Pemko Products Condensed Catalog.pdf

Architectural Door Accessories

Pemko Condensed Catalog

Pemko Condensed Catalog

About This condensed catalog is designed to introduce you to some of the Pemko products that are available. There are many Pemko products that are not included in this catalog. Please visit our website www.pemko.com to view the complete product line. Catalogs and other information is available for download. Call Pemko Customer Service at 1-800-824-3018 for additional information and technical service.

Contents PemkoHinge® Continuous Geared Hinges . . . . . . . . . . . . . . . 3-4 Markar Continuous Hinges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6 Commercial Thresholds. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-11 Eco-V® Thresholds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Modular Ramps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Door Bottoms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-17 Acoustic Automatic Door Bottoms . . . . . . . . . . . . . . . . . . . . . . . 15 Astragals and Meeting Stiles . . . . . . . . . . . . . . . . . . . . . . . . . 17-18 Brush Gasketing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-20 Perimeter Gasketing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21-22 Adhesive Gasketing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23-24 Acoustic Seal Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Sliding and Folding Hardware . . . . . . . . . . . . . . . . . . . . . . . . 26-27 Lites and Louvers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Index: PRODUCT PAGE 154SS. . . . . . . . . . . . . . . . . . . 9 1571. . . . . . . . . . . . . . . . . . . . 7 158 . . . . . . . . . . . . . . . . . . . . . 7 171 . . . . . . . . . . . . . . . . . . . . . 8 1715. . . . . . . . . . . . . . . . . . . . 9 1717. . . . . . . . . . . . . . . . . . . . 9 1718. . . . . . . . . . . . . . . . . . . . 9 172 . . . . . . . . . . . . . . . . . . . . . 8 175SS. . . . . . . . . . . . . . . . . . . 9 176 . . . . . . . . . . . . . . . . . . . . . 8 179_T. . . . . . . . . . . . . . . . . . 11 18041_NB . . . . . . . . . 18, 20 18061_NB . . . . . . . . . . . . . 20 18062_NB . . . . . . . . . . . . . 20 18100_NB . . . . . . . . . . . . . 20 18175_NB . . . . . . . . . . . . . 20 18250_NB . . . . . . . . . . . . . 20 18400_NB . . . . . . . . . . . . . 20 2005_T . . . . . . . . . . . . . . . . 11 2006_T . . . . . . . . . . . . . . . . 11 2009_PK . . . . . . . . . . . . . . . 11 211_V . . . . . . . . . . . . . . . . . 16 211_PK . . . . . . . . . . . . . . . . 16 215_V . . . . . . . . . . . . . . . . . 16 215_PK . . . . . . . . . . . . . . . . 16 2113_V . . . . . . . . . . . . . . . . 16 2170_V . . . . . . . . . . . . . . . . 16 2173_V . . . . . . . . . . . . . . . . 16 2213_PK773 . . . . . . . . . . . 16 222_V . . . . . . . . . . . . . . . . . 16 222_PK . . . . . . . . . . . . . . . . 16 225_V . . . . . . . . . . . . . . . . . 16 225_PK . . . . . . . . . . . . . . . . 16 2211_V . . . . . . . . . . . . . . . . 16 2211_PK . . . . . . . . . . . . . . . 16 2251_V . . . . . . . . . . . . . . . . 16

PRODUCT PAGE 2251_PK . . . . . . . . . . . . . . . 16 234_V . . . . . . . . . . . . . . . . . 16 234_PK . . . . . . . . . . . . . . . . 16 2343_V . . . . . . . . . . . . . . . . 16 252X2_FG. . . . . . . . . . . . . . 10 252X3_FG. . . . . . . . . . . . . . 10 252x3SSFG. . . . . . . . . . . . . . 9 252x226_FGT . . . . . . . . . . 11 253 . . . . . . . . . . . . . . . . . . . . . 7 253X4_FG. . . . . . . . . . . . . . 10 253SSFG . . . . . . . . . . . . . . . . 9 254x226_FGT . . . . . . . . . . 11 254X4_FG. . . . . . . . . . . . . . 10 254x226_FGT . . . . . . . . . . 11 2548. . . . . . . . . . . . . . . . . . . . 8 2555. . . . . . . . . . . . . . . . . . . . 7 255X5_FG. . . . . . . . . . . . . . 10 270 . . . . . . . . . . . . . . . . . . . . . 8 271 . . . . . . . . . . . . . . . . . . . . . 8 2715. . . . . . . . . . . . . . . . . . . . 9 272 . . . . . . . . . . . . . . . . . . . . . 8 273x224_FGT . . . . . . . . . . 11 273X3_FG. . . . . . . . . . . . . . 10 273X4_FG. . . . . . . . . . . . . . 10 274 . . . . . . . . . . . . . . . . . . . . . 7 2749. . . . . . . . . . . . . . . . . . . . 8 2755. . . . . . . . . . . . . . . . . . . . 7 279x292_FGPK. . . . . . . . . 11 2891_S . . . . . . . . . . . . . . . . 22 2892_V . . . . . . . . . . . . . . . . 22 2893_V . . . . . . . . . . . . . . . . 22 28945_NB . . . . . . . . . . . . . 22 290_PK . . . . . . . . . . . . . . . . 22 2902_V . . . . . . . . . . . . . . . . 22 2903_V . . . . . . . . . . . . . . . . 22 29045_NB . . . . . . . . . . . . . 22

PRODUCT PAGE 29310_S . . . . . . . . . . . 17, 21 293100_NB . . . . . . . . . . . . 20 29324_NB . . . . . . . . . . . . . 20 297_S. . . . . . . . . . . . . . 17, 21 303_S. . . . . . . . . . . . . . 17, 21 305_N . . . . . . . . . . . . . . . . . 18 306_V . . . . . . . . . . . . . . . . . 21 369_P. . . . . . . . . . . . . . . . . . 18 312_R. . . . . . . . . . . . . . . . . . 21 313_N . . . . . . . . . . . . . . . . . 18 315_N . . . . . . . . . . . . . . . . . 17 3151_N . . . . . . . . . . . . . . . . 17 321_N . . . . . . . . . . . . . . . . . 17 322_SPK . . . . . . . . . . . . . . . 21 345_NB . . . . . . . . . . . . . . . . 17 345_P. . . . . . . . . . . . . . . . . . 17 345_V . . . . . . . . . . . . . . . . . 17 3452_NB. . . . . . . . . . . . . . . 17 350_SPK . . . . . . . . . . . . . . . 21 350_SR . . . . . . . . . . . . . . . . 21 35041_NB . . . . . . . . . . . . . 19 35061_NB . . . . . . . . . . . . . 19 351_/351_S . . . . . . . . . . . . 18 355_S. . . . . . . . . . . . . . . . . . 18 356_V . . . . . . . . . . . . . . . . . 18 357_ with S88. . . . . . . . . . 18 369_P. . . . . . . . . . . . . . . . . . 18 369_PK . . . . . . . . . . . . . . . . 18 369_PK773 . . . . . . . . . . . . 18 369_S. . . . . . . . . . . . . . . . . . 18 3692_PK773 . . . . . . . . . . . 16 379_S. . . . . . . . . . . . . . . . . . 21 411_NBL . . . . . . . . . . . . . . . 15 411_RL . . . . . . . . . . . . . . . . 15 4131_NBL. . . . . . . . . . . . . . 14 4131_RL . . . . . . . . . . . . . . . 14

PRODUCT PAGE 420_PKL . . . . . . . . . . . . . . . 15 4301_NBL. . . . . . . . . . . . . . 14 4301_RL . . . . . . . . . . . . . . . 14 434_NBL . . . . . . . . . . . . . . . 14 434_RL . . . . . . . . . . . . . . . . 14 45041_NB . . . . . . . . . . . . . 19 45061_NB . . . . . . . . . . . . . 19 45062_NB . . . . . . . . . . . . . 19 45100_NB . . . . . . . . . . . . . 19 45175_NB . . . . . . . . . . . . . 19 45250_NB . . . . . . . . . . . . . 19 5025_SB . . . . . . . . . . . . . . . 20 5061_NB. . . . . . . . . . . . . . . 20 566 . . . . . . . . . . . . . . . . . . . . . 7 573x5_FG . . . . . . . . . . . . . . 10 ACP112 . . . . . . . . . . . . . . . . 22 ADJ232V8. . . . . . . . . . . . . . 12 AM44 . . . . . . . . . . . . . . . . . . 23 AM88 . . . . . . . . . . . . . . . . . . 23 Bypass Track Series . . . . . 26 EG308 . . . . . . . . . . . . . . . . . . 6 EV232. . . . . . . . . . . . . . . . . . 12 EV2320 . . . . . . . . . . . . . . . . 12 EV2322 . . . . . . . . . . . . . . . . 12 EV2325 . . . . . . . . . . . . . . . . 12 FM . . . . . . . . . . . . . . . . . . . . . . 3 FM300 . . . . . . . . . . . . . . . . . . 5 FM3500. . . . . . . . . . . . . . . . . 5 FM900 . . . . . . . . . . . . . . . . . . 6 FM_SLF. . . . . . . . . . . . . . . . . . 3 Folding 100 Series. . . . . . 26 FS . . . . . . . . . . . . . . . . . . . . . . . 4 FS_BP . . . . . . . . . . . . . . . . . . . 4 FS_CP . . . . . . . . . . . . . . . . . . . 4 HG305 . . . . . . . . . . . . . . . . . . 6 HG3505 . . . . . . . . . . . . . . . . 5

PRODUCT PAGE HS . . . . . . . . . . . . . . . . . . . . . . 4 HSS1000. . . . . . . . . . . . . . 24 HSS2000. . . . . . . . . . . . . . 24 HSS2000xS44 . . . . . . . . . 24 HSS2000xS88 . . . . . . . . . 24 LT-B1. . . . . . . . . . . . . . . . . . 27 LV-IY . . . . . . . . . . . . . . . . . . 27 PDB411_E. . . . . . . . . . . . . 15 PDB4131_E . . . . . . . . . . . 15 PDL . . . . . . . . . . . . . . . . . . . 24 PDLBRKT . . . . . . . . . . . . . . 24 PK33 . . . . . . . . . . . . . . . . . . 24 PK55 . . . . . . . . . . . . . . . . . . 24 R.5OS . . . . . . . . . . . . . . . . . 13 R.5OSMR. . . . . . . . . . . . . . 13 R.75OSS . . . . . . . . . . . . . . 13 R.75OSSMR . . . . . . . . . . . 13 R1F . . . . . . . . . . . . . . . . . . . 13 R1FMR . . . . . . . . . . . . . . . . 13 S44 . . . . . . . . . . . . . . . . . . . 23 S77 . . . . . . . . . . . . . . . . . . . 23 S771 . . . . . . . . . . . . . . . . . . 24 S771x6 . . . . . . . . . . . . . . . 24 S772 . . . . . . . . . . . . . . . . . . 24 S773 . . . . . . . . . . . . . . . . . . 23 S776 . . . . . . . . . . . . . . . . . . 23 S88 . . . . . . . . . . . . . . . . . . . 23 Sliding 200 Series . . . . . 26 W60 . . . . . . . . . . . . . . . . . . 27 WT_FM . . . . . . . . . . . . . . . . 4 X25M . . . . . . . . . . . . . . . . . . 3 XF. . . . . . . . . . . . . . . . . . . . . . 3 XI . . . . . . . . . . . . . . . . . . . . . . 3 XM. . . . . . . . . . . . . . . . . . . . . 3

800-824-3018 | www.pemko.com Check the web site for the up-to-date catalog

2

Copyright © 2012-2017 Pemko Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Pemko Manufacturing Company is prohibited.

Pemko Condensed Catalog

PemkoHinge® Continuous Geared Hinges A PemkoHinge® consists of two full-height, paired and geared leaves. Each geared leaf rotates evenly from top to bottom riding on proprietary polymer blended bearings. The geared leaves and bearings are held together by a full-length channel cap. This assembly retains the smooth, clean lines of the door and frame, while easily supporting heavy vertical loads. Electrical Modifications: The cycle performance of the electrically modified hinge has been vastly improved. Performance testing has shown that 3,000,000+ cycles can now be achieved using Pemko’s exclusive polyurethane-coated 4, 8, or 12 TRI-FLEX titanium copper alloy cables. Each cable is capable of carrying 6 amps continuous or 16 amps in-rush @ 24-volts for 820 milliseconds.. When ordering, please use the “shorthand code.” For example, if you require a Clear Anodized heavy-duty Full-Mortise hinge at 83" with Quick Connect transfer - 4-wire, modified 361/4" from the top, right hand, you would order a CFM83HD1 x QC4 @ 361/4" - RH. Serviceable/Removable (SER) Module: The hinge is furnished to be installed in three sections allowing the current carrying cable to be serviced or replaced without removing the door from the frame. Additionally, the SER option allows the current carrying cables to be safely stored or delivered to the electrician or security contractor prior to the installation of the electrified hardware, eliminating the necessity of the electrician or security contractor being present when the doors are being hung. Full-Mortise Hinges - Standard

Full-Mortise Hinges - Short Leaf Flush/Inset

™ ;jaa"Bdgi^hZjc^ihVgZYZh^\cZYbV^can[dgcZlYddg applications and are applied to conceal both leaves

™ 9Zh^\cZY[dgjhZl^i]Yddghl]^X]gVc\ZWZilZZc&3/4" to 21/4"

Standard

Short Leaf Flush

27 (21.4)

_FM_

(21.4)

AVAILABLE FINISHES: BL, C, D, G, PW, SN

Full Mortise

Short Leaf Flush

27 (21.4)

27 (21.4)

XM_

XF_

AVAILABLE FINISHES: C, D

AVAILABLE FINISHES: C, D,

27

X25M_

27

_FM_SLF

AVAILABLE FINISHES: BL, C, D, G, PW, SN

Full Mortise

™ 9Zh^\cZY[dgW^[daYVeea^XVi^dchid`ZZei]Z[VXZhd[i]ZYddgh[ajh]

32

Short Leaf Inset

(21.4)

23

32

(18.3)

XI_ AVAILABLE FINISHES: C, D,

AVAILABLE FINISHES: C, D 2 17 32

212

(64.3)

(63.5)

3

8

(9.5)

MIN

AVAILABLE FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see FULL LINE CATALOG or WEBSITE for finish chart) C (Clear Anodized) D (Dark Bronze Anodized) G (Gold Anodized) SN (Satin Nickel Anodized) BL (Black Anodized) and PW (Painted White) are special finishes available upon request.

800-824-3018 | www.pemko.com Check the web site for the up-to-date catalog Copyright © 2012-2017 Pemko Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Pemko Manufacturing Company is prohibited.

3

Pemko Condensed Catalog

PemkoHinge® Continuous Geared Hinges (Cont.) Full-Mortise Hinges - Wide Throw ™ L^YZI]gdl;jaa"Bdgi^hZjc^ihVgZYZh^\cZYbV^can[dg new door applications that require extra clearance due to special frame, door or wall design, and are applied to conceal both leaves ™ BdgZXaZVgVcXZWZilZZci]ZYddgVcY[gVbZVaadlhndjg door to open 180° ™ 6kV^aVWaZdcan^c]ZVknYjinidhjeedgiaVg\ZgYddgh

Half-Surface Hinges - Standard ™ =Va["Hjg[VXZjc^ihVgZYZh^\cZYbV^can[dggZigd[^ildg` and are applied to the exposed surface of the door and the frame rabbet ™ 9Zh^\cZY[dgjhZl^i]]daadlbZiVa[gVbZh!l]ZgZi]Z inset conforms to S.D.I. specifications for aligning doors and frames ™ 9Zh^\cZY[dggZigd[^iVeea^XVi^dch#6aadlh[dgVY_jhibZcih in order to properly align edge of the door to the frame

Wide Throw

Half Surface

25

32

(19.8)

WT_FM_

_HS_

AVAILABLE FINISHES: C, D, G

AVAILABLE FINISHES: BL, C, D, G, PW, SN

158 (41.3)

JAMB

25

32

(19.8)

23

32

(18.3)

11

32

(8.7)

2

JAMB

(50.8)

DOOR 1 11 16

134

(42.9)

1

(44.5)

8

(3.2)

DOOR

MIN

5/16 SQUARE EDGE DOOR 3/8 BEVELED EDGE DOOR

Full-Surface Hinges - Standard

Full-Surface Hinges - Center Pivot

™ ;jaa"Hjg[VXZjc^ihVgZYZh^\cZYbV^can[dggZigd[^ildg` and are applied to the exposed surfaces of the door and frame

™ ; jaa"Hjg[VXZ8ZciZgE^kdijc^ihVgZYZh^\cZYbV^can[dg retrofit work and are applied to the exposed surfaces of the door and frame ™ ; jaa"Hjg[VXZ8ZciZgE^kdijc^ihZVh^angZeaVXZWjii]^c\Zh since no door or frame adjustments are necessary and are more versatile with restricted frame faces

Full Surface

Center Pivot

_FS_

_FS_CP

AVAILABLE FINISHES: BL, C, D, G, PW, SN

AVAILABLE FINISHES: BL, C, D, G, PW, SN

Full-Surface Hinges - Balanced Pivot ™ Allows for easy replacement from butt hinges as the pivot point remains the same

™ Equal length leaves provide an aesthetic appearance ™ Good in a bi-fold application where two doors need to be hinged

™ No template adjustments are needed for existing door opening/closing devices 25

Full Surface _FS_BP AVAILABLE FINISHES: BL, C, D, PW, SN

32

(19.8)

13

16

(20.6)

1 7 16

1 7 16

(36.5)

(36.5)

2

2

(50.8)

(50.8)

JAMB 1

16

(1.6)

MIN

DOOR

AVAILABLE FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see FULL LINE CATALOG or WEBSITE for finish chart) C (Clear Anodized) D (Dark Bronze Anodized) G (Gold Anodized) BL (Black Anodized) PW (Painted White) and SN (Satin Nickel Anodized) are special finishes available upon request.

800-824-3018 | www.pemko.com Check the web site for the up-to-date catalog

4

Copyright © 2012-2017 Pemko Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Pemko Manufacturing Company is prohibited.

Why Continuous Hinges? Did you know that on a door with traditional butt hinges, 70% of the door weight is on the top hinge? The top hinge also bears the brunt of abuse when doors are opened beyond the stop device, resulting in kickback shock and eventual failure of the hinge and damage to the frame. This is why continuous hinges are recommended for heavy doors and for situations where doors are exposed to misuse.

Most door and frame stress is put on the top of conventional hinge systems.

A continuous hinge spreads the stress along the full length of the door and frame.

Continuous hinges reduce the factors leading to hinge failure by distributing weight evenly so wear and tear to the frame and door is reduced significantly. In addition, continuous hinges:  ™ > cXgZVhZhZXjg^inVcYgZYjXZkVcYVa^hbWnegZkZci^c\^chZgi^dcd[YZk^XZh between the door and frame  ™ : VhZ^chiVaaVi^dcWnegdk^Y^c\h^beaZVa^\cbZcid[ZaZXig^XVaigVch[ZghVcYd[ monitoring switches  ™ G  ZYjXZhV^g^c[^aigVi^dcWnXgZVi^c\VXdbeaZiZhZVa[gdbideidWdiidbd[i]Z door at the hinge jamb There are over 75 different Markar hinge models to choose from offering a variety of configurations, options, and materials.

Markar FM3500 Edge Mount Security Hinge This edge mount pin and barrel type hinge is fabricated with extra-heavy duty components for use on high traffic, high abuse doors. The hinge is specially designed and well suited for correctional facilities and other high security locations using up to 21/4" thick swing-type doors. Prison doors, gates, extremely tall doors and extra heavy doors are all good candidates for Markar’s 3500 Security Hinge.

3/8 10

3/4 19

3/4 19 1/2 13

1/2 13

5/16" 8 MIN. HINGE CLEARANCE

1 15/16 49

1/16 2

CLOSED

7/8 22

1 3/4 44

Door Closed

Door Open 180° OPEN 180

Markar FM300 Edge Mount Hinge This edge-mounted pin & barrel hinge is used on many of today’s high traffic, high abuse doors. The hinge works well in locations that would normally call out for anchor hinges, pivot reinforcement hinges or thrust pivot unit and hinge sets. This hinge saves on special door and frame preparation charges and makes the installer’s job easier. It can be used on both fire labeled and non-labeled openings.

3/8 10

7/8 22

3/4 19

3/4 19

1 3/4 44

1/2 13

1/2 13

1 15/16 49

1/16 2

1/4 6 MIN. HINGE CLEARANCE

Door Closed

Door Open 180°

Markar HG3505 Adjustable Hinge Guard The integral hinge guard protects the door from dings and gouges from carts and gurneys while providing clean lines and aesthetic appearance. Our HG products also have fire ratings up to and including 3 hours.

5/8 16

3/4 19

3/4 19

1/2 13

1/2 13 5/16 8 MIN. HINGE CLEARANCE (NON-ADJUSTABLE)

1 3/4 44 1 1/4 32

1/16 2 1 15/16 49

13/16 21

Door Closed

Door Open 180°

800-824-3018 | www.pemko.com Check the web site for the up-to-date catalog Copyright © 2012-2017 Pemko Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Pemko Manufacturing Company is prohibited.

5

Pemko Condensed Catalog

Markar Continuous Hinges

Pemko Condensed Catalog

Markar Continuous Hinges (Cont.) Markar HG305 Adjustable Hinge Guard The integral hinge guard protects the door from dings and gouges from carts and gurneys while providing clean lines and aesthetic appearance. Our HG products also have fire ratings up to and including 3 hours. Not only that, but the wraparound edge guard protects the door from unsightly dents and gouges and will deflect objects, preventing further damage.

13/16 20

3/8 10

3/4 19

3/4 19 1/2 13

1/2 13 5/16 8 MIN. HINGE CLEARANCE (NON-ADJUSTABLE)

1 3/4 44

1 15/16 49

1/16 2

3/4 18

Door Closed

Door Open 180°

Markar EG308 Adjustable Edge Guard This fire-labeled edge guard is used in conjunction with the HG305 Hinge/Guard for a balanced aesthetic look. It also provides protection for the leading edge of the door.

3/4 19

89° 1 3/4 44 7/8 22

89°

1/16 2 MIN. EG CLEARANCE (NON-ADJUSTABLE)

Square edge door

Markar FM900 Edge Mount Ideal for damp or corrosive environments, Markar’s stainless steel toilet partition hinge adds years of life to your high-quality partition.

1/2 13

3/4 19

3/4 19 1/2 13

1 3/4 44

1/2 13

1/4 6 MIN. HINGE CLEARANCE

2 3/8 60

Door Closed

Door Open 90°

800-824-3018 | www.pemko.com Check the web site for the up-to-date catalog

6

Copyright © 2012-2017 Pemko Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Pemko Manufacturing Company is prohibited.

Pemko Condensed Catalog

Commercial Thresholds Half Saddle Thresholds ™See full line catalog or website for full half saddle product offering

274_ AVAILABLE FINISHES: A, B, D, G ANSI (aluminum): J33100, J33130, J33133 ANSI (brass): J13100, J13130, J13133

2755_ AVAILABLE FINISHES: A, D, G ANSI (aluminum): J33100

1

4

(6.4)

253_ AVAILABLE FINISHES: A, B, D, G ANSI (aluminum): J33100, J33130 ANSI (brass): J13100, J13130

2555_ AVAILABLE FINISHES: A, D, G ANSI (aluminum): J33100

1

* 2555_ can be combined with other half saddles on one or both sides. If combined only on one side, the opposite side should be mounted flush with an existing offset. Either stated application is required for this to be ADA-compliant.

2

(12.7)

5

(127.0)

566_ AVAILABLE FINISHES: A, D ANSI (aluminum): J33100, J33130 s/FFSET(ALF3ADDLE

1

(25.4)

3

(76.2)

766_ AVAILABLE FINISHES: A, D ANSI (aluminum): J33100, J33130 s/FFSET(ALF3ADDLE

1

2

(12.7)

3

(76.2)

Offset Saddles 158_ AVAILABLE FINISHES: A, D, G ANSI (aluminum): J32100, J32130, J32138, J32180

1571_ AVAILABLE FINISHES: A, D ANSI (aluminum): J32100, J32180, J33100

1

(25.4)

3

1 4

4

(6.4)

(19.1)

614

(158.8)

AVAILABLE FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see FULL LINE CATALOG or WEBSITE for finish chart) A (Mill Finished Aluminum) B (Mill Finish Architectural Bronze [Brass]) D (Dark Bronze Anodized) G (Gold Anodized) BL (Black Anodized) and PW (Painted White) are special finishes available upon request.

800-824-3018 | www.pemko.com Check the web site for the up-to-date catalog Copyright © 2012-2017 Pemko Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Pemko Manufacturing Company is prohibited.

7

Pemko Condensed Catalog

Commercial Thresholds (Cont.) ™Unless exact net cut is specified, thresholds less than 48" are supplied 1/2" over length, and thresholds 48" and over are supplied 1" over length to allow for fitting. ™Unless otherwise specified, all thresholds are pre-drilled on the center line and are supplied with fasteners. Thresholds 8" in width or greater are supplied with two rows of fastener holes. ™For corrosive environments, stainless steel screws are available at an extra cost. ™Available with PemKote® non-skid coating. Please specify PemKote™ when ordering. Please furnish drilling instructions when ordering with PemKote™ as it is difficult to drill through.

Saddle Thresholds 171_ AVAILABLE FINISHES: A, B, BDG, D, G, SN

172_ AVAILABLE FINISHES: A, B, D, G, SN

176_ AVAILABLE FINISHES: A, B, D, G

270_ AVAILABLE FINISHES: A, B, D, G

271_ AVAILABLE FINISHES: A, B, D, G, SN

272_ AVAILABLE FINISHES: A, B, D, G, SN

2548_ AVAILABLE FINISHES: A, D, G

2748_ AVAILABLE FINISHES: A, D, G

2749_ AVAILABLE FINISHES: A, D, G

AVAILABLE FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see FULL LINE CATALOG or WEBSITE for finish chart) A (Mill Finished Aluminum) B (Mill Finish Architectural Bronze [Brass]) BDG (Bright Dip Gold Anodized) D (Dark Bronze Anodized) G (Gold Anodized) SN (Satin Nickel Anodized) BL (Black Anodized) and PW (Painted White) are special finishes available upon request.

800-824-3018 | www.pemko.com Check the web site for the up-to-date catalog

8

Copyright © 2012-2017 Pemko Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Pemko Manufacturing Company is prohibited.

Pemko Condensed Catalog

Commercial Thresholds (Cont.) Stainless Steel Saddle Thresholds ™ &&\V)(%HiV^caZhhHiZZal^i])7gjh]ZY;^c^h] ™ HiV^caZhhHiZZaI]gZh]daYhVgZVkV^aVWaZ^c(+!)-!,'!.+VcY&'%aZc\i]hdcan#

154SS AVAILABLE FINISHES: SS (#4 Finish)

175SS AVAILABLE FINISHES: SS (#4 Finish)

253SSFG AVAILABLE FINISHES: SS (#4 Finish)

1

2

(12.7)

3 1 16 (77.8)

252x3SSFG AVAILABLE FINISHES: SS (#4 Finish)

1

2

(12.7)

5

(127.0)

Heavy Duty Thresholds ™Ideal for heavy-duty, high-traffic and high weight-bearing applications, such as industrial facilities, schools, cafeterias, manufacturing buildings and hospitals ™Withstands coastal and high-humidity conditions ™Ultra-durable, extra thick extruded nickel-aluminum construction is guaranteed for ten (10) years

1715_ AVAILABLE FINISHES: A, AK, D

2715_ AVAILABLE FINISHES: A, AK, D

1

4

(6.4)

5

(127.0)

Modular Heavy Duty Thresholds ™Modular construction without the expense of custom cast thresholds. ™Available in incremental width additions to accommodate a variety of applications (in 1" increments)

1717_ AVAILABLE FINISHES: A, AK, D Allow 5/8" door clearance.

All items on this page are available with PemKote™ non-slip coating (see General Information section). Please specify “PemKote™” when ordering. Please furnish drilling instructions when ordering PemKote™ as it is difficult to drill through this coating.

1718_ AVAILABLE FINISHES: A, AK, D Allow 5/8" door clearance. AVAILABLE FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see FULL LINE CATALOG or WEBSITE for finish chart) A (Mill Finish Aluminum), AK (Pemkote Aluminum), D (Dark Bronze Anodized), SS (see individual part)

800-824-3018 | www.pemko.com Check the web site for the up-to-date catalog Copyright © 2012-2017 Pemko Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Pemko Manufacturing Company is prohibited.

9

Pemko Condensed Catalog

Commercial Thresholds (Cont.) Thermal Barrier Saddles Black rigid polypropylene key between extrusions provides a thermal barrier (designated by “FG” Frost Guard following finish code)

273x3_FG AVAILABLE FINISHES: A, B, D, G

273x4_FG AVAILABLE FINISHES: A, B, D, G

254x4_FG AVAILABLE FINISHES: A, B, D, G

255x5_FG AVAILABLE FINISHES: A, B, D, G

252x2_FG AVAILABLE FINISHES: A, B, D, G

252x3_FG AVAILABLE FINISHES: A, B, D, G

253x4_FG AVAILABLE FINISHES: A, B, D, G

Flexible Threshold ™;aZm^WaZEZb`dEgZcZ® joint allows threshold to bend up to 20-degrees in either direction ™?d^ciYZh^\cVaadlh[dgl^Yi]idZmiZcYjeid&$) ™9Zh^\cZY[dgVkVg^Zind[Veea^XVi^dch^#Z#gVbe!ZmeVch^dc_d^ciXdkZg!ZiX 10 1 4

573x5_FG AVAILABLE FINISHES: A, D

1

(260.4)

4

(6.4)

0-

1

4

(6.4)

Flexible Joint

AVAILABLE FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see FULL LINE CATALOG or WEBSITE for finish chart) A (Mill Finish Aluminum), B (Mill Finish Bronze [Brass]), D (Dark Bronze Anodized), G (Gold Anodized)

800-824-3018 | www.pemko.com Check the web site for the up-to-date catalog

10

Copyright © 2012-2017 Pemko Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Pemko Manufacturing Company is prohibited.

Pemko Condensed Catalog

Commercial Thresholds (Cont.) Latching Panic Exit Saddle Thresholds ™Used in conjunction with surface applied vertical rod exit device, or as a stop and a seal at the bottom of a door. ™Also available with Eco-V® or Pile Seals; test ratings vary. Please see full line catalog or web.

2005_T AVAILABLE FINISHES: A, B, D, G Allow 3/8" door clearance.

2006_T OFFSET

AVAILABLE FINISHES: A, D, G Allow 3/8" door clearance. ADA compliant when butted to another flooring surface 1/4" or higher.

179_T AVAILABLE FINISHES: A, B, D, G Allow 1/2" door clearance. 1

2009_PK AVAILABLE FINISHES: A, D Allow 3/8" door clearance.

158

2

(41.3)

(12.7)

PemkoPrene ® (PK) 1

1

4

2

(12.7)

(6.4)

Latching Panic Exit Saddle Thresholds - Thermal Barrier ™Black rigid polypropylene key between extrusions provides thermal barrier (designated by “FG” Frost Guard following finish code) ™Used in conjunction with surface-applied vertical rod exit device, or as a stop and a seal at the bottom of door ™These units are not welded

252x226_FGT AVAILABLE FINISHES: A, B, D, G Allow 5/8" door clearance.

254x226_FGT

ALTERNATE INSERTS

AVAILABLE FINISHES: A, B, D, G Allow 5/8" door clearance.

252x226_FGP 254x226_FGP 273x224_FGT

273x224_FGT

252x226_FGV 254x226_FGV 273x224_FGT

AVAILABLE FINISHES: A, D, G

279x292_FGPK AVAILABLE FINISHES: A, D

1

2

(12.7)

15 8

(41.3)

PemkoPrene ® (PK) 1

Eco-V ™

1

2

(12.7)

4

(6.4)

41 4

(108.0)

AVAILABLE FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see FULL LINE CATALOG or WEBSITE for finish chart) A (Mill Finish Aluminum) B (Mill Finish Extruded Bronze [Brass]) D (Dark Bronze Anodized) G (Gold Anodized) NOTE: G is available with limited inventory

800-824-3018 | www.pemko.com Check the web site for the up-to-date catalog Copyright © 2012-2017 Pemko Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Pemko Manufacturing Company is prohibited.

11

Pemko Condensed Catalog

Commercial Thresholds (Cont.) Eco-V® Thresholds ™ Eco-V® thresholds create an ideal transition where two different pieces of carpet meet or carpet meets another surface under a door ™ Ideal for use in any high-traffic commercial installation, such as hotels and offices ™ Eco-V® thresholds are manufactured of slightly softer material than competitive products. This aids in the cutting and fitting of the threshold and facilitates easier insertion of the carpet into the holding cavities on the carpet side(s) of the threshold ™ Eco-V® thresholds are designed to work in conjunction with Pemko's 2173_V and 2343_V door shoes ™ :V232_, EV2325_ and ADJ232V thresholds have been tested and approved under ADAAG-2010 (Amended); ICC/ANSI A117.1 and California Building Code, Title 24 for Barrier-Free Entry

EV232__ AVAILABLE COLORS: BL, D AVAILABLE LENGTHS: 36", 48", 73"

Serves as a transition where two pieces of carpet meet beneath an interior door.

EV2320_ AVAILABLE COLORS: BL AVAILABLE LENGTHS: 36", 48", 73"

Serves as a transition where carpet meets concrete beneath an interior or exterior door.

EV2325_ AVAILABLE COLORS: BL, D AVAILABLE LENGTHS: 36", 48", 73"

Serves as a transition where carpet meets tile beneath an interior door.

EV2322_ AVAILABLE COLORS: BL AVAILABLE LENGTHS: 36", 48", 73"

Serves as a transition where carpet meets tile beneath an interior door.

Adjustable Assembly Thresholds ADJ232V8_ AVAILABLE FINISHES: BL, D AVAILABLE LENGTHS: 36", 48", 73"

AVAILABLE FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see FULL LINE CATALOG or WEBSITE for finish chart) BL (Black) D (Dark Brown)

800-824-3018 | www.pemko.com Check the web site for the up-to-date catalog

12

Copyright © 2012-2017 Pemko Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Pemko Manufacturing Company is prohibited.

Pemko Condensed Catalog

Modular Ramps

How To Order

™Assemblies accommodate 1/2" to 21/4" floor offsets in meeting the 1:12 slope requirements of the “Americans with Disabilities Act”. Even higher offsets can be accommodated by using the risers, RAMP13_ and RAMP14_ ™“MR” in a product number denotes that one-pair of miter returns (and one-pair of miter return extenders, if applicable) are included. Otherwise, we recommend filling and feathering the threshold ends with grout. Do not leave threshold ends open ™Miter Returns are available for offsets up to 21/4". Larger offsets will require filling with additional material (not supplied) at the points where the offset is larger than 21/4". ™Assemblies are supplied with #10 stainless steel wood screws. Stainless steel machine screws and expansion shields are available at an extra cost ™Assemblies allow for custom fabrication (i.e. notching); please consult Pemko Customer Service ™Assemblies are provided NET length

Modular Ramp Threshold Assemblies - Flush Applications R1F_ R1FMR_ AVAILABLE FINISHES: A, AK

Modular Ramp Threshold Assemblies Offset Applications (7" Top Plate) R.5OS_ R.5OSMR_ AVAILABLE FINISHES: A, AK

Modular Ramp Threshold Assemblies Offset Applications (31/2" Top Plate) R.75OSS_ R.75OSSMR_ AVAILABLE FINISHES: A, AK

Recycled Rubber Ramp Assembly PART #

WIDTH “A” (door opening)

WIDTH “A”

WIDTH “B” (total width)

RR1.25FMR36

36"

41"

RR1.25FMR48

48"

53"

RR1.25FMR60

60"

65"

RR1.25FMR72

72"

77"

RR1.25FMR96

WIDTH “B”

96"

101"

12”

1

12

1 14 ” (31.8)

22°

WIDTH “B” WIDTH “A”

R.1/4

AVAILABLE FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see FULL LINE CATALOG or WEBSITE for finish chart) A (Mill Finish Aluminum) AK (Mill Finish Aluminum with Pemkote™ Non-Slip Coating)

800-824-3018 | www.pemko.com Check the web site for the up-to-date catalog Copyright © 2012-2017 Pemko Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Pemko Manufacturing Company is prohibited.

13

Pemko Condensed Catalog

Door Bottoms Automatic Door Bottoms ™Self-leveling design; drop leads on plunger side and then levels out across its length across door length ™6Y_jhihWZilZZc1/8" and 3/4". Maximum dimension between door bottom rail and floor surface is 3/4".

4131_RL

4131_NBL

4301_RL

AVAILABLE FINISHES: BDG, C, D, SN

AVAILABLE FINISHES: BDG, C, D, SN

AVAILABLE FINISHES: C, D

SURFACE MOUNTED

SURFACE MOUNTED

SEMIMORTISED

SEMIMORTISED

SURFACE MOUNTED

SEMIMORTISED

1 25 32

1 27 32

1 27 32

(46.0)

(46.8)

(46.8)

29 19

19

(15.1)

32

(15.1)

sponge EPDM (R)

sponge EPDM (R)

nylon brush (NB)

ALTERNATE INSERT FOR 4301

ALTERNATE INSERTS FOR 4131

4301_PKL

4131_PKL

4131_SL

AVAILABLE FINISHES: BDG, C, D, SN

AVAILABLE FINISHES: BDG, C, D, SN

AVAILABLE FINISHES: C, D PemkoPrene (PK)

®

®

4301_NBL

434_NBL

434_RL

AVAILABLE FINISHES: C, D,

AVAILABLE FINISHES: A

AVAILABLE FINISHES: A

SURF ACE MOUNTED

32

(23.8)

32

SEMIMORTISED

27

7

32

1 11 32

1 25 32

(34.13)

(45.2)

nylon brush (NB) 29

8

(22.2)

(21.4)

1 1132 (34.1)

sponge EPDM (R)

32

(23.0)

ALTERNATE INSERT FOR 434 434_PKL

nylon brush (NB)

AVAILABLE FINISH: A PemkoPrene (PK)

®

AVAILABLE FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see FULL LINE CATALOG or WEBSITE for finish chart) A (Mill Finish Aluminum) BDG (Bright Dip Gold Anodized) C (Clear Anodized) D (Dark Bronze Anodized) SN (Satin Nickel Anodized). Special finishes available upon request.

800-824-3018 | www.pemko.com Check the web site for the up-to-date catalog

14

Copyright © 2012-2017 Pemko Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Pemko Manufacturing Company is prohibited.

Pemko Condensed Catalog

Door Bottoms (Cont.) Automatic Door Bottoms ™6Y_jhihWZilZZc1/8" and 3/4". Maximum dimension between door bottom rail and floor surface is 3/4" except where noted.

411_RL

411_NBL

420_PKL

AVAILABLE FINISHES: A

AVAILABLE FINISHES: A

AVAILABLE FINISHES: A For hollow metal doors. Maximum drop is 1/2".

sponge EPDM (R)

nylon brush (NB)

ALTERNATE INSERTS FOR 411 411_PKL

®

ALTERNATE INSERTS FOR 420 420_VL

411_SL Eco-V

®

®

420_SL

Acoustic Automatic Door Bottoms: PDB Series ™ J  c^fjZYZh^\cXgZViZhjc^[dgbhZVaegZhhjgZVXgdhhi]ZZci^gZYddgWdiidbgZhjai^c\^chjeZg^dgVXdjhi^XeZg[dgbVcXZ ™ E97HZg^Zh]VhÆhZVaZY"^c"eaVXZÇineZeZg[dgbVcXZ!VX]^Zk^c\oZgdYZX^WaZYgde^cHI8gVi^c\h^cbVcnine^XValddYVcY hollow metal door applications. ™ JHEViZciCd-!.'*!'*%7' ™ 7VgVY_jhibZci^h&$-id&$'#BVm^bjbY^bZch^dc[gdbWdiidbd[YddgidhZVa^c\hjg[VXZ^h&$'

PDB411_E

PDB4131_E

AVAILABLE FINISHES: A

AVAILABLE FINISHES: C, D

9

16

SURFACE MOUNTED

(14.3)

SEMIMORTISED

138 (34.9)

178 (47.6)

®

PemkoPrene (E) 9

16

(14.3)

®

PemkoPrene (E)

800-824-3018 | www.pemko.com Check the web site for the up-to-date catalog Copyright © 2012-2017 Pemko Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Pemko Manufacturing Company is prohibited.

15

Pemko Condensed Catalog

Door Bottoms (Cont.) Door Shoes ™ L]ZgZYddgWdiidbhVgZcdiZYl^i]Wdi]EZb`dEgZcZ® (PK) and Eco-V® (V) seals, these options have the same profile ™ HadiiZY]daZh[dgZVhnVY_jhibZci ™ GV^cYg^ebdYZa^h^YZVa[dgYZ[aZXi^c\gV^cVlVn[gdbi]ZWdiidbd[Yddg

211_V 211_PK

215_V 215_PK

2251_V 2251_PK

AVAILABLE FINISHES: A, D, G

AVAILABLE FINISHES: A, BDG, D, G, PW, SN

AVAILABLE FINISHES: A, D, G

222_V 222_PK

2211_V 2211_PK

AVAILABLE FINISHES: A, D, G

AVAILABLE FINISHES: A, D, G Combination door shoe and kick plate with rain drip.

225_V 225_PK AVAILABLE FINISHES: A, D, G

1 1316 (46.0)

For hollow metal doors

1 13 16 (46.0)

For hollow metal doors

15 16 (23.8)

15 16 (23.8)

For hollow metal doors with inverted bottom channel. 134

2170_V

2173_V

AVAILABLE COLORS: D, W AVAILABLE LENGTHS: 36", 48" All Vinyl

AVAILABLE FINISHES: A, BDG, D, G, PW

2343_V Also available with unnotched insert: 2343_V36UN 2343_V48UN

234_V 234_PK AVAILABLE FINISHES: A, D, G

1 1 16

15

(27.0)

1 3 16 (30.2)

11

16

(23.8)

Also available with unnotched insert: 2173_V36UN 2173_V48UN

Also available with unnotched insert: 2170_V36UN 2170_V48UN

AVAILABLE FINISHES: A, D, G

(44.5)

11

16

(17.5)

2113_V

2213_PK773

AVAILABLE FINISHES: A, D, G

AVAILABLE FINISHES: A, D, G

1 34

(44.5)

16

(17.5)

9 16

3692_PK773 AVAILABLE FINISHES: A AVAILABLE LENGTHS: 36", 48" 1

8

(3.2)

17

(14.3)

16

(36.5)

9 16 (14.3)

AVAILABLE FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see FULL LINE CATALOG or WEBSITE for finish chart) A (Mill Finish Aluminum) BDG (Bright Dip Gold Anodized) D (Dark Bronze Anodized) G (Gold Anodized) PW (Painted White) SN (Satin Nickel Anodized)

800-824-3018 | www.pemko.com Check the web site for the up-to-date catalog

16

Copyright © 2012-2017 Pemko Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Pemko Manufacturing Company is prohibited.

Pemko Condensed Catalog

Door Bottoms (Cont.) Door Bottom Sweeps 315_N

321_N

3151_N

AVAILABLE FINISHES: B, BGD, C, D, G, PW, SN

AVAILABLE FINISHES: C, D, G

AVAILABLE FINISH: C, D, G

1

(31.8)

1

(25.4)

3452_NB

345_NB

AVAILABLE FINISHES: BDG, C, D, G, PW, SN

AVAILABLE FINISHES: A, BDG, D, G, PW

345_V 345_PK AVAILABLE FINISHES: A, BDG, D, G, PW

Eco-V ®

Astragals and Meeting Stiles Split Astragals and Meeting Stile Gasketing ™ 6  higV\VahVcYbZZi^c\hi^aZhbVnWZbdjciZYdceV^ghd[Yddghl]ZgZ^ci]Z\VebZZihi]ZgZfj^gZbZcihd[C;E6-%!ÆI]Z clearance between the meeting edges of doors swinging in pairs on the pull side shall be 1⁄8" ± 1/16" (3.18mm ± 1.59mm) for steel doors and shall not exceed 1⁄8" (3.18mm) for wood doors.” ™When used as split astragals on double doors, two lengths must be ordered: one for each door ™EjcX]ZYl^i]hadiiZY]daZh[dgVY_jhibZci

303_S

297_S

AVAILABLE FINISHES: A, BDG, C, D, G, PW, SN

AVAILABLE FINISHES: A, BDG, D, G, PW, SN

ALTERNATE INSERTS 297_PK

ALTERNATE INSERTS

297_V ®

29310_S AVAILABLE FINISHES: C, D, G

303_PK Eco-V ®

303_V ®

Eco-V ®

ALTERNATE INSERTS 29310_PK ®

29310_P 29310_V Eco-V ®

A (Mill Finish Aluminum) B (Architectural Bronze [Brass]) BDG (Bright Dip Gold Anodized) C (Clear Anodized) D (Dark Bronze Anodized) G (Gold Anodized) PW (Painted White) SN (Satin Nickel Anodized)

800-824-3018 | www.pemko.com Check the web site for the up-to-date catalog Copyright © 2012-2017 Pemko Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Pemko Manufacturing Company is prohibited.

17

Pemko Condensed Catalog

Astragals and Meeting Stiles (Cont.) 305_N

18041_NB

AVAILABLE FINISHES: B, C, D, G

AVAILABLE FINISHES: C, D, G, SN

EPDM

Pemko offers a broad line of nylon brush weatherstripping including the 18062_NB and 18100_NB, which are suitable for split astragal applications.

313_N

369_P

369_PK

AVAILABLE FINISHES: A, D, G

AVAILABLE FINISHES: A, D, G

AVAILABLE FINISHES: A, D, G

369_S

369_PK773

AVAILABLE FINISHES: A, D, G

AVAILABLE FINISHES: A, D, G

EPDM

13

5

32

(10.3)

13

32

(4.0)

32

(10.3) PemkoPrene™ (PK)

369_P kerfed into meeting stile application

Adjustable Astragals ™When used as split astragals on double doors, two lengths must be ordered: one for each door ™Available in 84", 96" and 120" lengths ™351 is surface applied, a full mortise option is also available NOTE: If you require split astragals in a metal-to-gasket configuration, you must order each leaf separately with your choice of insert.

351_/351_S

ALTERNATE INSERTS

AVAILABLE FINISHES: B, C, D, G

351_P

351_V

351_PK Eco-V ®

®

Overlapping and “T” Astragals 355_S AVAILABLE FINISHES: B, BDG, C, D, G, PW, SN

ALTERNATE INSERTS 355_V Eco-V ®

355_P

357_ with S88_

356_V AVAILABLE FINISHES: A, BDG, D, PW, SN

AVAILABLE FINISHES: SP, SS Eco-V ®

355_PK PemkoPrene™ (PK)

AVAILABLE FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see FULL LINE CATALOG or WEBSITE for finish chart) A (Mill Finish Aluminum) B (Mill Finish Extruded Bronze [Brass]) BDG (Bright Dip Gold Anodized) C (Clear Anodized) D (Dark Bronze Anodized) G (Gold Anodized) PW (Painted White) SN (Satin Nickel Anodized) SP (Galvannealed Steel) SS (Stainless Steel)

800-824-3018 | www.pemko.com Check the web site for the up-to-date catalog

18

Copyright © 2012-2017 Pemko Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Pemko Manufacturing Company is prohibited.

Pemko Condensed Catalog

Brush Gasketing ™All brush seals consist of densely compressed nylon filaments encased in high quality aluminum retainers. These products are ideally suited for hollow metal and wood door (in-door sweep, jamb/header gasketing, and split astragal) applications. Also use Pemko’s brush weatherstripping products on overhead doors, sectional doors, sliding doors, and automatic doors ™All brush seals greatly reduce the infiltration of light, air, wind, rain, and snow; prevent heat loss; control the penetration of smoke and fumes ™Brush remains flexible down to -40°F and has a melting point above 400°F ™UV stabilized, dependable, long-lasting, cost-effective ™Punched with slotted holes for adjustment (except 35° angle types which are drilled with 1⁄8" hole)

45° Aluminum Retainers 45041_NB

45061_NB

45062_NB

AVAILABLE FINISHES: C, D, G, PW

AVAILABLE FINISHES: C, D, G, PW

AVAILABLE FINISHES: C, D, G, PW

45100_NB

45175_NB

45250_NB

AVAILABLE FINISHES: C, D, G, PW

AVAILABLE FINISHES: C, D, G

AVAILABLE FINISHES: C, D, G

35° Aluminum Retainers 35041_NB

35061_NB

AVAILABLE FINISHES: C, D

AVAILABLE FINISHES: C, D

AVAILABLE FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see FULL LINE CATALOG or WEBSITE for finish chart) C (Clear Anodized) D (Dark Bronze Anodized) G (Gold Anodized) PW (Painted White)

800-824-3018 | www.pemko.com Check the web site for the up-to-date catalog Copyright © 2012-2017 Pemko Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Pemko Manufacturing Company is prohibited.

19

Pemko Condensed Catalog

Brush Gasketing (Cont.) 180° Aluminum Retainers 18400_NB

18250_NB

18175_NB

18100_NB

AVAILABLE FINISHES: C, D, G

AVAILABLE FINISHES: C, D, G

AVAILABLE FINISHES: C, D, G

AVAILABLE FINISHES: C, D, G, PW

18062_NB

18061_NB

18041_NB

AVAILABLE FINISHES: C, D, G, PW

AVAILABLE FINISHES: C, D, G, SN

AVAILABLE FINISHES: C, D, G, SN

Mortise Retainers

180° Concealed Fastener Retainers

5061_NB

5025_SB

293100_NB

29324_NB

AVAILABLE FINISHES: A

AVAILABLE FINISHES: A

AVAILABLE FINISHES: C, D

AVAILABLE FINISHES: C, D, G

AVAILABLE FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see FULL LINE CATALOG or WEBSITE for finish chart) A (Mill Finish Aluminum) C (Clear Anodized) D (Dark Bronze Anodized) G (Gold Anodized) PW (Painted White) SN (Satin Nickel Anodized)

800-824-3018 | www.pemko.com Check the web site for the up-to-date catalog

20

Copyright © 2012-2017 Pemko Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Pemko Manufacturing Company is prohibited.

Pemko Condensed Catalog

Perimeter Gasketing Adjustable Jamb Weatherstrip 379_S

322_SPK

AVAILABLE FINISHES: C, D, G ADDITIONAL INSERTS: PK, R

AVAILABLE FINISHES: C, D, G

13

PemkoPrene® (PK)

16

(20.6)

1 5 16 (33.3)

350_SR

350_SPK

AVAILABLE FINISHES: C, D, G

AVAILABLE FINISHES: C, D, G

13

sponge EPDM (R)

16

13

PemkoPrene® (PK)

(20.6)

16

(20.6)

1 5 16

1 5 16

(33.3)

(33.3)

Standard Perimeter Gasketing 303_S

ALTERNATE INSERTS

AVAILABLE FINISHES: A, BDG, C, D, G, PW, SN

303_PK

303_V Eco-V ®

®

Note: Alternate Inserts May Carry Different Ratings. See Full Line Catalog Or Website For More Information.

29310_S

297_S

AVAILABLE FINISHES: C, D, G ADDITIONAL INSERTS: V, P, PK

AVAILABLE FINISHES: A, BDG, D, G, PW, SN

312_R

306_V

AVAILABLE FINISHES: C, D, G

AVAILABLE FINISHES: A, BDG, D, G, PW, SN

1

4

(6.4)

1

Eco-V ®

4

(6.4)

3

4

(19.1)

AVAILABLE FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see FULL LINE CATALOG or WEBSITE for finish chart) A (Mill Finish Aluminum) BDG (Bright Dip Gold Anodized) C (Clear Anodized) D (Dark Bronze Anodized) G (Gold Anodized) PW (Painted White) SN (Satin Nickel Anodized)

800-824-3018 | www.pemko.com Check the web site for the up-to-date catalog Copyright © 2012-2017 Pemko Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Pemko Manufacturing Company is prohibited.

21

Pemko Condensed Catalog

Perimeter Gasketing (Cont.) Heavy Duty -Standard Jamb All gasketing shown below is sold individually

290_PK

29045_NB

AVAILABLE FINISHES: A, D, G

AVAILABLE FINISHES: A, D, G

2902_V

2903_V

AVAILABLE FINISHES: A, D, G

AVAILABLE FINISHES: A, D, G

Eco-V ®

Eco-V®

Solid Sections for Hardware Mounting -Head Section All gasketing shown below is sold individually

2891_S

2893_V

AVAILABLE FINISHES: A, D, G ADDITIONAL INSERTS: V, PK

AVAILABLE FINISHES: A, D

2892_V

28945_NB

AVAILABLE FINISHES: A, D

AVAILABLE FINISHES: A, D, G

Eco-V®

1

Eco-V®

4

(6.4)

112 (38.1)

Acoustic Corner Pad ACP112_ AVAILABLE COLORS: BL, W

Note: Alternate Inserts May Carry Different Ratings. See Full Line Catalog Or Website For More Information.

AVAILABLE FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see FULL LINE CATALOG or WEBSITE for finish chart) A (Mill Finish Aluminum) D (Dark Bronze Anodized) G (Gold Anodized) Corner Pads: BL (Black) W (White)

800-824-3018 | www.pemko.com Check the web site for the up-to-date catalog

22

Copyright © 2012-2017 Pemko Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Pemko Manufacturing Company is prohibited.

Pemko Condensed Catalog

Adhesive Gasketing MicroShield® Antimicrobial Gasketing ™ :migjYZY[gdb]^\]"iZbeZgVijgZh^a^XdcZl^i] MicroShield®, a silver-based antimicrobial additive ™ :[[ZXi^kZWZilZZc"*-°;VcY)*%°; ™ 6Y]Zh^kZ7VX`ZY

™ HZa["Zmi^c\j^h]^c\VcYcdc"idm^X ™ JcV[[ZXiZYWnhjca^\]i!dodcZVcYjaigVk^daZigVnh ™ :mXZZYhi]ZgZfj^gZbZcih[dg6ci^b^XgdW^Va Test JIS-Z-2801

AM44_

AM88_

AVAILABLE FINISHES: BL, C, D, W AVAILABLE LENGTHS: 17', 18', 20', 21', 25', 30', 250', 510'

AVAILABLE FINISHES: BL, C, D, W AVAILABLE LENGTHS: 17', 18', 20', 21', 25', 30', 250', 510'

MicroShield® As part of their promise to provide innovative solutions to their customers, certain ASSA ABLOY Group brands offer the MicroShield® technology, a silver-based antimicrobial additive designed to inhibit the growth of bacteria. MicroShield® is a registered trademark of Yale Security Inc., an ASSA ABLOY Group company.

SiliconSeal™ - Adhesive Backed Fire/Smoke Gasketing ™ H))^hYZh^\cZY[dgi^\]iZg[gVbZhVcYYZbdchigViZhZmigZbZanadlXadh^c\[dgXZ ™ H))VcYH--VgZVkV^aVWaZl^i]eZg[dgVi^dchVadc\aZc\i][dgWZ]Vk^dgVa]ZVai]Veea^XVi^dch

S44_

S77_

AVAILABLE FINISHES: BL, C, D, GR, W AVAILABLE LENGTHS: 17', 18', 20', 21', 25', 30', 204', 510'

AVAILABLE FINISHES: BL, C, D, W AVAILABLE LENGTHS: 17', 18', 20', 21', 25', 30', 204', 510'

S88_

S773_

AVAILABLE FINISHES: BL, C, D, GR, TAN, W AVAILABLE LENGTHS: 17', 18', 20', 21', 25', 30', 204', 510'

AVAILABLE FINISHES: BL, D, GR, W AVAILABLE LENGTHS: 17', 18', 20', 21', 25', 30', 250', 500'

Notes For All Adhesive Gasketing:

S776_ AVAILABLE FINISHES: BL AVAILABLE LENGTHS: 17', 18', 20', 21' ™9Zh^\cZY[dg]daadlbZiVaVcYlddYbZZi^c\hi^aZ applications ™HZVaWZ\^chXdbegZhh^c\Vi3/8"; compresses to seal up to a 1/16" gap 1

4

3

”

8

”

(9.5)

(6.4)

1”

(25.4)

Storage and shelf life: All adhesive gaskets have a limited shelf life. This product must be installed within 6 months of purchase and must be stored between 50ºF and 100ºF. Before installing: Thoroughly clean the frame to remove grease, dust or cleanser build-up (cleansing towelettes are included with product). Painted frame surface must be completely dry. Some hospital environments have wax or anti-bacterial cleanser build-up. As an alternative or substitute cleanser, use isopropyl (rubbing) alcohol. Note: Mineral spirits or other petroleum based cleaning products should NOT be used.

AVAILABLE FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see FULL LINE CATALOG or WEBSITE for finish chart) BL (Black) C (Clear) D (Dark) GR (Gray) TAN (Tan) W (White)

800-824-3018 | www.pemko.com Check the web site for the up-to-date catalog Copyright © 2012-2017 Pemko Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Pemko Manufacturing Company is prohibited.

23

Pemko Condensed Catalog

Adhesive Gasketing (Cont.) PemkoPrene® - Adhesive Backed Fire/Smoke Gasketing PK33_

PK55_

AVAILABLE FINISHES: BL, D, W AVAILABLE LENGTHS: 17', 18', 20', 21', 25', 30', 510'

AVAILABLE FINISHES: BL, D, W AVAILABLE LENGTHS: 17', 18', 20', 21', 25', 30', 510'

Hot Smoke Seal Edge Sealing for Category B Doors HSS1000_ is a non-adhesive backed (mortise applied) intumescent

HSS1000_

HSS2000_

AVAILABLE FINISHES: Graphite (no code), W AVAILABLE LENGTHS: 7', 8', 10', 18', 21', 24'

AVAILABLE FINISHES: Graphite (no code), W AVAILABLE LENGTHS: 7', 8', 10', 18', 21', 24'

Hot Smoke Seal/SiliconSeal Combination Fire/Smoke Gasketing ™Material is supplied in three lengths: one for each jamb and one for the header. When ordering, order by door size (i.e. 3684 or 3/0x7/0) as some lengths can be supplied in more than one opening size combination.

HSS2000xS44__

HSS2000xS88_

AVAILABLE FINISHES: BL, C, D, GR, W AVAILABLE LENGTHS: 18’, 20’, 21’, 24’

AVAILABLE FINISHES: BL, C, D, GR, TAN, W AVAILABLE LENGTHS: 18’, 20’, 21’, 24’

Adhesive Astragal/Meeting Stile Seals S771_

S772_

S771x6_

AVAILABLE FINISHES: BL, C, D, GR, W AVAILABLE LENGTHS: 7', 8', 9', 10'

AVAILABLE FINISHES: BL, C, D, GR, W AVAILABLE LENGTHS: 7', 8', 9', 10'

AVAILABLE FINISHES: BL, C AVAILABLE LENGTHS: 7', 8', 9', 10'

Hospitality Products Privacy Door Latch Bracket

AVAILABLE COLORS: Blank (Galvanized Steel), 10B (Dark Brown)

1

Privacy Door Latch

™For use on Dunbartan, Reddiframe, and Timely Frames ™Available in a paint-grade galvanized steel or a US10B finish

PDLBRKT_

™ Seal begins compressing at 5/16"; compresses to seal up to a 1/16" gap

5

8

”

(41.3)

™Easy to install, simple to operate ™ADA compliant ™Enhanced room privacy ™UL classified as a fire door accessory

87°

2

3

”

16

(55.6)

1

1

2

”

(38.1)

PDL_ AVAILABLE FINISHES: 3 (Polished Brass) 4 (Satin Brass) 10B (Dark Bronze) 26 (Polished Chrome) 26D/15 (Dull Chrome/Satin Nickel) AVAILABLE FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see FULL LINE CATALOG or WEBSITE for finish chart) Gasketing: BL (Black) C (Clear) D (Dark Brown) GR (Gray) TAN (Tan) W (White)

800-824-3018 | www.pemko.com Check the web site for the up-to-date catalog

24

Copyright © 2012-2017 Pemko Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Pemko Manufacturing Company is prohibited.

Pemko Condensed Catalog

Acoustic Seal Sets PEMKO supplies the appropriate acoustic components in sets. These product combinations are lab tested and have known decibel drops when used with sound-rated doors. Each kit includes gasketing, a door bottom or threshold, and a complete set of installation InstructIons. Installation instructions show the proper installation location for each component for optimal performance. Item Number

Gasketing

Door Bottom

Threshold

PEMKOSTCSET-1A

S773BL (Single Row) and S44BL (Single Row)

PDB411AE

ACP112BL

PEMKOSTCSET-1B

S44BL (Two Rows)

PDB411AE

ACP112BL

PEMKOSTCSET-1C

S442BL (Single Row) and S44BL (Single Row)

PDB411AE

ACP112BL

PEMKOSTCSET-1D

303AS and S44BL (Single Row)

PDB411AE

ACP112BL

PEMKOSTCSET-1E

312CR and S44BL (Single Row)

PDB411AE

ACP112BL

PEMKOSTCSET-2A

S773BL (Single Row) and S44BL (Single Row)

2008APK

PEMKOSTCSET-2B

S44BL (Two Rows)

2008APK

PEMKOSTCSET-2C

S442BL (Single Row) and S44BL (Single Row)

2008APK

PEMKOSTCSET-2D

303AS and S44BL (Single Row)

PEMKOSTCSET-2E

312CR and S44BL (Single Row)

2008APK

PEMKOSTCSET-3A

S773BL (Single Row) and S44BL (Single Row)

3692APK773BL

PEMKOSTCSET-3B

S44BL (Two Rows)

3692APK773BL

PEMKOSTCSET-3D

303AS and S44BL (Single Row)

3692APK773BL

PEMKOSTCSET-3E

312CR and S44BL (Single Row)

3692APK773BL

2008APK

PEMKOSTCSET-4A

S773BL (SingleRow) and S44BL (Single Row)

2009APK

PEMKOSTCSET-4B

S44BL (Two Rows)

2009APK

PEM KOSTCSET-4D

303AS and S44BL (Single Row)

2009APK

PEMKOSTCSET-4E

312CR and S44BL (Single Row)

2009APK

How To: 1. Locate the Sealed-in-Place (inoperable) rating for your door. 2. Determine the maximum allowable drop for your opening (i.e. -1 db). Note: the numbers are represented as negative numbers as they will decrease your inoperable rating by the number shown (i.e. 45 using a -1 kit will decrease the inoperable rating from 45 to an operable of 44) 3. Find a number in the column below your door's inoperable rating that will keep your opening in the allowable range. 4. Select a kit (or one of the kits given if Alternate Kits are shown), place it on your Purchase Order and add your opening size in inches (i.e. a 3/0 x 7/0 opening will be ordered as a 3684).

Corner Pad

Item Number

Sealed-in-Place Door STC Rataing 58 to 54

PEMKOSTCSET-1A Alternate Kits: 1B, 1C, 1D, 1E

53 to 49

48 to 46

45 to 43

<42

-2

-2

-1

0

PEMKOSTCSET-2C

-3

-2

-2

-1

0

PEMKOSTCSET-2D Alternate Kits: 2A, 2B

-3

-2

-1

-1

0

PEMKOSTCSET-2E

-2

-2

-1

-1

0

-2

-1

0

0

-2

-1

0

0

-2

-1

0

0

0

0

PEMKOSTCSET-3A PEMKOSTCSET-3D PEMKOSTCSET-3E

-2

PEMKOSTCSET-4A PEMKOSTCSET-4B

0

0

PEMKOSTCSET-4D

0

0

PEMKOSTCSET-4E

0

0

NOTE: A seal set cannot increase the sealed-in-place rating; a zero drop is the best performance any seal set can provide.

AVAILABLE FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see FULL LINE CATALOG or WEBSITE for finish chart) A (Mill Finish Aluminum) C (Clear Anodized) D (Dark Bronze Anodized)

800-824-3018 | www.pemko.com Check the web site for the up-to-date catalog Copyright © 2012-2017 Pemko Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Pemko Manufacturing Company is prohibited.

25

Pemko Condensed Catalog

Sliding and Folding Hardware Sliding 200 Series

Folding 100 Series

Features: ™ CZZYaZWZVg^c\ hangers for smooth operation ™ '%%aW#eVcZa capacity ™
FOR FOLDING DOORS AND ROOM DIVIDERS TO 100 LBS.

High quality hardware makes medium weight folding doors efficient and easy-touse. Two and four leaf kits are available FOUR PANEL: HF4/100A Kits Include: 1 ea 2 ea 2 ea 2 ea 6 ea 2 ea 1 ea 1 ea

H200A Kits Include: 1 ea 280C Track 2 ea H222R1 Hangers 1 ea 102N Nylon Guide 2 ea TELS-14KIT Stops 1 ea Adjusting Wrench and Mounting Hardware Part Number H200A/4 H200A /5-4 H200A/6 H200A/7 H200A/8 H200A/10 H200A/12 H200/6 H200/8

Standard Kit Sizes Material Track Length Door Width Aluminum 48" 24" Aluminum 64" 32" Aluminum 72" 36" Aluminum 84" 42" Aluminum 96" 48" Aluminum 120" 60" Aluminum 144" 72" Steel 72" 36" Steel 96" 48"

280C Track 283 Hangers 289T Top Pivots 289B Bottom Pivots 282HD Hinges 106HF/94 Guide 94A Guide Channel Adjusting Wrench and Mounting Hardware

OPTIONS: Mounting Bracket 281 available as 5 pack only, 2815 Bottom Channel 94A Threshold 971A Finish: 280A Track available in Clear Anodized (C) Part Number HF2/100A/2 HF2/100A/2'6 HF2/100A/3 HF2/100A/4 HF4/100A/4 HF4/100A/5 HF4/100A/6 HF4/100A/8 HF2/100/4* HF4/100/8*

Bypass Track Series

Standard Kit Sizes Material # of Panels Aluminum 2 Aluminum 2 Aluminum 2 Aluminum 2 Aluminum 4 Aluminum 4 Aluminum 4 Aluminum 4 Steel 2 Steel 4

13/8" Thick Doors Side Wall Mount

For Bypassing Panels to 200 lbs.

Track Length 24" 30" 36" 48" 48" 60" 72" 96" 48" 96"

13/4" Thick Doors Overhead Mount

™Fits 13/8" and 13/4" doors ™Needle-bearing wheels for ultra smooth performance ™Load capacity 200 lbs. (2 hangers) ™Extruded aluminum track HBP200A Kits Include: 1 ea 2802C Track 4 ea H222R1 Hangers 2 ea 102N Nylon Guide 4 ea TELS-14KIT Stops 1 ea Adjusting Wrench and Mounting Hardware OPTIONS: Hardware Kit Mounting Bracket Track Track Stop (bumper) Bottom Channel Fascia, Snap-On Roller Guide

H200 PACK 2812 280D 287HD 94A F134C F134D 106R/94

Dual Guide Channel Polypropylene Guide Rail

2802BT EPD3BL for use with 102N

FINISHES: 280C Track available in Clear Anodized (C) F134C Fascia in Clear Anodized (C) NOTE: Route door 9⁄16" deep by 1/4" wide to receive 102N Guide.

800-824-3018 | www.pemko.com Check the web site for the up-to-date catalog

26

Copyright © 2012-2017 Pemko Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Pemko Manufacturing Company is prohibited.

Pemko Condensed Catalog

Sliding and Folding Hardware (Cont.) W60 Series for Wood Doors Configurations: Installations: ™ H^c\aZ ™H^YZLVaaBdjcidcan ™ 7^"eVgi^c\ Features: ™ BVYZd[(%)hiV^caZhhhiZZa ™ CnadcXdViZYhiV^caZhhhiZZal]ZZa for smooth operation ™ &,+aW#eVcZaXVeVX^in ™ *nZVglVggVcin Finishes: ™ 7gjh]ZYHiV^caZhhHiZZaL+% ™ 9Vg`7gdcoZHiV^caZhhHiZZaL+%9 ™ Eda^h]ZYHiV^caZhhHiZZaL+%E W60 Kits Include: 1 ea BAR/_ Stainless Steel Track – BRACKET2 Stainless Steel Wall Brackets 2 ea 62 Stainless Steel Hangers 1 ea WOODGUIDE Stainless Steel Guide 2 ea STOP2 Stainless Steel Stops Mounting Hardware

1" 116 [26 mm]

1" 116 [27 mm]

1" 22 [63 mm]

43 8" [111 mm]

15" 316 [100mm]

11" 16 [17 mm]

1 4" [6 mm]

9 16" [14 mm]

3" 8 [10 mm]

Standard Kit Sizes

NOTE: If ordering individual parts in the optional Dark Bronze or Polished finishes, be sure to include a suffix "D" for Dark Bronze or "P" for Polished Stainless 94A 106R/94 102N EPD3BL For Use With WOODGUIDE

Lites & Louvers Low Profile - Beveled Lite Kit ™ I]ZAI"7&A^iZ@^iegdk^YZhVl^YZk^Zl^c\Vc\aZ# For use with glazing material requiring a 3/8" pocket in 13/4" wood or metal doors. The LT-B1 installs without drilling holes through the door for quick installation. The hemless design is a flush mounted assembly and is ideal for clean environments ™ 22 gauge galvannealed steel blank side and 20

3" 28 [60mm]

13 4" [44 mm]

9" 116 [39 mm]

Options: See page 39 Bottom Channel Roller Guide Mortise Guides Polypropylene Guide Rail

NOTE: Alternate route dimension when using optional EPD3BL

Part Number

Material

Track Length

Door Width

W60/6

304 Stainless Steel

783/4"

36"

W60/8

304 Stainless Steel

98

16

48"

3/

7/

"

W60D/6

304 Dark Bronze Stainless Steel

78 4"

36"

W60D/8

304 Dark Bronze Stainless Steel

987/16"

48"

W60P/6

304 Polished Stainless Steel

78 4"

36"

W60P/8

304 Polished Stainless Steel

98

3/ 7/

"

16

48"

Inverted “Y” Louver ™ The LV-IY Louver for 13/4" wood or metal doors provides 50% free air flow. The 20 gauge inverted “Y” blades add stiffness and a burr-free exposed edge. The 18 gauge galvanneal mitered frame secures the grill assembly in place giving it a clean appearance ™ 18 gauge galvannealed frame ™ 20 gauge galvannealed inverted “Y” blades

5

16

(7.9)

gauge galvannealed steel inner frame 13/4" Door

LT-B1_ AVAILABLE FINISHES: B, D, G

LV-IY_ AVAILABLE FINISHES: B, D, G

Door

9/

1

7/

16

16

"

"

1/

16

1/

8

"

"

Order Size & Door Cutout

3/ " 8 Glazing Pocket

AVAILABLE FINISHES FOR PRODUCTS SHOWN ON THIS PAGE (see FULL LINE CATALOG or WEBSITE for finish chart) B (Beige Powder Coat) D (Dark Bronze Duranodic Powder Coat) G (Gray Primer Powder Coat)

800-824-3018 | www.pemko.com Check the web site for the up-to-date catalog Copyright © 2012-2017 Pemko Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Pemko Manufacturing Company is prohibited.

27

ASSA ABLOY 5535 Distribution Drive Memphis, TN 38141 [email protected] ™ www.pemko.com

MEMPHIS, TN USA P: 800 824-3018 F: 800 243-3656

VENTURA, CA USA P: 800 283-9988 F: 800 283-4050

Copyright © 2012-2017 Pemko Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Pemko Manufacturing Company is prohibited.

VANCOUVER, BC CA P: 877 535-7888 F: 877 535-7444

TORONTO, ON CA P: 877 535-7888 F: 877 535-7444

80008 3/17