Napkin Fold Instructions

Envelope Napkin Fold Step 1 Position the napkin diagonally in front of you, with the left side facing up. Create a triangle by folding the lower corner up to the top corner. Step 2 Fold both lower corners to the middle. Step 3 Once more fold the outer portions to the middle. Step 4 Fold the triangle down to give the envelope its final shape.

Cone Napkin Fold Step 1 Fold napkin in half to create a rectangle. Step 2 Fold the napkin again to create a square. Step 3 Orient the napkin so that the open end is facing away from you. Fold the top-most layer all the way forward. Step 4 Turn the napkin over and fold the left hand side of the napkin over two thirds of the way. Fold the right hand side of the napkin over to match the left hand side.

Silverware Napkin Fold Step 1 Fold napkin in half to create a rectangle. Step 2 Fold the napkin again to create a square. Step 3 With the closed side facing right, fold down the top layer to form a triangle with that top layer. Step 4 Flip the napkin over. Fold the left side and then the right side 1/3 towards middle. Step 5 Flip the napkin back with the front side facing up. Slide in the desired cutlery and lay the napkin on a plate.

Scarf Napkin Fold Step 1 Lay napkin flat and grasp center point. Step 2 Insert into napkin ring or tie a ribbon into a bow for a lovely homemade napkin ring.

Goblet Fan Napkin Fold Step 1 Lay the napkin flat. Step 2 Begin accordian folding from the bottom, all the way up to the top. Make each fold about 3/4" 1" wide. Step 3 Fold the pleated napkin in half for a shallow wine glass or over 1/4th of the way for a taller glass such as the iced tea glass (pictured). Step 4 Insert the napkin into the goblet. Step 5 Unfold the pleats and shape into a fan. Interlock the two center pleats if needed to keep the fan intact.