Servosteel Briefing 3
This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA
Overview
Download & View Servosteel Briefing 3 as PDF for free.
More details
- Words: 1,185
- Pages: 2
Your Next Move… Why not give us a call to discuss your requirements? Alternatively for further information about Servosteel and our services visit our website.
E-mail: [email protected] Web: www.servosteel. co.uk
3 briefing
Tel: 01384 471371
Scale of Charges (at October 2008*) PRODUCT/SERVICE
CHARGE
Internal stock transfers between customers
£15 lump sum each stock transfer
Storage charge for unprocessed parent coil languishing on our shop floor in excess of TWO MONTHS. Charged at Month End
£0.50 per tonne per week thereafter
Handling and Storage of material collected out unprocessed (including part processed coil balances returned to stock).
£7.00 per tonne handling £0.50 per tonne per week storage from date of receipt (No Free Period), minimum £3.00 per tonne charge
Storage of processed material languishing on shop floor in excess of 14 days from date of processing. Charged at Month End
£1.00 per tonne per week or part week thereafter (minimum invoice £20)
Coil to Coil Pickling Coil cut/Line stop by customer request
£240 minimum lump sum charge £2 per tonne per line stop
Slitting Coil cut/Line stop by customer request Coil back to stock/taken off
£220 minimum lump sum charge £2 per tonne per line stop £75 lump sum charge
Decoiling More than four length sizes per coil More than eight length sizes per coil Coil back to stock/taken off Lengths >7000mm <8999mm Lengths >9000mm
£180 minimum lump sum charge £2 per tonne extra £4 per tonne extra £75 lump sum Basic + £3 per tonne(Full order) Basic + £6 per tonne(Full order)
Special Packing/Identification Requirements e.g. Strapping timbers to slit coils /colour coding pack ends
Price to be agreed Prior to processing
Material Samples
£25 lump sum per sample
Physical Stock-take charged at £60 per request. Additional charge of £25 per hour for stock verification in customer’s presence
£60.00 per stock-take £25.00 per hour (min. 2 hours)
Coil inspection on site by stock owner following booked visit—minimum 24 hours prior notice. On spec visits by agreement only.
£20 lump sum per coil
SCS Coil cut/Line stop by customer request Coil Recovery
£240 minimum lump sum charge £2 per tonne line stop Basic + £10 per tonne
*subject to change over time
CONTENTS Introduction Machine Specs Further Information Charges
1 2 4 4
Perhaps we never told you about our other services? Recently it came to our attention that customers using one of our services were unaware of our other offerings. This Briefing is designed to put this right and provide you with an overview of all our key services. You may not be aware that Servosteel is the largest Toll Processor in the UK and is unique in being able to offer a “one stop shop” service for pickling and oiling in coil form together with slitting and decoiling. This facility helps customers to avoid
duplicated material handling if using different Toll Processors to slit or decoil after pickling and oiling. In addition to these services, Servosteel’s newest process, SCS, enables us to clean steel using only brushes and water (very environmentally friendly!) and produce extremely flat material with an extended shelf life without the need to oil it after cleaning. At the same time we can improve the condition of damaged coils.
Machine Specifications Servosteel boasts the widest range of strip mill processing under one roof with 24 hr receipt, processing and despatch. This is linked into your online customer account which you can access using a unique code. It is governed by ISO 9001 and ISO 14001 management systems and will make available to you in real time: 1. Your stock in detail. 2. Status of current orders. 3. Your invoices. 4. Live information about vehicles on site.
The principal items of plant now include: • SCS Cleaning Line Annual capacity—200,000 tonnes • Coil to Coil Pickling Line Annual capacity—240,000 tonnes • Two Wide Decoiling Lines Annual capacity—100,000 tonnes • Two Wide Slitting Lines Annual capacity—120,000 tonnes • One Narrow Slitting Line Annual capacity—35,000 tonnes
Slitting Lines
Our Bronx Slitting Lines are built to the highest specifications, with innovative features and system automation resulting in slitting to the highest quality and accuracy with maximum efficiency and productivity.
Machine Specs Initial Material Sizes Max Width coil: 2000mm Min Width coil: 700mm Max Thickness: 10.0mm Min Thickness: 1.4mm
Max O/D: 2000mm Max Weight: 27 tonnes Processing Capabilities Max Cuts at Min Thickness: 18 Max Cuts at Max Thickness: 6
Finished Material Sizes Width Min: 40.0mm I/D Size 1: 508mm I/D size 2: 610mm Max O/D: 2000mm Weight max: 25 tonnes
Coil Pickling Line Push-pull hydrochloric pickle line, supplied by Delta Brands Inc., using shallow bath technology with an acid resistant granite liner.
Max I/D: 950mm Min I/D: 508mm
Slitter 2
Max I/D: 950mm Min I/D: 508mm
Machine Specs
Max O/D: 2100mm Min O/D: 1400mm
Slitter 1
Max Weight: 29 tonnes
Machine Specs
Finished Material Sizes I/D size 1: 610mm I/D size 2: 762mm O/D max: 1950mm
Initial Material Sizes
Initial Material Sizes
Max Width coil: 1525mm Min Width coil: 750mm Max Thickness: 2.8mm Min Thickness: 0.3mm
Processing Capabilities
Max Cuts at Min Thickness: 24 Max Cuts at Max Thickness: 5
Finished Material Sizes Width Min: 26.1mm I/D Size 1: 508mm I/D size 2: 610mm Max O/D: 2000mm Weight Max: 25 tonnes
Slitter 3 Machine Specs
Initial Material Sizes
Max Width coil: 600mm Min Width coil: 20mm Max Thickness: 2.0mm Min Thickness: 0.3mm Max I/D: 610mm Min I/D: 508mm Max O/D: 1775mm Max Weight: 6 tonnes
Max Width coil: 1525mm Min Width coil: 650mm
Max I/D: 950mm Min I/D: 508mm
Processing Capabilities
Max Thickness: 6.5mm Min Thickness: 2.0mm
Max O/D: 2000mm Max Weight: 27 tonnes
Max Cuts at Max Thickness: 6
Max Cuts at Min Thickness: 12
Finished Material Sizes
SCS is hot rolled black material which has been taken through an environmentally friendly process using engineered abrasive rolls and water to produce a ‘napkin clean’, smooth, rust resistant surface. The process does not use any chemicals, acids or heat, but water only.
Machine Specs
Decoiling Lines
BRONX ‘state of the art’ Cut to Length Lines incorporate the latest control technology ensuring the highest level of consistency and accuracy to meet today’s quality demands.
Decoiler 1 Machine Specs
Initial Material Sizes
Max Width coil: 2000mm Min Width coil: 700mm Max Thickness: 12.0mm Min Thickness: 3.0mm
Initial Material Sizes Min Width: 600mm Max Width: 1830mm
Max I/D: 950mm Min I/D: 508mm
Max Thickness: 4.0mm Min Thickness: 0.9mm
Max O/D: 2100mm Min O/D: 1000mm
Max I/D: 950mm Min I/D: 508mm
Max Weight: 29 tonnes
Max O/D: 2100mm Min O/D: 1000mm
Finished Material Sizes I/D Size: 1610mm I/D Size: 2762mm Max length: 12000mm
Decoiler 2 Machine Specs
Initial Material Sizes
Max Width coil: 2000mm Min Width coil: 700mm
Width Min: 14.0mm I/D Size 1: 406mm I/D Size 2: 508mm Max O/D: 1775mm Weight Max: 2,500kg
Max Weight: 29 tonnes
Finished Material Sizes I/D Size: 1610mm I/D Size: 2762mm Max length: 6000mm
Min Thickness: 1.0mm Max Thickness: 8.0mm Min I/D: 483mm Max I/D: 965mm Min O/D: 1200mm Max O/D: 2000mm Max Weight: 30 tonnes
Finished Material Size I/D Size 1: 508mm I/D Size 2: 600mm Max O/D: 2000mm
SCS Line
E-mail: [email protected] Web: www.servosteel. co.uk
3 briefing
Tel: 01384 471371
Scale of Charges (at October 2008*) PRODUCT/SERVICE
CHARGE
Internal stock transfers between customers
£15 lump sum each stock transfer
Storage charge for unprocessed parent coil languishing on our shop floor in excess of TWO MONTHS. Charged at Month End
£0.50 per tonne per week thereafter
Handling and Storage of material collected out unprocessed (including part processed coil balances returned to stock).
£7.00 per tonne handling £0.50 per tonne per week storage from date of receipt (No Free Period), minimum £3.00 per tonne charge
Storage of processed material languishing on shop floor in excess of 14 days from date of processing. Charged at Month End
£1.00 per tonne per week or part week thereafter (minimum invoice £20)
Coil to Coil Pickling Coil cut/Line stop by customer request
£240 minimum lump sum charge £2 per tonne per line stop
Slitting Coil cut/Line stop by customer request Coil back to stock/taken off
£220 minimum lump sum charge £2 per tonne per line stop £75 lump sum charge
Decoiling More than four length sizes per coil More than eight length sizes per coil Coil back to stock/taken off Lengths >7000mm <8999mm Lengths >9000mm
£180 minimum lump sum charge £2 per tonne extra £4 per tonne extra £75 lump sum Basic + £3 per tonne(Full order) Basic + £6 per tonne(Full order)
Special Packing/Identification Requirements e.g. Strapping timbers to slit coils /colour coding pack ends
Price to be agreed Prior to processing
Material Samples
£25 lump sum per sample
Physical Stock-take charged at £60 per request. Additional charge of £25 per hour for stock verification in customer’s presence
£60.00 per stock-take £25.00 per hour (min. 2 hours)
Coil inspection on site by stock owner following booked visit—minimum 24 hours prior notice. On spec visits by agreement only.
£20 lump sum per coil
SCS Coil cut/Line stop by customer request Coil Recovery
£240 minimum lump sum charge £2 per tonne line stop Basic + £10 per tonne
*subject to change over time
CONTENTS Introduction Machine Specs Further Information Charges
1 2 4 4
Perhaps we never told you about our other services? Recently it came to our attention that customers using one of our services were unaware of our other offerings. This Briefing is designed to put this right and provide you with an overview of all our key services. You may not be aware that Servosteel is the largest Toll Processor in the UK and is unique in being able to offer a “one stop shop” service for pickling and oiling in coil form together with slitting and decoiling. This facility helps customers to avoid
duplicated material handling if using different Toll Processors to slit or decoil after pickling and oiling. In addition to these services, Servosteel’s newest process, SCS, enables us to clean steel using only brushes and water (very environmentally friendly!) and produce extremely flat material with an extended shelf life without the need to oil it after cleaning. At the same time we can improve the condition of damaged coils.
Machine Specifications Servosteel boasts the widest range of strip mill processing under one roof with 24 hr receipt, processing and despatch. This is linked into your online customer account which you can access using a unique code. It is governed by ISO 9001 and ISO 14001 management systems and will make available to you in real time: 1. Your stock in detail. 2. Status of current orders. 3. Your invoices. 4. Live information about vehicles on site.
The principal items of plant now include: • SCS Cleaning Line Annual capacity—200,000 tonnes • Coil to Coil Pickling Line Annual capacity—240,000 tonnes • Two Wide Decoiling Lines Annual capacity—100,000 tonnes • Two Wide Slitting Lines Annual capacity—120,000 tonnes • One Narrow Slitting Line Annual capacity—35,000 tonnes
Slitting Lines
Our Bronx Slitting Lines are built to the highest specifications, with innovative features and system automation resulting in slitting to the highest quality and accuracy with maximum efficiency and productivity.
Machine Specs Initial Material Sizes Max Width coil: 2000mm Min Width coil: 700mm Max Thickness: 10.0mm Min Thickness: 1.4mm
Max O/D: 2000mm Max Weight: 27 tonnes Processing Capabilities Max Cuts at Min Thickness: 18 Max Cuts at Max Thickness: 6
Finished Material Sizes Width Min: 40.0mm I/D Size 1: 508mm I/D size 2: 610mm Max O/D: 2000mm Weight max: 25 tonnes
Coil Pickling Line Push-pull hydrochloric pickle line, supplied by Delta Brands Inc., using shallow bath technology with an acid resistant granite liner.
Max I/D: 950mm Min I/D: 508mm
Slitter 2
Max I/D: 950mm Min I/D: 508mm
Machine Specs
Max O/D: 2100mm Min O/D: 1400mm
Slitter 1
Max Weight: 29 tonnes
Machine Specs
Finished Material Sizes I/D size 1: 610mm I/D size 2: 762mm O/D max: 1950mm
Initial Material Sizes
Initial Material Sizes
Max Width coil: 1525mm Min Width coil: 750mm Max Thickness: 2.8mm Min Thickness: 0.3mm
Processing Capabilities
Max Cuts at Min Thickness: 24 Max Cuts at Max Thickness: 5
Finished Material Sizes Width Min: 26.1mm I/D Size 1: 508mm I/D size 2: 610mm Max O/D: 2000mm Weight Max: 25 tonnes
Slitter 3 Machine Specs
Initial Material Sizes
Max Width coil: 600mm Min Width coil: 20mm Max Thickness: 2.0mm Min Thickness: 0.3mm Max I/D: 610mm Min I/D: 508mm Max O/D: 1775mm Max Weight: 6 tonnes
Max Width coil: 1525mm Min Width coil: 650mm
Max I/D: 950mm Min I/D: 508mm
Processing Capabilities
Max Thickness: 6.5mm Min Thickness: 2.0mm
Max O/D: 2000mm Max Weight: 27 tonnes
Max Cuts at Max Thickness: 6
Max Cuts at Min Thickness: 12
Finished Material Sizes
SCS is hot rolled black material which has been taken through an environmentally friendly process using engineered abrasive rolls and water to produce a ‘napkin clean’, smooth, rust resistant surface. The process does not use any chemicals, acids or heat, but water only.
Machine Specs
Decoiling Lines
BRONX ‘state of the art’ Cut to Length Lines incorporate the latest control technology ensuring the highest level of consistency and accuracy to meet today’s quality demands.
Decoiler 1 Machine Specs
Initial Material Sizes
Max Width coil: 2000mm Min Width coil: 700mm Max Thickness: 12.0mm Min Thickness: 3.0mm
Initial Material Sizes Min Width: 600mm Max Width: 1830mm
Max I/D: 950mm Min I/D: 508mm
Max Thickness: 4.0mm Min Thickness: 0.9mm
Max O/D: 2100mm Min O/D: 1000mm
Max I/D: 950mm Min I/D: 508mm
Max Weight: 29 tonnes
Max O/D: 2100mm Min O/D: 1000mm
Finished Material Sizes I/D Size: 1610mm I/D Size: 2762mm Max length: 12000mm
Decoiler 2 Machine Specs
Initial Material Sizes
Max Width coil: 2000mm Min Width coil: 700mm
Width Min: 14.0mm I/D Size 1: 406mm I/D Size 2: 508mm Max O/D: 1775mm Weight Max: 2,500kg
Max Weight: 29 tonnes
Finished Material Sizes I/D Size: 1610mm I/D Size: 2762mm Max length: 6000mm
Min Thickness: 1.0mm Max Thickness: 8.0mm Min I/D: 483mm Max I/D: 965mm Min O/D: 1200mm Max O/D: 2000mm Max Weight: 30 tonnes
Finished Material Size I/D Size 1: 508mm I/D Size 2: 600mm Max O/D: 2000mm
SCS Line
Related Documents
Servosteel Briefing 3
April 2020 3
Briefing 3
November 2019 6
Briefing
November 2019 40
Briefing
May 2020 18
Briefing
November 2019 28
Briefing
June 2020 19More Documents from "Rosehp"
Scs Briefing - Laser Cutting & Pnc Punching - Issue 1
November 2019 8
Servosteel Briefing 3
April 2020 3
Oma For Air Assessment 2009
May 2020 0
Scs Briefing - Vol. 1 Issue 4
November 2019 7
Environment Agency Audit 2009
April 2020 6