Report on PC Logo I chose one of my cousins to try out the PC logo programming. She is a Year 4 student from Sekolah Rendah Amar Pahlawan. As she has never been exposed to this program before, so I have to show her the basic commands that are usually used to make a drawing such as forward (fd), right turn (rt), left turn (lt), clear screen (cs). I also show her how to draw a square using the commands step by step. Then we try to draw another shape by asking her to give the commands that I should type in to draw a rectangle. Then I asked her to create a bigger square and she was able to draw it by using her own commands. She just increased the number from fd 100 to fd 140. Then I asked her to draw another shape and she draws a bigger rectangle. After the rectangle, I asked her to draw other shapes like triangle but she was not able to create the instruction to draw it. As a conclusion, it seems that she can only draw simple shapes that have been showed but no confident to try to draw other shapes. Maybe she has a little knowledge on the topic ‘angle’ and could not relate with this activity.