Nabakem Textile Articles

NC-202

Features Excellent heat-resistance property 100% lubricating and releasing efficiency ; Yarn cutting is prevented and sticking and solidification of polymer are prevented at the time of melt spinning. Non-flammable ; This release agent can be used in a textile mill where shall strictly be careful with flammables. Uses To release the fiber at the time of melt spinning the synthetic fiber such as nylon, polyester, etc. To prevent from raising a nap on a fiber, to give smoothness on the fabrics, to prevent from generating rough nap and to prevent from yarn cutting at the time of spinning. Release agent for plastic, rubber and ceramics To prevent from scorching and adhering of various Cutters and to prompt work efficiency. Packing Aerosol 460g/can, 20cans/Box

NTC-50 (Spinning Nozzle Finishing Agent

Features NTC-50 is a finishing agent for sophisticated spinning nozzle. Various resins and carbons adhered to spinning nozzle are removed with periodic salting. However, sometimes fine hole finishing is not satisfactory. Based on permeation and dissolution action unique to soft surfactant, NTC-50 implements sophisticiated finishing without damaging SUS. Uses Cleaner only for melt spinning of synthetic yarn. Packing Bulk 20㎏

RC-33A (Residuum Cleaner, Foam type, Heater Plate Surface Degreaser

Features Consist of nonion-surfactant, corrosion inhibitor and special fine chemically additives. Excellent cleaning, degrease ability due to superior effect of penetrating, dispersing, cleaning. Hydrocarbon halide, chloric hydrocarbon and aromatic hydrocarbon not contained. Safe to human body. With anticorrosive agent added, it gives antirusting effects to cleaned surface. Peppermint aroma is added for comfortable work. Uses Cleaning of the dirt accmulated on the godget mounted on kbitting machine, hot pin, yarn process, draw-twister and heated part like engine heating plate. Packing Aerosol 500㎖/can, 20cans/Box