Safety Marks , Standards , Organizations In North America
This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA
Overview
Download & View Safety Marks , Standards , Organizations In North America as PDF for free.
More details
- Words: 370
- Pages: 12
Safety Marks,Standards,Organizations in North America
CHING, Warren CU, Joshua JAVIER, Michael SO, Jonathan UY, Jeckson
UL (Underwriters Laboratories) A non profit, privately owned and operated product safety testing and certification organization.
UL’s Listed mark Indicates that UL has determined that the product meets U. S. safety standards.
Products have been tested and found to comply with applicable Canadian safety standards.
Products determined to comply with both U. S. and Canadian standards.
UL’s Recognized Component and Classified mark Used on electrical components that will be used later in a completed product.
Indicates that the product has been tested with “a limited range of hazards or suitability of use under limited or special conditions”.
CSA (Canadian Standards Association) A leading solutions based standards organization, providing standards development, application products, training and advisory selected services.
CSA’s Certified Mark Indicates that the product meets applicable Canadian standards.
If products that have been found to comply with U.S. standards. *NRTL - “National Recognized Testing Laboratory”
If a product has been found to comply with both U.S. and Canadian standards,
ETL SEKMO A division of Intertek Group specializing in electrical product safety testing, EMC testing, and benchmark performance testing
ETL Listed Mark • has been tested by Intertek, found in compliance with accepted national standards, and meets the minimal requirements required for sale or distribution • assurance that the product is compliant with safety standards
Iba pang orgs pang safe • ASSE – American Society of Safety Engineers • SESHA – Semiconductor Environmental Safety & Health Association • LIA – Laser Institute of America
Applied Research Laboratories, Inc. (ARL) Canadian Standards Association (CSA) (also known as CSA International) Communication Certification Laboratory, Inc. (CCL) Curtis-Straus LLC (CSL) Electrical Reliability Services, Inc. (ERS) (also known as eti Conformity Services and formerly Electro-Test, Inc. (ETI)) Entela, Inc. (ENT) FM Approvals LLC (FM) (formerly Factory Mutual Research Corporation) Pa chek nto kng anu un iba tinanggal ko na Tama ba?: lhat b ng orgs me sariling marks and standards? Idea ko lng: 1. Org 1.1 mark 1.2 standards ndi ata e haha
Standards • Blablabla. . . Chek mu nlng uli msg ni miss pra sure
Sources 1. www.anixter.com/AXECOM/AXEDocLib.nsf/(UnID)/5CF87B840DE6E38 D80256F240075BDB6/$file/S-3_30.pdf 2. http://www.asse.org/about/ 3. http://www.semiconductorsafety.org/about/mission.php3 4. http://www.laserinstitute.org/
5. http://www.intertek-etlsemko.com/portal/page/cust_portal/ITK_PGR/ONLINE_R 6. www.sti.com/ltr2/access.php?file=pdf/802.pdf
CHING, Warren CU, Joshua JAVIER, Michael SO, Jonathan UY, Jeckson
UL (Underwriters Laboratories) A non profit, privately owned and operated product safety testing and certification organization.
UL’s Listed mark Indicates that UL has determined that the product meets U. S. safety standards.
Products have been tested and found to comply with applicable Canadian safety standards.
Products determined to comply with both U. S. and Canadian standards.
UL’s Recognized Component and Classified mark Used on electrical components that will be used later in a completed product.
Indicates that the product has been tested with “a limited range of hazards or suitability of use under limited or special conditions”.
CSA (Canadian Standards Association) A leading solutions based standards organization, providing standards development, application products, training and advisory selected services.
CSA’s Certified Mark Indicates that the product meets applicable Canadian standards.
If products that have been found to comply with U.S. standards. *NRTL - “National Recognized Testing Laboratory”
If a product has been found to comply with both U.S. and Canadian standards,
ETL SEKMO A division of Intertek Group specializing in electrical product safety testing, EMC testing, and benchmark performance testing
ETL Listed Mark • has been tested by Intertek, found in compliance with accepted national standards, and meets the minimal requirements required for sale or distribution • assurance that the product is compliant with safety standards
Iba pang orgs pang safe • ASSE – American Society of Safety Engineers • SESHA – Semiconductor Environmental Safety & Health Association • LIA – Laser Institute of America
Applied Research Laboratories, Inc. (ARL) Canadian Standards Association (CSA) (also known as CSA International) Communication Certification Laboratory, Inc. (CCL) Curtis-Straus LLC (CSL) Electrical Reliability Services, Inc. (ERS) (also known as eti Conformity Services and formerly Electro-Test, Inc. (ETI)) Entela, Inc. (ENT) FM Approvals LLC (FM) (formerly Factory Mutual Research Corporation) Pa chek nto kng anu un iba tinanggal ko na Tama ba?: lhat b ng orgs me sariling marks and standards? Idea ko lng: 1. Org 1.1 mark 1.2 standards ndi ata e haha
Standards • Blablabla. . . Chek mu nlng uli msg ni miss pra sure
Sources 1. www.anixter.com/AXECOM/AXEDocLib.nsf/(UnID)/5CF87B840DE6E38 D80256F240075BDB6/$file/S-3_30.pdf 2. http://www.asse.org/about/ 3. http://www.semiconductorsafety.org/about/mission.php3 4. http://www.laserinstitute.org/
5. http://www.intertek-etlsemko.com/portal/page/cust_portal/ITK_PGR/ONLINE_R 6. www.sti.com/ltr2/access.php?file=pdf/802.pdf
Related Documents
Safety Marks , Standards , Organizations In North America
November 2019 11
North America Safety Standards
November 2019 29
Nissan In North America
July 2020 18
North America
November 2019 60
North America
May 2020 26