Network Exam

1. How do you prevent or ensure the inappropriate use of the domain Administrator account. A. Renaming the Administrator account and change password. B. Track failed logons on the domain C. Set account lockout policies to track after one failed attempt. 2. You are an administrator in a company that has Windows 2000 professional systems. Your users have been installing unsupported USB drivers on to their systems causing them to lock up and fail. You want to insure that only drivers that are in the HCL can be installed. What must be done? (Choose 2) A. Ignore - Install all files, regardless of file signature B. Warn - Display a message before installing an unsigned file C. Block - Prevent installation of unsigned files D. Apply setting as system default 3. Sandy has a Windows 2000 Professional system. Today she is visiting another department, and is using a Windows NT 4.0 system. She wants to print a document but is missing her printer. You want her to be able to print from any computer she logs in at. What can you do to insure that she has this ability? A. Create a roaming profile B. Create a mandatory profile C. Create a local profile 4. You are an administrator of your company's network. You want to perform routine upgrades on your Windows 2000 Server computer. You use your non administrator user account in the domain to log on to the server. You want to update all of the critical system files and patches on the server in the shortest possible time. What should you do? A. Run Windows Update. B. Run System File Checker. C. Log on as an Administrator and run Windows Update. D. Log on as an Administrator and run System File Checker 5. You are the administrator of your company's network. Yo ur network has 75 windows 2000 professional computers and eight Windows 2000 Server computers. Users on the network drive save their work files in home folders on a network server. The NTFS partition that contains the home folders has Encrypting File System (EFS) enabled. The partition also has disk quotas defined. A user named Candy reports that she cannot save any files to her home folder. She also cannot update files in her home folder. When she attempts to save files to the folder she receives the follo wing error message "insufficient disk space". Other users are not experiencing this problem with their home folders. You want to enable Candy to save files in her home folder. What should you do? A. Log on to the network as a Recovery Agent. Decrypt all of candy's files in her home folder.

B. Log on to the network by using the domain Administrator account. Grant Candy Full control permission to her home folder. C. Use Windows Backup to archive and remove old files on the server. D. Increase the server a disk quota entry for Candy to accommodate the additional files.

6. You want to upgrade your Windows NT 4.0 Server to Windows 2000 Server. The current system partition uses the FAT file system. You start the setup by starting the computer from the Windows 2000 Server CD-ROM and receive the following error message: "You chose to install Windows 2000 on a partition containing another operating system. Installing Windows 2000 on this partition may cause the operating system to function improperly". You are unable to perform the upgrade. What should you do to resolve this problem? A. Convert the partition to NTFS. B. Disable Advanced Configuration and Power Interface (ACPI) support for the computer. C. Restart the computer and then run WINNT32.EXE from the Windows NT Server 4.0 environment. D. Restart by using the Setup floppy disks. 7. You configure one of your Windows 2000 Server computers as a print server. You install a second Plug and Play network adapter on the server to improve network performance. The first adapter uses IRQ11. The second adapter uses IRQ5. The server is now unable to print to the print device connected to the non-Plug and Play LPT2 port adapter. You want to continue to use print devices installed on Plug and Play LPT1 and non-Plug and Play LPT2. What should you do? A. Use device manager to change the IRQ for LPT1 to IRQ10. B. Use device manager to change the IRQ for LPT2 to IRQ7. C. Edit the CMOS settings on the server to reserve IRQ7 for non-Plug and Play devices. D. Edit the CMOS settings on the server to reserve IRQ5 for non-Plug and Play devices. 8. You are the administrator of a Windows 2000 Server computer. The computer is configured to have a single 18-GB drive, which contains the operating system files. This drive also contains a shared folder where five network users store their Microsoft Excel files. You want to prevent each network user from using more than 1GB of space in the shared folder. Which action or actions should you take to achieve this goal? (Choose all that apply) A. Create a quota entry for everyone account. Set the quota limit to 1 GB. B. Enable disk quotas on the volume. C. Set the default disk quota limit to 1 GB. D. Select the Deny disk space to users exceeding quota limit check box. E. Upgrade the disk to a dynamic disk.

9. You edit the registry on your Windows 2000 Server and reboot. The computer stops responding before you reach the login screen. How do you restore the computer's previous configuration? A. Boot into Safe Mode. Run REGEDIT and click File, Restore Previous Registry. B. Start the computer using Recovery Console. Run FIXBOOT C:. Reboot. C. Run the emergency repair process and choose "Registry Restore." Reboot. D. Restart the computer and choose the "Last Known Good Configuration" as it boots. 10. You want to configure NW Adapter for communications to and from the Windows-based client computers exclusively. Which checkbox or boxes in the Local Area Connection Properties dialog box should you select? Choose all that apply. A. Gateway (and client) Services for Netware. B. Client for Microsoft Networks. C. File and Printer Sharing for Microsoft Networks. D. NWLink NetBIOS. E. NWLink IPX/SPX/NetBIOS Compatible Transport Protocol. F. Internet Protocol (TCP/IP 11. Your computer is configured to dual-boot between Windows 98 and Windows 2000. How would you configure the computer so that Windows 98 would be the default selection if the user did not make a choice within the specified amount of time? A. Through the STARTUP.INI file B. Through the SYSTEM.INI file C. Through Control Panel, Startup Options D. Through Control Panel, System, Startup and Recovery 12. You encrypt three files to ensure the security of the files. You want to make a backup copy of the three files and maintain security setting. You have the option of backing up to either the network or a floppy disk. What should you do? A. Copy the files to a network share on a NTFS volume. Do nothing further. B. Copy the files to a network share on a FAT32 volume. Do nothing further. C. Copy the files to a floppy disk that has been formatted by using Windows 2000 Professional. Do nothing further. D. Place the files in an encrypted folder. Then copy the folder to a floppy disk. 13. Which protocol works on layer 3--network layer—of the OSI model? A. IP B. NCP C. SPX D. NetBIOS 14. You are the administrator of the Windows 2000 Server network shown in the exhibit. Users in the Research group and the Executive group have permission to access the Internet through a Windows 2000 Server computer running Microsoft Proxy Server. These users must enter their proxy server user names and passwords to connect to the proxy server, to the Internet, and to your local intranet server. The users who do not access the Internet do not have user accounts on the proxy server

and, therefore, cannot connect to the intranet server. You want all users to be able to connect to the intranet server without entering a separate user name and password. What should you do? A. Move the intranet server to the client segment of the network. B. Move the proxy server to the server segment of the network. C. Configure each client computer to bypass the proxy server for local addresses. D. Configure each client computer to use port 81 for the proxy server. 15. You are an administrator of your company's network. You want to perform routine upgrades on your Windows 2000 Server computer. You use your non administrator user account in the domain to log on to the server. You want to update all of the critical system files on the server in the shortest possible time. What should you do? A. Run Windows Update. B. Run System File Checker. C. Log on as an Administrator and run Windows Update. D. Log on as an Administrator and run System File Checker.

16. You install Terminal Services on a Windows 2000 domain controller. You install Terminal Services Client on users' client computers. Users report that when they try to connect to the Terminal server, they receive the following error message: "The local policy of this system does not allow you to logon interactively." When you attempt to log on to the Terminal server as an administrator from a user's computer, you log on successfully. You want users to be able to log on to the Terminal server. What should you do? A. Grant the users the right to log on as a service. B. Grant the users the right to log on locally. C. Grant the users the right to log on over the network. D. Copy the users' profiles to the Terminal server. E. Copy the users' home folders to the Terminal server. 17. You install your boot volume on volume C on your Windows 2000 Server computer. You mirror volume C on dynamic Disk 1. Two years later, during routine server maintenance, you open Disk Management and find that the status of volume C is Failed Redundancy. The status of Disk 1 is missing. You attempt to reactivate Disk 1, but the status of volume C does not return to Healthy. What should you do next? A. Replace Disk 1 and restart the computer. The mirror will automatically regenerate. B. Remove the mirror on Disk 1, replace the disk, and then add back the mirror to the new Disk 1.

C. Replace Disk 1 and copy all data from volume C to a new NTFS primary partition on the new Disk 1. Restart the computer. D. Rescan the disks, remove the mirror, and delete the data on Disk 1. Then re-create the mirror. 18. After you install a new video adapter, one of the users at a remote location reports that Routing and Remote Access does not accept calls. After you resolve the Routing and Remote Access problem, you need to configure the server to prevent users from installing any unsigned device drivers. What two actions should you take in the Driver Signing Option dialog box? (Choose two) A. B. C. D.

Set File Signature Verification to Ignore Set File Signature Verification to Block Set File Signature Verification to Warn Select the Apply settings as system default check box

19. Server1 wants to talk to Server2; Which IP address is default gateway for Server1, select the answer.

Server 1

A. B. C. D.

Server 2

IP1 IP2 IP3 IP4

20. You have 6 domain controllers’ srv1, srv2, srv3, srv4, srv5, srv6, in three main segments. You back up all System State data of your network. The tape device is attached to srv1. To which server can you restore the System State data? A. B. C. D.

Any server. Any server that is on the same segment of srv1. Any server on a different segment than srv1. Only to server srv1.

21. What is the maximum number of processor that a Windows 2000 Professional computer can support?

A. B. C. D.

One Two Four Eight

22. Your accounting department has 20 users. You purchase 20 identical computers for the department to use. You install Windows 2000 professional onto each computer. The computers will be shared by the members of the accounting department. You want each user in the department to be able to keep their individual desktop settings no matter which computer they are using. What is the easiest way to do this? A. Configure each computer to join a workgroup. Create a group names accounting and add each user to it. B. Configure each computer to join a workgroup. Create a domain user account that uses roaming user profiles. C. Configure each computer to join a domain. Set everyone's home directory to the same directory. D. Configure each computer to join the domain. Create a domain user account that uses roaming user profiles. 23. A. B. C. D. E. F.

What file systems are supported by Windows 2000 Professional? (Choose three)

NTFS NFS FAT FAT32 TCP/IP UNIX

24. Your have a Windows 2000 Professional computer. It has one NTFS partition. You have a compressed directory containing a file name "Taxes.doc". This file is uncompressed. You move the file to a compressed directory. What happens to the file? A. B. C. D.

It becomes compressed. It remains uncompressed. All NTFS permissions become reset and it becomes compressed All NTFS permissions become reset and it remains uncompressed

25. When a computer running Windows 2000 Professional is locked, which of the following happen? (Choose two) A. B. C. D.

Applications continue to run. Services continue to run. All users that are logged onto the machine become disconnected. All processes are stopped.

26. You install Windows 2000 Professional onto a computer. What networking components are installed by default onto this computer? (Choose One)

A. B. C. D. E. F.

NetBEUI TCP/IP File and Printer Sharing for Microsoft Networks IPX/SPX RIP Client for Microsoft Networks.

27. How can you recreate the Windows 2000 setup disks from the command line? A. B. C. D.

Winnt32.exe/ox makeboot.exe makebt32.exe winnt.exe /ox

28. What is the maximum amount of memory that Windows 2000 supports? A. B. C. D.

2GB 4GB 8GB 16GB

29. What is the minimum amount or memory recommended for installing Windows 2000 Professional? A. B. C. D.

32MB 64MB 128MB 32MB if ECC RAM

30. Which of these operating systems can be directly upgraded to Windows 2000 Professional? A. B. C. D. E. F.

Windows 95 Windows 98 Windows 3.1 Windows NT 4 Windows N.T 3.51 Windows 3.11

31. Which of the following does Windows 2000 Professional support for Local print devices? (Choose all that apply) A. B. C. D. E.

LPT COM USB AppleTalk SCSI

1. What are the Network layers?

2. What are the private IP ranges? 3. Write the classes of IP Address (ex. A, B, C,) 4. What is 127.0.0.0 IP range? 5. What is the deferent between static IP and dynamic IP? 6. What is the Gateway? Explain…. 7. Why we need the Router? 8. Explain the Different between Switch And Hub.