Ps Sww 50 Spec Sheet

ITEM #______________________________

SPECIFICATIONS

Weld-In

Specify Desired Electrical Service

Silverware Pre-Washing System

PS-SWW-50

Power Soak Systems, Inc. 903 E 104th St. Suite 130 Kansas City, MO 64131 Ph: 816-222-2400 www.powersoak.com

(2) removable stainless steel wash tank baskets included.

Standard Specifications

Structural: 3/4 HP 208/230V Single Phase 4.1 / 4.0 Amp • 304 stainless steel construction with 14 gauge tank / rim. • Mounting bracket and mounting studs for control panel 3/4 HP 115V Single Phase 8.4 Amp included. Enables easy mounting of control panel to wall, dish table or wash tank. Options • Minimal footprint in dish table. Additional wash tank baskets (Part #32462). Specify number of baskets here _________

Electrical: • 3/4 HP continuous heavy duty (TEFC) motor. • On/Off control panel with 1/2” conduit connection. Plumbing: • 1/2” single handle faucet “hot only” included. • 1.5” inside diameter ball valve drain provided. • 11 gallon wash tank capacity.

Aluminum basket inserts for tarnish control on silverplate or sterling silverware (Box of 5 - Part #32967).

Considerations

Electrical: • Hardwire electrical connection needed. Operational: • (2) removable stainless steel wash tank baskets included. • 1/2” conduit connected required. • Recirculating 600GPM wash flow rate. Plumbing: • 1/2” hot water supply line needed for fill source. Warranty: • 1 1/2” drain line connection. • Three years parts and labor warranty.

June 24, 2009 2:21 PM

- Page 1 -

Patents Pending

Weld-In

Operational: • Low foaming, enzyme based chemical recommended for optimal washing results.

Isometric View:

Plan View:

Optional front of tank control panel mounting location

Elevation View:

Table Cutout Information:

Dimensions shown are out-out of silverware washer body.

Mounting Bracket Dimensions:

Power Soak Systems | 903 E. 104th Street Suite 130 | Kansas City, MO 64131 | 816.222.2400 Page 2

Patents Pending