Technical Description Hydraulic Excavator
A 914 litronic`
Operating weight 39680 – 46520 lb Engine output 112 kW (152 HP) Bucket capacity 0.39 – 1.83 cuyd
The Better Machine.
Engine Rating per ISO 9249 ______________ Model __________________________________ Type ____________________________________ Bore/stroke ____________________ Displacement ________________ Engine operation __________________
Cooling system Air cleaner
____________________
__________________________
Fuel tank ____________________________ Engine idling ______________________ Electrical system Voltage __________________________ Batteries ________________________ Starter ____________________________ Alternator ______________________
Swing Drive 112 kW (152 HP) at 2000 1/min Liebherr D 924 T-E 4 cylinder in-line 4.8/5.6” 1.74 gal 4-stroke diesel direct injection turbo-charged reduced emissions water radiator with integrated engine oil cooler dry-type air cleaner with pre-cleaner, primary and safety elements 95 gal sensor controlled 24 V 2 x 110 Ah/12 V 24 V/5.4 kW 24 V/55 A
Drive
______________________________
Transmission
__________________
Swing ring ______________________ Swing speed __________________ Swing torque __________________ Holding brake ________________ Option ____________________________
Operator’s Cab Cab
________________________________
Operator’s seat
______________
Joysticks ________________________ Monitoring ____________________
Hydraulic System Hydraulic pump ____________________ Liebherr, variable displacement, swashplate pump Max. flow ______________________ 2 x 53 gal/min ________ Max. hydr. pressure 5075 PSI Hydraulic pump __________ regulation and control Liebherr-Synchro-Comfort-system (LSC) with electronic engine speed sensing regulation, pressure and flow compensation, load sensing and torque controlled swing drive priority Hydraulic tank capacity ________ 61 gal Hydraulic system capacity ____ max. 116 gal Filtration ____________________________ one main return filter with integrated partial micro filtration (5 mm) Cooling ________________________________ combined with engine radiator; thermostatically controlled Modes ________________________________ four fixed modes, can also be adjusted by the operator to adjust engine and hydraulic performance to match job conditions (Note: All modes provide full max. power) ______________________________ LIFT for precise lifting tasks ____________________________ FINE for precision work at high speed i.e. grading ______________________________ ECO for most economic performance at best environmental conditions POWER ________________________ for max. output Super-Finish ________________________ additional operator adjustable work speed function for further increased feathering. Applies to all modes and all control functions R.P.M. adjustments ______________ stepless adjustment of engine output via the r.p.m. at each selected mode Add on circuits ____________________ four preadjustable pump flows for add on tools
Hydraulic Controls Power distribution
________________
via control valve with integrated safety valves, simultaneous and independent operation of travel drive, swing drive and work attachment
Control type Attachment and swing ____ proportional via joystick levers Travel ____________________________ proportional via foot pedal Additional functions ____________ via switch and/or proportional foot pedals
Technical Data 2
Liebherr swashplate motor with integrated control valve and torque control Liebherr compact planetary reduction gear Liebherr sealed single race ball bearing swing ring, internal teeth 0 – 8.0 R.P.M. 66 kNm wet discs (spring applied – pressure released) pedal controlled positioning brake
Heater/airconditioner Noise emission (86/662/CEE)
______
______________
built from deep drawn components, resiliently mounted, sound insulated, tinted windows, front window stores overhead, door with sliding window fully adjustable, shockabsorbing suspension, adjustable to operator’s weight and size, 6-way adjustable seat integrated into adjustable seat consoles menu driven query of current operating conditions via the LCD display. Automatic monitoring, display, warning (acoustical and optical signal) and saving machine data, for example, engine overheating, low engine oil pressure or low hydraulic oil level combined hotwater/airconditioner with dust filter for fresh or circulated airflow LpA (inside cab) = 75 dB(A) LwA (surround noise) = 103 dB(A)
Undercarriage Drive
______________________________
Transmission
__________________
Travel speed
__________________
Drawbar pull __________________ Axles ____________________________ Brakes
__________________________
Stabilization
__________________
variable flow swashplate motor with automatic brake valve oversized two speed power shift transmission with additional creeper speed 0 – 1.6 mph (creeper speed off road) 0 – 3.1 mph (off road) 0 – 5.6 mph (creeper speed on road) 0 – 12.4 mph (road travel) 0 – 18.6 mph “Speeder” (option) 120 kN 88200 lb excavator axles; automatic or operator controlled front axle oscillation lock wet, maintenance-free multi disc brakes act as travel brakes or digging locks. Spring applied/pressure released parking brake integrated into gearbox 2 point outriggers, prop up blade (adjustable during travel for dozing) prop up blade + 2 pt. outriggers 4 point outriggers
Attachment Type
______________________________
Hydraulic cylinders
________
Pivots ____________________________ Lubrication ____________________ Hydraulic connections ____ Bucket
__________________________
combination of resistant steel plates and cast steel components Liebherr cylinders with special seal system. Shock absorption sealed, low maintenance centralized in easily accessible locations pipes and hoses equipped with SAE splitflange connections standard equipped with 26500 lb safety hook for lifting
X E A
D
C
W H K Q M
N
L U
B T
Z V
Tires 10.00-20
Z
Z
K I M
K Q
Q
J
M
N
L U
N
B
L
B
S
U
T
Z
K J
Q
I P
A B C D E H I J K L M N P Q S T U Z Z*
M
N
B
L
S
U
T
with prop up blade
with 2 point outriggers
ft-in 8– 2 8– 2 10– 6 8– 8 9– 1 8– 3 1– 4 1– 8 4– 3 9– 0 4– 1 4– 7 – 1– 2 8– 2 – 16– 1 16– 1 16– 1
ft-in 8– 2 8– 2 10– 6 8– 8 9– 1 8– 3 – – 4– 3 9– 0 4– 1 3– 5 – 1– 2 – 13– 2 41– 8 16– 1 16– 1
with prop up blade and 2 point outriggers ft-in 8– 2 8– 2 10– 6 8– 8 9– 1 8– 3 1– 4 1– 8 4– 3 9– 0 4– 1 3– 5 5– 1 1– 2 8– 2 13– 2 17– 3 17– 3 16– 2
E = tail radius
with 4 point outriggers ft-in 8– 2 8– 2 10– 6 8– 8 9– 1 8– 3 – – 4– 3 9– 0 4– 1 3– 5 – 1– 2 – 13– 2 16– 4 17– 3 16– 2
Stick
ft-in 5–11 6–10 7–10 9–10 12– 1
with hydr. adjustable boom with gooseneck boom and and and 4 pt. and and and 4 pt. prop 2 pt. outr. or prop 2 pt. outr. or up outr. blade + 2 pt. up outr. blade + 2 pt. blade outr. blade outr. ft-in ft-in ft-in ft-in ft-in ft-in 23– 5 23– 5 23– 5 20– 6 20– 6 20– 6 21– 0 21– 0 21– 0 18–10 18–10 20– 0* 20– 4 20– 4 20– 4 18– 8 18– 8 20– 2* 19– 0 19– 0 20– 2* 19– 6 19– 6 21– 4* 19– 6 19– 6 21– 7* 19–10 19–10 18– 8*
W
5–11 6–10 7–10 9–10 12– 1
10– 10– 10– 10– 12–
X
5–11 6–10 7–10 9–10 12– 1
30– 8 30– 6 30– 8 30– 8 29–10
V
4 0 2 8 7
10– 10– 10– 10– 12–
4 0 2 8 7
10– 10– 10– 10– 13–
4 0 2 8* 5*
10– 8 10– 4 10–11 12– 9 14– 5
10– 8 10– 4 10–11 12– 9 14– 5
10– 8 10– 4* 10–11* 12–11* 14– 9*
30– 8 30– 6 30– 8 30– 8 29–10
30– 30– 30– 31– 30–
8 6 8 9* 8*
29– 28– 29– 28– 27–
29– 28– 29– 28– 27–
29– 0 30– 0* 30– 2* 29–10* 28– 8*
0 8 0 8 8
0 8 0 8 8
Dimensions are with attachment over steering axle * Attachment over digging axle for better transport dimensions
Dimensions 3
Digging envelope ft 35
1 2 3 4 5
m 11 10
30
5
Stick length Max. digging depth Max. reach at ground level Max. dumping height Max. teeth height
4
Max. digging force
3
Max. breakout force
8 7 6
15 10
5’11” 6’10” 7’10” 9’10” 12’ 1”
9
25 20
stick stick stick stick stick
2 5
5-11 16-10
6-10 17-10
7-10 18-10
9-10 20-10
12- 1 23- 1
ft-in ft-in ft-in
28- 0 19- 8 31- 5
28-10 22-11 31-11
29-10 23- 9 32- 7
31- 7 24-11 33- 9
33-11 26- 5 35- 3
kN lb kN lb
148.7 33520 160 35940
125.9 28220 160 35940
115.3 38700 160 35940
98.7 22050 160 35940
84.6 18960 160 35940
Max. breakout force with ripper bucket:
1 0
ft-in ft-in
169 kN (38150 lb)
0 -1
-5 -2 -10
-3 -4
-15 -20 -25
-5 -6
1 2 3 4
-7
5
-8 11 10
9
35
30
8
7 25
6 20
5 15
4
Operating weight The operating weight includes basic machine with 8 tires plus spacer rings, hydr. adjustable boom, 6’10” stick and 1.05 cuyd bucket. 3
10
2
1
0 m
Undercarriage versions A 914 litronic` with prop up blade A 914 litronic` with 2 pt. outriggers A 914 litronic` with prop up blade + 2 pt. outr. A 914 litronic` with 4 pt. outriggers
0 ft
5
lb 41670 42780 45200 45860
Buckets Cutting width SAE Capacity SAE (heaped) Max. material weight Weights Standard bucket with Liebherr teeth Z 13 C Bucket with cutting edge HD bucket with Liebherr teeth Z 16 C3) Bucket with ejector and Bofors-teeth Stabilizers raised Prop up blade down 2 point outriggers down Prop up blade + 2 pt. outr. down 4 point outriggers down 1) 2) 3)
in cuyd lb/cuyd
151) 0.39 3000
171) 0.45 3000
19 0.52 3000
24 0.45 3000
242) 0.39 3000
26 0.52 3000
33 0.78 3000
41 1.05 3000
49 1.30 3000
55 1.57 2500
55 1.83 2000
lb lb
– –
– –
– –
1080 1060
– –
1210 1190
1410 1390
1320 1570
1500 1760
1920 1900
2050 –
lb
–
–
–
1460
1870
1390
1630
1830
2090
2230
–
lb
820 860 For machine 12–2 12–2 12–2 12–2 12–2 12–2 12–2 12–2 12–2 12–2
ft-in ft-in ft-in ft-in ft-in
900 – – – – – – – – stability per ISO 10567 the max. stick length is: 12–2 12–2 12–2 12–2 7–10 5–11 – – – 12–2 12–2 12–2 12–2 12– 2 7–10 – – – 12–2 12–2 12–2 12–2 12– 2 12– 2 7–10 7–10 6–10 12–2 12–2 12–2 12–2 12– 2 12– 2 12– 2 12– 2 12– 2 12–2 12–2 12–2 12–2 12– 2 12– 2 12– 2 12– 2 12– 2
max. digging depth 4’7”, since bucket suspension is wider than bucket Ripper bucket with Liebherr-teeth Z 16 P It is recommended to use these buckets only with 4 point outriggers down
Backhoe Attachment with Hydr. Adjustable Boom 4
with stick 6’10”
with stick 7’10”
Height Undercarriage Radius of load from centerline of machine in ft ft 10 15 20 25
Height Undercarriage Radius of load from centerline of machine in ft ft 10 15 20 25
20
15
10
5
0
– 5
– 10
– 15
Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down
16.1 (23.2+) 18.0 (23.2+) 23.0 (23.2+) 23.2+ (23.2+) 23.2+ (23.2+) 15.9 (22.0+) 17.8 (22.0+) 22.0+ (22.0+) 22.0+ (22.0+) 22.0+ (22.0+) 15.9 (27.5 h ) 17.8 (27.5 h ) 21.7 (27.5 h ) 27.5 h (27.5 h ) 27.5 h (27.5 h ) 15.2 (29.9+) 17.1 (33.6+) 23.2 (33.6+) 29.9 (33.6+) 33.6+ (33.6+) 14.4 (30.4 ) 16.2 (38.0+) 22.2 (38.0+) 30.5 (38.0+) 38.0+ (38.0+) 14.2 (30.2 ) 16.1 (39.4+) 22.0 (39.4+) 30.3 (39.4+) 39.4+ (39.4+) 15.0 (30.9+) 17.1 (30.9+) 23.9 (30.9+) 30.9+ (30.9+) 30.9+ (30.9+)
9.7 (14.7+) 10.6 (14.7+) 13.6 (14.7+) 14.7+ (14.7+) 14.7+ (14.7+) 9.1 (15.8 ) 10.1 (16.3+) 13.0 (16.3+) 16.0 (16.3+) 16.3+ (16.3+) 8.8 (15.2 ) 9.8 (19.9+) 12.7 (19.9+) 15.4 (19.9+) 19.9+ (19.9+) 8.8 (15.2 ) 9.8 (22.7+) 12.7 (22.7+) 15.4 (22.7+) 20.0 (22.7+) 8.6 (15.9 ) 9.5 (23.8+) 12.4 (23.8+) 16.1 (23.8+) 20.6 (23.8+) 8.1 (15.4 ) 9.0 (24.2+) 11.9 (24.2+) 15.7 (24.2+) 21.6 (24.2+) 7.2 (14.4 ) 8.1 (24.6+) 11.0 (24.6+) 14.6 (24.6+) 20.7 (24.6+)
6.4 (10.9 h ) 7.1 (13.7+) 9.1 (13.7+) 10.9 (13.7+) 13.7+ (13.7+) 6.0 (10.4+) 6.6 (14.1+) 8.5 (14.1+) 10.5 (14.1+) 13.7 (14.1+) 6.4 (10.3+) 7.1 (15.4+) 9.1 (15.4+) 10.4 (15.4+) 13.3 (15.4+) 6.2 (11.1+) 6.9 (16.9+) 8.9 (16.3 ) 11.1 (16.9+) 13.2 (16.9+) 5.4 (10.1 ) 6.0 (17.4+) 7.9 (16.6 ) 10.3 (17.4+) 14.0 (17.4+) 4.6 ( 9.1 ) 5.2 (17.8+) 7.0 (16.8 ) 9.3 (17.8+) 12.9 (17.8+) 4.6 ( 9.4 ) 5.2 (15.6+) 7.1 (15.6+) 9.6 (15.6+) 13.4 (15.6+)
20 3.7 ( 7.2 ) 4.2 (11.1 h ) 5.6 (11.1 h ) 7.4 (11.1 h ) 10.0 (11.1 h ) 3.3 ( 6.7 ) 3.7 (12.6 ) 5.1 (11.5 ) 6.8 (12.6 h ) 9.3 (12.6 h ) 3.2 ( 6.6 ) 3.6 (12.4 ) 5.0 (11.8 ) 6.8 (13.4+) 9.3 (13.1 ) 3.2 ( 6.7 ) 3.7 (13.3 ) 5.1 (12.1 ) 6.9 (14.2+) 9.5 (14.0 )
15
10
5
0
– 5
– 10
– 15
Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down
16.6 (22.8+) 18.6 (22.8+) 22.8+ (22.8+) 22.8+ (22.8+) 22.8+ (22.8+) 15.0 (21.9+) 16.9 (21.9+) 21.9+ (21.9+) 21.9+ (21.9+) 21.9+ (21.9+) 15.6 (26.7+) 17.5 (26.7+) 21.5 (26.7+) 26.7+ (26.7+) 26.7+ (26.7+) 15.2 (29.2 ) 17.1 (31.3+) 23.0 (31.3+) 29.4 (31.3+) 31.3+ (31.3+) 14.2 (30.3 ) 16.1 (37.7+) 22.1 (37.7+) 30.4 (37.7+) 37.7+ (37.7+) 14.0 (30.0 ) 15.9 (38.6+) 21.8 (38.6+) 30.1 (38.6+) 38.6+ (38.6+) 13.0 (28.7 ) 14.8 (29.7+) 20.7 (29.7+) 28.9 (29.7+) 29.7+ (29.7+)
9.7 (14.4+) 10.6 (14.4+) 13.6 (14.4+) 14.4+ (14.4+) 14.4+ (14.4+) 9.1 (15.3+) 10.0 (15.3+) 13.0 (15.3+) 15.3+ (15.3+) 15.3+ (15.3+) 8.7 (14.8 ) 9.7 (18.6+) 12.6 (18.6+) 15.0 (18.6+) 18.6+ (18.6+) 8.7 (14.6 ) 9.7 (21.9+) 12.6 (21.9+) 14.8 (21.9+) 19.9 (21.9+) 8.5 (15.2 ) 9.4 (23.7+) 12.4 (23.7+) 15.4 (23.7+) 20.5 (23.7+) 7.9 (15.2 ) 8.8 (23.9+) 11.7 (23.9+) 15.4 (23.9+) 20.9 (23.9+) 7.5 (15.0 ) 8.5 (25.3+) 11.4 (25.3+) 15.2 (25.3+) 21.5 (25.3+) 6.6 (13.7 ) 7.5 (15.0+) 10.3 (15.0+) 14.0 (15.0+) 15.0+ (15.0+)
5.9 (10.5 ) 6.6 (12.7+) 8.4 (12.7+) 10.7 (12.7+) 12.7+ (12.7+) 5.8 (10.2 ) 6.4 (13.4+) 8.3 (13.4+) 10.4 (13.4+) 13.4+ (13.4+) 5.7 ( 9.9 ) 6.3 (14.8+) 8.2 (14.8+) 10.0 (14.8+) 13.1 (14.8+) 5.8 ( 9.9 ) 6.5 (16.3+) 8.4 (16.1 ) 10.1 (16.3+) 13.0 (16.3+) 5.9 (10.9 ) 6.6 (17.1+) 8.6 (16.5+) 11.1 (17.1+) 13.4 (17.1+) 4.6 ( 9.2 ) 5.2 (17.4+) 7.0 (16.8 ) 9.4 (17.4+) 12.9 (17.4+) 4.4 ( 9.1 ) 5.0 (17.1+) 6.9 (17.1+) 9.3 (17.1+) 13.0 (17.1+)
3.5 4.0 5.4 7.1 9.1 h 3.7 4.2 5.6 7.4 9.4 h 3.3 3.8 5.1 6.8 9.4 3.2 3.6 5.0 6.8 9.3 3.2 3.6 5.1 6.8 9.4 2.7 3.2 4.6 6.3 8.8
( 7.0 ) ( 9.1 h ) ( 9.1 h ) ( 9.1 h ) ( 9.1 h ) ( 7.2 ) ( 9.4 h ) ( 9.4 h ) ( 9.4 h ) ( 9.4 h ) ( 6.7 ) (12.5 ) (11.4 ) (12.7+) (12.7+) ( 6.6 ) (12.3 ) (11.2 ) (13.2+) (13.0+) ( 6.7 ) (12.1 ) (12.1 ) (13.2+) (12.8 ) ( 6.1 ) (12.5 ) (11.3 ) (12.6+) (12.6+)
with stick 9’10”
with stick 12’1”
Height Undercarriage Radius of load from centerline of machine in ft ft 10 15 20 25
Height Undercarriage Radius of load from centerline of machine in ft ft 10 15 20 25 30
20
15
10
5
0
– 5
– 10
– 15
Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down
16.9 (22.6+) 18.9 (22.6+) 22.6+ (22.6+) 22.6+ (22.6+) 22.6+ (22.6+) 15.1 (22.2+) 17.0 (22.2+) 22.1 (22.2+) 22.2+ (22.2+) 22.2+ (22.2+) 15.4 (25.8 h ) 17.3 (25.8 h ) 21.4 (25.8 h ) 25.8 h (25.8 h ) 25.8 h (25.8 h ) 15.4 (28.5 ) 17.4 (31.8+) 22.5 (31.8+) 28.7 (31.8+) 31.8+ (31.8+) 14.3 (29.3 ) 16.2 (36.7+) 22.2 (36.7+) 29.5 (36.7+) 36.7+ (36.7+) 13.9 (29.9 ) 15.8 (38.1+) 21.7 (38.1+) 30.0 (38.1+) 38.1+ (38.1+) 13.7 (30.0 ) 15.6 (38.5+) 21.6 (38.5+) 30.1 (38.5+) 38.5+ (38.5+)
9.2 (14.2+) 10.2 (14.2+) 13.2 (14.2+) 14.2+ (14.2+) 14.2+ (14.2+) 8.7 (14.9 ) 9.7 (17.2+) 12.6 (17.2+) 15.1 (17.2+) 17.2+ (17.2+) 8.4 (14.4 ) 9.4 (20.8+) 12.3 (20.8+) 14.7 (20.8+) 19.8 (20.8+) 8.6 (15.0 ) 9.6 (23.1+) 12.5 (23.1+) 15.2 (23.1+) 20.3 (23.1+) 7.9 (15.3 ) 8.9 (23.6+) 11.8 (23.6+) 15.5 (23.6+) 20.5 (23.6+) 7.7 (15.1 ) 8.6 (24.1+) 11.5 (24.1+) 15.3 (24.1+) 21.5 (24.1+) 7.2 (14.9 ) 8.1 (23.0+) 11.1 (23.0+) 15.1 (23.0+) 21.6 (23.0+)
6.0 (10.6 ) 6.6 (11.4+) 8.5 (11.4+) 10.8 (11.4+) 11.4+ (11.4+) 5.8 (10.2 ) 6.4 (12.2+) 8.3 (12.2+) 10.4 (12.2+) 12.2+ (12.2+) 5.6 ( 9.8 ) 6.2 (13.7+) 8.1 (13.7+) 10.0 (13.7+) 13.1 (13.7+) 5.6 ( 9.7 ) 6.2 (15.5+) 8.1 (15.5+) 9.9 (15.5+) 12.9 (15.5+) 5.4 (10.1 ) 6.0 (16.8+) 7.9 (16.3 ) 10.3 (16.8+) 13.2 (16.8+) 5.4 (10.4 ) 6.1 (17.0+) 8.1 (16.4 ) 10.6 (17.0+) 13.7 (17.0+) 4.2 ( 8.8 ) 4.8 (17.4+) 6.7 (16.4 ) 9.0 (17.4+) 12.5 (17.4+) 4.1 ( 8.9 ) 4.8 (11.6+) 6.7 (11.6+) 9.1 (11.6+) 11.6+ (11.6+)
3.6 4.1 5.4 7.2 7.4 h 3.8 4.3 5.7 7.3 9.4 3.8 4.3 5.8 7.6 9.3 3.7 4.2 5.7 7.5 9.0 3.2 3.7 5.0 6.8 9.3 3.0 3.4 4.8 6.6 9.2
( 7.0 ) ( 7.4 h ) ( 7.4 h ) ( 7.4 h ) ( 7.4 h ) ( 7.3 ) (10.2 h ) (10.2 h ) (10.2 h ) (10.2 h ) ( 7.4 ) (12.0+) (11.5 ) (12.0+) (12.0+) ( 7.3 ) (12.3+) (11.4 ) (12.8+) (12.8+) ( 6.6 ) (12.3 ) (11.3 ) (13.2+) (12.9 ) ( 6.4 ) (11.9 ) (11.8 ) (12.3+) (12.3+)
20
15
10
5
0
– 5
– 10
– 15
Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down
15.6 (22.6 h ) 17.5 (22.6 h ) 22.6 h (22.6 h ) 22.6 h (22.6 h ) 22.6 h (22.6 h ) 15.4 (23.6 h ) 17.3 (23.6 h ) 21.6 (23.6 h ) 23.6 h (23.6 h ) 23.6 h (23.6 h ) 15.3 (28.5 ) 17.2 (28.9 h ) 22.4 (28.9 h ) 28.6 (28.9 h ) 28.9 h (28.9 h ) 14.9 (28.8 ) 16.8 (34.7+) 22.8 (34.7+) 29.0 (34.7+) 34.7+ (34.7+) 13.9 (30.0 ) 15.8 (37.4+) 21.7 (37.4+) 30.1 (37.4+) 37.4+ (37.4+) 13.9 (29.9 ) 15.7 (39.0+) 21.7 (39.0+) 30.0 (39.0+) 39.0+ (39.0+)
9.5 (12.6 h ) 10.5 (12.6 h ) 12.6 h (12.6 h ) 12.6 h (12.6 h ) 12.6 h (12.6 h ) 8.9 (13.9+) 9.9 (13.9+) 12.9 (13.9+) 13.9+ (13.9+) 13.9+ (13.9+) 8.4 (14.5+) 9.3 (18.9+) 12.3 (18.9+) 14.8 (18.9+) 18.9+ (18.9+) 8.5 (14.9 ) 9.5 (22.2+) 12.4 (22.2+) 15.1 (22.2+) 20.2 (22.2+) 8.2 (15.1+) 9.1 (23.4+) 12.1 (23.4+) 15.2 (23.4+) 20.2 (23.4+) 7.7 (15.0 ) 8.6 (23.7+) 11.5 (23.7+) 15.2 (23.7+) 21.1 (23.7+) 7.5 (15.2 ) 8.5 (25.6+) 11.5 (25.6+) 15.4 (25.6+) 21.9 (25.6+)
6.4 (10.0 h ) 7.0 (10.0 h ) 8.9 (10.0 h ) 10.0 h (10.0 h ) 10.0 h (10.0 h ) 5.9 (10.4 ) 6.6 (10.6 h ) 8.5 (10.6 h ) 10.6 (10.6 h ) 10.6 h (10.6 h ) 5.8 ( 9.9 ) 6.4 (12.6+) 8.3 (12.6+) 10.1 (12.6+) 12.6+ (12.6+) 5.5 ( 9.7 ) 6.2 (14.6+) 8.0 (14.6+) 9.9 (14.6+) 12.9 (14.6+) 5.7 (10.0 ) 6.3 (16.3+) 8.2 (16.3 ) 10.1 (16.3+) 13.2 (16.3+) 5.2 ( 9.9 ) 5.8 (17.0+) 7.7 (16.3 ) 10.1 (17.0+) 13.3 (17.0+) 4.8 ( 9.5 ) 5.4 (17.3+) 7.3 (16.3 ) 9.7 (17.3+) 13.3 (17.3+) 4.1 ( 8.6 ) 4.7 (15.8+) 6.5 (15.8+) 8.8 (15.8+) 12.4 (15.8+)
4.3 4.8 5.9 7.4 8.4 h 4.1 4.6 6.0 7.4 9.6 3.9 4.4 5.8 7.4 9.4 3.7 4.2 5.6 7.0 9.3 3.7 4.2 5.6 7.4 9.2 3.4 3.8 5.3 7.1 9.1 2.6 3.0 4.4 6.1 8.5
( 7.3 ) ( 8.4 h ) ( 8.4 h ) ( 8.4 h ) ( 8.4 h ) ( 7.3 h ) (10.0 h ) (10.0 h ) (10.0 h ) (10.0 h ) ( 7.2 ) (11.2+) (11.2+) (11.2+) (11.2+) ( 6.8 ) (12.1+) (11.4 ) (12.1+) (12.1+) ( 7.2 ) (12.4 ) (11.6+) (13.0+) (12.9 ) ( 6.9 ) (12.3 ) (11.2 ) (13.2+) (12.8 h ) ( 5.9 ) (11.3+) (11.0 ) (11.3+) (11.3+)
2.2 2.6 3.7 5.0 5.8 h 2.2 2.6 3.7 5.0 6.1 h 2.1 2.5 3.6 4.9 6.5 1.8 2.2 3.3 4.6 6.5
(4.9 ) (5.8 h ) (5.8 h ) (5.8 h ) (5.8 h ) (4.9 ) (6.1 h ) (6.1 h ) (6.1 h ) (6.1 h ) (4.8 ) (7.1 h ) (7.1 h ) (7.1 h ) (7.1 h ) (4.4 ) (6.9 h ) (6.9 h ) (6.9 h ) (6.9 h )
Lift capacities are stated in 1000 lb and can be lifted 360h on firm, level supporting surface. Loads in ( . . . ) can be lifted over end only. Capacities shown for “Stabilizers raised” are valid only over the front or steering axle (travel position). Indicated loads are based on ISO 10567 and do not exceed 75 % of tipping or 87 % of hydraulic capacity. Indicated loads are limited by the weld-on safety hook to 26500 lb. Without bucket (1.05 cuyd) lift capacities increase by 1320 lb, and without bucket cylinder, link and lever they increase by an additional 750 lb. + Rating limited by hoist cylinders h Rating limited by stick cylinder Note: When used within the countries of the “European Union” and when lifting a load, this excavator has to be equipped with an overload warning device and its hoist cylinders with automatic check valves, according to the European Standard EN 474-5.
Lift Capacities with Hydr. Adjustable Boom 5
Digging envelope ft
1 2 3 4 5
m 10
30
8 7 6 5 15 4 10
5’11” 6’10” 7’10” 9’10” 12’ 1”
9
25
20
stick stick stick stick stick
3
Stick length Max. digging depth Max. reach at ground level Max. dumping height Max. teeth height
ft-in ft-in
5–11 14– 7
6–10 15– 7
7–10 16– 6
9–10 18– 6
12– 1 20–10
ft-in
26– 1
26– 8
27– 8
29– 6
31– 7
ft-in ft-in
19– 6 28– 0
19– 8 28– 2
20– 2 28– 6
20–10 29– 2
21– 9 30– 4
Max. digging force
kN lb kN lb
148.7 33520 160 35940
125.9 28220 160 35940
115.3 26020 160 35940
98.7 22050 160 35940
84.6 18960 160 35940
Max. breakout force
2 5
Max. breakout force with ripper bucket:
1 0
169 kN (38150 lb)
0 -1
-5 -2 -10
-3 -4 -5
1 3 4
-6
5
2
-15
-20
-7 10
9 30
8
7 25
6
5
20
4 15
Operating weight The operating weight includes basic machine with 8 tires plus spacer rings with gooseneck boom, 6’10” stick and the 1.05 cuyd bucket. 3 10
2
1 5
0m
Undercarriage versions A 914 litronic` with prop up blade A 914 litronic` with 2 pt. outriggers A 914 litronic` with prop up blade + 2 pt. outr. A 914 litronic` with 4 pt. outriggers
0 ft
lb 39910 41010 43440 44100
Buckets Cutting width SAE Capacity SAE (heaped) Max. material weight Weights Standard bucket with Liebherr teeth Z 13 C Bucket with cutting edge HD bucket with Liebherr teeth Z 16 C3) Bucket with ejector and Bofors-teeth Stabilizers raised Prop up blade down 2 point outriggers down Prop up blade + 2 pt. outr. down 4 point outriggers down 1) 2) 3)
in cuyd lb/cuyd
151) 0.39 3000
171) 0.45 3000
19 0.52 3000
22 0.45 3000
242) 0.39 3000
26 0.52 3000
33 0.78 3000
41 1.05 3000
49 1.30 3000
55 1.57 2500
55 1.83 2000
lb lb
– –
– –
– –
1080 1060
– –
1210 1190
1410 1390
1320 1570
1500 1760
1920 1900
2050 –
lb
–
–
–
1460
1870
1390
1630
1830
2090
2230
–
lb
820 860 For machine 21– 4 21– 4 21– 4 21– 4 21– 4 21– 4 21– 4 21– 4 21– 4 21– 4
ft-in ft-in ft-in ft-in ft-in
900 – – – – – – – – stability per ISO 10567 the max. stick length is: 21– 4 21– 4 21– 4 21– 4 21– 4 7–10 – – – 21– 4 21– 4 21– 4 21– 4 21– 4 9–10 6–10 – – 21– 4 21– 4 21– 4 21– 4 21– 4 21– 4 21– 4 9–10 7–10 21– 4 21– 4 21– 4 21– 4 21– 4 21– 4 21– 4 21– 4 21– 4 21– 4 21– 4 21– 4 21– 4 21– 4 21– 4 21– 4 21– 4 21– 4
max. digging depth 4’7”, since bucket suspension is wider than bucket Ripper bucket with Liebherr-teeth Z 16 P It is recommended to use these buckets only with 4 point outriggers down
Backhoe Attachment with Gooseneck Boom 16’5” 6
with stick 6’10”
with stick 7’10”
Height Undercarriage Radius of load from centerline of machine in ft ft 10 15 20 25
Height Undercarriage Radius of load from centerline of machine in ft ft 10 15 20 25
20
15
10
5
0
– 5
– 10
– 15
Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down
13.8 (21.4 h ) 15.6 (21.4 h ) 21.4 (21.4 h ) 21.4 h (21.4 h ) 21.4 h (21.4 h ) 12.8 (17.9 h ) 14.6 (17.9 h ) 17.9 h (17.9 h ) 17.9 h (17.9 h ) 17.9 h (17.9 h ) 10.8 (11.2 h ) 11.2 h (11.2 h ) 11.2 h (11.2 h ) 11.2 h (11.2 h ) 11.2 h (11.2 h ) 10.8 (11.7 h ) 11.7 h (11.7 h ) 11.7 h (11.7 h ) 11.7 h (11.7 h ) 11.7 h (11.7 h ) 10.9 (25.1 h ) 12.6 (25.1 h ) 18.1 (25.1 h ) 25.1 h (25.1 h ) 25.1 h (25.1 h ) 11.4 (25.5+) 13.1 (25.5+) 18.6 (25.5+) 25.5+ (25.5+) 25.5+ (25.5+)
8.0 (13.9+) 8.9 (13.9+) 11.7 (13.9+) 13.9+ (13.9+) 13.9+ (13.9+) 6.8 (13.8 ) 7.7 (17.2+) 10.5 (17.2+) 14.1 (17.2+) 17.2+ (17.2+) 6.1 (12.9 ) 7.0 (20.2+) 9.7 (20.2+) 13.2 (20.2+) 18.9 (20.2+) 6.0 (12.8 ) 6.8 (21.9+) 9.5 (21.9+) 13.1 (21.9+) 18.8 (21.9+) 5.9 (12.7 ) 6.8 (21.3+) 9.4 (21.3+) 13.0 (21.3+) 18.7 (21.3+) 6.0 (12.9 ) 6.9 (18.6+) 9.6 (18.6+) 13.1 (18.6+) 18.6+ (18.6+) 6.7 (13.6 ) 7.6 (13.7+) 10.3 (13.7+) 13.7+ (13.7+) 13.7+ (13.7+)
5.6 (10.2 ) 6.2 (11.1+) 8.0 (11.1+) 10.4 (11.1+) 11.1+ (11.1+) 5.1 ( 9.6 ) 5.7 (11.9+) 7.5 (11.9+) 9.8 (11.9+) 11.9+ (11.9+) 4.5 ( 8.9 ) 5.1 (13.3+) 6.8 (13.3+) 9.1 (13.3+) 12.6 (13.3+) 4.0 ( 8.4 ) 4.6 (14.9+) 6.4 (14.9+) 8.6 (14.9+) 12.1 (14.9+) 3.9 ( 8.3 ) 4.5 (16.0+) 6.3 (15.6 ) 8.5 (16.0+) 11.9 (16.0+) 3.8 ( 8.2 ) 4.4 (15.6+) 6.2 (15.5 ) 8.4 (15.6+) 11.8 (15.6+) 4.0 ( 8.4 ) 4.6 (13.6+) 6.3 (13.6+) 8.6 (13.6+) 12.0 (13.6+)
20 3.2 ( 6.5 ) 3.7 (10.2 h ) 5.0 (10.2 h ) 6.7 (10.2 h ) 9.1 (10.2 h ) 3.0 ( 6.2 ) 3.4 (11.6+) 4.7 (11.2 ) 6.4 (11.6+) 8.8 (11.6+) 2.8 ( 6.0 ) 3.2 (12.0 ) 4.5 (10.9 ) 6.2 (12.2+) 8.6 (12.2+) 2.7 ( 6.0 ) 3.2 (11.9 ) 4.5 (10.9 ) 6.1 (12.6+) 8.5 (12.6+)
15
10
5
0
– 5
– 10
– 15
Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down
14.5 (21.3+) 16.4 (21.3+) 21.3+ (21.3+) 21.3+ (21.3+) 21.3+ (21.3+) 11.5 (11.7 h ) 11.7 h (11.7 h ) 11.7 h (11.7 h ) 11.7 h (11.7 h ) 11.7 h (11.7 h ) 9.8 h ( 9.8 h ) 9.8 h ( 9.8 h ) 9.8 h ( 9.8 h ) 9.8 h ( 9.8 h ) 9.8 h ( 9.8 h ) 10.7 (13.1 h ) 12.4 (13.1 h ) 13.1 h (13.1 h ) 13.1 h (13.1 h ) 13.1 h (13.1 h ) 10.7 (23.0 h ) 12.4 (23.0 h ) 17.9 (23.0 h ) 23.0 h (23.0 h ) 23.0 h (23.0 h ) 11.1 (25.8 ) 12.8 (27.1+) 18.3 (27.1+) 26.0 (27.1+) 27.1+ (27.1+) 11.8 (21.2+) 13.5 (21.2+) 19.1 (21.2+) 21.2+ (21.2+) 21.2+ (21.2+)
8.0 (13.6+) 9.0 (13.6+) 11.8 (13.6+) 13.6+ (13.6+) 13.6+ (13.6+) 6.8 (13.9 ) 7.7 (16.1+) 10.5 (16.1+) 14.1 (16.1+) 16.1+ (16.1+) 6.0 (12.9 ) 6.9 (19.5+) 9.6 (19.5+) 13.1 (19.5+) 18.9 (19.5+) 5.9 (12.7 ) 6.7 (21.5+) 9.4 (21.5+) 13.0 (21.5+) 18.7 (21.5+) 5.7 (12.5 ) 6.6 (21.4+) 9.3 (21.4+) 12.8 (21.4+) 18.5 (21.4+) 5.8 (12.6 ) 6.7 (19.2+) 9.4 (19.2+) 12.9 (19.2+) 18.6 (19.2+) 6.3 (13.2 ) 7.2 (13.5+) 9.9 (13.5+) 13.4 (13.5+) 13.5+ (13.5+)
5.4 (10.0 ) 6.1 (10.2+) 7.9 (10.2+) 10.2+ (10.2+) 10.2+ (10.2+) 4.9 ( 9.4 ) 5.5 (11.1+) 7.3 (11.1+) 9.6 (11.1+) 11.1+ (11.1+) 4.4 ( 8.8 ) 4.9 (12.7+) 6.7 (12.7+) 9.0 (12.7+) 12.5 (12.7+) 3.9 ( 8.3 ) 4.5 (14.3+) 6.2 (14.3+) 8.5 (14.3+) 11.9 (14.3+) 3.7 ( 8.1 ) 4.3 (15.6+) 6.1 (15.4 ) 8.4 (15.6+) 11.8 (15.6+) 3.6 ( 8.0 ) 4.2 (15.6+) 5.9 (15.2 ) 8.2 (15.6+) 11.6 (15.6+) 3.7 ( 8.1 ) 4.3 (13.6+) 6.0 (13.6+) 8.3 (13.6+) 11.7 (13.6+)
3.4 3.8 5.2 6.9 8.6 h 3.1 3.5 4.8 6.5 8.9 2.8 3.3 4.6 6.2 8.6 2.6 3.0 4.3 6.0 8.4 2.5 3.0 4.3 5.9 8.3 2.5 3.0 4.3 6.0 8.4
( 6.7 ) ( 8.6 h ) ( 8.6 h ) ( 8.6 h ) ( 8.6 h ) ( 6.3 ) (10.0 h ) (10.0 h ) (10.0 h ) (10.0 h ) ( 6.1 ) (11.0+) (11.0 ) (11.0+) (11.0+) ( 5.8 ) (11.8 ) (10.7 ) (11.8+) (11.8+) ( 5.8 ) (11.7 ) (10.6 ) (12.3+) (12.3+) ( 5.8 ) (11.9 ) (10.8 ) (12.2+) (12.2+)
with stick 9’10”
with stick 12’1”
Height Undercarriage Radius of load from centerline of machine in ft ft 10 15 20 25
Height Undercarriage Radius of load from centerline of machine in ft ft 10 15 20 25
20
15
10
5
0
– 5
– 10
– 15
Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down
12.4 (16.1 h ) 14.1 (16.1 h ) 16.1 h (16.1 h ) 16.1 h (16.1 h ) 16.1 h (16.1 h ) 10.9 (13.7 h ) 12.6 (13.7 h ) 13.7 h (13.7 h ) 13.7 h (13.7 h ) 13.7 h (13.7 h ) 10.7 (15.5 h ) 12.4 (15.5 h ) 15.5 h (15.5 h ) 15.5 h (15.5 h ) 15.5 h (15.5 h ) 10.5 (22.0 h ) 12.2 (22.0 h ) 17.6 (22.0 h ) 22.0 h (22.0 h ) 22.0 h (22.0 h ) 10.7 (25.4 ) 12.4 (29.1+) 17.9 (29.1+) 25.6 (29.1+) 29.1+ (29.1+) 11.3 (22.9+) 13.0 (22.9+) 18.5 (22.9+) 22.9+ (22.9+) 22.9+ (22.9+)
8.4 (13.4+) 9.4 (13.4+) 12.2 (13.4+) 13.4+ (13.4+) 13.4+ (13.4+) 7.1 (14.2 ) 8.0 (14.5+) 10.8 (14.5+) 14.4 (14.5+) 14.5+ (14.5+) 6.2 (13.1 ) 7.0 (18.2+) 9.8 (18.2+) 13.3 (18.2+) 18.2+ (18.2+) 5.9 (12.7 ) 6.8 (20.8+) 9.4 (20.8+) 13.0 (20.8+) 18.7 (20.8+) 5.6 (12.4 ) 6.5 (21.5+) 9.1 (21.5+) 12.7 (21.5+) 18.4 (21.5+) 5.6 (12.4 ) 6.5 (20.0+) 9.1 (20.0+) 12.7 (20.0+) 18.4 (20.0+) 5.9 (12.8 ) 6.8 (16.0+) 9.5 (16.0+) 13.0 (16.0+) 16.0+ (16.0+)
5.7 ( 9.6+) 6.3 ( 9.6+) 8.2 ( 9.6+) 9.6+ ( 9.6+) 9.6+ ( 9.6+) 5.1 ( 9.7 ) 5.7 (10.0+) 7.5 (10.0+) 9.9 (10.0+) 10.0+ (10.0+) 4.5 ( 9.0 ) 5.1 (11.7+) 6.9 (11.7+) 9.2 (11.7+) 11.7+ (11.7+) 3.9 ( 8.4 ) 4.5 (13.6+) 6.3 (13.6+) 8.6 (13.6+) 12.0 (13.6+) 3.8 ( 8.2 ) 4.3 (15.1+) 6.1 (15.1+) 8.4 (15.1+) 11.8 (15.1+) 3.5 ( 7.9 ) 4.1 (15.7+) 5.9 (15.2 ) 8.1 (15.7+) 11.5 (15.7+) 3.5 ( 7.9 ) 4.1 (14.5+) 5.8 (14.5+) 8.1 (14.5+) 11.5 (14.5+) 3.8 ( 8.4 ) 4.4 (12.6+) 6.3 (12.6+) 8.6 (12.6+) 12.1 (12.6+)
3.5 4.0 5.3 6.9 h 6.9 h 3.2 3.6 5.0 6.6 9.1 2.9 3.3 4.6 6.3 8.7 2.6 3.0 4.3 6.0 8.4 2.5 2.9 4.2 5.9 8.3 2.4 2.8 4.1 5.8 8.2
( 6.8 ) ( 6.9 h ) ( 6.9 h ) ( 6.9 h ) ( 6.9 h ) ( 6.5 ) ( 9.5+) ( 9.5+) ( 9.5+) ( 9.5+) ( 6.1 ) (10.3+) (10.3+) (10.3+) (10.3+) ( 5.8 ) (11.3+) (10.7 ) (11.3+) (11.3+) ( 5.7 ) (11.7 ) (10.6 ) (12.0+) (12.0+) ( 5.6 ) (11.5 ) (10.5 ) (12.0+) (12.0+)
20
15
10
5
0
– 5
– 10
– 15
Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down Stabilizers raised Prop up blade down 2 pt. outr. down Blade + 2 pt. down 4 pt. outr. down
13.7 (21.2+) 15.6 (21.2+) 21.2+ (21.2+) 21.2+ (21.2+) 21.2+ (21.2+) 11.2 (17.5 h ) 13.0 (17.5 h ) 17.5 h (17.5 h ) 17.5 h (17.5 h ) 17.5 h (17.5 h ) 10.9 (17.5 h ) 12.6 (17.5 h ) 17.5 h (17.5 h ) 17.5 h (17.5 h ) 17.5 h (17.5 h ) 10.4 (20.9 h ) 12.1 (20.9 h ) 17.5 (20.9 h ) 20.9 h (20.9 h ) 20.9 h (20.9 h ) 10.3 (24.9 ) 12.0 (27.9 h ) 17.4 (27.9 h ) 25.1 (27.9 h ) 27.9 h (27.9 h ) 10.8 (25.5 ) 12.5 (26.8+) 17.9 (26.8+) 25.7 (26.8+) 26.8+ (26.8+)
7.6 (13.4+) 8.5 (13.4+) 11.3 (13.4+) 13.4+ (13.4+) 13.4+ (13.4+) 6.4 (13.4 ) 7.3 (16.7+) 10.1 (16.7+) 13.6 (16.7+) 16.7+ (16.7+) 6.1 (13.0 ) 7.0 (19.7+) 9.7 (19.7+) 13.3 (19.7+) 19.1 (19.7+) 5.6 (12.5 ) 6.5 (21.3+) 9.2 (21.3+) 12.7 (21.3+) 18.5 (21.3+) 5.5 (12.3 ) 6.3 (21.0+) 9.0 (21.0+) 12.6 (21.0+) 18.3 (21.0+) 5.6 (12.5 ) 6.5 (18.1+) 9.2 (18.1+) 12.7 (18.1+) 18.1+ (18.1+)
5.4 ( 9.6+) 6.0 ( 9.6+) 7.9 ( 9.6+) 9.6+ ( 9.6+) 9.6+ ( 9.6+) 4.8 ( 9.3 ) 5.4 (10.5+) 7.2 (10.5+) 9.5 (10.5+) 10.5+ (10.5+) 4.1 ( 8.5 ) 4.7 (12.6+) 6.4 (12.6+) 8.7 (12.6+) 12.2 (12.6+) 3.9 ( 8.4 ) 4.5 (14.5+) 6.3 (14.5+) 8.6 (14.5+) 12.0 (14.5+) 3.6 ( 8.0 ) 4.1 (15.5+) 5.9 (15.2 ) 8.2 (15.5+) 11.6 (15.5+) 3.5 ( 7.8 ) 4.0 (15.2+) 5.8 (15.1 ) 8.0 (15.2+) 11.4 (15.2+) 3.6 ( 8.0 ) 4.1 (12.8+) 5.9 (12.8+) 8.2 (12.8+) 11.6 (12.8+)
3.8 ( 7.2 ) 4.3 ( 8.1+) 5.6 ( 8.1+) 7.3 ( 8.1+) 8.1+ ( 8.1+) 3.4 ( 6.8 ) 3.9 ( 8.6+) 5.2 ( 8.6+) 6.9 ( 8.6+) 8.6+ ( 8.6+) 3.0 ( 6.3 ) 3.5 ( 9.5+) 4.8 ( 9.5+) 6.5 ( 9.5+) 8.9 ( 9.5+) 2.7 ( 5.9 ) 3.1 (10.6+) 4.4 (10.6+) 6.1 (10.6+) 8.5 (10.6+) 2.6 ( 5.8 ) 3.0 (11.6+) 4.3 (10.7 ) 6.0 (11.6+) 8.4 (11.6+) 2.4 ( 5.6 ) 2.8 (11.6 ) 4.1 (10.5 ) 5.8 (12.1+) 8.2 (12.1+) 2.3 ( 5.6 ) 2.8 (11.3+) 4.1 (10.4 ) 5.7 (11.3+) 8.1 (11.3+)
Lift capacities are stated in 1000 lb and can be lifted 360h on firm, level supporting surface. Loads in ( . . . ) can be lifted over end only. Capacities shown for “Stabilizers raised” are valid only over the front or steering axle (travel position). Indicated loads are based on ISO 10567 and do not exceed 75 % of tipping or 87 % of hydraulic capacity. Indicated loads are limited by the weld-on safety hook to 26500 lb. Without bucket (1.05 cuyd) lift capacities increase by 1320 lb, and without bucket cylinder, link and lever they increase by an additional 750 lb. + Rating limited by hoist cylinders h Rating limited by stick cylinder Note: When used within the countries of the “European Union” and when lifting a load, this excavator has to be equipped with an overload warning device and its hoist cylinders with automatic check valves, according to the European Standard EN 474-5.
Lift Capacities with Gooseneck Boom 16’5” 7
Digging envelope ft
25
1 2 3 4 5
m 9 8 7
20
15
5’11” 6’10” 7’10” 9’10” 12’ 1”
Stick length Max. digging depth Max. reach at ground level Max. dumping height
6 5 4
10
stick stick stick stick stick
3
ft-in 5–11 6–10 7–10 ft-in 20– 8 19– 8 19– 8
9–10 12– 1 24–7 26–10
ft-in 26–10 27– 8 28– 8
30–6 32– 9
ft-in 19– 0 19– 6 20– 2
19–8 22–11
Camshell model: Max. tooth force: Max. torque of hydr. swivel
2 5
10 B 73 kN (16320 lb) 1.76 kNm
1 0
0 -1
-5 -2 -10
-3 -4
-15 -20
-5 -6
2
-7 -25
The operating weight includes basic machine with 8 tires plus spacer rings, hydr. adjustable boom, 6’10” stick and the clamshell model 10 B/0.78 cuyd.
5
-8 -9 10
Operating weight
1 3 4
9 30
8
7 25
6 20
5
4 15
3 10
2
1 5
0 m 0 ft
Undercarriage versions A 914 litronic` with prop up blade A 914 litronic` with 2 pt. outriggers A 914 litronic` with prop up blade + 2 pt. outr. A 914 litronic` with 4 pt. outriggers
lb 42330 43430 45860 46520
Clamshell model 10 B Width of shells Capacity SAE (heaped) Max. material weight Weight incl. suspension and hydr. swivel Stabilizers raised Prop up blade down 2 point outriggers down Prop up blade + 2 pt. outr. down 4 point outriggers down
in cuyd lb/cuyd lb ft-in ft-in ft-in ft-in ft-in
without ejector 13 16 24 31 39 39 59 71 0.22 0.29 0.46 0.59 0.78 1.30 1.97 2.35 3000 3000 3000 3000 3000 2000 2000 2000
1690 1807 1890 2000 2140 2290 2550 2820 1810 1940 For machine stability per ISO 10567 the max. stick length is: 12–2 12–2 9–10 6–10 – – – – 12–2 12–2 12–2 12–2 12– 2 9–10 6–10 – – – 12–2 12–2 12–2 12–2 12– 2 12– 2 12– 2 9–10 – – 12–2 12–2 12–2 12–2 12– 2 12– 2 12– 2 12– 2 7–10 6–10 12–2 12–2 12–2 12–2 12– 2 12– 2 12– 2 12– 2 12– 2 12– 2 12–2 12–2
Clamshell Attachment with Hydr. Adjustable Boom 8
with ejector 13 16 24 31 0.22 0.29 0.46 0.59 3000 3000 3000 3000 2090 2230 7–10 9–10 12– 2 12– 2 12– 2
6–10 7–10 12– 2 12– 2 12– 2
Digging envelope ft 25
1 2 3 4 5
m 8
stick stick stick stick stick
5’11” 6’10” 7’10” 9’10” 12’ 1”
7 20
Stick length Max. digging depth Max. reach at ground level Max. dumping height
6 5
15 4 10
3
5–11 6–10 7–10 9–10 18– 0 19– 0 20– 0 21–11
12–1 24–3
ft-in
25– 1 25– 9 26– 8 28– 4
30–6
ft-in
15–11 16– 1 16– 6 17– 2
18–2
Camshell model: Max. tooth force: Max. torque of hydr. swivel:
2 5 1 0
ft-in ft-in
10 B 73 kN (16320 lb) 1.76 kNm
0 -1
-5 -2 -10
-3 -4
-15 -5 -20
1 2 3 4
-6 -7
-25
-8 10
Operating weight
5 9 30
8
7 25
6 20
5
4 15
3 10
2
1 5
0 m 0 ft
The operating weight includes basic machine with 8 tires plus spacer rings, gooseneck boom, 6’10” stick and the clamshell model 10 B/0.78 cuyd. Undercarriage versions A 914 litronic` with prop up blade A 914 litronic` with 2 pt. outriggers A 914 litronic` with prop up blade + 2 pt. outr. A 914 litronic` with 4 pt. outriggers
lb 40560 41660 44100 44750
Clamshell model 10 B Width of shells Capacity SAE (heaped) Max. material weight Weight incl. suspension and hydr. swivel Stabilizers raised Prop up blade down 2 point outriggers down Prop up blade + 2 pt. outr. down 4 point outriggers down
in cuyd lb/cuyd lb ft-in ft-in ft-in ft-in ft-in
without ejector 13 16 24 31 39 39 59 71 0.22 0.29 0.46 0.59 0.78 0.30 0.97 2.35 3000 3000 3000 3000 3000 2000 2000 2000
with ejector 13 16 24 31 0.22 0.29 0.46 0.59 3000 3000 3000 3000
1690 1807 1890 2000 2140 2290 2550 2820 1810 1940 For machine stability per ISO 10567 the max. stick length is: 12–1 12–1 12–1 6–10 6–10 – – – 12–1 12–1 12–1 12–1 12–1 12– 1 7–10 6–10 – – 12–1 12–1 12–1 12–1 12–1 12– 1 12– 1 12– 1 6–10 – 12–1 12–1 12–1 12–1 12–1 12– 1 12– 1 12– 1 12– 1 7–10 12–1 12–1 12–1 12–1 12–1 12– 1 12– 1 12– 1 12– 1 12– 1 12–1 12–1
2090 2230 12–1 7–10 12–1 6–10 12–1 12– 1 12–1 12– 1 12–1 12– 1
Clamshell Attachment with Gooseneck Boom 16’5” 9
Digging envelope ft
1 2 3 4 5
m 11
35 10 30
9
5’11” 6’10” 7’10” 9’10” 12’ 1”
Stick length Max. digging depth Max. reach at ground level Max. dumping height Max. teeth height
8 25 7 20
stick stick stick stick stick
6 5
ft-in 5–11 6–10 7–10 9–10 12–1 ft-in 15– 7 16– 6 17– 6 19– 6 21–9 ft-in 26– 5 27– 2 28– 2 30– 0 32–3 ft-in 24– 3 24– 9 25– 5 26– 6 28–2 ft-in 29–10 30– 4 31– 0 29– 6 33–4
15 4 10
3 2
5 1 0
0 -1
-5 -2 -10
-3
Operating weight
-4 -15 -20
1 2 3 4
-5 -6
The operating weight includes basic machine with 8 tires plus spacer rings, hydr. adjustable boom, 6’10” stick and the 0.92 cuyd ditchcleaning bucket.
5 -7 10
9 30
8 25
7
6 20
5
4 15
3 10
2
1 5
0m 0 ft
Undercarriage versions A 914 litronic` with prop up blade A 914 litronic` with 2 pt. outriggers A 914 litronic` with prop up blade + 2 pt. outr. A 914 litronic` with 4 pt. outriggers
lb 41450 42550 44970 45630
Ditchcleaning bucket Cutting width SAE Capacity SAE (heaped) Max. material weight Weight of bucket Stabilizers raised Prop up blade down 2 point outriggers down Prop up blade + 2 pt. outr. down 4 point outriggers down 1)
in cuyd lb/cuyd lb ft-in ft-in ft-in ft-in ft-in
59 791) 79 95 79 (with 2 x 45h rotator) 0.65 0.59 0.92 1.11 0.92 3000 3000 3000 3000 3000 840 880 1060 1150 1570 For machine stability per ISO 10567 the max. stick length is: 12–2 12–2 7–10 – 6–10 12–2 12–2 9–10 6–10 7–10 12–2 12–2 12– 2 12– 2 12– 2 12–2 12–2 12– 2 12– 2 12– 2 12–2 12–2 12– 2 12– 2 12– 2
Bucket for narrow bottomed ditches
Ditchcleaning Attachment with Hydr. Adjustable Boom 10
Digging envelope ft
1 2 3 4 5
m 9
stick stick stick stick stick
5’11” 6’10” 7’10” 9’10” 12’ 1”
8 25
Stick length Max. digging depth Max. reach at ground level Max. dumping height Max. teeth height
7 20
6 5
15 4 10
ft-in ft-in
5–11 6–10 7–10 9–10 12– 1 12–11 13–11 14–11 16– 9 19– 2
ft-in
24– 3 25– 1 26– 1 27– 8 30– 0
ft-in ft-in
21– 0 21– 4 21– 9 22– 5 23– 3 26– 7 26– 8 27– 2 26– 3 28–10
3 2
5 1 0
0 -1
-5 -2 -10
-3 1 2 3 4
-4 -15 -5 -6 10
Operating weight
5 9 30
8 25
7
6 20
5
4 15
3 10
2
1 5
0 m 0 ft
The operating weight includes basic machine with 8 tires plus spacer rings, gooseneck boom, 6’10” stick and the 0.92 cuyd ditchcleaning bucket. Undercarriage versions A 914 litronic` with prop up blade A 914 litronic` with 2 pt. outriggers A 914 litronic` with prop up blade + 2 pt. outr. A 914 litronic` with 4 pt. outriggers
lb 39680 40780 43210 43870
Ditchcleaning bucket Cutting width SAE Capacity SAE (heaped) Max. material weight Weight of bucket Stabilizers raised Prop up blade down 2 point outriggers down Prop up blade + 2 pt. outr. down 4 point outriggers down 1)
in cuyd lb/cuyd lb ft-in ft-in ft-in ft-in ft-in
59 791) 79 95 79 (with 2 x 45h rotator) 0.65 0.59 0.92 1.11 0.92 3000 3000 3000 3000 3000 840 880 1060 1150 1570 For machine stability per ISO 10567 the max. stick length is: 12–2 12–2 12–2 7–10 7–10 12–2 12–2 12–2 9–10 9–10 12–2 12–2 12–2 12– 2 12– 2 12–2 12–2 12–2 12– 2 12– 2 12–2 12–2 12–2 12– 2 12– 2
Bucket for narrow bottomed ditches
Ditchcleaning Attachment with Gooseneck Boom 16’5” 11
Standard Equipment
Optional Equipment
Undercarriage x x x x x x x x x
Two speed powershift transmission plus creeper speed Creeper speed electrically switchable from cab Two circuit travel brake with accumulator Proportional power steering with mechanical back up Service free parking brake inside transmission (spring activated) Auto check valve directly on each stabilizer cylinder Clam travel bracket Lockable large rustfree storage box New tires
x x x x
Independent outrigger control Second lockable rust free storage box in u/c Customized colors Choice of tires
x x x x
Electric fuel tank filler pump Pedal controlled positioning swing brake Extended tool kit Customized colors
x x x
Additional hydraulic circuits Bio degradable hydraulic oil Full flow micro filtration
x
Cold start aid
x x x x x x
Removable lower section of front window with storage Preparation for radio installation Stereo radio Airpressure adjustable seat with heating and headrest Beacon Optical and acoustical warning if outriggers are not fully retracted Electronic drive away lock Additional flood lights Fan Bullet proof front window (fixed installation – can not be opened)
Uppercarriage x x x x x x x x x
Engine hood with lift help Lockable tool box Main switch for electric circuit Handrails, non slip surfaces Tool kit Maintenance-free swing brake lock Maintenance-free HD-batteries Sound insulation Pin lock upper/lower
x x x x x x x x
Electronic pump regulation at all R.P.M. Four fixed modes, can also be adjusted Pressure storage for controlled lowering of attachments with engine turned off Hydraulic tank shut-off valve Pressure compensation Flow compensation Filter with partial micro filtration (5 mm) Hook ups for pressure checks
Engine x x x x
Direct injection Turbo charger Air filter with pre-cleaner main- and safety element Sensor controlled engine idling
Operator’s cab x x x x x x x x x x x x x x x x x x x
Deep drawn cab shell components All tinted windows Door with sliding window All-round adjustable roof vent Rain hood over front window opening Wiper/washer 6-way adjustable seat Seat and consoles independently adjustable Air condition Cloth hook Dome light Sun shade Inside rear mirror Cigarette lighter and ashtray Removable customized foot mat Storage compartment Warning lights Digital instruments for oil temp, engine R.P.M. and oil pressure Additional mechanical hour meter, readable from outside the cab
x x x x
Attachment x x x x x x x x x x
Cylinders with shock absorber Sealed pivots Centralized lube points SAE-dbl flange connection for all hi-pressure lines Locking of connecting link during clam work Safety lift hook on hoe buckets Hydr. lines for clam operation on stick Two way valves for bucket/clam use Flood light on boom and cab Y-flange seals at bucket/stick pivot
x x x x x x x
Safety check valves for all attachment cylinders Overload warning device Hydraulic or manual quick change tool adaptor Hose quick connections Liebherr line of clams and grapples Spezial buckets and other tools Customized colors
Options and/or special attachments, supplied by vendors other than Liebherr, are only to be installed with the knowledge and approval of Liebherr to retain warranty.
LIEBHERR Construction Equipment Co., 4100 Chestnut Avenue, Newport News, VA 23607, USA, ç (7 57) 2 45-52 51, Fax (7 57) 9 28-87 00, www.liebherr.com, E-Mail:
[email protected] With compliments:
LHB/VF 8420660-2-11.00 Printed in Germany by Gagstatter. Illustrations and data may differ from standard equipment. Subject to change without notice.
Hydraulics