Magicube.pdf
This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA
Overview
Download & View Magicube.pdf as PDF for free.
More details
- Words: 541
- Pages: 3
Magic Cube Rose by Valerie Vann
Diagrammed by Joel Sampson
Part 1: Leaf Modules x3
1.
Start with the white side up. Fold in half and then unfold.
2.
3.
Fold the outside edges into the centre crease then unfold.
5. Bring Point A down to point B, folding along the crease shown. Then
6. Rotate model 180 , then fold top left corner o
fold left side in, along crease shown
4.
Fold the top right corner down to the crease shown, then unfold.
down along crease shown.
Fold the bottom left corner up to the crease shown.
7.
fold top triangle down along crease shown.
A
B
8.
Fold point A up to point B inside of the model.
9.
Fold top layer along the creases shown, bringing point A down to point B and bringing the left side inwards at the same time.
10.
Turn over and fold the bottom triangle upwards along crease shown.
11.
Fold the bottom and the top along the creases shown, then unfold.
A B
B A
You will need to make 3 of these modules
Magic Cube Rose by Valerie Vann
Diagrammed by Joel Sampson
Part 2: Petal Modules x3
1.
Start with the white side up. Fold in half and then unfold.
2.
Fold the outside edges into the centre crease then unfold.
5. Bring Point A down to point B, folding along the crease shown. Then fold left side in, along crease shown.
3.
Fold the top right corner down to the crease shown, then unfold.
4.
Fold the bottom left corner up to the crease shown.
6. Rotate model 180 , and fold left side of model along crease shown. Then bring point A o
up to point B inside the model.
A B
B A
7.
Fold top layer along the creases shown, bringing point A down to point B and bringing the left side inwards at the same time.
8.
Turn over and fold the two white triangles along the creases shown.
9.
Fold the bottom and the top along the creases shown, then unfold.
A
B
You will need to make 3 of these modules
Magic Cube Rose by Valerie Vann
Diagrammed by Joel Sampson
Part 3: Joining the 6 modules
1.
Insert the triangular end of one module into the opening of another as shown
2.
Join the other module to the other 2 by inserting the triangular end, and then inserting the end of the 1st module into the last. Follow the arrows
3.
Inside View of the joined modules. They should look like they form the corner of a cube...
Inside View
4.
For the pink modules: Insert the triangular end of one module into the opening of another as shown
5.
Join the other module to the other 2 by inserting the triangular end, and then inserting the end of the 1st module into the last
6.
Outside view of the joined pink modules.
Outside View
7.
Now insert the pink group into the green group. Follow the arrows.
8.
It’s Magic!! To open up the rose, slowly work the pink petals out from the 3 diagonal joins and the centre, and you can open up the leaves too if you wish.
Diagrammed by Joel Sampson
Part 1: Leaf Modules x3
1.
Start with the white side up. Fold in half and then unfold.
2.
3.
Fold the outside edges into the centre crease then unfold.
5. Bring Point A down to point B, folding along the crease shown. Then
6. Rotate model 180 , then fold top left corner o
fold left side in, along crease shown
4.
Fold the top right corner down to the crease shown, then unfold.
down along crease shown.
Fold the bottom left corner up to the crease shown.
7.
fold top triangle down along crease shown.
A
B
8.
Fold point A up to point B inside of the model.
9.
Fold top layer along the creases shown, bringing point A down to point B and bringing the left side inwards at the same time.
10.
Turn over and fold the bottom triangle upwards along crease shown.
11.
Fold the bottom and the top along the creases shown, then unfold.
A B
B A
You will need to make 3 of these modules
Magic Cube Rose by Valerie Vann
Diagrammed by Joel Sampson
Part 2: Petal Modules x3
1.
Start with the white side up. Fold in half and then unfold.
2.
Fold the outside edges into the centre crease then unfold.
5. Bring Point A down to point B, folding along the crease shown. Then fold left side in, along crease shown.
3.
Fold the top right corner down to the crease shown, then unfold.
4.
Fold the bottom left corner up to the crease shown.
6. Rotate model 180 , and fold left side of model along crease shown. Then bring point A o
up to point B inside the model.
A B
B A
7.
Fold top layer along the creases shown, bringing point A down to point B and bringing the left side inwards at the same time.
8.
Turn over and fold the two white triangles along the creases shown.
9.
Fold the bottom and the top along the creases shown, then unfold.
A
B
You will need to make 3 of these modules
Magic Cube Rose by Valerie Vann
Diagrammed by Joel Sampson
Part 3: Joining the 6 modules
1.
Insert the triangular end of one module into the opening of another as shown
2.
Join the other module to the other 2 by inserting the triangular end, and then inserting the end of the 1st module into the last. Follow the arrows
3.
Inside View of the joined modules. They should look like they form the corner of a cube...
Inside View
4.
For the pink modules: Insert the triangular end of one module into the opening of another as shown
5.
Join the other module to the other 2 by inserting the triangular end, and then inserting the end of the 1st module into the last
6.
Outside view of the joined pink modules.
Outside View
7.
Now insert the pink group into the green group. Follow the arrows.
8.
It’s Magic!! To open up the rose, slowly work the pink petals out from the 3 diagonal joins and the centre, and you can open up the leaves too if you wish.
More Documents from "Ignacio Railef"
Dossier Titeres.pdf
June 2020 0
Magicube.pdf
June 2020 0
Samurai-sombrero.pdf
June 2020 10
Seguridad Investigacion.docx
November 2019 36
