Setup
This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA
Overview
Download & View Setup as PDF for free.
More details
- Words: 173
- Pages: 10
PT-200 Programming Software
Presented by: SMT Indian engg
Contents Power Supply Air Supply LAN Setup PATLITE Setup
Power Supply Supply Power:
200VAC ± 10V or 400VAC ± 10V
Frequency:
50/60 Hz ± 5%
Rated Capacity:
2.5 kVA
Power Supply Installation Procedure:
Open the panel on the right side of the machine Pass the cable through the cable clamp and secure it by rotating clockwise Connect the cable with the main power terminal
Connecting pin: Weidmuller H4/20D or H6/20 Connection order: PEL1L2L3 Tightening torque: 0.8~1.6 Nm
Air Supply Supply compressed air to A (in diagram) Air pressure: 0.49~0.78MPa Adjust to: 0.49~0.54MPa using the regulator Air supply: Min. 150L/min (8L/min more for every bulk feeder)
LAN Setup
LAN Setup Connect Ethernet cable to HUB in the machine and with the line computer (PT installed)
PATLITE Setup Insert the plug into the socket on the main machine and fix it with a clasp
Presented by: SMT Indian engg
Contents Power Supply Air Supply LAN Setup PATLITE Setup
Power Supply Supply Power:
200VAC ± 10V or 400VAC ± 10V
Frequency:
50/60 Hz ± 5%
Rated Capacity:
2.5 kVA
Power Supply Installation Procedure:
Open the panel on the right side of the machine Pass the cable through the cable clamp and secure it by rotating clockwise Connect the cable with the main power terminal
Connecting pin: Weidmuller H4/20D or H6/20 Connection order: PEL1L2L3 Tightening torque: 0.8~1.6 Nm
Air Supply Supply compressed air to A (in diagram) Air pressure: 0.49~0.78MPa Adjust to: 0.49~0.54MPa using the regulator Air supply: Min. 150L/min (8L/min more for every bulk feeder)
LAN Setup
LAN Setup Connect Ethernet cable to HUB in the machine and with the line computer (PT installed)
PATLITE Setup Insert the plug into the socket on the main machine and fix it with a clasp
