Silicone Rubber Heater _ Spec.

Silicone Rubber Heater - Grand Hold | Silicone Rubber Heater | Spec.

Home

About Us

Silicone Rubber Heater

Product Gallery

Downloads

Home > Silicone Rubber Heater > Spec.

Silicone Rubber Heater

Description Spec.

Spec. To ensure accuracy of the customer’s order, specifications will be confirmed after discussions through contacts. Pricing will follow after the design estimate to assist the customer in confirming the project specifications in regard to the following:

Operation Applications Chat Now

1. Purchasing quality and delivery schedule. 2. Specifications (mm) (length, width, diameter, middle slit and position). Slit for fixing screws or middle slit: Slits will be proposed at the design stage. Each slit must keep a 5mm distance to avoid electricity leakage due to electrical wires coming too close. Thus the attachment surface can be increased, and peeling off due to the attachment surface being too small can be avoided. 3. Voltage usage (V). 4. Power (W). Power of heating pad differs from other heaters and is suitable for fixed temperature and humidity preservation application instead of immediate heating for large-size objects. Therefore the power should not be upgraded following concepts like those applied in designing general heaters, instead, sufficient discussion should be held during designing for confirmation of specifications. 5. Temperature to be used. 6. Length of power cable and outlet location.

http://grandhold.com.tw/gh/product-spec-confirm.html[2009/8/6 下午 03:40:19]

Contact Us

Site Map

Silicone Rubber Heater - Grand Hold | Silicone Rubber Heater | Spec.

7. Others. (If simple on/off switch protection wire and back tape etc. are needed.) After discussion, the following specifications will be offered to you for your confirmation. Width (mm)/Side outlet for conduct wire

Necessary information

Length (mm)

Necessary information

Thickness (mm) 1.5mm Voltage

Watt Density (W/c㎡)

Necessary information

Power To be consumption confirmed (Watt)

Standard is 0.6. If different, please request.

Amp(A)

To be confirmed

About 200℃+ . If different, please Temperature of request. Heating Pad Please operate with Temperature Control should reach ~ ℃ Design (ex. Thermostat). Processing advice (or other Please request. attachment about electricity) Power Cable / wire

0.5(sq)

Electric resistance (Ω) +/- Watt +/-10% 10%

Wire length 300(mm) Electric resistance (Ω) (Ω)

Relative Links Home > Silicone Rubber Heater > Description Home > Silicone Rubber Heater > Operation Home > Silicone Rubber Heater > Applications Home > Product Gallery

http://grandhold.com.tw/gh/product-spec-confirm.html[2009/8/6 下午 03:40:19]

Silicone Rubber Heater - Grand Hold | Silicone Rubber Heater | Spec.

Home | About Us | Silicone Rubber Heater | Product Gallery | Downloads | Contact Us | Site Map | 繁體中文 | 日本語 Copyright © 2009 Grand Hold Corporation All Rights Reserved

http://grandhold.com.tw/gh/product-spec-confirm.html[2009/8/6 下午 03:40:19]