Red Dot Target 25 Yards

Not for optics mounted on top of a carry handle. 1moa x 1moa

A

B

C

D

E

F

G

H

For use at 25 yards to produce a 50y/200m zero.

25 Yard IBSZ Target for Red-Dot Sights I

J

K

L

M

N

O

P

Q

R

S

T

U

V W

X

Y

Z AA AB AC

1 2 3 4 5 6 7 8 9 10 11 12 13 14

6 moa

15

4 moa

16

2 moa

17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 Notes: 1. Grid squares are 1moa at 25 yards. 2. All rounds should fall in the 4 moa dotted circle, grouped around the center. 3. This is a rough 50y/200M zero, confirm at range when possible

(C) 2006 Forest E. Platt No Commercial Reproductions

Not for optics mounted on top of a carry handle.

25 Yard IBSZ Target for Red-Dot Sights

For use at 25 yards to produce a 50y/200m zero.

Instructions: 1) Dot should fit within the appropriate box. For example a 4moa Aimpoint dot should fit within the white 4moa square box - the dot will be bracked by the larger black box. 2) Fire a group of 3 to 5 rounds, with the dot centered on the appropriate box. 3) All rounds should land in the 4 moa dotted circle, preferably grouped evenly around the center dot. 4) If the group is outside the circle, make appropriate adjusments to move the group into the dotted circle. Remember each square is 1 moa per side (1/4" @ 25 yards). 5) If the group is too large to fit in the circle - practice sight picture, breath control, and trigger squeeze till groups are sufficiently small. 6) This is an approximaton, confirm zero at 50y (or better yet 200M) when such a range is available. 7) Optics should have a Heigh-Over-Bore of 2.6" +/- 0.25" (meaning no optics mounted on top of the carry handle).

Notes: 1. Grid squares are 1moa at 25 yards. 2. All rounds should fall in the 4 moa dotted circle, grouped around the center. 3. This is a rough 50y/200M zero, confirm at range when possible

(C) 2006 Forest E. Platt No Commercial Reproductions