Qcs
This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA
Overview
Download & View Qcs as PDF for free.
More details
- Words: 514
- Pages: 3
QCS ROBOT TOOLING SYSTEM QUICK CHANGE SYSTEM QCS provides a cost-effective method to increase productivity by virtually eliminating end-of-arm tool change-over time. With QCS, a robot can be re-tooled for a different part and back in service within a few minutes. Compressed air and vacuum lines are automatically connected as the tool plate mates with the clamp base on the robot arm. The clamp handle can be indexed to a convenient position in 30-degree increments.
A
0.61 [15.5]
SIDE
B
2.44 [62] 0.49 [12.4]
SIDE
0.49 [12.4]
1.41 [35.8] 0.55 [14]
0.49 [12.4] 2.57 [65.3] 6.11 [155]
M5 x 0.8 (10-32 UNF) 4 PLACES O-RING SEALS 8 PLACES G1/8 NPSF 2 PLACES
TOOLING
OPTIONS A A = Handle on Side "A" B = Handle on Side "B" C = Custom Mounting* *Submit worksheet from page 17:5 or drawing with order.
©2008 EDCO USA. www.edcousa.net
[10 7]
5 3.9 Weight: lb. (g) 1.41 (638)
HOW TO ORDER QCS-100B-
4.2 1
17:3
0] [10
0.97 [24.6]
0.35 [8.9]
ROBOT CLAMP BASE
3.7
3.4 6
]
[94
TOOL PLATE [87 .9]
HOW TO ORDER
0.25 [6.4]
0.2 [5.1]
QCS ROBOT TOOLING SYSTEM
OPTIONS
QCS-100TWeight: lb. (g) 0.85 (383)
6 3.4
3.4 6
TOOL PLATE
.9] [87 2. [62 46 .5]
C (BLANK) = As Pictured C = Custom Mounting* *Submit worksheet from page 17:5 or drawing with order.
HOW TO ORDER
6 2.4 .5] 2 [6
OPTIONS
QCS-100TD[87 .9]
C (BLANK) = As Pictured C = Custom Mounting
Weight: lb. (g) 0.77 (347)
TOOL PARK
75 ] 2. 9.9 [6
4.45 [113 ]
45 3.
] .6 7 [8
0.46 [11.7]
QCS-100P 4.04 [103 ]
0.21 [5.3]
TOOLING
HOW TO ORDER
An optional Tool Park provides convenient storage and protection for end-of-arm tools when not in service. One Tool Park per Tool Plate is required for efficient operation.
Weight: lb. (g) 0.39 (178)
17:4
©2008 EDCO USA. www.edcousa.net
QCS ROBOT TOOLING SYSTEM QUICK CHANGE SYSTEM QCS provides a cost-effective method to increase productivity by virtually eliminating end-of-arm tool change-over time. With QCS, a robot can be re-tooled for a different part and back in service within a few minutes. Compressed air and vacuum lines are automatically connected as the tool plate mates with the clamp base on the robot arm. The clamp handle can be indexed to a convenient position in 30-degree increments.
A
B
SIDE
5.25 [133]
0.75 [19.1]
0.75 [19.1]
0.75 [19.1]
1.41 [35.8]
5.25 [133]
SIDE 0.61 [15.5]
0.75 [19.1]
8.81 [224]
TOOL PLATE 4.7
HOW TO ORDER
[15 7]
0.25 [6.4]
OPTION
6.1 8
9]
[11
QCS-140T C = Custom Mounting* *Submit worksheet from page 17:5 or drawing with order.
Weight: lb. (g) 1.91 (866)
G1/8 NPSF 8 PLACES
G1/8 NPSF 8 PLACES
O-RING SEALS 8 PLACES
TOOLING
ROBOT CLAMP BASE
OPTION
QCS-140 A = Handle on Side A B = Handle on Side B C = Custom Mounting* *Submit worksheet from page 17:5 or drawing with order.
0.97 [24.6] 0.35 [8.9]
HOW TO ORDER
6.9 3
Weight: lb. (g) 2.58 (1169)
17:6
[17 6]
5 4.9
6] [12
©2008 EDCO USA. www.edcousa.net
A
0.61 [15.5]
SIDE
B
2.44 [62] 0.49 [12.4]
SIDE
0.49 [12.4]
1.41 [35.8] 0.55 [14]
0.49 [12.4] 2.57 [65.3] 6.11 [155]
M5 x 0.8 (10-32 UNF) 4 PLACES O-RING SEALS 8 PLACES G1/8 NPSF 2 PLACES
TOOLING
OPTIONS A A = Handle on Side "A" B = Handle on Side "B" C = Custom Mounting* *Submit worksheet from page 17:5 or drawing with order.
©2008 EDCO USA. www.edcousa.net
[10 7]
5 3.9 Weight: lb. (g) 1.41 (638)
HOW TO ORDER QCS-100B-
4.2 1
17:3
0] [10
0.97 [24.6]
0.35 [8.9]
ROBOT CLAMP BASE
3.7
3.4 6
]
[94
TOOL PLATE [87 .9]
HOW TO ORDER
0.25 [6.4]
0.2 [5.1]
QCS ROBOT TOOLING SYSTEM
OPTIONS
QCS-100TWeight: lb. (g) 0.85 (383)
6 3.4
3.4 6
TOOL PLATE
.9] [87 2. [62 46 .5]
C (BLANK) = As Pictured C = Custom Mounting* *Submit worksheet from page 17:5 or drawing with order.
HOW TO ORDER
6 2.4 .5] 2 [6
OPTIONS
QCS-100TD[87 .9]
C (BLANK) = As Pictured C = Custom Mounting
Weight: lb. (g) 0.77 (347)
TOOL PARK
75 ] 2. 9.9 [6
4.45 [113 ]
45 3.
] .6 7 [8
0.46 [11.7]
QCS-100P 4.04 [103 ]
0.21 [5.3]
TOOLING
HOW TO ORDER
An optional Tool Park provides convenient storage and protection for end-of-arm tools when not in service. One Tool Park per Tool Plate is required for efficient operation.
Weight: lb. (g) 0.39 (178)
17:4
©2008 EDCO USA. www.edcousa.net
QCS ROBOT TOOLING SYSTEM QUICK CHANGE SYSTEM QCS provides a cost-effective method to increase productivity by virtually eliminating end-of-arm tool change-over time. With QCS, a robot can be re-tooled for a different part and back in service within a few minutes. Compressed air and vacuum lines are automatically connected as the tool plate mates with the clamp base on the robot arm. The clamp handle can be indexed to a convenient position in 30-degree increments.
A
B
SIDE
5.25 [133]
0.75 [19.1]
0.75 [19.1]
0.75 [19.1]
1.41 [35.8]
5.25 [133]
SIDE 0.61 [15.5]
0.75 [19.1]
8.81 [224]
TOOL PLATE 4.7
HOW TO ORDER
[15 7]
0.25 [6.4]
OPTION
6.1 8
9]
[11
QCS-140T C = Custom Mounting* *Submit worksheet from page 17:5 or drawing with order.
Weight: lb. (g) 1.91 (866)
G1/8 NPSF 8 PLACES
G1/8 NPSF 8 PLACES
O-RING SEALS 8 PLACES
TOOLING
ROBOT CLAMP BASE
OPTION
QCS-140 A = Handle on Side A B = Handle on Side B C = Custom Mounting* *Submit worksheet from page 17:5 or drawing with order.
0.97 [24.6] 0.35 [8.9]
HOW TO ORDER
6.9 3
Weight: lb. (g) 2.58 (1169)
17:6
[17 6]
5 4.9
6] [12
©2008 EDCO USA. www.edcousa.net
Related Documents
Qcs
May 2020 0