Level Comps

LEVEL COMPENSATORS to assist sheet separation. Level compensators also serve as shock absorbers to prevent damage to work pieces and allow greater positioning latitude for robotic applications. Extensive use of aluminum has reduced the weight of EDCO USA compensators by as much as 60 percent.

Level compensators are primarily used to compensate for height differences on a work piece surface and they should be installed so that all of the level compensators are fully extended while supporting the load. For special applications, such as sheet feeding, level compensators can be staggered so that lifting begins at the edge or corner

LC10X5-10

G1/8 NPSF

0.2 [5]

M5 x 0.8 (10-32 UNF)

CUP ACCESSORIES

Weight: 0.02 oz. (5.7 g)

0.6 [15.2]

Barb for 10 & 15mm Cups.

0.05 [1.3] 1.22 [31]

LC10: STANDARD A B

M5 x 0.8 (10-32 UNF) Female 2 Places

C

D

JN-G18 2 Included

G1/8 BSPP

0.25 [6.4] Hex

PART NUMBER

A LENGTH in. (mm)

B SLEEVE HEIGHT in. (mm)

C STROKE in. (mm)

D COUPLER in. (mm)

LC10 LC10X20 LC10X30 LC10X50

1.7 (43.2) 3.4 (86.4) 4.17 (106) 5.77 (147)

0.76 (19.3) 1.83 (46.5) 2.23 (56.6) 3.03 (77)

0.3 (7.6) 0.79 (20) 1.2 (30.5) 2.0 (50.8)

0.37 (9.4) 0.37 (9.4) 0.37 (9.4) 0.37 (9.4)

WEIGHT oz. (g) 0.2 (5.7) 0.3 (8.5) 0.5 (14.2) 1.3 (37)

LC10: NON-ROTATING A E

B M5 x 0.8 (10-32 UNF) Female 2 Places

JN-G18 2 Included

C

D

0.25 [6.4] Hex

0.22 [5.6] Hex

G1/8 BSPP

A

B

C

D

E

PART NUMBER

LENGTH

SLEEVE HEIGHT

STROKE

COUPLER

COLLAR

in. (mm)

in. (mm)

in. (mm)

in. (mm)

in. (mm)

oz. (g)

LC10-NR LC10X50-NR

1.95 (49.5) 5.92 (150)

0.51 (13) 2.78 (70.6)

0.3 (7.6) 2.0 (50.8)

0.37 (9.4) 0.37 (9.4)

0.54 (13.7) 0.4 (10.2)

0.3 (8.5) 0.7 (19.8)

©2008 EDCO USA. www.edcousa.net

5:3

WEIGHT

LEVEL COMPENSATORS LC18: STANDARD A B

G1/8 NPSF Female

D

G1/8 NPSF Male

JN-M16X1 2 Included

M16 x 1.0

PART NUMBER

A LENGTH in. (mm)

B SLEEVE HEIGHT in. (mm)

C STROKE in. (mm)

D HEX HEIGHT in. (mm)

LC18 LC18X35 LC18X50

2.89 (73.4) 4.47 (114) 5.75 (146)

1.38 (35.1) 2.33 (59.2) 2.97 (75.4)

0.79 (20.1) 1.4 (35.6) 2.0 (50.8)

0.13 (3.3) 0.13 (3.3) 0.13 (3.3)

WEIGHT oz. (g) 1.0 (28.3) 1.5 (42.5) 1.8 (51)

LC18: 20mm CLAMP MOUNT

CUP ACCESSORIES

0.5 [12.7] Hex

C

A B

C

D

G1/8 NPSF Female

G1/8 NPSF Male 0.78 [20] O.D.

0.5 [12.7] Hex PART NUMBER

A LENGTH in. (mm)

B SLEEVE HEIGHT in. (mm)

C STROKE in. (mm)

D HEX HEIGHT in. (mm)

LC18-20 LC18X35-20 LC18X50-20

2.89 (73.4) 4.47 (114) 5.75 (146)

1.38 (35.1) 2.33 (59.2) 2.97 (75.4)

0.79 (20.1) 1.4 (35.6) 2.0 (50.8)

0.13 (3.3) 0.13 (3.3) 0.13 (3.3)

WEIGHT oz. (g) 1.2 (35.2) 2.1 (59.5) 2.6 (73.7)

LC18: NON-ROTATING A B

D

C

G1/8 NPSF Female 0.5 [12.7] Hex

G1/8 NPSF Male JN-M16X1 2 Included

0.44 [11.1] Hex

M16 x 1.0

PART NUMBER

A LENGTH in. (mm)

B SLEEVE HEIGHT in. (mm)

C STROKE in. (mm)

D COLLAR in. (mm)

LC18-NR LC18X35-NR LC18X50-NR

2.95 (75) 4.51 (115) 5.82 (148)

1.08 (27.4) 2.62 (66.5) 2.67 (67.8)

0.79 (20.1) 1.4 (35.6) 2.0 (50.8)

0.5 (12.7) 0.5 (12.7) 0.5 (12.7)

WEIGHT oz. (g) 1.3 (36.8) 3.4 (96) 3.9 (111)

LC12: STANDARD O-RING SEAL 2 PLACES

0.7 [17.8] G1/2 NPSF 1.0 (25.4) HEX 2 PLACES

G1/2 NPSF

Weight: 5.8 oz. (164 g)

2.36 [59.9]

5:4

©2008 EDCO USA. www.edcousa.net