xDSL Series Fiber Series
G.SHDSL.bis TDM Family G.SHDSL.bis V35 Modem
2 xDSL Series xDSL Series
SHDTU03b-V35 The CTC SHDTU03b family of G.SHDSL.bis TDM based modem is a telecom product for carriers or SME users. The SHDTU03b-V35 offers a V.35 DTE interface which works over an SHDSL interface. The V.35 interface provides high-speed TDM services by way of a DB25 I/F and adapter cable. The factory selected RS-530 interface will electrically support RS-530, X.21and RS-449 with appropriate adapter cable. The data rate of DB25 I/F may be up to 5.696Mbps within one pair copper wires or 11.392Mbps within two pairs copper wires. The SHDTU03b-V35 can be configured and managed via EOC, or menu-driven VT100 compatible Async. terminal Interface, either locally or remotely.
PDH Series
Features
Specifications
Supports Nx64 V.35, X21, RS530, and RS449 over SHDSL
Ports
Line Rate :
ITU G.991.2 (2004)
WAN Interface
Coding :
trellis coded pulse amplitude modulation
Standard ITU G.991.2 (2004) supports improved reach, speed
(TC-PAM16 and TC-PAM32)
Support :
Annex A ,B , F and G
Fast and cost-effective services of TDM on a single or two wire
Payload rates:
64Kps to 5.696Mbps (N=1 to 89) for 2-wire model. 128Kbps to11.392Mbps (N=1 to 172) for 4-wire model
pair of existing copper loop infrastructure Wetting current to protect copper line (optional) Local management interface with console
Connection :
RJ-45 jack (2-wire or 4-wire)
Impedance :
135 ohms
G.703 Interface(as E1) Payload rates :
Up to 5.696Mbps(for 2-wire model) or Up to 8.192Mbps(for 4-wire model)
Remote line loopback Support :
G.SHDSL.bis Line performance monitoring (data rate and SNR)
V.35/RS-530 or V.36/X.21
IP Networking
and interoperability compared to conventional G.shdsl
Framing :
Raw and per time interval statistics
Tester Series
Data Rate : Operation :
LED DSL Timing
Application
Power, Alarm, Test, SYNC, Error, LBK, TD, RD • Internal • From DTE ( as V.35 and Ethernet)
Performance Monitoring ES, SES, UAS, LOWS, Alarms and Errors • Local Digital Loopback Loopback Tests
Interface Converter Series
• Local Loopback • Remote Line Loopback • Remote Payload Loopback • Far-end Line Loopback • Far-end Payload Loopback • V.54 Loopback (for V.35 interface) • Build-in 2047(211-1) bit BER tester
Management
AC Input: 100~240V DC Input: -36 ~ 72V
Management
Dual power Input:100~ 240VAC, -36 ~ -72VDC
Power Power Consumption Dimensions (D x W x H)mm Weight Temperature Humidity Certification MTBF
< 10W 168 x 195 x 48mm
5.2kg 0~50°C (Operating) ,0~70°C (Storage) 10~90% non-condensing CE, FCC, RoHS 57,000 hours
Ordering Information SHDTU03b-Data-AC
2 wire Data(V35,X.21,RS530,RS449) NTU with 100~240VAC
SHDTU03b-Data -DC
2 wire Data(V35,X.21,RS530,RS449) NTU with -36 ~ -72VDC
SHDTU03b-Data -AD
2 wire Data(V35,X.21,RS530,RS449) NTU with AC+DC power
SHDTU03bA-Data- AC SHDTU03bA-Data - DC SHDTU03bA-Data - AD
4 wire Data(V35,X.21,RS530,RS449) NTU with 100~240VAC 4 wire Data(V35,X.21,RS530,RS449) NTU -36 ~ -72VDC 4 wire Data(V35,X.21,RS530,RS449) NTU AC+DC power
66
xDSL Series
G.SHDSL.bis TDM Family G.SHDSL.bis E1 Interface Modem
SHDTU03b-E1 The CTC SHDTU03b family of G.SHDSL.bis TDM based modem is a telecom product for carriers or SME users. The SHDTU03b-E1 offers an ITU-T G.703 DTE interface which works over an SHDSL interface. The modem supports two different connectors for G.703 E1 application (balanced 120 Ohm RJ45 or unbalanced 75 Ohm dual BNCs) at bit rates from 64kbps to 2.048Mbps. The SHDTU03b-E1 can be configured and managed via EOC, or menu-driven VT100 compatible Async. terminal Interface, either locally or remotelyfor different customer-tailored services. Three types of TDM 2-wire line cards are available on this shelf, 2-channel E1 card, 2-channel V35,X21,RS530 card and 2-channel Ethernet bridge card, each channel provides symmetric line rates from 192kbps to 5.696Mbps.
Features
Specifications
Supports E1 and fractional E1 over SHDSL
Ports
Line Rate :
ITU G.991.2 (2004)
WAN Interface
Coding :
trellis coded pulse amplitude modulation
Standard ITU G.991.2 (2004) supports improved reach, speed
(TC-PAM16 and TC-PAM32)
and interoperability compared to conventional G.shdsl
Support :
Annex A ,B , F and G
Fast and cost-effective services of voice or TDM on a single or
Payload rates:
64Kps to 5.696Mbps (N=1 to 89) for 2-wire model. 128Kbps to11.392Mbps (N=1 to 172) for 4-wire model
two wire pair of existing copper loop infrastructure Wetting current to protect copper line (optional) Local management interface with console
Connection :
RJ-45 jack (2-wire or 4-wire)
Impedance :
135 ohms
G.703 Interface(as E1) Connection :
RJ-45 for balanced 120Ω E1 cable and BNC for unbalanced 75Ω E1 cable
Remote line loopback Line Rate :
2048KHz +/- 50ppm
Framing :
PCM30/PCM30C/PCM31/PCM31C and Unframed
G.SHDSL.bis Line performance monitoring (data rate and SNR)
Data Rate :
64Kbps to 2.048Mbps ( Nx64Kbps , N=1 to 32)
Raw and per time interval statistics
Operation :
Full E1 and Fractional E1
E1 performance monitoring and alarm buffer
LED DSL Timing
Power, Alarm, Test, SYNC, Error, LBK • Internal • From E1 Recovery (as E1)
Application
• From DTE ( as V.35 and Ethernet)
Performance Monitoring ES, SES, UAS, LOWS, Alarms and Errors • Local Digital Loopback Loopback Tests • Local Loopback • Remote Line Loopback • Remote Payload Loopback • Far-end Line Loopback • Far-end Payload Loopback • Build-in 2047(211-1) bit BER tester
Management
• Configuration with keypads and LCD display • Console port (RJ45 , RS232) • Support firmware upgradeable
Power
AC Input: 100~240V DC Input: -36 ~ 72V Dual power Input:100~ 240VAC, -36 ~ -72VDC
Ordering Information SHDTU03b-E1-AC SHDTU03b-E1-DC SHDTU03b-E1-AD SHDTU03bA-E1-AC SHDTU03bA-E1-DC SHDTU03bA-E1-AD
65
2 wire E1 NTU with 100~240VAC 2 wire E1 NTU with -36 ~ -72VDC 2 wire E1 NTU with AC+DC power 4 wire E1 NTU with 100~240VAC 4 wire E1 NTU with -36 ~ -72VDC 4 wire E1 NTU with AC+DC power
Power Consumption Dimensions (D x W x H)mm Weight Temperature Humidity Certification MTBF
< 10W 168 x 195 x 48mm 5.2kg 0~50°C (Operating) ,0~70°C (Storage) 10~90% non-condensing CE, FCC, RoHS 57,000 hours
xDSL Series
G.SHDSL.bis TDM Family G.SHDSL.bis Ethernet Modem
SHDTU03b-ET100 The CTC SHDTU03b family of G.SHDSL.bis TDM based modem is a telecom product for carriers or SME users. The SHDTU03b-ET100 offers a 10/100Base-TX interface which works over an SHDSL interface. The Ethernet interface provides Ethernet over TDM services by way of a HDLC encapsulation and RJ-45 connector. The data rate of Ethernet I/F may be up to 5.696Mbps within one pair copper wires or 11.392Mbps within two pairs copper wires. The SHDTU03b-ET100 can be configured and managed via EOC, or menu-driven VT100 compatible Async. terminal Interface, either locally or remotely.
Features
Specifications
Supports 10Base-T and 100Base-TX over SHDSL
Ports
Line Rate :
ITU G.991.2 (2004)
WAN Interface
Coding :
trellis coded pulse amplitude modulation
Standard ITU G.991.2 (2004) supports improved reach, speed
(TC-PAM16 and TC-PAM32)
and interoperability compared to conventional G.shdsl
Support :
Annex A ,B , F and G
Fast and cost-effective services of data on a single or two wire
Payload rates:
64Kps to 5.696Mbps (N=1 to 89) for 2-wire model. 128Kbps to11.392Mbps (N=1 to 172) for 4-wire model
pair of existing copper loop infrastructure Wetting current to protect copper line (optional)
Connection :
RJ-45 jack (2-wire or 4-wire)
Impedance :
135 ohms
Local management interface with console
LAN Interface
• Single Ethernet Interface
Remote line loopback
(as Ethernet)
• 10/100Mpbs Half/Full Duplex, Auto-sensing, Auto-Crossover
G.SHDSL.bis Line performance monitoring (data rate and SNR) Raw and per time interval statistics
• Up to 1024 MAC address learning, filtering bridge
LED DSL Timing
Power, Alarm, Test, SYNC, Error, LBK, Link/Act, speed, Col • Internal • From DTE ( as V.35 and Ethernet)
Performance Monitoring ES, SES, UAS, LOWS, Alarms and Errors • Configuration with keypads and LCD display Management • Console port (RJ45 , RS232C) • Support firmware upgradeable
Application
Power
AC Input : 100~240V DC Input : -36 ~ 72V Dual power Input :100~ 240VAC, -36 ~ -72VDC
Power Consumption Dimensions (D x W x H)mm Weight Temperature Humidity Certification MTBF
Ordering Information SHDTU03b-ET100-AC SHDTU03b-ET100-DC SHDTU03b-ET100-AD SHDTU03bA-ET100-AC SHDTU03bA-ET100-DC SHDTU03bA-ET100-AD
67
2 wire Ethernet 10/100Base-TX NTU with 100~240VAC 2 wire Ethernet 10/100Base-TX NTU with -36 ~ -72VDC 2 wire Ethernet 10/100Base-TX NTU with AC+DC power 4 wire Ethernet 10/100Base-TX NTU with 100~240VAC 4 wire Ethernet 10/100Base-TX NTU with -36 ~ -72VDC 4 wire Ethernet 10/100Base-TX NTU with AC+DC power
< 10W 168 x 195 x 48mm
5.2kg 0~50°C (Operating) ,0~70°C (Storage) 10~90% non-condensing CE, FCC, RoHS 57,000 hours