SIDDAGANGA INSTITUTE OF TECHNOLOGY, TUMKUR-3 DEPARTMENT OF MECHANICAL ENGINEERING SCHEME OF TEACHING AND EXAMINATION M.Tech (Thermal Power Engineering) I SEMESTER
Sl. No
1 2 3 4 5
Sub-Code
Title
09MTP11 09MTP 12
Teaching Dept.
Advanced Heat Transfer Advanced Fluid Mechanics 09MTP 13 Thermal Power Station -I 09MTP 14 Thermodynamics & Combustion Engineering 09MTP 15X Elective 1 Elective 1 09MTP151 Computational Heat
Teaching hours/Week L S P
Examination C.I.E. Marks
Credits
Mechanical Mechanical
4 4
1 1
-
End Exam (Hrs) 3 3
Total Marks
50 50
End Exam Marks 50 50
100 100
5(4+1) 5(4+1)
Mechanical Mechanical
4 4
1 1
-
3 3
50 50
50 50
100 100
5(4+1) 5(4+1)
Mechanical
4
1
-
3
50
50
100
5(4+1)
20
5
250
250
500
25
Transfer & Fluid Flow 09MTP 152 09MTP 153
Theory of IC Engines Energy Management Total
L-Lecture S-Subject Seminar/Semester P- Practical CIE-Continuous Internal Evaluation
Professor & Head Dept. of Mech. Engg.
SIDDAGANGA INSTITUTE OF TECHNOLOGY, TUMKUR-3 DEPARTMENT OF MECHANICAL ENGINEERING SCHEME OF TEACHING AND EXAMINATION M.Tech (Thermal Power Engineering) II SEMESTER
Sl. No
Sub-Code
Title
Teaching Dept.
Teaching hours/Week L S P
Examination
1
09MTP21
Theory and Design of Steam Turbines
Mechanical
4
1
-
End Exam (Hrs) 3
2
09MTP22
Mechanical
4
1
-
3
50
50
100
5(4+1)
3 4
09MTP23 09MTP24
Design of Heat Transfer Equipments for Thermal Power Plant Thermal power station-II
Mechanical Mechanical
4 4
1 1
-
3 3
50 50
50 50
100 100
5(4+1) 5(4+1)
Mechanical
4
1
-
3
50
50
100
5(4+1)
20
5
250
250
500
25
5
Advanced Power Plant Cycles 09MTPA25X Elective 2 Elective 2 09MTPA251 Engine Flow & 09MTPA252 09MTPA253
C.I.E. Marks
Credits Total Marks
50
End Exam Marks 50
100
5(4+1)
Combustion Design and Analysis of Piping Non-Conventional Energy Sources Total
L-Lecture S-Subject Seminar/semester
P- Practical CIE-Continuous Internal Evaluation
Professor & Head Dept. of Mech. Engg.
SIDDAGANGA INSTITUTE OF TECHNOLOGY, TUMKUR-3 DEPARTMENT OF MECHANICAL ENGINEERING SCHEME OF TEACHING AND EXAMINATION M.Tech (Thermal Power Engineering) III SEMESTER
Third Semester (22 weeks)
No. of hours / week Sub. Code
Name of the Subject
Practical/ Field work/ Assignment 8 weeks duration between 2nd & 3rd Semester 3 3
Lectures 09 MTP 31
Industrial Training
09 MTP 32
Seminar Total
Marks for
Total Marks
Duration of Exam in hours
IA
-
100
100
5
-
50 150
150
5 10
Exam
SIDDAGANGA INSTITUTE OF TECHNOLOGY, TUMKUR-3 DEPARTMENT OF MECHANICAL ENGINEERING SCHEME OF TEACHING AND EXAMINATION M.Tech (Thermal Power Engineering)
CIE
Credits
IV SEMESTER
Fourth Semester (22 weeks)
Sub. Code
Name of the Subject
09 MTP 41 Seminar Project work 09 MTP 42 Evaluation & Viva Voce Total
No. of hours / week Practical/ Lectures Field work/ Assignment 3
Duration of Exam in hours
Marks for Exam IA
Total Marks CIE
Credits
-
50
50
5
-
-
-
-
125+75=200
35
-
3
-
50
250
40
Grand Total form (Ist to IVth semester) : 2000 Note: 1. The hours per week shown in the column of Practical / Field work / Assignment are the contract hours for students, no load to be shown to the teachers. The teachers should provide guidance. 2. Industrial Training: 8 weeks of compulsory Industrial training to be undergone by the students as soon as the second semester examinations are over. An extensive report on the industrial training is to be submitted by the students and to be evaluated for 100 marks by a committee of the Department constituted by the Head of the Department. This is to be included in the Marks Card of III semester. 3. The seminar Marks are to be awarded by the department committee constituted for the purpose. 4. The project evaluation and Viva-Voce will be conducted by a committee consisting of the following. 4.1 4.2
Head of the department (Chairman) Two examiners appointed by the controller of examination.