Manjushree Products List Short

PRODUCTS WE HAVE ON OFFER: 1.

NANO TECHNOLOGY BASED Water

2.

Non – Skid Floor Treatments EPOXY, EPOXY PHENOLIC & EPOXY PU Coatings

3.

Repellent Coatings

Brushable Putty Consistency Wear Resistant/ Crusher Backing Compound Type Rapid Type Online (Very Fast Repair) Type, REPAIR SWIMMING POOLS & TILES WITHOUT DRAINING OUT WATER Wet Surface/ Underwater Type Glassline Repair/ High Corrosion Resistant Type 4. 5.

Synthetic Enamel Primers & Paints UBOND – ALL IN ONE WATERPROOFING, CRACKFILLING, GROUTING, LEAK REPAIRS

6. 7. 8. 9.

Rust Convertors & Passivators Paint Removers Antimicrobial Antifungal Paints, Coatings & Treatments Water Treatment Plants [ALL TYPES], Water Treatment Chemicals

Contact us at: [email protected] or Call us: 9820152385/ 9220537776

Roughness Value High Slip Potential Moderate Slip Potential Low Slip Potential

Below 10 µm 10-20 µm 20+ µm

Metal, Civil, Leak Repair & Restoration Compounds:

• Mold & Mildew Clear Waterproofing Sealer MicroGuard® AD25 is designed to seal a variety of interior & exterior surfaces, where the mitigation of mold growth is important. This clear, gloss, waterproofing sealer does not provide a nutrient source for microbial spores, plus the treated surface will remain cleaner from the attachment of dirt and other surface contaminates, which can become a food source for mold & mildew growth. Product is UV light stable. Stucco & E.I.F.S. Systems Sidewalks or Driveways Barrel Tile Roofs Concrete, Block or Brick Wood Studs & Dry Wall

• HVAC/R Coil Clear Protective Treatment DESCRIPTION: MicroGuard® AD35 Clear is designed for application onto air handling equipment to resist the destructive effects of corrosive environments, such as salt laden coastal air, or industrial environments. Its low solids formula penetrates deeply into the coil fin-pack, thus, ensuring maximum protection. Extensive field and laboratory testing has demonstrated that MicroGuard® AD35 significantly inhibits mold growth, which promotes better indoor air quality and also reduces corrosive degradation of HVAC/R equipment. Plus, its micro-thin film does not act as an insulating barrier to heat exchange efficiencies, rather, air-flow efficiencies are maintained and energy costs may be reduced over the life of the HVAC/R Unit asset. Ideal for field or shop installations.
Condenser Coils
Evaporator Coils
Non-Ferrous Metals
Weathered Cabinets WHERE TO USE: Aluminum or Copper Coils – Provides maximum corrosion protection over bare aluminum or copper HVAC/R coils, fins & fans. Suitable for weathered factory painted cabinets. Excellent on stainless steel. Do not use over galvanized steel.