Mainframe Abends

ABEND code index 1. User codes 2. System codes 3. Return codes 4. File status codes 5. SQL codes 6. Misc codes/msgs 7. CICS codes 8. IMS codes

Find name USECD SYSCD RETCD STACD SQLCD MISCD CICSCD IMSCD

---------------------------------------------------------------------USECD - User codes ---------------------------------------------------------------------U0001 - CHECK FOR WRONG BLOCKSIZE. U0002 - IMS PROBLEM - CALL OPERATION TO CHECK ON STATUS. IMS CRASHED. U0016 - IN UCC11 STEP - TRYING TO RESTART NON-RESTARTABLE STEP. IF JOB HAS STARTED AND HAS SORTWORKS IN THE STEP ABENDING TRY INCREASING THE SORTWORKS & RESTARTING THE JOB. U0016 * PROBABLE SORT CAPACITY EXCEEDED. (MAX TO BOT OF JOBLOG) * IF EXECUTING SORT W/ PARM=MAXSORT AND JOB ABENDS WITH SORTOUXX DEVICE MIXING PROHIBITED, CHANGE THE SORTOU00 DD DSN'S TO UNIT=CTAPE AND RESTART. THIS ABEND CAN OCCUR UNTIL DASD CONVERSION IS COMPLETE, ABOUT THE 1ST OF NOV. 92. U0016 * BLOCKSIZE ON INPUT FILE SHOULD BE OMITTED. U0020 - IN UCC11 STEP - DATA SETS USED FOR RESTART DIFFER FROM PRODUCTION RUN. TRY CANCELLING ABENDED JOB, DEMAND JOB IN ON HOLD, TYPE= RES, EDIT JCL, SATISFY HOLD REQUIREMENT TO RESTART. FOR I/P GDG CHANGE, USE BYPGDG: YES FIELD ON RESTART SCREEN. U0040 - IN UCC11 STEP - INCORRECT STEP RESTARTED, IMPROPER OR IMCOMPLETE STEP NAME. U0046 - PROBABLE PSB PROBLEM - READ VS UPDATE - CALL DBA ON CALL. U0064 - IN THE UCC11 STEP = CMT NOT CORRECT (GDG PROBLEM). THERE IS NO GDG BASE RECORD OR JOB IS CALLING ON A (0) GENERATION BUT THERE ARE NO GENERATIONS CATALOGUED. ALSO CAN BE DEADLOCK, CHECK SQLCODE, TRY RESTARTING. U0102 - PROBABLE IMS PROBLEM, TRY RESTARTING. - 10/31/92 U0102 IMSLOGR DD STATEMENT MISSING - WHEN EXECUTING CICSBTPH. DELETED STEPLIB DD PER KOSKI TO RUN. YOU COULD SUGGEST THIS TO DEV. U0109 - CHECK FOR SQL CODE. U0175 - DEADLOCK / CONTENTION. U0200 - CHECK SQL CODE IN ABENDED JOB. U0261 - INCORRECT PARM IN DL/I CALL. U0271 - I/O ERROR DETECTED WHILE PURGING BUFFERS DURING CKPOINT OPERATION U0273 - I/O ERROR DETECTED WHILE REPOSITIONING A GSAM DATASET DURING RESTART. U0295 - SORT-X PROGRAM LOADED USING WRONG EXECUTE. U0402 - PROBABLE IMS PROBLEM, TRY RESTARTING. U0428 - PSB NOT DEFINED AS AN IMS BMP/CONTACT DBA IN MORNING. U0437 - APPLICATION GROUP NAME OR RESOURCES SPECIFIED ARE NOT VALID FOR DEPENDENT REGION * MAY NEED 'AGN=' PARAMETER, SEE MEMBER '#RACF'. U0452 - PSB CONTENTION / 2 DB JOBS DEALLOCATING AT SAME TIME. IF YOU GET MORE THAN 2 U0452 ABENDS, RESTART THE TRANSACTION (SIGN ON IMS AND /STA TRAN DB????CP) (SAME NAME AS PSB) U0456 - PSB IS STOPPED, /STA PROG ALL, STARTS ALL STOPPED PSB'S. SEE 'CMISCOP.UCC7.SCHEDULE(CA7OS) FOR HOW TO DISPLAY IMS INFO. U0458 - DATABASE IS STOPPED/CONTACT DBA ON CALL, UNLESS B/U'S ARE RUNNING. U0474 - CANCELLATION OF JOB THROUGH /STOP REGION ABDUMP U0476 - PSB OR PCB PROBLEM - CALL PROGRAMMER. U0519 U0522 - JOB TIMED OUT WAITING FOR A TAPE MOUNT. U0688 - LOST IMS FROM THE MIX, CHECK WITH OPERATIONS ON STATUS.

U0775 - ISOLATION DEADLOCK - CONTENTION TRY RESTARTING 3 OR 4 TIMES, BEFORE CONTACTING CARDS ON CALL FOR THE JOB. 1 TIME IN 10,000 TOTAL MIX HAS CAUSED THE POOL TO BE FILLED MORE TIMES THAN NOT A PROGRAM HAS GONE BESERK, NOT CHECKPOINTING OR NOT CHECKPOINTING ENOUGH. LENGTH OF TIME TO BACK OUT SHOULD BE A POINTER TO THE PROBLEM JOB. U0777 - IMS CONTENTION/RESTART JOB LATER. U0811 - POINTER PROBLEM. U0844 - DATA BASE IS FULL, NOTIFY DBA. U0849 - NOT LISTED IN IMS MSG & CODES, BUT A RESTART CAN WORK - AN 849 ABEND IS CAUSED BY AN ILLEGAL DATASHARE OF A DATABASE. U0850 - DATA BASE ERROR, NOTIFY DBA. U0852 - DATABASE POINTERS OUT OF SYNC - CALL DBA ON CALL - TRY RESTART FIRST. U0999 - GENERALLY A RACF ABEND, BUT CHECK FOR OTHER MESSAGES IN OUTPUT. SG90214P FLAGS A U999, BUT IS ACTUALLY A B37 IN SAS STEP: SASB#001 EXEC SAS,SORT=300,WORK='999,999',OPTIONS= ETC. INCREASE SPACE SHOWN BELOW IN WORK PARM. SASB#001 EXEC SAS,SORT=300,WORK='1500,1500',OPTIONS= ETC. U0853 - DATA BASE ROOT PROBLEM/ (CC14533P RUNNING)?? TRY RESTARTING. U1003 - ??? U1035 - DCB=DBLKSIZE=___ NOT SPECIFIED ON A DUMMY DD STMT U1100 - CONTENTION. U1234 - ??? U1302 * ALL RECORDS WERE'NT RETURNED FROM SORT, TRY BIGGER REGION. 4096K O U1311 - POSSIBLE REGION SIZE ERROR - INCREASE REGION SIZE ON EXEC STATE. 4096K O U1320 - POSSIBLE REGION SIZE ERROR - INCREASE REGION SIZE ON EXEC STATE. 4096K O U1807 - CHECK FOR SQL CODE U2478 - SEVERAL JOBS ABENDED W/THIS 03/20/92, CAUSED BY TRANS PUTTING - MESSAGE ON QUEUING THAT HAD ONE LINE EOT. CAUSED TEMP STORAGE - TO FILL; RECOVERY TOKEN KEPT CHANGING. JASON BUTLER HAD TO - DELETE RECORD OFF QUEUING DATA BASE. U2486 - TO MANY WAITING PST'S (60 LIMIT) JUST RESTART JOB. U2860 - POINTER ERROR PER CHUCK WISE (04/15/90). KDF. U3300 - D/B PROBLEM, IRLM IS FULL, PROBABLY CAUSED BY ANOTHER JOB RUNNING AND NOT CHECKPOINTING ENOUGH. TRY RESTARTING. U3300 - (SEA-LAND) JOBNAME FOR THE JOB EXECUTING 'UTILWTOR'IS NOT ON - THE UTILWTOR TABLE IN PROD.CTLIB. U3303 - USUALLY DUE TO LOSING A CICS - RESTART THE STEP AFTER REGION UP. COULD INDICATE A STOPPED DATA BASE PER D. DAVIES. U3505 - TRYING TO CLOSE A CLOSED FILE OR OPEN AN OPENED FILE. U3601 - LIBRARY POINTED TO BY IMS DD STATEMENT COUNT NOT BE OPENED U3602 - BLDL REQUEST FAILED FOR THE SPECIFIED PSB. U3603 - REQUESTED PSB COULD NOT BE LOADED U3604 - ERROR WAS DETECTED DURING GSAM INITIALIZATION U3604 * MISSING DD NAME ON GSAM FILE. U3610 - THE COUNT FIELD IN THE USERS PARAMETER LIST IS INVALID U3611 - ADDRESS FOR GSAM,PCB IN USERS PARAMETER LIST INVALID U3612 - ERROR DETECTED DURING EXTENDED CHECKPOINT CALL PROCESSING U3613 - ERROR DETECTED DURING USERS CALL TO A GSAM DATABASE U3614 - ERROR WHILE PURGING GSAM BUFFERS DURING CHECKPOINT PROCESSING U3620 - ERROR IN RECURSIVE CALL TO CADDRPE DURING EXTENDED RESTART U3707 * CICS NOT AVAILABLE U3708 * NO THREADS AVAILABLE U3710 - BAD INPUT U3710 * CHECK SPIE AREA; SPIE 0007 DATA EXCEPTION SPIE M004 ADDRESS EXCEPTION SPIE 0001 PSB ERROR, USE WRONG PROC ON SHR/BTCH COMPILE U3714 - MIRROR TASK ABEND

* * * * * * U3717 * U3718 * U3723 *

ATCH- SYSTEM HUNG SO IT DUMPED PGM, TRY AGAIN AXFN- NO PGM GEN FOR PSB, OR USED PROD PSB IN TEST 775 - ENQUE FILE FULL 828 - INSERTING A DUPLICATE SECONDARY INDEX, DBA CAN FIX 844 - DATABASE IS FULL, CALL DBA 850 - DATABASE POINTERS ARE BAD, CALL DBA PCB NOT DEFINED IN PSB. NO FUNCTION CODE. REASON=801 PSB NOT IN ACB LIBRARY. REASON=805 PSB NOT SCHEDULED/ DB NOT AVAILABLE REASON=828 TRYING TO INSERT DUPLICATE SECONDARY INDEX REASON=8FF DLI NO ACTIVE. U3734 * INCREASE REGION U4015 - BAD GNP CALL (GET NEXT PARENT) ---------------------------------------------------------------------SYSCD - System codes ---------------------------------------------------------------------SA14-04 MAY BE CONTENTION - TRY RESTARTING ONCE ACCORDING TO INSTRUCTION SA78-10 MAY BE CONTENTION - TRY RESTARTING ONCE ACCORDING TO INSTRUCTION. SA0A * INACTIVE PGM OVERRIDES FREE AREA, AREA TO BE RELEASED OVERLAPS * A FREE AREA. * INITIATOR FAILURE. SB0A * COBOL - CONTROL PASSED BEYOND END OG PGM DUE TO INVALID PERFORM. SB14 * ERROR ATTEMPTING TO CLOSE A PDS OPENED FOR OUTPUT TO A MEMBER. * THE STOW ROUTINE, WHICH PLACES THE MEMBER NAME IN THE DIRECTORY FAILED BECAUSE NO SPACE WAS LEFT IN THE DIRECTORY OR THE NAME ALREADY EXISTS OR AN INCORRECTABLE I/O ERROR OCCURED. * AN ATTEMPT IS BEING MADE TO ALLOCATE A PDS AND ADD A MEMBER FROM AN INVALID COBOL COMPILATION. SB37 - SPACE - NEED TO INCREASE SPACE ON THE SORTED OUTPUT DATA SET. * ALSO CAN MEAN IT COULDNT FIND ENOUGH SPACE ON THE VOLUME TO * ALLOCATE THE 15 EXTENTS OF SECONDARY. * IF JOB HAS THIS TYPE OF JCL - EXEC SORT,REGION=2M,PARM='CORE= 500K',CYL=50, AND JOB FAILS WITH RC16, INCREASE SORT SIZE BY IN CYL=XX TO INCREASE THE SORT WORK SIZE. THERE WILL BE NO SORT WORKS IN THE JCL ITSELF TO INCREASE. * SOME DM* JOBS ALLOCATE SPACE IN KILOBYTES IE SPACE=(1,(1500,500)),AVGREC=K SC03 - USER FILE HAS NOT BEEN CLOSED, NOTIFY DESIGNER. * FILE STATUS=92 OPENED FILE, DIDNT READ, TRIED TO REWRITE. SC13 * ERROR DURING OPEN PROCESSING. AN I/O ERR WAS FOUND OR THE SVC * ROUTINE WAS UNABLE TO LOCATE A CONCATENATED PARTITIONED DATASET. * THIS COULD BE AN ATTEMPT TO OPEN CONCAT. PDS FOR OUTPUT. * IT COULD ALSO BE THE FORMAT 1 DSCB COULD NOT BE LOACTED IN THE * VTOC OF THE DASD REFERENCED. SC78 - NOT ENOUGH C-POOL AVAIL NOT ENOUGH VIR STORAGE AVAIL. SD00 * NEEDS LARGER REGION. SD37 * MORE SPACE NEEDED IN SPACE PARM. THERE WAS NO SECONDARY SPACE * SPECIFIED. SE37 - SPACE PROBLEM - IF DSN IS A FOCUS D/S - TRY COMPRESSING THE DSN THRU 3.1. * THIS RESULTS WHEN AN OUTPUT PDS FILLS UP ITS SPACE. IT ALSO * HAPPENS WHEN THE PDS CANT ACQUIRE ITS 15 EXTENTS ON ONE VOLUME. * A PDS CAN NOT SPAN MORE THAT ONE VOLUME. SFFF PROBABLE CONTENTION - RESTART JOB SF13 * A SUPERVISOR CAL (SVC) INSTRUCTION CONTAINED AN INVALID OPERAND * OR THE SVC INSTRUCTION CALLED WAS NOT INCLUDED IN THE OPERATING * SYSTEM. THIS OCCURS DURING OPEN PROCESSING. IT COULD BE A PDS * MEMBER COULD NOT BE FOUND, OR CONFLICTING OR MISSING DCB PARMS. * INVALID PARMS PASSED TO SUPERVISOR CALL ROUTINE. SF22 * I/O TIME ESTIMATE EXCEEDED.

SF2D * * SF37 * * * * * * S001 * * * * * * * * * * S001 * S001-1 S002 S002-OC * S013 * * * * * S013-18 * S013-20 S013-60 S016 S031 -

S03A S03B -

S03D -

S04E S062 S0B0 S0C1 * * *

OVERLAY SUPERVISOR - INVALID SUPERVISOR CALL BAD LOAD MODULE, RE-LINKEDIT MODULE. INPUT/OUTPUT ERR IN END-OF- VOLUME PROCESSING OR END-OF-VOLUME COULD NOT FIND A REQUIRED DATASET CONTROL BLOCK(DSCB). IT COULD BE NO DSCB COULD BE FOUND FOR A CONCATENATED DSN ON DASD, OR AN INVALID PARM WAS PASSED TO END-OF-VOLUME SVC (SVC 55). IT COULD ALSO BE AN I/O ERROR READING A FORMAT DSCB OR READING VOLUME LABEL ON THE SECOND VOLUME. I/O ERROR WRONG LENGTH RECORD OR PHYSICAL BLOCK NO END OF FILE MARKER ATTEMPT TO READ RECORD AFTER END-OF-FILE CONDITION FOUND HARDWARE ERROR TRIED TO WRITE ON AN INPUT FILE INCORRECT USE OF BLOCK CONTAINS CLAUSE - COBOL SECONDARY SPACE TO SMALL- (LIKE SB37) TAPE BEING READ IN WRONG DENSITY TRTCH PARM WAS WRONG RECFM V IS INCOMPATIBLE WITH TRTCH ET IF USING VSAM FILES IT COULD BE ONE OF THE FOLLOWING: 1) NO INVALID KEY CONDITION ON RANDOM PROCESSING. 2) KEY IS WRONG IN THE FD STATEMENT. WRONG RECORD LENGTH OR BLOCKSIZE. RECORD LENGTH--ALSO CHECK FOR SQL CODE IN OUTPUT. FILE BLOCKED TOO LARGE, EXCEEDS TRACK CAPACITY. WRONG RECFM OR BLOCKSIZE IN JCL CONFLICTING OR UNSUPPORTED PARAMETERS IN DCB BLOCKING IN PROGRAM=0; MUST HAVE BLOCKSIZE IN JCL. FILE LENGTH DIFFERENT THAN DEFINED IN PROGRAM MEMBER NAME SPECIFIED IN DD COULD NOT BE FOUND. NO BLKSIZE/DCB SPECIFIED FOR A DUMMY DD. ** WHEN EXECUTING IEBGENER WITH SYSUT1 IS DD DUMMY, FOLLOWED BY SYSUT2 CREATING NEW DS, THE DCB INFORMATION MUST BE IDENTICAL. JCL - TRIED TO CREATE A PDS WITHOUT ALLOCATING DIRECTORY BLOCKS CANNOT FIND FILE, MAYBE EXECUTING WRONG PGM. CANNOT FIND FILE LARGE, EXCEEDS TRACK CAPACITY BLKSIZE NOT A MULTIPLE OF LRECL OR WRONG DSN. NEED 'FB' IN DCB (RECFM=FB) SORT-X PGM; JCL DOES NOT CONTAIN SORT FIELDS I/O ERROR UNDER - PHYSICAL DAMAGE TO RECORDING MEDIUM INDEXED SEQUENTIAL - OUT OF SEQUENCE KEY WHEN LOADING AN ACCESS (QISAM) ISAM DATA SET - WRONG LENGTH RECORD OR BLOCK INCREASE REGION ERROR IN OPEN - DATA SET HAD NOT BEEN CREATED PROCESS FOR AN - DATA CONTROL BLOCK HAD NOT BEEN CLOSED INDEXED SEQUENTIAL AFTER DATA SET CREATED DATA SET - ERROR IN LRECL OR BLKSIZE ERROR IN OPEN - INDEXED SEQ ORGANIZATION NOT SPECIFIED PROCESS FOR AN IN DSORG OF DCB, REQUIRED EVEN IF INDEXED SEQUENTIAL SPECIFIED IN SOURCE PROGRAM DIRECT DATA SET - NOT ALL VOL-SER NUMBERS SPECIFIED OR INCORRECT SEQUENCE CONTENTION WITH ANOTHER JOB. - - - WHEN THE JOB IS A DB2 IMAGE COPY RESTART THE JOB FROM THE TOP ONLY WHEN THE MESSAGE AT THE BOTTOM OF OUTPUT READS RESOURCES UNAVAILABLE....JOYCE DILVER.... RETURN CODE EQUAL TO OR GREATER THAN VALUE OF NULL ARGUMENT PRODUCED I/O ERROR ON SYSTEM JOB QUEUE OPERATION EXCEPTION A MISSING OR MISSPELLED DD. DATASET WAS OPEN OR CLOSED WHEN AN INPUT/OUTPUT INSTRUCTION WAS ISSUED FOR IT. IT SHOULD HAVE BEEN THE OPPOSITE.

* * * * * * * * S0C2 * * * * * S0C4 * * * * * S0C5 * * * * * S0C6 * S0C7 * * * * * S0C8 S0C9 S0CA S0CB S0CC S0CD S0CE S0CF S0F1 S0F2 S0F3 S106

-

S106 * S117 S122 S137 *

BAD LOAD MODULE OR OBJECT DECK. FORTRAN- MISSING DIMENSION STATEMENT, SAME NAME FOR ARRAY AND A SUBROUTINE. COBOL- USING SORT VERB, DDNAME WAS NOT SORTOUT WHEN THE GIVING OPTION WAS USED. COBOL- SUBROUTINE PROG ID WAS THE SAME AS THE ENTRY NAME. COBOL- TRIED TO CALL WITHIN COBOL F SORT I/O PROCEDURE. COBOL- TRIED TO CALL A SUBROUTINE WHICH COULDNT BE FOUND. PRIVILEGED OPERATION EXCEPTION COBOL- MISSING PERIOD AT END OF PARAGRAPH OR PARAGRAPH NAMES. COBOL- MISSING GOBACK AFTER SORT VERB - LOGIC FELL INTO INPUT PROCEDURE. A MISSING OR MISSPELLED DD. DATASET WAS OPEN OR CLOSED WHEN AN INPUT/OUTPUT INSTRUCTION WAS ISSUED FOR IT. IT SHOULD HAVE BEEN THE OPPOSITE. PROTECTION EXCEPTION INDEXING (SUBSCRIPTING) OUTSIDE THE PGM'S ASSIGNED LIMITS. UNITIALIZED INDEX. A MISSING OR MISSPELLED DD. AN ATTEMPT TO READ AN UNOPEND INPUT FILE. BLOCKSIZE AND RECORD SIZE BEING SPECIFIED AS = FOR VARIABLE LENGTH RECORDS ADDRESSING EXCEPTION INDEXING (SUBSCRIPTING) OUTSIDE THE PGM'S ASSIGNED LIMITS. UNITIALIZED INDEX. A MISSING OR MISSPELLED DD. AN ATTEMPT TO CLOSE A DATASET A SECOND TIME. AN INPUT/OUTPUT INSTRUCTION TERMINATED BECAUSE OPEN WAS UNABLE TO COPLETE THE DCB. SPECIFICATION EXCEPTION AN ADDRESS DOES NOT SPECIFY THE BOUNDARY REQUIRED. DATA EXCEPTION- DATA WAS OF INCORRECT FORMAT FOR THE INSTRUCTION ATTEMPTING TO PROCESS IT. UNINITIALIZED INDEX OR SUBSCRIPT. FIELDS IN DECIMAL ARITHMETIC OVERLAP INCORRECTLY. INDEX/SUBSCRIPT VALUE INCORRECT AND INVALID DATA WAS REFERENCED. THE DECIMAL MULTIPLICAND HAS TOO MANY HIGH-ORDER SIGNIFICANT DIGITS. DATA FIELD WAS NOT INITIALIZED, BLANKS WERE READ INTO A FIELD DESIGNED TO BE PROCESSED WITH PACKED DECIMAL INSTRUCTIONS. FIXED POINT OVERFLOW EXCEPTION FIXED POINT DIVIDE EXCEPTION. INCREASING REGION TO 0M WORKED FOR GARY STRAITZ ON A JOB HE WAS RUNNING. DECMIAL OVERFLOW EXCEPTION DESTINATION FIELD TOO SMALL FOR RESULT DECIMAL DIVIDE EXCEPTION, QUOTIENT EXCEEDS SPECIFIED DATA FIELD SIZE. EXPONENT OVERFLOW EXCEPTION EXPONENT UNDERFLOW EXCEPTION SIGNIFICANCE EXCEPTION FLOATION POINT DIVIDE EXCEPTION DIVIDE BY ZERO

PGM IS IN PGMLIB BUT POINTERS ARE BAD. HAVE PGMR COMPILE IT IN TESTLIB AND PUT STEPLIB IN JCL TO PULL FROM TESTLIB. ERROR WHILE LOADING MODULE INTO MAIN STORAGE/NEEDS MORE CORE OR ADD REGION PARM TO JOB CARD OPERATOR CANCEL , REQUESTED DUMP I/O ERROR ERROR IN LABEL PROCESSING MULTI-VOLUME DATASET WITH INCONSISTENT LABELING.

* * S14F * S1E7 * S213 -

NO TRAILER LABELS OR TAPE MARKS EXISTS AT END OF DATA. LABEL FORMAT INCORRECT. CARD INPUT MISSING DSN DOES NOT MATCH THE DSN ON THE VOLUME REQUESTED DSCB NOT FOUND. I/O ERROR IN READING OR WRITING DSCB (DSCB=DATA SET CONTROL BLOCK) * THE FORMAT DSCB COULD NOT BE FOUND ON DASD. * DISP=OLD OR SHR FOR AN OUTPUT DSN. * SPACE PARM WAS NOT SPECIFIED. * DISP=MOD BUT THE DATA SET SHOULD REALLY BE NEW * DISP=NEW AND UNIT AFFINITY REQUESTED (UNIT=AFF=DDNAME) DEFERRED MOUNTING IS IMPLIED AND NO SPACE IS ALLOCATED. S214 - TAPE POSITIONING OR INVALID DISP - HARDWARE DEVICE DIFFICULTIES - BAD PHYSICAL SPOT ON RECORDING MEDIUM - NO TAPEMARK FOLLOWING DATA - DATA OBLITERATION S222 - OPERATOR CANCELED S228 - STORAGE VIOLATION - PROGRAM MIGHT HAVE BEEN COMPILED USING WRONG RMODE, AMODE. S237 - ERROR AT END OF VOLUME. S237-08 MAY BE CAUSED BY INTERNAL AND EXTERNAL TAPE LABEL NOT MATCHING, TRY WHATTAPE ON TAPE NUMBERS PRIOR AND RIGHT AFTER MISMATCHED TAPE. * BLOCK COUNT WRONG ON TRAILER LABEL. * VOL=SER SPECIFIED WRONG IN JCL. * TAPE BLOCK COUNT DIDNT AGREE WITH DCB BLOCK COUNT, POSSIBLE SKIPPED BLOCK DUE TO HARDWARE ERROR. S306 - THIS CAN HAPPEN IF A MEMBER GETS REMOVED FROM CICS LOADLIB SUCH AS CMSSGP.CICS.LOADLIB1 DAVE PADGETT CAN PUT THIS BACK ON THE APF LIST WITH A RESOLV COMMAND. CAN ALSO BE A RACF ABEND. (WILL SHOW MODULE XXXXXXXX NOT ACCESSED, USER UNAUTHORIZED. S314 - I/O ERROR READING DSCB. S322 - TIME OUT (CPU TIME LIMIT EXCEEDED), TRY ADDING TIME PARM 120 CPU MINUTES IS THE SYSTEM DEFAULT FOR EACH STEP IN A JOB. S400 - INVALID CONTROL - INVALID DCB PARAMETER BLOCK S413-08 I/O ERROR, RESTART JOB IN ABENDED STEP. * THE VOLUME COULDNT BE MOUNTED ON THE REQUESTED DEVICE. * THE VOLUME SERIAL # INCORRECT. * THE VOLUME SERIAL # WASNT SPECIFIED FOR AN INPUT DSN * VOLUME SEQUENCE # SPECIFIED IN CATLG OR JCL WAS GREATER THAN THE # OF VOLUMES CURRENTLY ALLOCATED TO THE DSN. S422 - JOB REQUIRED TOO MUCH SPACE IN SYSTEM JOB QUEUE. S437 - ERROR OCCURRED AT END OF VOLUME S428 - PSB AND REGION - IF PSB 'T' REGION = I003 INCOMPATIBLE - IF PSB 'P' REGION = I002 S513 - ERROR AT OPEN FOR TAPE DATA SET ON TAPE VOLUME. * ASSIGNMENT OF TWO DATASETS TO THE SAME TAPE DEVICE. S522 - TIME OUT (TASKS IN JOB STEP IN WAIT STATE DUE TO UNATTAINABLE RESOURCE E.G, PHYSICAL DEVICE, DATA SET, CPU) * PROGRAMMED TIMED OUT WAITING FOR TAPE MOUNT S606 - NOT ENOUGH MAIN STORAGE WAS AVAILABLE TO LOAD PROGRAM S60A * NEEDS MORE CORE S613 - TAPE OR CARTRIDGE POSITION ERROR * MISSING DCB . * DENSITY IS WRONG. * RECFM=F IN JCL WHEN FILE IS ACTUALLY FB S637 - I/O ERROR DURING END-OF-VOL; SEE SPECIFIC RETURN CODES IN IEC026I BOOK. * CONCATENATED DSNS HAVE UNLIKE ATTRIBUTES. I BOOK.

S706 -

THE REQUESTED LOAD MODULE WAS MARKED BY THE LINKAGE EDITOR AS NOT EXECUTABLE... S713 - ERROR DURING OPEN DUE TO EXPIRATION DATE VIOLATION. S714 - UNCORRECTABLE I/O ERROR OCCURRED IN TAPE LABEL PROCESSING (CRIMP IN TAPE, TAPE LABEL DESTROYED OR WRITTEN INCORRECTLY). S722 - TIMEOUT (OUTPUT LIMIT REACHED, JOB EXCEEDED NUMBER OF ALLOWABLE LINES) S737 - ERROR DURING END-OF VOLUME OR DURING ALLOCATION OF SECONDARY DASD SPACE AS REQUESTED IN SPACE PARM OF DD, POSSIBLY NEEDS MORE SPACE. * CONCATENATED DSN CANT BE FOUND. S755 - ENQUE FILE FULL - TOO MANY ENQUES (GET HOLD, ETC.) S775 - NO THREADS - SYSTEM SHUTTING DOWN -TRY LATER S80A - ERROR DURING GETMAIN - TRY INCREASING REGION PARM. 4096K OR 7M. 8M IS MAX BUT SHOULD EXERCISE CAUTION IN USING PER JOHN SHULTZ. 0 USES WHATEVER'S NEEDED, LIKE A 1440 PARM. S804 * NEEDS LARGER REGION SIZE. S806 - REQUESTED MODULE NOT FOUND / PROGRAM PROBLEM * MISSING STEPLIB OR JOBLIB CARD? * OBJECT PROGRAM NOT FOUND S813-04 TAPE MOUNTED DOES NOT HAVE DSN THAT THE JCL IS LOOKING FOR (COULD BE 2 TAPES WITH THE SAME INTERNAL NUMBER) S822 - REGION UNAVAILABLE (LIKE IN REGION=6M) - SYSTEM ERROR IN INITIATOR U11STEP (USUALLY IN CHANGE ACCUMS); REGION UNAVAILABLE, ERROR CODE=20 - TRY RESUBMITTING S837 - VOLUME COUNT PARM INSUFFICIENT VOL=(,,,10) (LABEL=TAPE,VOL=(,,,99) CAN SOMEONE EXPLAIN THE LABEL= TAPE PARM????? S850 USER ABEND ISSUED BY IMS. DATA BASE POINTER ERROR WHEN READING FROM A REGION NOT THE UPDATING REGION. CALL DBA. DATA BASE NEEDS TO BE DEALLOCATED AND REALLOCATED S678 - NEEDS REGION PARM ADDED ON JOB CARD (REGION=7M) S878 - VIRTUAL STORAGE REQUESTED NOT AVAILABLE. - TRY INCREASING REGION PARM. 4096K OR 7M. 8M IS MAX BUT SHOULD EXERCISE CAUTION IN USING PER JOHN SHULTZ. 0 USES WHATEVER'S NEEDED, LIKE A 1440 PARM. ADD REGION=4096K ON JOB CARD OR STEP. S90A * TRYING TO CLOSE A CLOSED FILE OR OPEN AN OPENED FILE. S913-38 ICH408I INSUFFICIENT AUTHORITY RACF ---------------------------------------------------------------------RETCD - Return codes ---------------------------------------------------------------------R/C 12 GENERIC ABEND, CHECK OUTPUT FOR SPECIFIC REASON, IE SB37, CONTENTION. R/C 12 DO A FIND ON SQL, IF SQLCODE=00000091J THIS IS A DEADLOCK AND THE JOB SHOULD BE RESTARTED PER THE XT-42 INSTRUCTIONS IF SQLCODE=00000090M CHECK WITH DATA BASE ABOUT ENABLE UTILITY AFTER THAT RESTART JOB PER XT-42 R/C 16 *

WHEN EXECUTING SYNCSORT,PARM='RC16=ABE' JOB WILL RETURN CODE 16. MAX TO BOTTOM TO SEE IF ABEND IS EXPLAINED. IF JOB HAS THIS TYPE OF JCL - EXEC SORT,REGION=2M,PARM='CORE= 500K',CYL=50, AND JOB FAILS WITH RC16, INCREASE SORT SIZE BY IN CYL=XX TO INCREASE THE SORT WORK SIZE. THERE WILL BE NO SORT WORKS IN THE JCL ITSELF TO INCREASE SPACE.

---------------------------------------------------------------------STACD - File status codes ---------------------------------------------------------------------I/O STATUS '35' -

DDNAME MISSING (COBOL II). I/O STATUS '37' CHECK FD RECORD LENGTH AGAINST DCB LENGTH (COBOL II). I/O STATUS '39' CHECK BLOCK CONTAINS CLAUSE IN FD (COBOL II). I/O STATUS '46' READ PAST END OF DATA ON FILE (COBOL II). I/O STATUS '47' READ AFTER FILE CLOSED (COBOL II). I/O STATUS '48' WRITING TO FILE OPENED AS INPUT. FILE STATUS '92' 1. ANY I/O REQUEST AGAINST A FILE THAT IS NOT OPEN. 2. ANY I/O REQUEST THAT IS NOT ALLOWED FOR THE OPTION THAT WAS SPECIFIED WITH THE OPEN STATEMENT. (I.E. READ A FILE OPENED AS AN OUTPUT OR REWRITE A FILE OPENED AS INPUT). 3. ANY WRITE OR REWRITE OF A RECORD WHOSE LENGTH IS GREATER THAN THE MAXIMUM SIZE SPECIFIED IN THE FD (DCB). 4. ANY ATTEMPTED ACTION ON A FILE AFTER END-OF-FILE CONDITION HAS OCCURED. ---------------------------------------------------------------------SQLCD - SQL return codes ---------------------------------------------------------------------NOTES: * IN DB2 RELATED JOBS, DO A FIND ON SQL SQL 100 - ROW NOT FOUND FOR FETCH--CONTACT PROGRAMMER, RETRY WON'T WORK. -203 - A REFERENCE TO COLUMN colum-name is AMBIGUOUS -204 - NAME IS UNDEFINED NANE -205 - column-name IS NOT A COLUMN OF TABLE table-name -501 - CURSOR IDENTIFIED IN FETCH OR CLOSE IS NOT OPEN -502 - CURSOR IDENTIFIED IN OPEN IS ALREADY OPEN -504 - THE CURSOR NAME cursor-name IS NOT DEFINED -803 - INSERT/UPDATE VALUES INVALID; CONTACT SYS DEV -805 - PROGRAM NOT FOUND; PROGRAM NOT BOUND AS PART OK PLAN NAME. CONTACT SYS DEV. 91J - DEADLOCK, RESTART; LIKE -911. 90M - STOPPED UTILITY, UTILITY IS ACTIVE; CK. IF IMAGE COPIES ARE RUNNING. RESTART AFTER IMAGE COPIES COMPLETE. -904 - DB2-TABLE IS DOWN CONTACT SYSTEM DEV. (RESOURCE UNAVAILABLE) OR CAN BE A TEMPORARY CONTENTION - RESTART LATER. -911 - RESOURCE CONTENTION, RESTART AFTER JOB CAUSING CONTENTION ENDS -913 - RESOURCE CONTENTION, RESTART AFTER JOB CAUSING CONTENTION ENDS -04E - DATA PROBLEM OR DB2 INTERNAL ERROR -818 - BIND PROBLEM, RELATED TO PRODUCTION UPDATES. -923 - DB2 CONNECTION DOWN, CHECK STATUS OF DB2 PRODUCTION -924 - DB2 CONNECTION INTERNAL ERROR = OPERATIONS CHECK SUBSYS DB2 CAF ERROR: DB2 CONNECTION LIMIT HAS BEEN REACHED = TOO MUCH RUNNING IN DB2; RESTART AFTER ANOTHER DB2 JOB ENDS ---------------------------------------------------------------------MISC - Miscellaneous codes and messages ---------------------------------------------------------------------PATTERN DSCB NOT FOUND IN VTOC -IF GDG WITH DISP=NEW,CATLG,DELETE, GDGMODEL MUST BE INCLUDED IN DCB= SUCH AS DCB=(GDGMODEL,RECFM=FB,ETC. NO PRIMARY VOLUME AVAILABLE MSG - NO VOLUME'S AVAILABLE WITH ENOUGH SPACE FOR RECALL. NO STORAGE VOL - VOL=PRIV ASSUMED - UNABLE TO ALLOCATE -- CHECK JCL FOR (SPGGRP,9); SPGGRP (OR OTHER ESOTERIC) MAY HAVE DECREASED NUMBER OF

VOLUMES.

SPGGRP HAD BEEN DECREASED TO 8 CAUSING THIS JCLERR.

ALLOCATION FAILED DUE TO DATA FACILITY SYSTEM ERROR IGD17273I ALLOCATION HAS FAILED FOR ALL VOLUMES SELECTED FOR DATA SET ..NAME IGD17277I THERE ARE (XX) CANDIDATE VOLUMES OF WHICH XX ARE ENABLED OR QUIESCED.. THIS IS BASICALLY THE SAME AS SPACE REQUESTED NOT AVAILABLE. TRY DECREASING SPACE ALLOCATION PER GENE WILL 02/10/91, AND LET JONES & CO KNOW OF THIS SORT OF ABEND DURING WORK HOURS UNLESS UNABLE TO RESOLVE. **UPDATE 06/15/91 - TO DD STATEMENT ADD STORCLAS=NONSMS, IE UNIT=SYSDA,STORCLAS=NONSMS,SPACE=(ETC), THEN CHANGE/ADD USER=TTSVDMP, PASSWORD=???????? TO JOB CARD TO RESTART PER JOHN SHULTZ. 01/11/92 - CHANGING TO UNIT=(SPGGRP,3) CAN WORK. KDF 03/21/92 - OR ADDING MORE SORTWORKS. KDF ---------------------------------------------------------------------CICSCD - CICS abend codes ---------------------------------------------------------------------ADCA - PSB MAY NOT BE IN SYNC WITH THE SOURCE PROGRAM CHECK THAT THE DATABASE BEING CALLED IS REFERENCED IN THE PSB. ADCC - HAVE SYSTEMS MANAGEMENT RECYCLE DBCTL IN THE REGION THAT THE ABEND IS OCCURRING. IF THIS FAILS THEN CALL TECH SUPPORT ADLA - POSSIBLY DATABASE FULL, CALL DBA. THIS IS A GENERAL IMS FILE REGION ABEND CODE. PROGRAMMER CAN PULL DUMP USING CICS TRANS SP31 WHERE TASK=CSM5 / ABEND=ADLA / REGION=FILE REGION REGISTER 1 WILL CONTAIN IMS ABEND CODE (IN HEX). CORRESPONDING CICS AZI6 DUMP WILL TELL WHICH DATA BASE. ADLC - PROGRAM TRIED TO ACCESS A DATABASE THAT IS DISABLED. ADLF - DL/I CALL MADE FOR A DATABASE, BUT THE LINK TO THE SYSTEM ON WHICH IT RESIDES IS DOWN, CALL DBA. ADLG - ERRORS IN THE DL/I ARGUMENT LIST. (VERIFY PCB IS SCHEDULED) AEIP - CICS INVREQ CONDITION - IF USING LOGICAL PAGING CHECK TO SEE IF A MAP W/O PAGING WAS SENT AFTER ACCUM PAGING INITIATED. AEIV - LENGERR - INVALID LENGTH ON SEND, RECEIVE, AND OTHER VERBS AEXT - DB2 NOT COMPILED WITH DL/I OPTION TURNED ON AEY9 - DB2 HAS COME DOWN AND BACK UP BUT HAS NOT BEEN RE-ATTACHED. TRY ATTACHING BY CODING: IN CICS4 - "DSNC STRT 5" AKCS - DEADLOCK TIMEOUT. AICA - RUNAWAY TASK CONDITION, POSSIBLE LOOP. APCT - REQUESTED MODULE CANNOT BE LOCATED IN THE PPT OR ENTRY DISABLED (MODULE NOT FOUND IN THE LOAD LIBRARY). ASRA - USUALLY DATA EXCEPTION ERROR. ATNI - CICS DECIDES IT NEEDS TO ABEND THE TRANSACTION. COULD BE: INCORRECT DEFINITION IN TCT. INVALID DATA STREAM FOR DEVICE TYPE. AZI2 - TOO MANY DATABASE CALLS, NOT TAKING CHECKPOINT (CHECK TO SEE IF IN LOOP WITH DL/I CALLS). AZI4 - INTERREGION COMMUNICATION REQUEST CAN NOT BE COMPLETED BECAUSE THE OTHER SYSTEM HAS BECOME UNAVAILABLE. AZI6 - TIME OUT, PROGRAM MAY BE IN A LOOP. ISRT WITH SECONDARY INDEX THAT EXISTS RATHER

1009 1011 APLC APLD APLE APLG -

APLI APLM APLS APLX -

THAN AN 'II' STATUS CODE. DATA BASE POINTER PROBLEM - INTER-REGION READ. RELATED TO BUFFERS. THIS IS A GENERAL ABEND CODE, OFTEN ACCOMPANIED BY AN ADLA ABEND FOR THE FILE REGION (SEE ADLA). COBOL 2 ABEND - WORKING STORAGE TOO LARGE, COB2 ALLOWS FOR VERY LARGE WS BUT CICS STILL LIMITS AT 64K. COBOL 2 ABEND - INDICATES USE OF ACCEPT, DISPLAY, ETC. INVALID VERB. SHARED LIBRARY FACILITIES ARE REQUIRED BY THE PROGRAM, BUT WERE NOT INCLUDED IN THE CICS SYSTEM DURING INITIALIZATION/INSTALLATION. ERROR DURING TRANSMISSION OF A RECORD TO THE CPLD QUEUE. ERROR DURING PL1 PROGRAM MANAGEMENT (EQUAL TO 4000 NON CICS ABEND) A GET STORAGE REQUEST TO THE STORAGE ALLOCATION ROUTINE SPECIFIED A SIZE > THAN CICS/OS/VS PERMITTED MAX (65,496) EITHER A BASED OR CONTROLLED VARIABLE THAT IS TOO LARGE IN AN ALLOCATE STMT, TOO MANY LARGE 'AUTOMATIC VARIALBES. ERROR DURING TRANSMISSION OF A RECORD TO THE CPLI QUEUE. NO MAIN PROCEDURE TERMINATION IS CAUSED BY THE 'ERROR' CONDITION, AND THE 'ERROR' CONDITION WAS NOT CAUSED BY AN ABEND (OTHER THAN AN ASRA ABEND). TOTAL POSSIBLE 'LIFO' STORAGE SEGMENTS HAVE BEEN EXHAUSTED. CHECK PROGRAM FOR LOOPS OR INCREASE THE 'ISASIZE' OR 'ISAINC'.

---------------------------------------------------------------------IMSCD - IMS abend codes ---------------------------------------------------------------------COMMOM ABENDS/REASONS ABEND REASON ---------------------------------------------S000 - 0260 TRYING TO CHKP WITHOUT PRIOR XRST - 0261 PSB OUT OF SYNC WITH PROGRAM - NOT ENOUGH GSAMS DEFINED IN PSB. (IN I004BMP OR I003BMP MAKE SURE PROGRAM IS COMPILED AS SHRBATCH NOT BATCH) - 0428 PSB NEEDS TO BE DEFINED IN THE IMS REGION - 0437 RACF ABEND ON A MESSAGE QUEUEING PROGRAM USING A PSB NAME THAT MATCHES THE PROGRAM NAME. (JCL MUST CONTAIN "AGN=AGPAMS4" ON THE EXEC CARD) - 0456 PSB NEEDS TO BE RESTARTED AFTER PRIOR ABEND OR PSB NOT FOUND (FOR TEST CHECK DB15563P FOR TEST PSB JOB THAT SHOULD RUN AT 10, 12, 2 AND 4) - 0474 OPERATOR CANCEL - 0476 PSB ERROR - PROGRAM NOT COMPILED AS SHRBATCH - REFERING TO -SC NOT -PCB IN CALL - 0688 CTL PROGRAM NOT ACTIVE; CHECK IF EXECUTING WRONG IMS (EX, I002BMP IN CLASS J) - 0805 PSB NOT SCHEDULED/A DATA BASE IS NOT AVAILABLE - 0811 BAD DATA BASE POINTERS - CONTACT DBA

- 0844 - 0849 - 0850 - 3303

3042 -

3601 3602 3603 3604 3610 3611 3612 3613 3614 3620

-

3707 3710 3711 -

0101 0102

3714 3717 -

AXFN ADLF DFH2 775 828 ADLA/844 850 852 853 913

3723 -

801 803 805 806

0001 0004 0007

- 828 4036 S322 S522 S722 S878 S1320

-

DATA BASE IS FULL CALL WITH 'GO' ON SEGMENT THAT HAS BEEN PREVIOUSLY RETRIEVED BUT NOT COMMITED. DATA INTEGRITY NOT INSURED. INTER-REGION DATA BASE BUFFER PROBLEM SIMILAR TO 0805. DATA BASE OFFLINE IN IMS - DATA SHARING DATA BASE MAY STILL BE AVAILABLE IN ONLINE REGION. RUNNING INVALID PROC IN JCL (EXAMPLE TRYING TO EXECUTE DB2 IN PROC THAT DOES NOT SUPPORT IT OR TRYING TO EXECUTE BMP PROC FOR DB2) LIB POINTED TO BY IMS DD COULD NOT OPEN BLDL REQUEST FAILED FOR PSB REQUESTED PSB COULD NOT BE LOADED MISSING DDNAME ON GSAM FILE LOOK AT YOUR RESTART GSAM PSB IN USER LIST INVALID ERROR DURING EXTENDED CHKPT CALL ERROR DURING USER CALL TO GSAM DATABASE ERROR DURING PURGING GSAM BUFFERS AT CHKPT ERROR IN A RECURSIVE CALL TO CADDRPE DURING EXTENDED RESTART CICSXXX NOT AVAILABLE CLASS NOT = J FOR TEST SHARE BATCH CLASS NOT = K FOR PROD SHARE BATCH SAVEAREA TOO SMALL NO RESTART RECORD - DELETE CC505 ABEND WITH USER CODE, CHECK SPIE AREA PSB ERROR; WRONG PROC OR COMPILE ADDRESS EXCEPTION DATA EXCEPTION CICS NOT UP 'KILLER' PROGRAM - NEED MORE CHKPTS NO PROGRAM GEN OR TEST PSB CICS FILE REGION IS DOWN POSSIBLE CHKPT QUEUE CONTENTION ENQUE FILE FULL INSERTING DUPLICATE SECONDARY INDEX DATABASE FULL, CHECK SECONDARY INDEX BAD DATA BASE POINTERS BAD DATA BASE POINTERS INDEX POINTER PROBLEM INSUFFICIENT ACCESS PCB NOT DEFINED IN PSB OR INVALID DLI ARGUMENT LIST. CHECK 'LANG' PARM IN JCL CHECK LANGUAGE PARAMETER IN CICS SHARED BATCH PROC. REMEMBER DEFAULT IS PL/1. PSB NOT IN TABLES PSB ALREADY SCHEDULED PSB NOT IN ACBLIB OR DATA BASE OFFLINE PROGRAM NOT IN TEST LOAD LIB. CHECK 'MBR=' AND RECOMPILE. INSERTING DUPLICATE SECONDARY INDEX. INVALID LANG PARM IN JCL - PROGRAM IS PL/I, LANG PARM IS 'C'. EXCEEDS TIME PARAMETER OPERATOR DID NOT MOUNT TAPE ON TIME. OUTLIM EXCEEDED NEED TO INCREASE CORE. BLOW UP TAKING CHKPT, NEED MORE REGION

U0102 U0437 -

U0456 -

U0688 U1904 -

RESTART FAILED BECAUSE IMS CANNOT FIND RESTART INFO ASSOCIATED WITH CHECKPOINT ID. CHECK FOR LOW-VALUES IN RESTART RECORD. APPLICATION GROUP NAME OR RESOURCES SPECIFIED ARE NOT VALID FOR DEPENDENT REGION * MAY NEED 'AGN=' PARAMETER, SEE MEMBER '#RACF'. PSB NEEDS TO BE RESTARTED - SCHEDULING FOR TEST PSBS RUNNING IN IMS3 (USING PROC I003BMP OR I003DB2), GET INTO DBAE IN TSO, USE OPTION STARTPSB. OR PSB NOT NEW COPIED IN IMS (FOR TEST CHECK DB15563P FOR TEST PSB JOB THAT SHOULD RUN AT 10, 12, 2 AND 4) RUNNING 2 REGIONS IN 1 JOB. CHKPT UTILITY RECORD NOT CREATED