Navakar Plastics Jam Nager-8[1]
This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA
Overview
Download & View Navakar Plastics Jam Nager-8[1] as PDF for free.
More details
- Words: 819
- Pages: 3
SREE SHANTHINI MACHINE WORKS OFFICE & WORKS – 2/139 AVINASHI ROAD, CHINNIYAMPALAYAM CITY - COIMBATORE – PIN – 641062. STATE - TAMILNADU – COUNTRY – INDIA N0 – 00 91 422 6587262. Telefax 0091.0422-2625898 E MAIL – [email protected] [email protected] 9360560425 10-12-09 9629109192
NAVAKAR LASTICS 346,GIDC-11 NEAR LALPUR BY PASS JAMNAGER GUJRAT-361006 09429798999 Kind Attn: Mr. MITUL HARANIYA Dear Sirs,
QUOTATION AND TECHNICAL SPECIFICATIONS OF SSMW RING TWISTER MACHINE 1. NO. OF SPINDLES
-
32 SPINDLES.
2. RING DIA.
-
10”
3. GAUGE
-
14”
4. TYPE OF YARN TO BE TWISTED 5. DIRECTION OF TWIST
-
6. RINGS SIZE 7. SPINDLE & BOLSTERS 8. RING HOLDER
HDPE, PP, NYLON “Z” OR “S”
-
1.5”
-
HZ 77 INSERT FITTED WITH SPINDLES. -
ALUMINUM HOLDER WITH INDIVIDUAL OIL POT PROVISION.
9. SPINDLE DRIVE
-
10” ALUMINIUM PULLEY WITH SR-9 TYPE DOUBLE JACKY PULLEYS.
10. NO. OF SPINDLE DRIVE
-
TWO SPINDLES DRIVE.
11. SPINDLE DRIVE TYPE 12. HEIGHT OF THE LIFT
-
20 MM NYLON SANDWICH HABASIT BELT. 12” STRAIGHT BUILT.
13. RING RAIL BALANCING
-
14 WINDING UP PACKAGE-
-
15. DELIVERY ROLLERS 16. TOP ROLLERS
BY MEANS OF DEAD WEIGHT. DOUBLE FLANGED BOBBINS -
-
70 MM TWO LINE ROLLERS RUBBER MOUNTED 75 MM OD.
17. CALENDAR ROLL DRIVE
-
CHAIN GEAR DRIVE.
18. COP MOTION
-
MECHANICAL COP MOTION.
19. TRAVERSE
-
INCLUDED.
20. SEPARATORS
- MACHINE TO BE EQUIPPED WITH CONTINUES RUNNING FROM SPINDLE RAIL TO DELIVERY MADE OF THICKSS SHEET EASILY REMOVABLE WHEN REQUIRED.
21. LIFTING
-SUSPENSION TYPE RING RAILS MOUNTED ON BALL BEARINGS.
22. DRIVE SHAFT
-
50 MM DIA EN 8 GROUND BAR
23. FOOT PLAT FORM
-
FOOT ANGLES BOTH SIDE
24 YARN GUIDE ROD
-
1/2” .
25 TWIST CHANGE WHEEL
-
8 NOS. 30 T 35,38,40,45,48,50,55
26. TWIST COMBINATION WHEEL
-
10 D P SPUR 50 T 2 NOS, 38T 2 NOS 62 T 2 NOS, 26 T 2 NOS
27. LIFT GEAR 28. BALANCING SYSTEM
-
29. BOTTOM SHEET
-
30. HEAD STOCK ARRANGEMENT 31. LAPPET
90 T LEFT HAND GUN METAL INDIVIDUAL SECTIONAL BALANCING. MS FOLDED
- ALTERNATE CASTING AND NYLON GEARS - RIGID CAST IRON BODY SPRING LOADED STEEL HOOK WITH ADJUSTABLE TYPE AND SEPARATE LIFTING CONTROL.
32. MOTOR &PANEL BOARD
-
15 HP AT YOUR COST
33. MACHINE PULLEY
-
14” B TYPE 4 GROOVE
34. CREEL
-
FOUR LINE CREEL
NOTE: WE RESERVE THE RIGHT TO MAKE CHANGES IN THE DETAILS / SPECIFICATIONS WITHOUT NOTICE
PRICE TERMS AND CONDITIONS ADDITIONAL SPARES:
ANY ADDITIONAL SPARES REQUIRED WILL BE CHARGED EXTRA.
VALIDITY :
THIS OFFER IS VALID FOR 30 DAYS FROM THE DATE OF ISSUE. KINDLY GET IN TOUCH WITH US AND RECONFIRM THE CURRENT PRICES BEFORE PLACING THE ORDER.
PRICE:
RS ; 20200/ . ( TWENTY THOUSAND TWO HUNDRED ONLY ) ALL PRICE- EX WORKS OUR FACTORY AT COIMBATORE.
TAXES :
2%AGANIST FORM “C”
TRANSIT INSRANCE :
BUYER HAVE TO ARRANGE FOR THE INSURANCE AS
THEIR OWN TERMS OF PAYMENT:
50 % DOWN PAYMENT WITH THE ORDER, 50% BALANCE AMOUNT AGAINST PERFORMA INVOICE BEFORE SHIPMENT OF THE CONSIGNMENT. ALL PAYMENTS ARE NET AND WITHOUT DEDUCTION. ALL BANK CHARGES INCURRED IN CONNECTION WITH AN ORDER OUTSIDE THE INDIA ARE TO BE PAID BORN BY BUYERS ONLY
DELIVERY:
MAXIMUM 90 DAYS FROM HAVING CLARIFIED ALL TECHNICAL AND COMMERCIAL DETAILS AND RECEIVED THE DOWN PAYMENT.
TESTING & DEMONSTRATION:
WE WILL HAVE TO CONDUCT VARIOUS TRIALS TO ESTABLISH THE PERFORMANCE OF THE PLANT. MATERIALS REQUIRED FOR SUCH TRIAL WILL HAVE TO BE SUPPLIED BY THE BUYER AND THE COST OF THE MATERIALS TO BE BORNE BY THE BUYER ONLY.
PACKING :
2% PACKING CHARGES INCLUDED PRECISION ITEMS WILL BE PACKED IN WOODEN BOXES AND EXPENSES OF THIS NATURE WILL BE BORNE BY YOU
ERECTION & COMMISSIONING CHARGES RS15000/:
OUR TWO ENGINEERS WILL SUPERVISE ERECTION, INSTALLATION AND COMMISSION OF THE PLANT. ALL NECESSARY TOOLS, MATERIALS AND SKILLED AND UNSKILLED LABORERS REQUIRED FOR ERECTION AND COMMISSIONING TO BE PROVIDED BY THE BUYER AS PRESCRIBED BY OUR ERECTION ENGINEERS. YOU WILL HAVE TO PAY TO&PRO FROM COIMBATORE [INDIA] TO YOUR DESTINATION FOR THE VISIT OF OUR TWO TECHNICIANS. PROVIDE THEM LOCAL TRANSPORTATION, FOOD & BEVERAGES AND PROPER ACCOMMODATION IN THE HOTEL TO SUIT THEIR STATUS.
.
WARRANTY: WE OFFER ONE YEAR WARRANTY FOR MECHANICAL PARTS AGAINST MANUFACTURING DEFECT AND THERE IS NO ANY WARRANTY FOR ELECTRICAL AND ELECTRONIC PARTS. WE SHALL PROVIDE THE WARRANTY CARDS ISSUED BY THE RESPECTIVE MANUFACTURERS THIS WARRENTY DOES NOT APPLY TO DAMAGES OR FAULTS CAUSED BY IMPROPER OPERATION, MAINTENANCE OR REPAIR, OR BY MANIPULATION OF THE CUSTOMER HIMSELF RESPECTIVELY BY USING OTHER THAN SREE SHANTHINI MACHINE WORKS ORIGINAL SPARE PARTS. ALL PROPRIETARY RIGHTS RESERVED UNTIL THE ABOVE-MENTIONED AMOUNT IS ENTIRELY SETTLED. SUBJECT TO COIMBATORE JURISDICTION ONLY WE HOPE THAT THE ABOVE OFFER IS MOST COMPETITIVE AND WILLEXPECT YOUR VALUABLE ORDERS. THANKING YOU AND ASSURING BEST SERVICE AT ALL TIMES. YOURS FAITHFULLY, FOR SREE SHANTHINI MACHINE WORKS JOY JOHN
NAVAKAR LASTICS 346,GIDC-11 NEAR LALPUR BY PASS JAMNAGER GUJRAT-361006 09429798999 Kind Attn: Mr. MITUL HARANIYA Dear Sirs,
QUOTATION AND TECHNICAL SPECIFICATIONS OF SSMW RING TWISTER MACHINE 1. NO. OF SPINDLES
-
32 SPINDLES.
2. RING DIA.
-
10”
3. GAUGE
-
14”
4. TYPE OF YARN TO BE TWISTED 5. DIRECTION OF TWIST
-
6. RINGS SIZE 7. SPINDLE & BOLSTERS 8. RING HOLDER
HDPE, PP, NYLON “Z” OR “S”
-
1.5”
-
HZ 77 INSERT FITTED WITH SPINDLES. -
ALUMINUM HOLDER WITH INDIVIDUAL OIL POT PROVISION.
9. SPINDLE DRIVE
-
10” ALUMINIUM PULLEY WITH SR-9 TYPE DOUBLE JACKY PULLEYS.
10. NO. OF SPINDLE DRIVE
-
TWO SPINDLES DRIVE.
11. SPINDLE DRIVE TYPE 12. HEIGHT OF THE LIFT
-
20 MM NYLON SANDWICH HABASIT BELT. 12” STRAIGHT BUILT.
13. RING RAIL BALANCING
-
14 WINDING UP PACKAGE-
-
15. DELIVERY ROLLERS 16. TOP ROLLERS
BY MEANS OF DEAD WEIGHT. DOUBLE FLANGED BOBBINS -
-
70 MM TWO LINE ROLLERS RUBBER MOUNTED 75 MM OD.
17. CALENDAR ROLL DRIVE
-
CHAIN GEAR DRIVE.
18. COP MOTION
-
MECHANICAL COP MOTION.
19. TRAVERSE
-
INCLUDED.
20. SEPARATORS
- MACHINE TO BE EQUIPPED WITH CONTINUES RUNNING FROM SPINDLE RAIL TO DELIVERY MADE OF THICKSS SHEET EASILY REMOVABLE WHEN REQUIRED.
21. LIFTING
-SUSPENSION TYPE RING RAILS MOUNTED ON BALL BEARINGS.
22. DRIVE SHAFT
-
50 MM DIA EN 8 GROUND BAR
23. FOOT PLAT FORM
-
FOOT ANGLES BOTH SIDE
24 YARN GUIDE ROD
-
1/2” .
25 TWIST CHANGE WHEEL
-
8 NOS. 30 T 35,38,40,45,48,50,55
26. TWIST COMBINATION WHEEL
-
10 D P SPUR 50 T 2 NOS, 38T 2 NOS 62 T 2 NOS, 26 T 2 NOS
27. LIFT GEAR 28. BALANCING SYSTEM
-
29. BOTTOM SHEET
-
30. HEAD STOCK ARRANGEMENT 31. LAPPET
90 T LEFT HAND GUN METAL INDIVIDUAL SECTIONAL BALANCING. MS FOLDED
- ALTERNATE CASTING AND NYLON GEARS - RIGID CAST IRON BODY SPRING LOADED STEEL HOOK WITH ADJUSTABLE TYPE AND SEPARATE LIFTING CONTROL.
32. MOTOR &PANEL BOARD
-
15 HP AT YOUR COST
33. MACHINE PULLEY
-
14” B TYPE 4 GROOVE
34. CREEL
-
FOUR LINE CREEL
NOTE: WE RESERVE THE RIGHT TO MAKE CHANGES IN THE DETAILS / SPECIFICATIONS WITHOUT NOTICE
PRICE TERMS AND CONDITIONS ADDITIONAL SPARES:
ANY ADDITIONAL SPARES REQUIRED WILL BE CHARGED EXTRA.
VALIDITY :
THIS OFFER IS VALID FOR 30 DAYS FROM THE DATE OF ISSUE. KINDLY GET IN TOUCH WITH US AND RECONFIRM THE CURRENT PRICES BEFORE PLACING THE ORDER.
PRICE:
RS ; 20200/ . ( TWENTY THOUSAND TWO HUNDRED ONLY ) ALL PRICE- EX WORKS OUR FACTORY AT COIMBATORE.
TAXES :
2%AGANIST FORM “C”
TRANSIT INSRANCE :
BUYER HAVE TO ARRANGE FOR THE INSURANCE AS
THEIR OWN TERMS OF PAYMENT:
50 % DOWN PAYMENT WITH THE ORDER, 50% BALANCE AMOUNT AGAINST PERFORMA INVOICE BEFORE SHIPMENT OF THE CONSIGNMENT. ALL PAYMENTS ARE NET AND WITHOUT DEDUCTION. ALL BANK CHARGES INCURRED IN CONNECTION WITH AN ORDER OUTSIDE THE INDIA ARE TO BE PAID BORN BY BUYERS ONLY
DELIVERY:
MAXIMUM 90 DAYS FROM HAVING CLARIFIED ALL TECHNICAL AND COMMERCIAL DETAILS AND RECEIVED THE DOWN PAYMENT.
TESTING & DEMONSTRATION:
WE WILL HAVE TO CONDUCT VARIOUS TRIALS TO ESTABLISH THE PERFORMANCE OF THE PLANT. MATERIALS REQUIRED FOR SUCH TRIAL WILL HAVE TO BE SUPPLIED BY THE BUYER AND THE COST OF THE MATERIALS TO BE BORNE BY THE BUYER ONLY.
PACKING :
2% PACKING CHARGES INCLUDED PRECISION ITEMS WILL BE PACKED IN WOODEN BOXES AND EXPENSES OF THIS NATURE WILL BE BORNE BY YOU
ERECTION & COMMISSIONING CHARGES RS15000/:
OUR TWO ENGINEERS WILL SUPERVISE ERECTION, INSTALLATION AND COMMISSION OF THE PLANT. ALL NECESSARY TOOLS, MATERIALS AND SKILLED AND UNSKILLED LABORERS REQUIRED FOR ERECTION AND COMMISSIONING TO BE PROVIDED BY THE BUYER AS PRESCRIBED BY OUR ERECTION ENGINEERS. YOU WILL HAVE TO PAY TO&PRO FROM COIMBATORE [INDIA] TO YOUR DESTINATION FOR THE VISIT OF OUR TWO TECHNICIANS. PROVIDE THEM LOCAL TRANSPORTATION, FOOD & BEVERAGES AND PROPER ACCOMMODATION IN THE HOTEL TO SUIT THEIR STATUS.
.
WARRANTY: WE OFFER ONE YEAR WARRANTY FOR MECHANICAL PARTS AGAINST MANUFACTURING DEFECT AND THERE IS NO ANY WARRANTY FOR ELECTRICAL AND ELECTRONIC PARTS. WE SHALL PROVIDE THE WARRANTY CARDS ISSUED BY THE RESPECTIVE MANUFACTURERS THIS WARRENTY DOES NOT APPLY TO DAMAGES OR FAULTS CAUSED BY IMPROPER OPERATION, MAINTENANCE OR REPAIR, OR BY MANIPULATION OF THE CUSTOMER HIMSELF RESPECTIVELY BY USING OTHER THAN SREE SHANTHINI MACHINE WORKS ORIGINAL SPARE PARTS. ALL PROPRIETARY RIGHTS RESERVED UNTIL THE ABOVE-MENTIONED AMOUNT IS ENTIRELY SETTLED. SUBJECT TO COIMBATORE JURISDICTION ONLY WE HOPE THAT THE ABOVE OFFER IS MOST COMPETITIVE AND WILLEXPECT YOUR VALUABLE ORDERS. THANKING YOU AND ASSURING BEST SERVICE AT ALL TIMES. YOURS FAITHFULLY, FOR SREE SHANTHINI MACHINE WORKS JOY JOHN
