Match

  • November 2019
  • PDF

This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA


Overview

Download & View Match as PDF for free.

More details

  • Words: 377
  • Pages: 3
Matchbox Holder Spectrum Stained Glass Project Series by Carolyn Kyle ®

This handy match dispenser camouflages a large box of stick matches. Hang it by the wood stove or fireplace for great convenience with a decorator touch. Choose the plain or floral version. The plain one will be most attractive in heavily streaked or textured glass. For the floral one, we suggest bright primary colors for a Pennsylvania Dutch look. Or try earthy brown and gold for a Country look.

Plain – Use solid line only Floral – Use dotted lines and solid line.

© 2000 Spectrum Glass Company

Page 1

Spectrum Glass Suggestions FLORAL MATCHBOX HOLDER AREA

SQ. FT.

PENN. DUTCH COLORS

COUNTRY COLORS

A

1

307S Clear & White Opal

315-6S Dark Amber Opal

B

1/4

152G Red Cathedral, Granite

319-1S Light Amber Opal

C

1/4

339-6S Dark Blue Wispy

411-15G Chocolate on Gold

PLAIN MATCHBOX HOLDER AREA

SQ. FT.

PENN. DUTCH COLOR

COUNTRY COLOR

All A

1

337-6s Dark Blue Wispy

411-15s Chocolate on Gold

MATCHBOX HOLDER CONSTRUCTION 1.

2. 3.

4.

5.

6. 7.

Cut all pieces. For floral holder, foil interior lines of front and back sections with 3/16" or 7/32" foil. Solder front and back. Wrap the edges of completed sections and all other glass pieces with 3/8" foil. Place back section face up on table. For construction purposes, this will be considered the base upon which all pieces will be built, as in basic box construction. Place the two side pieces and “bottom” piece on base. (Figure 1) Fasten together well with masking tape. Tack solder, remove tape, then completely solder all of box’s interior lines. Tape front and front bin to box. Tack solder, remove tape. Completely solder all remaining exposed foil, using an ample amount of solder. (Figure 2) The floral holder hangs from open hole at top. To hang plain holder, loop a piece of #20 or heavier copper wire and solder in place. (Figure 3) Tin wire to match solder. Clean. Patina if desired. Remove outer sleeve from large box of wooden matches. Insert inner box with matches in place into holder. Matches will dispense from below as needed.

© 2000 Spectrum Glass Company

Page 2

Matchbox Holder Pattern

© 2000 Spectrum Glass Company

Page 3

Related Documents

Match
October 2019 52
Match
October 2019 52
Match
November 2019 54
Match
November 2019 53
Match
May 2020 32
Match
May 2020 36