Plas Inj Des
This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA
Overview
Download & View Plas Inj Des as PDF for free.
More details
- Words: 961
- Pages: 3
Plastics Injection Mould Design Short Courses at Smithers Rapra, Shawbury, UK Presented by John R. Hind, BSc., MSc. 16-17 June, 2009 6-7 October, 2009
Smithers Rapra Training - supporting people in manufacturing from design to production with plastics and rubber materials technology, quality management and business improvement training www.rapratraining.com Rapra Training is produced by
www.rapra.net
www.ismithers.net
Plastics Injection Mould Design 2-day Training Course 16-17 June 2009 6-7 October 2009
n How mould design can influence product quality n The importance of mould cooling; gate and runner design etc. n How to identify faults relating to mould design/manufacture
Overview An awareness of the technicalities of mould design will improve communications between product designers and mould designers and reduce costly errors and delays.
Who will benefit? Product designers and others involved in the design or development of new products; technical/purchasing managers; process engineers and technicians.
Objectives As a result of attending this course participants will learn: n How moulds are made, the effect on cost and timing n How moulds are constructed; the elements and terminology used
n How to make mould design improvements
Methods of cooling various core/ cavity shapes.
Machine tools, die sinking, spark erosion, hobbing, castings etc. n General Mould Construction Terminology, mould cavities and cores, bolsters, use of inserts, parting line, line of draw, draft angle. Prototype moulds. n The Two Plate Mould Runner and gate design, ejector systems, venting mould shrinkage, methods of location and aligning each half, mould venting.
Must be received prior to attending the course and can be made in £Sterling, E Euro or $US. Course fee includes course notes, lunches and refreshments. Accommodation is not included. However, Smithers Rapra has negotiated rates with several hotels nearby. Details will be sent on confirmation of booking.
Cancellations and Transfers
Please note, we endeavour to accommodate our delegates’ requests, however, most of our courses have limited numbers to maximise the interactivity between delegates and presenters. Cancellations or transfers at late notice may jeopardise the commercial viability of
n Mould Finishes Polishing, texturing, etc. Presenter John R. Hind, BSc., MSc. Course Fee £525.00 + VAT, includes course manual, lunches & refreshments accommodation not included.
n Multiplate Moulds Three plate tools, stack moulds. n Undercut Moulds
the course. For this reason we are obliged to charge the following administration fees or surcharges.
Payment
Low carbon, pretoughened, fully hardening and stainless steels. Non ferrous materials, case hardening, nitriding etc. Materials for prototype moulds. n Mould Cooling
Tailor-made Training Courses:
Registration can only be accepted if made in writing, by fax, post or on our secure website: www.rapratraining.com
n Mould Materials and Heat Treatment
n Methods of Mould Manufacture
Internal and external undercuts, splits, side cores/cavities, hydraulics, internal threads, etc.
Conditions of Registration
Basic types, advantages and limitations.
Contents
n How component design can effect mould cost, lead time and mould maintenance
Courses can be delivered ‘in-company’ and tailored to your company’s products and materials. Please contact The Training Business Manager at Smithers Rapra, telephone +44(0)1939 250383 or e-mail [email protected] if you wish to discuss.
n Runnerless Moulds
Cancellations made up to 14 days or more before the requested course date will be refunded, less a 20% administration fee. Requests to transfer made up to 14 days or more before the requested course date will be accommodated, subject to availability of places on the new course date and transfer conditions, see below. Cancellations and requests to transfer made within 14 days of the course date will be subject to the FULL course fee and no refund will be given.
Transfer conditions
All requests to transfer must be confirmed in writing by the delegate requesting the transfer, or their booking representative. The option to transfer can be used only once, after which non-attendance will be treated as a cancellation and all outstanding invoices will be due. Smithers Rapra cannot automatically guarantee a place on the next schedule course date. Delegate substitutions can be made at any time without incurring penalty.
Smithers Rapra is centrally located (in the UK) on the A53 near the village of Shawbury about 7 miles (11km) North-East from Shrewsbury in Shropshire, within easy reach of the M6 and M54 motorways, less than one and a half hours drive from Birmingham, Manchester and Liverpool airports and approximately 7 miles from the mainline railway station (Shrewsbury) which has regular rail services to Birmingham (New Street) and London (Euston). A map giving directions will be sent on confirmation of booking.
Fax to
Registration Form
+44 (0)1939 251118
Please reserve a place on the Plastics Injection Mould Design Course: Date ........................................................................................................................................................................ (please use one form per delegate, photocopies are acceptable) Surname.....................................................................................................................................................................................................................................Title....................................................... Forename.................................................................................................................................................................................................................................................................................................. Job Title/Position.................................................................................................................................................................................................................................................................................... Company ................................................................................................................................................................................................................................................................................................ Contact Address Invoice Address (if different)
Company..................................................................................................................................
Company..................................................................................................................................
Title/Position ..........................................................................................................................
Address......................................................................................................................................
Address......................................................................................................................................
.....................................................................................................................................................
.....................................................................................................................................................
.....................................................................................................................................................
..................................................................................................................................................... Telephone (main) ................................................................................................................
Telephone.................................................................................................................................
Fax...............................................................................................................................................
Fax...............................................................................................................................................
Email...........................................................................................................................................
Email...........................................................................................................................................
Payment Information
Payment must be received prior to attending the seminar and can be made in £ Sterling, € Euro or $US. Please indicate in which currency you wish to pay. If no box has been ticked the default currency will be £ Sterling. £ Sterling
€ Euro
(This will be applicable at the prevailing rate)
$US (This will be applicable at the prevailing rate)
Please invoice my company - Purchase Order Number (if required) Cheque/Bank Transfer Payment enclosed (please make cheques payable to Rapra Technology) Credit Card Payment:
MasterCard
Visa
American Express (please indicate)
Signature
Expiry Date:
Name on Credit Card (in CAPITALS) Security Number (as printed in signature box on reverse of card)
Return to: Cal Parkinson, Training Dept, Smithers Rapra Technology Limited, Shawbury, Shrewsbury, Shropshire, SY4 4NR, United Kingdom. Tel: +44(0)1939 250383 Fax: +44(0)1939 251118 Email: [email protected] Cancellation Terms: By completing and returning this form delegates are agreeing to be bound by conditions of registration.
Enrol online at:
www.rapratraining.com
Smithers Rapra Training - supporting people in manufacturing from design to production with plastics and rubber materials technology, quality management and business improvement training www.rapratraining.com Rapra Training is produced by
www.rapra.net
www.ismithers.net
Plastics Injection Mould Design 2-day Training Course 16-17 June 2009 6-7 October 2009
n How mould design can influence product quality n The importance of mould cooling; gate and runner design etc. n How to identify faults relating to mould design/manufacture
Overview An awareness of the technicalities of mould design will improve communications between product designers and mould designers and reduce costly errors and delays.
Who will benefit? Product designers and others involved in the design or development of new products; technical/purchasing managers; process engineers and technicians.
Objectives As a result of attending this course participants will learn: n How moulds are made, the effect on cost and timing n How moulds are constructed; the elements and terminology used
n How to make mould design improvements
Methods of cooling various core/ cavity shapes.
Machine tools, die sinking, spark erosion, hobbing, castings etc. n General Mould Construction Terminology, mould cavities and cores, bolsters, use of inserts, parting line, line of draw, draft angle. Prototype moulds. n The Two Plate Mould Runner and gate design, ejector systems, venting mould shrinkage, methods of location and aligning each half, mould venting.
Must be received prior to attending the course and can be made in £Sterling, E Euro or $US. Course fee includes course notes, lunches and refreshments. Accommodation is not included. However, Smithers Rapra has negotiated rates with several hotels nearby. Details will be sent on confirmation of booking.
Cancellations and Transfers
Please note, we endeavour to accommodate our delegates’ requests, however, most of our courses have limited numbers to maximise the interactivity between delegates and presenters. Cancellations or transfers at late notice may jeopardise the commercial viability of
n Mould Finishes Polishing, texturing, etc. Presenter John R. Hind, BSc., MSc. Course Fee £525.00 + VAT, includes course manual, lunches & refreshments accommodation not included.
n Multiplate Moulds Three plate tools, stack moulds. n Undercut Moulds
the course. For this reason we are obliged to charge the following administration fees or surcharges.
Payment
Low carbon, pretoughened, fully hardening and stainless steels. Non ferrous materials, case hardening, nitriding etc. Materials for prototype moulds. n Mould Cooling
Tailor-made Training Courses:
Registration can only be accepted if made in writing, by fax, post or on our secure website: www.rapratraining.com
n Mould Materials and Heat Treatment
n Methods of Mould Manufacture
Internal and external undercuts, splits, side cores/cavities, hydraulics, internal threads, etc.
Conditions of Registration
Basic types, advantages and limitations.
Contents
n How component design can effect mould cost, lead time and mould maintenance
Courses can be delivered ‘in-company’ and tailored to your company’s products and materials. Please contact The Training Business Manager at Smithers Rapra, telephone +44(0)1939 250383 or e-mail [email protected] if you wish to discuss.
n Runnerless Moulds
Cancellations made up to 14 days or more before the requested course date will be refunded, less a 20% administration fee. Requests to transfer made up to 14 days or more before the requested course date will be accommodated, subject to availability of places on the new course date and transfer conditions, see below. Cancellations and requests to transfer made within 14 days of the course date will be subject to the FULL course fee and no refund will be given.
Transfer conditions
All requests to transfer must be confirmed in writing by the delegate requesting the transfer, or their booking representative. The option to transfer can be used only once, after which non-attendance will be treated as a cancellation and all outstanding invoices will be due. Smithers Rapra cannot automatically guarantee a place on the next schedule course date. Delegate substitutions can be made at any time without incurring penalty.
Smithers Rapra is centrally located (in the UK) on the A53 near the village of Shawbury about 7 miles (11km) North-East from Shrewsbury in Shropshire, within easy reach of the M6 and M54 motorways, less than one and a half hours drive from Birmingham, Manchester and Liverpool airports and approximately 7 miles from the mainline railway station (Shrewsbury) which has regular rail services to Birmingham (New Street) and London (Euston). A map giving directions will be sent on confirmation of booking.
Fax to
Registration Form
+44 (0)1939 251118
Please reserve a place on the Plastics Injection Mould Design Course: Date ........................................................................................................................................................................ (please use one form per delegate, photocopies are acceptable) Surname.....................................................................................................................................................................................................................................Title....................................................... Forename.................................................................................................................................................................................................................................................................................................. Job Title/Position.................................................................................................................................................................................................................................................................................... Company ................................................................................................................................................................................................................................................................................................ Contact Address Invoice Address (if different)
Company..................................................................................................................................
Company..................................................................................................................................
Title/Position ..........................................................................................................................
Address......................................................................................................................................
Address......................................................................................................................................
.....................................................................................................................................................
.....................................................................................................................................................
.....................................................................................................................................................
..................................................................................................................................................... Telephone (main) ................................................................................................................
Telephone.................................................................................................................................
Fax...............................................................................................................................................
Fax...............................................................................................................................................
Email...........................................................................................................................................
Email...........................................................................................................................................
Payment Information
Payment must be received prior to attending the seminar and can be made in £ Sterling, € Euro or $US. Please indicate in which currency you wish to pay. If no box has been ticked the default currency will be £ Sterling. £ Sterling
€ Euro
(This will be applicable at the prevailing rate)
$US (This will be applicable at the prevailing rate)
Please invoice my company - Purchase Order Number (if required) Cheque/Bank Transfer Payment enclosed (please make cheques payable to Rapra Technology) Credit Card Payment:
MasterCard
Visa
American Express (please indicate)
Signature
Expiry Date:
Name on Credit Card (in CAPITALS) Security Number (as printed in signature box on reverse of card)
Return to: Cal Parkinson, Training Dept, Smithers Rapra Technology Limited, Shawbury, Shrewsbury, Shropshire, SY4 4NR, United Kingdom. Tel: +44(0)1939 250383 Fax: +44(0)1939 251118 Email: [email protected] Cancellation Terms: By completing and returning this form delegates are agreeing to be bound by conditions of registration.
Enrol online at:
www.rapratraining.com
Related Documents
Plas Inj Des
May 2020 0
Firearm Inj
November 2019 10
Inj Report
May 2020 10
Bt Noorder Ij-plas
May 2020 4
3.radiation Inj
November 2019 5