Presentation Unit 7.pptx

Group 5: Phạm Phương Nhi Nguyễn Khánh Linh

1

2

1

2

3

4

3

4

5

6

5

6

7

8

7

8

Unit 7: Procedure and precaution

1, Describing health and safety precaution

2, Emphasis the importance of precautions

corrosive (a) /kəˈrəʊsɪv/ Tending to destroy something slowly by chemical action

irritant (adj) /ˈɪrɪtənt/

making part of yourbody sore

Silo (n) /ˈsaɪləʊ/

a tall tower on a farm used for storing grain, etc.

guard rail (n) /ˈɡɑːd reɪl/

Confined space (n) /kənˈfaɪnd speɪs/

CO2 detector (n) /dɪˈtektə(r)/

splash on the skin (v) /splæʃ/

to make somebody/something wet by making water, mud, etc. fall on them/it

PPE? Personal Protective Equipment

Naked flame/ sparks (n) /ˈneɪkɪd fleɪm/ /spɑːks/

Music stops

Video and discussion 1. What is the content of the video?

2. What is the main danger/hazard? 3. To be safe, what should we do?

DISCUSSION 1. What are the reasons why workplace safety is important? 2. You want to make improvements in workplace safety conditions, but the manager opposes it saying it is expensive and unnecessary. How would you approach the subject? 21

SUGGESTED ANSWERS 1. The reasons why workplace safety is important: - To create a safe working environment - To protect employees and the employer from death or injury - To teach the workers to pay attention to their surroundings 2. As a worker, you have a legal right to have a safe and healthful workplace. - Refuse work that puts you in immediate danger of serious harm - Make a complaint about workplace hazards to someone in your workplace such as a worker representative, or even the Ministry of Labour. 22

RESTRICTED AREAS

A place where a serious danger is present

23

A PERMIT TO WORK (WORK PERMIT)

A written form giving permission to work in a restricted area 24

THE ELECTRICAL SUPERVISOR The person responsible for electrical safety for the whole plant, and the only person authorised to issue permits to work 25

THE LOCK- OUT PROCEDURE The procedure of having a single key to switchboards, ensuring only one person has access to switchgear at any given time

26

27

28

1. What are the reasons why workplace safety is important? A. To create a safe working environment B. To protect employees and the employer from death or injury C. To teach the workers to pay attention to their surroundings D. All A, B, C are the correct answers 29

2. What is a permit to work? A. A place where a serious danger is present B. A written form giving permission to work in a restricted area C. A job where you can only travel once or twice a year 30

3. To finish working on electrical circuits, we should: A. Tighten connections fully and test circuit- no current B. Do not damage insulation and isolate circuit at switchboard C. Check no loose wires and test circuit 31

4. How many workers in Vietnam were injured from the first 6 months in 2018?

A. 3.988

B. 4.113 C. 5.567 32

HOMEWORK -

Learn the new words Do all the tasks in the book page 56- 57 Do LMS tasks Remember to translate the text in the book for the upcoming examination

33

34