87 cm)
11.06 (28.09 cm) 0.19 in
0.43 in x 0.18 in (1.1 cm X 0.46 cm)
Dimensions
MT 0.31 in X 0.18 in (0.79 cm X 0.46 cm) MT TYP
0.19 in (0.48 cm) 0.19 in 0.43 inin x 0.18 in 30 5.42 ˚ cm) (0.48 (1.1 cm X 0.46 cm) 0.43 in x 0.18 in 30˚ (13.77 cm) (1.1 cm X 0.46 cm) BASE PLATE
UT LONG LEG AGAINST SHAFT
0.31inin(23.70 X 0.18 cm) in Ø 9.33 (0.79 cm X 0.46 cm) YAW PLATE O.D.
COLLAR
UT LONG LEG AGAINST SHAFT
BASE PLATE 33.0 in (0.84 m)
0 45.00˚
COLLAR
UT LONG LEG AGAINST SHAFT
Ø 3.94 in (10.01 cm) YAW PLATE I.D.
TYP
SHAFT
0.5 in (1.27 cm) THICKNESS
Ø 9.33 in (23.70 cm) YAW PLATE O.D.
0.31 in X 0.18 in (0.79 cm X 0.46 cm) Top MT
1. Tower
33.0 in (0.84 m)
15.6 in (0.40 m)
(22.5°)
Ø 3.94 (10.01cm) cm) Ø 9.33 in in (23.70 YAW PLATE I.D. YAW PLATE O.D.
0.5 in (1.27 cm) THICKNESS
COLLAR
(0.40 m)
S105 Material min. yield strength 55 ksi
Ø 3.94 in (10.01 cm) YAW PLATE I.D.
HINGE PLATE
Ø 10.85 in (27.6 cm) SHAFT AT TOP OF BASE PLATE
HINGE PLATE
R2.88 in (7.32 cm) R2.88 in (7.32 cm) 2 PLACES 2 PLACES
10.85 in (27.56 cm) monopole outer diameter
Tower 3-CMLT-1093-01 REV B 7-07