Leva Pump 2ddrafting
This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA
Overview
Download & View Leva Pump 2ddrafting as PDF for free.
More details
- Words: 2,358
- Pages: 9
8
6
7
5
4
3
2
1
DATE
PRODUCTION DRAWINGS
APPROVED
Feb 2008
REV
F
REVISION DESCRIPTION
Final Tooled Data - Feb 2008 D
D
NOTES: 1.) MATERIAL: SS, Acrylic & ABS
TOP
2.) FINISH/COLOUR: Clear, SS 3.) OTHER MFG NOTES:
110.5
4.) ALL DIMENSIONS ARE IN mm UNLESS OTHERWISE SPECIFIED. 5.) DEFAULT TOLERANCES: X.X 0.5 , X.XX 0.25 , ANGLES 0.25 (unless otherwise specified)
C
C
6.) DOCKET:: 9663
212.7 ISO VIEW
B
B
LEVA SOAP PUMP TITLE:
76.8
FRONT
B
SIDE VIEW
SIZE
9663
F REV
DWG. NO.
SCALE: 1:5
UNITS: mm Drawings are strictly Design Drawings and not intended to be used for toolmaking purposes. They are not considered final engineering drawings. Specifications for tolerances, tooling and manufacturing are the responsibility of the manufacturer unless otherwise specified.
A
All copyright, design and other intellectual property rights in the contents hereof are the sole and exclusive property of Umbra Ltd./Umbra Inc. The provision of this document to you does not afford you any ownership, rights or license to use or reproduce same, all of which remains the property of Umbra Ltd./Umbra Inc. Reproduction, storage in a retrieval system, or transmission in any form by any means, whether electronic, mechanical or otherwise, in whole or in part, without the prior written consent of Umbra Ltd. /Umbra Inc. is strictly prohibited. DRAWN
BOTTOM VIEW
NAME DATE
8
7
6
5
4
3
2
APPROVED
SHEET
Your Name
1 OF 9
1/1/9999
1
A
8
6
7
5
4
2
3
PRODUCTION DRAWINGS
6
D
7
ITEM NO.
PART NUMBER
MATERIAL
QTY.
ASSEMBLED VIA SELF PHILLIPS HEAD THREADING SCREWS
1
SS COVER
STAINLESS STEEL
1
2
ACRYLIC BODY
CLEAR ACRYLIC
1
STEP 1
3
BOTTOM CAP
CLEAR ACRYLIC
1
4
PUMP ENGINE COVER
WHITE ABS
1
5
INNER HOUSING
ABS
1
6
TOP CAP
PLATED ABS
1
7
TOP CAP FRAME
ABS
1
4
C
1
D
PUMP COVER ASSEMBLY IS SNAP FIT INTO INNER COVER FROM REAR CLIP FEATURE. STEP 4
5
C
1
SS COVER FIT OVER ACRYLIC BODY PERMANENTLY ATTACHED WITH ADHESIVE
B
B
STEP 3
LEVA SOAP PUMP
TITLE:
2
SONIC WELD MUST BE A HERMETIC SEAL STEP 2
B SIZE
9663
F REV
DWG. NO.
SCALE: 1:1
UNITS: mm Drawings are strictly Design Drawings and not intended to be used for toolmaking purposes. They are not considered final engineering drawings. Specifications for tolerances, tooling and manufacturing are the responsibility of the manufacturer unless otherwise specified.
A
All copyright, design and other intellectual property rights in the contents hereof are the sole and exclusive property of Umbra Ltd./Umbra Inc. The provision of this document to you does not afford you any ownership, rights or license to use or reproduce same, all of which remains the property of Umbra Ltd./Umbra Inc. Reproduction, storage in a retrieval system, or transmission in any form by any means, whether electronic, mechanical or otherwise, in whole or in part, without the prior written consent of Umbra Ltd. /Umbra Inc. is strictly prohibited.
3
DRAWN NAME DATE
8
7
6
5
4
3
2
APPROVED
SHEET
Your Name
2 OF 9
1/1/9999
1
A
8
6
7
5
4
3
2
1
PRODUCTION DRAWINGS D
D
NOTES:
ISO VIEW
1.) MATERIAL: ABS
TOP
2.) FINISH/COLOUR: PLATED 3.) OTHER MFG NOTES: • NO FLASH • NO VISIBLE PARTING LINES • PLATING MUST BE EVEN AND CLEAN.
87.3 C
C
4.) ALL DIMENSIONS ARE IN mm UNLESS OTHERWISE SPECIFIED. 5.) DEFAULT TOLERANCES: X.X 0.5 , X.XX 0.25 , ANGLES 0.25 (unless otherwise specified) 6.) DOCKET:" 9663
65
ADDITIONAL MFG NOTES: A.) MATERIAL VOLUME: 19206.80 mm^3 B.) DATA FILE: 3D DATA FOR TOOLING PROVIDED.
SIDE
B
FRONT
LEVA - TOP CAP
48.5
TITLE:
B SIZE
26
9663
F REV
DWG. NO.
SCALE: 1:1
CL
UNITS: mm Drawings are strictly Design Drawings and not intended to be used for toolmaking purposes. They are not considered final engineering drawings. Specifications for tolerances, tooling and manufacturing are the responsibility of the manufacturer unless otherwise specified.
15
A
B
All copyright, design and other intellectual property rights in the contents hereof are the sole and exclusive property of Umbra Ltd./Umbra Inc. The provision of this document to you does not afford you any ownership, rights or license to use or reproduce same, all of which remains the property of Umbra Ltd./Umbra Inc. Reproduction, storage in a retrieval system, or transmission in any form by any means, whether electronic, mechanical or otherwise, in whole or in part, without the prior written consent of Umbra Ltd. /Umbra Inc. is strictly prohibited.
BOTTOM
DRAWN NAME DATE
8
7
6
5
4
3
2
APPROVED
SHEET
YOUR NAME
3 OF 9
1/1/9999
1
A
8
6
7
5
4
3
2
1
PRODUCTION DRAWINGS D
D
ISO VIEW
TOP
NOTES: 1.) MATERIAL:: ABS
33
83.4
2.) FINISH/COLOUR: PLATED 3.) OTHER MFG NOTES: • •
C
NO FLASH NO VISIBLE PARTING LINE
C
4.) ALL DIMENSIONS ARE IN mm UNLESS OTHERWISE SPECIFIED. 5.) DEFAULT TOLERANCES: X.X 0.5 , X.XX 0.25 , ANGLES 0.25 (unless otherwise specified)
62.3
6.) DOCKET: 9663 ADDITIONAL MFG NOTES: A.) MATERIAL VOLUME: 0.00 mm^3 B.) DATA FILE: 3D FILE PROVIDED FOR TOOLING.
B
SIDE
FRONT
B
LEVA - Cap Frame
15
TITLE:
2.8
B SIZE
CL
26
9663
F REV
DWG. NO.
SCALE: 1:1
UNITS: mm Drawings are strictly Design Drawings and not intended to be used for toolmaking purposes. They are not considered final engineering drawings. Specifications for tolerances, tooling and manufacturing are the responsibility of the manufacturer unless otherwise specified.
A
All copyright, design and other intellectual property rights in the contents hereof are the sole and exclusive property of Umbra Ltd./Umbra Inc. The provision of this document to you does not afford you any ownership, rights or license to use or reproduce same, all of which remains the property of Umbra Ltd./Umbra Inc. Reproduction, storage in a retrieval system, or transmission in any form by any means, whether electronic, mechanical or otherwise, in whole or in part, without the prior written consent of Umbra Ltd. /Umbra Inc. is strictly prohibited.
BOTTOM
DRAWN NAME DATE
8
7
6
5
4
3
2
APPROVED
SHEET
YOUR NAME
4 OF 9
1/1/9999
1
A
8
6
7
5
4
3
2
1
PRODUCTION DRAWINGS
1.7 4.7
D
D
30.3
3 NOTES:
ISO VIEW
1.) MATERIAL: ABS
TOP
2.) FINISH/COLOUR: WHITE 3.) OTHER MFG NOTES: ]
25
C
33.6
• • 3
A
NO SINK NO FLASH
C
4.) ALL DIMENSIONS ARE IN mm UNLESS OTHERWISE SPECIFIED. 5.) DEFAULT TOLERANCES: X.X 0.5 , X.XX 0.25 , ANGLES 0.25 (unless otherwise specified) 6.) DOCKET: 9663
18.5
ADDITIONAL MFG NOTES: A.) MATERIAL VOLUME: 1778.50 mm^3
A B
6.5
SIDE
B.) DATA FILE: 3D FILE PROVIDED FOR TOOLING.
FRONT
SECTION A-A SCALE 3 : 2 TITLE:
Pump Engine Cover
B SIZE
8.5
B
9663
F REV
DWG. NO.
SCALE: 1:1
UNITS: mm Drawings are strictly Design Drawings and not intended to be used for toolmaking purposes. They are not considered final engineering drawings. Specifications for tolerances, tooling and manufacturing are the responsibility of the manufacturer unless otherwise specified.
A
All copyright, design and other intellectual property rights in the contents hereof are the sole and exclusive property of Umbra Ltd./Umbra Inc. The provision of this document to you does not afford you any ownership, rights or license to use or reproduce same, all of which remains the property of Umbra Ltd./Umbra Inc. Reproduction, storage in a retrieval system, or transmission in any form by any means, whether electronic, mechanical or otherwise, in whole or in part, without the prior written consent of Umbra Ltd. /Umbra Inc. is strictly prohibited.
BOTTOM
DRAWN NAME DATE
8
7
6
5
4
3
2
APPROVED
SHEET
YOUR NAME
5 OF 9
1/1/9999
1
A
8
6
7
5
4
2
3
1
PRODUCTION DRAWINGS D
D
NOTES: 1.) MATERIAL: ABS 46.5
2.) FINISH/COLOUR: PLATED / WHITE
ISO VIEW
3.) OTHER MFG NOTES:
TOP
B C
• •
1.5 TYP. MAT'L THK.
14.5
5.) DEFAULT TOLERANCES: X.X 0.5 , X.XX 0.25 , ANGLES 0.25 (unless otherwise specified)
3 8.5
2.6
6.) DOCKET: 9663
ADDITIONAL MFG NOTES:
54.3 4.7
A.) MATERIAL VOLUME: 13286.42 mm^3
29.1
B.) DATA FILE: 3D FILE PROVIDED FOR TOOLING.
9.3
B
40.7
17.3
TITLE:
FRONT
B SIZE
9663 REV
UNITS: mm
CL
Drawings are strictly Design Drawings and not intended to be used for toolmaking purposes. They are not considered final engineering drawings. Specifications for tolerances, tooling and manufacturing are the responsibility of the manufacturer unless otherwise specified.
A
All copyright, design and other intellectual property rights in the contents hereof are the sole and exclusive property of Umbra Ltd./Umbra Inc. The provision of this document to you does not afford you any ownership, rights or license to use or reproduce same, all of which remains the property of Umbra Ltd./Umbra Inc. Reproduction, storage in a retrieval system, or transmission in any form by any means, whether electronic, mechanical or otherwise, in whole or in part, without the prior written consent of Umbra Ltd. /Umbra Inc. is strictly prohibited.
38.6
DRAWN
BOTTOM
NAME DATE
7
6
F
DWG. NO.
SCALE: 1:1
8
B
INNER HOUSING
SECTION B-B
B
SIDE
CL
C
4.) ALL DIMENSIONS ARE IN mm UNLESS OTHERWISE SPECIFIED.
17.9
3
NO FLASH CLEAN PARTING LINES
5
4
3
2
APPROVED
SHEET
YOUR NAME
6 OF 9
1/1/9999
1
A
8
7
6
5
4
3
2
1
PRODUCTION DRAWINGS D
D
NOTES:
TOP
1.) MATERIAL: Stainless steel, 1mm thk. 2.) FINISH/COLOUR: Brushed or Polished
ISO VIEW
3.) OTHER MFG NOTES:
52 52
C
C
50.4
NO SHARP EDGES
C
4.) ALL DIMENSIONS ARE IN mm UNLESS OTHERWISE SPECIFIED. 5.) DEFAULT TOLERANCES: X.X 0.5 , X.XX 0.25 , ANGLES 0.25 (unless otherwise specified) 6.) DOCKET: 9663 100
ADDITIONAL MFG NOTES: A.) MATERIAL VOLUME: 10626.52 mm^3 B.) DATA FILE: 3D data file provided for tooling.
B
70.3
59.2
SIDE
ss cover
SECTION C-C SCALE 1 : 2
C
B
TITLE:
FRONT
B SIZE
9663
f REV
DWG. NO.
SCALE: 1:1
UNITS: mm Drawings are strictly Design Drawings and not intended to be used for toolmaking purposes. They are not considered final engineering drawings. Specifications for tolerances, tooling and manufacturing are the responsibility of the manufacturer unless otherwise specified.
A
All copyright, design and other intellectual property rights in the contents hereof are the sole and exclusive property of Umbra Ltd./Umbra Inc. The provision of this document to you does not afford you any ownership, rights or license to use or reproduce same, all of which remains the property of Umbra Ltd./Umbra Inc. Reproduction, storage in a retrieval system, or transmission in any form by any means, whether electronic, mechanical or otherwise, in whole or in part, without the prior written consent of Umbra Ltd. /Umbra Inc. is strictly prohibited.
BOTTOM
DRAWN NAME DATE
8
7
6
5
4
3
2
APPROVED
SHEET
YOUR NAME
7 OF 9
1/1/9999
1
A
8
6
7
5
4
3
2
1
PRODUCTION DRAWINGS D
D
42.6
NOTES: 1.) MATERIAL: ACRYLIC
39.6
TOP
49.9
2.) FINISH/COLOUR: CLEAR
F
3.) OTHER MFG NOTES:
49.9
C
7.4
• • •
ISO VIEW
6.5
NO BUBBLES NO FLASH NO PARTING LINES
C
4.) ALL DIMENSIONS ARE IN mm UNLESS OTHERWISE SPECIFIED.
28.5
5.) DEFAULT TOLERANCES: X.X 0.5 , X.XX 0.25 , ANGLES 0.25 (unless otherwise specified)
4.4
6.) DOCKET: 9663
98.5
ADDITIONAL MFG NOTES:
129.4
A.) MATERIAL VOLUME: 51254.77 mm^3 B.) DATA FILE: 3D FILE PROVIDED FOR TOOLING
B
0.9 SIDE
MAIN BODY
F
90.9
SECTION F-F SCALE 1 : 2
68.5
SONIC WELD GEOMETRY DETAIL
B
TITLE:
B
FRONT
SIZE
9663
F REV
DWG. NO.
SCALE: 1:1
UNITS: mm Drawings are strictly Design Drawings and not intended to be used for toolmaking purposes. They are not considered final engineering drawings. Specifications for tolerances, tooling and manufacturing are the responsibility of the manufacturer unless otherwise specified.
A
All copyright, design and other intellectual property rights in the contents hereof are the sole and exclusive property of Umbra Ltd./Umbra Inc. The provision of this document to you does not afford you any ownership, rights or license to use or reproduce same, all of which remains the property of Umbra Ltd./Umbra Inc. Reproduction, storage in a retrieval system, or transmission in any form by any means, whether electronic, mechanical or otherwise, in whole or in part, without the prior written consent of Umbra Ltd. /Umbra Inc. is strictly prohibited. DRAWN
BOTTOM
NAME DATE
8
7
6
5
4
3
2
APPROVED
SHEET
YOUR NAME
8 OF 9
1/1/9999
1
A
8
6
7
5
4
2
3
1
PRODUCTION DRAWINGS D
D
NOTES: ISO VIEW
1.) MATERIAL: ACRYLIC 2.) FINISH/COLOUR: CLEAR 3.) OTHER MFG NOTES: • • •
TOP C
NO BUBBLES NO FLASH NO PARTING LINES
C
4.) ALL DIMENSIONS ARE IN mm UNLESS OTHERWISE SPECIFIED.
G
5.) DEFAULT TOLERANCES: X.X 0.5 , X.XX 0.25 , ANGLES 0.25 (unless otherwise specified)
1.7 1
6.) DOCKET: 9663
16
ADDITIONAL MFG NOTES: A.) MATERIAL VOLUME: 34876.38 mm^3
B
CL
G
100.7 SIDE
76.3
B.) DATA FILE: 3D FILE PROVIDED FOR TOOLING.
13
86.2
SECTION G-G SCALE 2 : 3
FRONT
B
BOTTOM CAP TITLE:
B SIZE
9663
F REV
DWG. NO.
SCALE: 1:1
UNITS: mm Drawings are strictly Design Drawings and not intended to be used for toolmaking purposes. They are not considered final engineering drawings. Specifications for tolerances, tooling and manufacturing are the responsibility of the manufacturer unless otherwise specified.
A
All copyright, design and other intellectual property rights in the contents hereof are the sole and exclusive property of Umbra Ltd./Umbra Inc. The provision of this document to you does not afford you any ownership, rights or license to use or reproduce same, all of which remains the property of Umbra Ltd./Umbra Inc. Reproduction, storage in a retrieval system, or transmission in any form by any means, whether electronic, mechanical or otherwise, in whole or in part, without the prior written consent of Umbra Ltd. /Umbra Inc. is strictly prohibited.
BOTTOM
DRAWN NAME DATE
8
7
6
5
4
3
2
APPROVED
SHEET
YOUR NAME
9 OF 9
1/1/9999
1
A
6
7
5
4
3
2
1
DATE
PRODUCTION DRAWINGS
APPROVED
Feb 2008
REV
F
REVISION DESCRIPTION
Final Tooled Data - Feb 2008 D
D
NOTES: 1.) MATERIAL: SS, Acrylic & ABS
TOP
2.) FINISH/COLOUR: Clear, SS 3.) OTHER MFG NOTES:
110.5
4.) ALL DIMENSIONS ARE IN mm UNLESS OTHERWISE SPECIFIED. 5.) DEFAULT TOLERANCES: X.X 0.5 , X.XX 0.25 , ANGLES 0.25 (unless otherwise specified)
C
C
6.) DOCKET:: 9663
212.7 ISO VIEW
B
B
LEVA SOAP PUMP TITLE:
76.8
FRONT
B
SIDE VIEW
SIZE
9663
F REV
DWG. NO.
SCALE: 1:5
UNITS: mm Drawings are strictly Design Drawings and not intended to be used for toolmaking purposes. They are not considered final engineering drawings. Specifications for tolerances, tooling and manufacturing are the responsibility of the manufacturer unless otherwise specified.
A
All copyright, design and other intellectual property rights in the contents hereof are the sole and exclusive property of Umbra Ltd./Umbra Inc. The provision of this document to you does not afford you any ownership, rights or license to use or reproduce same, all of which remains the property of Umbra Ltd./Umbra Inc. Reproduction, storage in a retrieval system, or transmission in any form by any means, whether electronic, mechanical or otherwise, in whole or in part, without the prior written consent of Umbra Ltd. /Umbra Inc. is strictly prohibited. DRAWN
BOTTOM VIEW
NAME DATE
8
7
6
5
4
3
2
APPROVED
SHEET
Your Name
1 OF 9
1/1/9999
1
A
8
6
7
5
4
2
3
PRODUCTION DRAWINGS
6
D
7
ITEM NO.
PART NUMBER
MATERIAL
QTY.
ASSEMBLED VIA SELF PHILLIPS HEAD THREADING SCREWS
1
SS COVER
STAINLESS STEEL
1
2
ACRYLIC BODY
CLEAR ACRYLIC
1
STEP 1
3
BOTTOM CAP
CLEAR ACRYLIC
1
4
PUMP ENGINE COVER
WHITE ABS
1
5
INNER HOUSING
ABS
1
6
TOP CAP
PLATED ABS
1
7
TOP CAP FRAME
ABS
1
4
C
1
D
PUMP COVER ASSEMBLY IS SNAP FIT INTO INNER COVER FROM REAR CLIP FEATURE. STEP 4
5
C
1
SS COVER FIT OVER ACRYLIC BODY PERMANENTLY ATTACHED WITH ADHESIVE
B
B
STEP 3
LEVA SOAP PUMP
TITLE:
2
SONIC WELD MUST BE A HERMETIC SEAL STEP 2
B SIZE
9663
F REV
DWG. NO.
SCALE: 1:1
UNITS: mm Drawings are strictly Design Drawings and not intended to be used for toolmaking purposes. They are not considered final engineering drawings. Specifications for tolerances, tooling and manufacturing are the responsibility of the manufacturer unless otherwise specified.
A
All copyright, design and other intellectual property rights in the contents hereof are the sole and exclusive property of Umbra Ltd./Umbra Inc. The provision of this document to you does not afford you any ownership, rights or license to use or reproduce same, all of which remains the property of Umbra Ltd./Umbra Inc. Reproduction, storage in a retrieval system, or transmission in any form by any means, whether electronic, mechanical or otherwise, in whole or in part, without the prior written consent of Umbra Ltd. /Umbra Inc. is strictly prohibited.
3
DRAWN NAME DATE
8
7
6
5
4
3
2
APPROVED
SHEET
Your Name
2 OF 9
1/1/9999
1
A
8
6
7
5
4
3
2
1
PRODUCTION DRAWINGS D
D
NOTES:
ISO VIEW
1.) MATERIAL: ABS
TOP
2.) FINISH/COLOUR: PLATED 3.) OTHER MFG NOTES: • NO FLASH • NO VISIBLE PARTING LINES • PLATING MUST BE EVEN AND CLEAN.
87.3 C
C
4.) ALL DIMENSIONS ARE IN mm UNLESS OTHERWISE SPECIFIED. 5.) DEFAULT TOLERANCES: X.X 0.5 , X.XX 0.25 , ANGLES 0.25 (unless otherwise specified) 6.) DOCKET:" 9663
65
ADDITIONAL MFG NOTES: A.) MATERIAL VOLUME: 19206.80 mm^3 B.) DATA FILE: 3D DATA FOR TOOLING PROVIDED.
SIDE
B
FRONT
LEVA - TOP CAP
48.5
TITLE:
B SIZE
26
9663
F REV
DWG. NO.
SCALE: 1:1
CL
UNITS: mm Drawings are strictly Design Drawings and not intended to be used for toolmaking purposes. They are not considered final engineering drawings. Specifications for tolerances, tooling and manufacturing are the responsibility of the manufacturer unless otherwise specified.
15
A
B
All copyright, design and other intellectual property rights in the contents hereof are the sole and exclusive property of Umbra Ltd./Umbra Inc. The provision of this document to you does not afford you any ownership, rights or license to use or reproduce same, all of which remains the property of Umbra Ltd./Umbra Inc. Reproduction, storage in a retrieval system, or transmission in any form by any means, whether electronic, mechanical or otherwise, in whole or in part, without the prior written consent of Umbra Ltd. /Umbra Inc. is strictly prohibited.
BOTTOM
DRAWN NAME DATE
8
7
6
5
4
3
2
APPROVED
SHEET
YOUR NAME
3 OF 9
1/1/9999
1
A
8
6
7
5
4
3
2
1
PRODUCTION DRAWINGS D
D
ISO VIEW
TOP
NOTES: 1.) MATERIAL:: ABS
33
83.4
2.) FINISH/COLOUR: PLATED 3.) OTHER MFG NOTES: • •
C
NO FLASH NO VISIBLE PARTING LINE
C
4.) ALL DIMENSIONS ARE IN mm UNLESS OTHERWISE SPECIFIED. 5.) DEFAULT TOLERANCES: X.X 0.5 , X.XX 0.25 , ANGLES 0.25 (unless otherwise specified)
62.3
6.) DOCKET: 9663 ADDITIONAL MFG NOTES: A.) MATERIAL VOLUME: 0.00 mm^3 B.) DATA FILE: 3D FILE PROVIDED FOR TOOLING.
B
SIDE
FRONT
B
LEVA - Cap Frame
15
TITLE:
2.8
B SIZE
CL
26
9663
F REV
DWG. NO.
SCALE: 1:1
UNITS: mm Drawings are strictly Design Drawings and not intended to be used for toolmaking purposes. They are not considered final engineering drawings. Specifications for tolerances, tooling and manufacturing are the responsibility of the manufacturer unless otherwise specified.
A
All copyright, design and other intellectual property rights in the contents hereof are the sole and exclusive property of Umbra Ltd./Umbra Inc. The provision of this document to you does not afford you any ownership, rights or license to use or reproduce same, all of which remains the property of Umbra Ltd./Umbra Inc. Reproduction, storage in a retrieval system, or transmission in any form by any means, whether electronic, mechanical or otherwise, in whole or in part, without the prior written consent of Umbra Ltd. /Umbra Inc. is strictly prohibited.
BOTTOM
DRAWN NAME DATE
8
7
6
5
4
3
2
APPROVED
SHEET
YOUR NAME
4 OF 9
1/1/9999
1
A
8
6
7
5
4
3
2
1
PRODUCTION DRAWINGS
1.7 4.7
D
D
30.3
3 NOTES:
ISO VIEW
1.) MATERIAL: ABS
TOP
2.) FINISH/COLOUR: WHITE 3.) OTHER MFG NOTES: ]
25
C
33.6
• • 3
A
NO SINK NO FLASH
C
4.) ALL DIMENSIONS ARE IN mm UNLESS OTHERWISE SPECIFIED. 5.) DEFAULT TOLERANCES: X.X 0.5 , X.XX 0.25 , ANGLES 0.25 (unless otherwise specified) 6.) DOCKET: 9663
18.5
ADDITIONAL MFG NOTES: A.) MATERIAL VOLUME: 1778.50 mm^3
A B
6.5
SIDE
B.) DATA FILE: 3D FILE PROVIDED FOR TOOLING.
FRONT
SECTION A-A SCALE 3 : 2 TITLE:
Pump Engine Cover
B SIZE
8.5
B
9663
F REV
DWG. NO.
SCALE: 1:1
UNITS: mm Drawings are strictly Design Drawings and not intended to be used for toolmaking purposes. They are not considered final engineering drawings. Specifications for tolerances, tooling and manufacturing are the responsibility of the manufacturer unless otherwise specified.
A
All copyright, design and other intellectual property rights in the contents hereof are the sole and exclusive property of Umbra Ltd./Umbra Inc. The provision of this document to you does not afford you any ownership, rights or license to use or reproduce same, all of which remains the property of Umbra Ltd./Umbra Inc. Reproduction, storage in a retrieval system, or transmission in any form by any means, whether electronic, mechanical or otherwise, in whole or in part, without the prior written consent of Umbra Ltd. /Umbra Inc. is strictly prohibited.
BOTTOM
DRAWN NAME DATE
8
7
6
5
4
3
2
APPROVED
SHEET
YOUR NAME
5 OF 9
1/1/9999
1
A
8
6
7
5
4
2
3
1
PRODUCTION DRAWINGS D
D
NOTES: 1.) MATERIAL: ABS 46.5
2.) FINISH/COLOUR: PLATED / WHITE
ISO VIEW
3.) OTHER MFG NOTES:
TOP
B C
• •
1.5 TYP. MAT'L THK.
14.5
5.) DEFAULT TOLERANCES: X.X 0.5 , X.XX 0.25 , ANGLES 0.25 (unless otherwise specified)
3 8.5
2.6
6.) DOCKET: 9663
ADDITIONAL MFG NOTES:
54.3 4.7
A.) MATERIAL VOLUME: 13286.42 mm^3
29.1
B.) DATA FILE: 3D FILE PROVIDED FOR TOOLING.
9.3
B
40.7
17.3
TITLE:
FRONT
B SIZE
9663 REV
UNITS: mm
CL
Drawings are strictly Design Drawings and not intended to be used for toolmaking purposes. They are not considered final engineering drawings. Specifications for tolerances, tooling and manufacturing are the responsibility of the manufacturer unless otherwise specified.
A
All copyright, design and other intellectual property rights in the contents hereof are the sole and exclusive property of Umbra Ltd./Umbra Inc. The provision of this document to you does not afford you any ownership, rights or license to use or reproduce same, all of which remains the property of Umbra Ltd./Umbra Inc. Reproduction, storage in a retrieval system, or transmission in any form by any means, whether electronic, mechanical or otherwise, in whole or in part, without the prior written consent of Umbra Ltd. /Umbra Inc. is strictly prohibited.
38.6
DRAWN
BOTTOM
NAME DATE
7
6
F
DWG. NO.
SCALE: 1:1
8
B
INNER HOUSING
SECTION B-B
B
SIDE
CL
C
4.) ALL DIMENSIONS ARE IN mm UNLESS OTHERWISE SPECIFIED.
17.9
3
NO FLASH CLEAN PARTING LINES
5
4
3
2
APPROVED
SHEET
YOUR NAME
6 OF 9
1/1/9999
1
A
8
7
6
5
4
3
2
1
PRODUCTION DRAWINGS D
D
NOTES:
TOP
1.) MATERIAL: Stainless steel, 1mm thk. 2.) FINISH/COLOUR: Brushed or Polished
ISO VIEW
3.) OTHER MFG NOTES:
52 52
C
C
50.4
NO SHARP EDGES
C
4.) ALL DIMENSIONS ARE IN mm UNLESS OTHERWISE SPECIFIED. 5.) DEFAULT TOLERANCES: X.X 0.5 , X.XX 0.25 , ANGLES 0.25 (unless otherwise specified) 6.) DOCKET: 9663 100
ADDITIONAL MFG NOTES: A.) MATERIAL VOLUME: 10626.52 mm^3 B.) DATA FILE: 3D data file provided for tooling.
B
70.3
59.2
SIDE
ss cover
SECTION C-C SCALE 1 : 2
C
B
TITLE:
FRONT
B SIZE
9663
f REV
DWG. NO.
SCALE: 1:1
UNITS: mm Drawings are strictly Design Drawings and not intended to be used for toolmaking purposes. They are not considered final engineering drawings. Specifications for tolerances, tooling and manufacturing are the responsibility of the manufacturer unless otherwise specified.
A
All copyright, design and other intellectual property rights in the contents hereof are the sole and exclusive property of Umbra Ltd./Umbra Inc. The provision of this document to you does not afford you any ownership, rights or license to use or reproduce same, all of which remains the property of Umbra Ltd./Umbra Inc. Reproduction, storage in a retrieval system, or transmission in any form by any means, whether electronic, mechanical or otherwise, in whole or in part, without the prior written consent of Umbra Ltd. /Umbra Inc. is strictly prohibited.
BOTTOM
DRAWN NAME DATE
8
7
6
5
4
3
2
APPROVED
SHEET
YOUR NAME
7 OF 9
1/1/9999
1
A
8
6
7
5
4
3
2
1
PRODUCTION DRAWINGS D
D
42.6
NOTES: 1.) MATERIAL: ACRYLIC
39.6
TOP
49.9
2.) FINISH/COLOUR: CLEAR
F
3.) OTHER MFG NOTES:
49.9
C
7.4
• • •
ISO VIEW
6.5
NO BUBBLES NO FLASH NO PARTING LINES
C
4.) ALL DIMENSIONS ARE IN mm UNLESS OTHERWISE SPECIFIED.
28.5
5.) DEFAULT TOLERANCES: X.X 0.5 , X.XX 0.25 , ANGLES 0.25 (unless otherwise specified)
4.4
6.) DOCKET: 9663
98.5
ADDITIONAL MFG NOTES:
129.4
A.) MATERIAL VOLUME: 51254.77 mm^3 B.) DATA FILE: 3D FILE PROVIDED FOR TOOLING
B
0.9 SIDE
MAIN BODY
F
90.9
SECTION F-F SCALE 1 : 2
68.5
SONIC WELD GEOMETRY DETAIL
B
TITLE:
B
FRONT
SIZE
9663
F REV
DWG. NO.
SCALE: 1:1
UNITS: mm Drawings are strictly Design Drawings and not intended to be used for toolmaking purposes. They are not considered final engineering drawings. Specifications for tolerances, tooling and manufacturing are the responsibility of the manufacturer unless otherwise specified.
A
All copyright, design and other intellectual property rights in the contents hereof are the sole and exclusive property of Umbra Ltd./Umbra Inc. The provision of this document to you does not afford you any ownership, rights or license to use or reproduce same, all of which remains the property of Umbra Ltd./Umbra Inc. Reproduction, storage in a retrieval system, or transmission in any form by any means, whether electronic, mechanical or otherwise, in whole or in part, without the prior written consent of Umbra Ltd. /Umbra Inc. is strictly prohibited. DRAWN
BOTTOM
NAME DATE
8
7
6
5
4
3
2
APPROVED
SHEET
YOUR NAME
8 OF 9
1/1/9999
1
A
8
6
7
5
4
2
3
1
PRODUCTION DRAWINGS D
D
NOTES: ISO VIEW
1.) MATERIAL: ACRYLIC 2.) FINISH/COLOUR: CLEAR 3.) OTHER MFG NOTES: • • •
TOP C
NO BUBBLES NO FLASH NO PARTING LINES
C
4.) ALL DIMENSIONS ARE IN mm UNLESS OTHERWISE SPECIFIED.
G
5.) DEFAULT TOLERANCES: X.X 0.5 , X.XX 0.25 , ANGLES 0.25 (unless otherwise specified)
1.7 1
6.) DOCKET: 9663
16
ADDITIONAL MFG NOTES: A.) MATERIAL VOLUME: 34876.38 mm^3
B
CL
G
100.7 SIDE
76.3
B.) DATA FILE: 3D FILE PROVIDED FOR TOOLING.
13
86.2
SECTION G-G SCALE 2 : 3
FRONT
B
BOTTOM CAP TITLE:
B SIZE
9663
F REV
DWG. NO.
SCALE: 1:1
UNITS: mm Drawings are strictly Design Drawings and not intended to be used for toolmaking purposes. They are not considered final engineering drawings. Specifications for tolerances, tooling and manufacturing are the responsibility of the manufacturer unless otherwise specified.
A
All copyright, design and other intellectual property rights in the contents hereof are the sole and exclusive property of Umbra Ltd./Umbra Inc. The provision of this document to you does not afford you any ownership, rights or license to use or reproduce same, all of which remains the property of Umbra Ltd./Umbra Inc. Reproduction, storage in a retrieval system, or transmission in any form by any means, whether electronic, mechanical or otherwise, in whole or in part, without the prior written consent of Umbra Ltd. /Umbra Inc. is strictly prohibited.
BOTTOM
DRAWN NAME DATE
8
7
6
5
4
3
2
APPROVED
SHEET
YOUR NAME
9 OF 9
1/1/9999
1
A
Related Documents
Leva Pump 2ddrafting
November 2019 7
Tami Leva
December 2019 10
Pump
November 2019 31
Pump
May 2020 16
Vai Leva Coracao
November 2019 7