Molykote Greases in Action in Sugar Mills Fibriser Sleeve Bearing (Once a season) – Molykote® Longterm 2+ Grease Properties of Molykote® Longterm 2+ that makes it ideal for high loads, shock impact loads, vibrations, continuous water contact areas and such tough conditions: 1. Synergistic combination of solid lubricants incorporated 3% 2. High base oil viscosity 295 - 310 cst 3. EP Additives 4. Adhesion promoters Basic Grease Composition: Lithium soap, mineral oil, corrosion inhibitors, EP additives, solid lubricants. NLGI 2 consistency. Cutter and Leveller Rolling Bearing – Molykote® Longterm 2+ Bearing Grease Conditions: shock and vibratory load. Conventional grease does not stay in place. Required is high viscosity, shock and impact load resistant grease. Speed is 560 to 580 RPM. Centrifuge Cylindrical Rolling Bearing – Molykote® BR2+ Grease Molykote® BR2+ is a premium molybdenum disulphide based high speed bearing grease with high load carrying capacity. Boiler ID Fan Bearings – Molykote® G-0100 High Temperature Grease Molykote® G-0100 is a high-temperature polyurea bearing grease for service temperature range of 180+ deg C. Tail bar Coupling – Molykote® Longterm 2+ Grease Initial lubrication with Molykote® GN + Paste followed by Molykote® Longterm 2+ Grease.